2
0
mirror of https://github.com/edk2-porting/linux-next.git synced 2024-12-23 12:43:55 +08:00
linux-next/arch/arm/mach-kirkwood/board-dreamplug.c
Andrew Lunn 2cef1a2853 ARM: Kirkwood: Use DT to configure SATA device.
Convert boards using DT, but the old way of configuring SATA to now
use properties in there DT file.

Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Tested-by: Simon Baatz <gmbnomis@gmail.com>
2012-07-27 16:49:29 +02:00

106 lines
2.4 KiB
C

/*
* Copyright 2012 (C), Jason Cooper <jason@lakedaemon.net>
*
* arch/arm/mach-kirkwood/board-dreamplug.c
*
* Marvell DreamPlug Reference Board Init for drivers not converted to
* flattened device tree yet.
*
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without any
* warranty of any kind, whether express or implied.
*/
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/platform_device.h>
#include <linux/ata_platform.h>
#include <linux/mv643xx_eth.h>
#include <linux/of.h>
#include <linux/of_address.h>
#include <linux/of_fdt.h>
#include <linux/of_irq.h>
#include <linux/of_platform.h>
#include <linux/gpio.h>
#include <linux/leds.h>
#include <linux/mtd/physmap.h>
#include <linux/spi/flash.h>
#include <linux/spi/spi.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
#include <mach/kirkwood.h>
#include <mach/bridge-regs.h>
#include <plat/mvsdio.h>
#include "common.h"
#include "mpp.h"
static struct mv643xx_eth_platform_data dreamplug_ge00_data = {
.phy_addr = MV643XX_ETH_PHY_ADDR(0),
};
static struct mv643xx_eth_platform_data dreamplug_ge01_data = {
.phy_addr = MV643XX_ETH_PHY_ADDR(1),
};
static struct mvsdio_platform_data dreamplug_mvsdio_data = {
/* unfortunately the CD signal has not been connected */
};
static struct gpio_led dreamplug_led_pins[] = {
{
.name = "dreamplug:blue:bluetooth",
.gpio = 47,
.active_low = 1,
},
{
.name = "dreamplug:green:wifi",
.gpio = 48,
.active_low = 1,
},
{
.name = "dreamplug:green:wifi_ap",
.gpio = 49,
.active_low = 1,
},
};
static struct gpio_led_platform_data dreamplug_led_data = {
.leds = dreamplug_led_pins,
.num_leds = ARRAY_SIZE(dreamplug_led_pins),
};
static struct platform_device dreamplug_leds = {
.name = "leds-gpio",
.id = -1,
.dev = {
.platform_data = &dreamplug_led_data,
}
};
static unsigned int dreamplug_mpp_config[] __initdata = {
MPP0_SPI_SCn,
MPP1_SPI_MOSI,
MPP2_SPI_SCK,
MPP3_SPI_MISO,
MPP47_GPIO, /* Bluetooth LED */
MPP48_GPIO, /* Wifi LED */
MPP49_GPIO, /* Wifi AP LED */
0
};
void __init dreamplug_init(void)
{
/*
* Basic setup. Needs to be called early.
*/
kirkwood_mpp_conf(dreamplug_mpp_config);
kirkwood_ehci_init();
kirkwood_ge00_init(&dreamplug_ge00_data);
kirkwood_ge01_init(&dreamplug_ge01_data);
kirkwood_sdio_init(&dreamplug_mvsdio_data);
platform_device_register(&dreamplug_leds);
}