mirror of
https://github.com/edk2-porting/linux-next.git
synced 2024-12-28 23:23:55 +08:00
b5f034845e
These two lines are active high, not active low. The bug was
found when we changed the kernel to respect the polarity defined
in the device tree.
Fixes: 1b90e06b14 ("ARM: kirkwood: Use devicetree to define DNS-32[05] fan")
Cc: Jamie Lentin <jm@lentin.co.uk>
Cc: Guenter Roeck <linux@roeck-us.net>
Cc: Jason Cooper <jason@lakedaemon.net>
Cc: Andrew Lunn <andrew@lunn.ch>
Cc: Gregory Clement <gregory.clement@bootlin.com>
Cc: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Cc: Julien D'Ascenzio <jdascenzio@posteo.net>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Tested-by: Jamie Lentin <jm@lentin.co.uk>
Reported-by: Julien D'Ascenzio <jdascenzio@posteo.net>
Tested-by: Julien D'Ascenzio <jdascenzio@posteo.net>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
236 lines
5.1 KiB
Plaintext
236 lines
5.1 KiB
Plaintext
// SPDX-License-Identifier: GPL-2.0
|
|
#include "kirkwood.dtsi"
|
|
#include "kirkwood-6281.dtsi"
|
|
|
|
/ {
|
|
model = "D-Link DNS NASes (kirkwood-based)";
|
|
compatible = "dlink,dns-kirkwood", "marvell,kirkwood-88f6281", "marvell,kirkwood";
|
|
|
|
gpio_keys {
|
|
compatible = "gpio-keys";
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
pinctrl-0 = <&pmx_button_power &pmx_button_unmount
|
|
&pmx_button_reset>;
|
|
pinctrl-names = "default";
|
|
|
|
power {
|
|
label = "Power button";
|
|
linux,code = <KEY_POWER>;
|
|
gpios = <&gpio1 2 GPIO_ACTIVE_LOW>;
|
|
};
|
|
eject {
|
|
label = "USB unmount button";
|
|
linux,code = <KEY_EJECTCD>;
|
|
gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
|
|
};
|
|
reset {
|
|
label = "Reset button";
|
|
linux,code = <KEY_RESTART>;
|
|
gpios = <&gpio1 16 GPIO_ACTIVE_LOW>;
|
|
};
|
|
};
|
|
|
|
gpio_fan {
|
|
/* Fan: ADDA AD045HB-G73 40mm 6000rpm@5v */
|
|
compatible = "gpio-fan";
|
|
pinctrl-0 = <&pmx_fan_high_speed &pmx_fan_low_speed>;
|
|
pinctrl-names = "default";
|
|
gpios = <&gpio1 14 GPIO_ACTIVE_HIGH
|
|
&gpio1 13 GPIO_ACTIVE_HIGH>;
|
|
gpio-fan,speed-map = <0 0
|
|
3000 1
|
|
6000 2>;
|
|
};
|
|
|
|
gpio_poweroff {
|
|
compatible = "gpio-poweroff";
|
|
pinctrl-0 = <&pmx_power_off>;
|
|
pinctrl-names = "default";
|
|
gpios = <&gpio1 4 GPIO_ACTIVE_HIGH>;
|
|
};
|
|
|
|
ocp@f1000000 {
|
|
pinctrl: pin-controller@10000 {
|
|
|
|
pinctrl-0 = <&pmx_power_back_on &pmx_present_sata0
|
|
&pmx_present_sata1 &pmx_fan_tacho
|
|
&pmx_temp_alarm>;
|
|
pinctrl-names = "default";
|
|
|
|
pmx_sata0: pmx-sata0 {
|
|
marvell,pins = "mpp20";
|
|
marvell,function = "sata1";
|
|
};
|
|
pmx_sata1: pmx-sata1 {
|
|
marvell,pins = "mpp21";
|
|
marvell,function = "sata0";
|
|
};
|
|
pmx_led_power: pmx-led-power {
|
|
marvell,pins = "mpp26";
|
|
marvell,function = "gpio";
|
|
};
|
|
pmx_led_red_right_hdd: pmx-led-red-right-hdd {
|
|
marvell,pins = "mpp27";
|
|
marvell,function = "gpio";
|
|
};
|
|
pmx_led_red_left_hdd: pmx-led-red-left-hdd {
|
|
marvell,pins = "mpp28";
|
|
marvell,function = "gpio";
|
|
};
|
|
pmx_led_red_usb_325: pmx-led-red-usb-325 {
|
|
marvell,pins = "mpp29";
|
|
marvell,function = "gpio";
|
|
};
|
|
pmx_button_power: pmx-button-power {
|
|
marvell,pins = "mpp34";
|
|
marvell,function = "gpio";
|
|
};
|
|
pmx_led_red_usb_320: pmx-led-red-usb-320 {
|
|
marvell,pins = "mpp35";
|
|
marvell,function = "gpio";
|
|
};
|
|
pmx_power_off: pmx-power-off {
|
|
marvell,pins = "mpp36";
|
|
marvell,function = "gpio";
|
|
};
|
|
pmx_power_back_on: pmx-power-back-on {
|
|
marvell,pins = "mpp37";
|
|
marvell,function = "gpio";
|
|
};
|
|
pmx_power_sata0: pmx-power-sata0 {
|
|
marvell,pins = "mpp39";
|
|
marvell,function = "gpio";
|
|
};
|
|
pmx_power_sata1: pmx-power-sata1 {
|
|
marvell,pins = "mpp40";
|
|
marvell,function = "gpio";
|
|
};
|
|
pmx_present_sata0: pmx-present-sata0 {
|
|
marvell,pins = "mpp41";
|
|
marvell,function = "gpio";
|
|
};
|
|
pmx_present_sata1: pmx-present-sata1 {
|
|
marvell,pins = "mpp42";
|
|
marvell,function = "gpio";
|
|
};
|
|
pmx_led_white_usb: pmx-led-white-usb {
|
|
marvell,pins = "mpp43";
|
|
marvell,function = "gpio";
|
|
};
|
|
pmx_fan_tacho: pmx-fan-tacho {
|
|
marvell,pins = "mpp44";
|
|
marvell,function = "gpio";
|
|
};
|
|
pmx_fan_high_speed: pmx-fan-high-speed {
|
|
marvell,pins = "mpp45";
|
|
marvell,function = "gpio";
|
|
};
|
|
pmx_fan_low_speed: pmx-fan-low-speed {
|
|
marvell,pins = "mpp46";
|
|
marvell,function = "gpio";
|
|
};
|
|
pmx_button_unmount: pmx-button-unmount {
|
|
marvell,pins = "mpp47";
|
|
marvell,function = "gpio";
|
|
};
|
|
pmx_button_reset: pmx-button-reset {
|
|
marvell,pins = "mpp48";
|
|
marvell,function = "gpio";
|
|
};
|
|
pmx_temp_alarm: pmx-temp-alarm {
|
|
marvell,pins = "mpp49";
|
|
marvell,function = "gpio";
|
|
};
|
|
};
|
|
sata@80000 {
|
|
pinctrl-0 = <&pmx_sata0 &pmx_sata1>;
|
|
pinctrl-names = "default";
|
|
status = "okay";
|
|
nr-ports = <2>;
|
|
};
|
|
};
|
|
|
|
regulators {
|
|
compatible = "simple-bus";
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
pinctrl-0 = <&pmx_power_sata0 &pmx_power_sata1>;
|
|
pinctrl-names = "default";
|
|
|
|
sata0_power: regulator@1 {
|
|
compatible = "regulator-fixed";
|
|
reg = <1>;
|
|
regulator-name = "SATA0 Power";
|
|
regulator-min-microvolt = <5000000>;
|
|
regulator-max-microvolt = <5000000>;
|
|
enable-active-high;
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
gpio = <&gpio1 7 0>;
|
|
};
|
|
sata1_power: regulator@2 {
|
|
compatible = "regulator-fixed";
|
|
reg = <2>;
|
|
regulator-name = "SATA1 Power";
|
|
regulator-min-microvolt = <5000000>;
|
|
regulator-max-microvolt = <5000000>;
|
|
enable-active-high;
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
gpio = <&gpio1 8 0>;
|
|
};
|
|
};
|
|
};
|
|
|
|
&nand {
|
|
status = "okay";
|
|
chip-delay = <35>;
|
|
|
|
partition@0 {
|
|
label = "u-boot";
|
|
reg = <0x0000000 0x100000>;
|
|
read-only;
|
|
};
|
|
|
|
partition@100000 {
|
|
label = "uImage";
|
|
reg = <0x0100000 0x500000>;
|
|
};
|
|
|
|
partition@600000 {
|
|
label = "ramdisk";
|
|
reg = <0x0600000 0x500000>;
|
|
};
|
|
|
|
partition@b00000 {
|
|
label = "image";
|
|
reg = <0x0b00000 0x6600000>;
|
|
};
|
|
|
|
partition@7100000 {
|
|
label = "mini firmware";
|
|
reg = <0x7100000 0xa00000>;
|
|
};
|
|
|
|
partition@7b00000 {
|
|
label = "config";
|
|
reg = <0x7b00000 0x500000>;
|
|
};
|
|
};
|
|
|
|
&mdio {
|
|
status = "okay";
|
|
|
|
ethphy0: ethernet-phy@8 {
|
|
reg = <8>;
|
|
};
|
|
};
|
|
|
|
ð0 {
|
|
status = "okay";
|
|
ethernet0-port@0 {
|
|
phy-handle = <ðphy0>;
|
|
};
|
|
};
|