mirror of
https://github.com/edk2-porting/linux-next.git
synced 2024-12-20 03:04:01 +08:00
dc4805c2e7
Since ENABLE and BYPASS bits of PLLs are now implemented as separate gate and mux clocks by clock drivers, the code handling these two bits can be removed from clk-pllv3 driver. Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
333 lines
7.7 KiB
C
333 lines
7.7 KiB
C
/*
|
|
* Copyright 2012 Freescale Semiconductor, Inc.
|
|
* Copyright 2012 Linaro Ltd.
|
|
*
|
|
* The code contained herein is licensed under the GNU General Public
|
|
* License. You may obtain a copy of the GNU General Public License
|
|
* Version 2 or later at the following locations:
|
|
*
|
|
* http://www.opensource.org/licenses/gpl-license.html
|
|
* http://www.gnu.org/copyleft/gpl.html
|
|
*/
|
|
|
|
#include <linux/clk.h>
|
|
#include <linux/clk-provider.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/io.h>
|
|
#include <linux/slab.h>
|
|
#include <linux/jiffies.h>
|
|
#include <linux/err.h>
|
|
#include "clk.h"
|
|
|
|
#define PLL_NUM_OFFSET 0x10
|
|
#define PLL_DENOM_OFFSET 0x20
|
|
|
|
#define BM_PLL_POWER (0x1 << 12)
|
|
#define BM_PLL_LOCK (0x1 << 31)
|
|
|
|
/**
|
|
* struct clk_pllv3 - IMX PLL clock version 3
|
|
* @clk_hw: clock source
|
|
* @base: base address of PLL registers
|
|
* @powerup_set: set POWER bit to power up the PLL
|
|
* @div_mask: mask of divider bits
|
|
*
|
|
* IMX PLL clock version 3, found on i.MX6 series. Divider for pllv3
|
|
* is actually a multiplier, and always sits at bit 0.
|
|
*/
|
|
struct clk_pllv3 {
|
|
struct clk_hw hw;
|
|
void __iomem *base;
|
|
bool powerup_set;
|
|
u32 div_mask;
|
|
};
|
|
|
|
#define to_clk_pllv3(_hw) container_of(_hw, struct clk_pllv3, hw)
|
|
|
|
static int clk_pllv3_wait_lock(struct clk_pllv3 *pll)
|
|
{
|
|
unsigned long timeout = jiffies + msecs_to_jiffies(10);
|
|
u32 val = readl_relaxed(pll->base) & BM_PLL_POWER;
|
|
|
|
/* No need to wait for lock when pll is not powered up */
|
|
if ((pll->powerup_set && !val) || (!pll->powerup_set && val))
|
|
return 0;
|
|
|
|
/* Wait for PLL to lock */
|
|
do {
|
|
if (readl_relaxed(pll->base) & BM_PLL_LOCK)
|
|
break;
|
|
if (time_after(jiffies, timeout))
|
|
break;
|
|
usleep_range(50, 500);
|
|
} while (1);
|
|
|
|
return readl_relaxed(pll->base) & BM_PLL_LOCK ? 0 : -ETIMEDOUT;
|
|
}
|
|
|
|
static int clk_pllv3_prepare(struct clk_hw *hw)
|
|
{
|
|
struct clk_pllv3 *pll = to_clk_pllv3(hw);
|
|
u32 val;
|
|
int ret;
|
|
|
|
val = readl_relaxed(pll->base);
|
|
if (pll->powerup_set)
|
|
val |= BM_PLL_POWER;
|
|
else
|
|
val &= ~BM_PLL_POWER;
|
|
writel_relaxed(val, pll->base);
|
|
|
|
ret = clk_pllv3_wait_lock(pll);
|
|
if (ret)
|
|
return ret;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void clk_pllv3_unprepare(struct clk_hw *hw)
|
|
{
|
|
struct clk_pllv3 *pll = to_clk_pllv3(hw);
|
|
u32 val;
|
|
|
|
val = readl_relaxed(pll->base);
|
|
if (pll->powerup_set)
|
|
val &= ~BM_PLL_POWER;
|
|
else
|
|
val |= BM_PLL_POWER;
|
|
writel_relaxed(val, pll->base);
|
|
}
|
|
|
|
static unsigned long clk_pllv3_recalc_rate(struct clk_hw *hw,
|
|
unsigned long parent_rate)
|
|
{
|
|
struct clk_pllv3 *pll = to_clk_pllv3(hw);
|
|
u32 div = readl_relaxed(pll->base) & pll->div_mask;
|
|
|
|
return (div == 1) ? parent_rate * 22 : parent_rate * 20;
|
|
}
|
|
|
|
static long clk_pllv3_round_rate(struct clk_hw *hw, unsigned long rate,
|
|
unsigned long *prate)
|
|
{
|
|
unsigned long parent_rate = *prate;
|
|
|
|
return (rate >= parent_rate * 22) ? parent_rate * 22 :
|
|
parent_rate * 20;
|
|
}
|
|
|
|
static int clk_pllv3_set_rate(struct clk_hw *hw, unsigned long rate,
|
|
unsigned long parent_rate)
|
|
{
|
|
struct clk_pllv3 *pll = to_clk_pllv3(hw);
|
|
u32 val, div;
|
|
|
|
if (rate == parent_rate * 22)
|
|
div = 1;
|
|
else if (rate == parent_rate * 20)
|
|
div = 0;
|
|
else
|
|
return -EINVAL;
|
|
|
|
val = readl_relaxed(pll->base);
|
|
val &= ~pll->div_mask;
|
|
val |= div;
|
|
writel_relaxed(val, pll->base);
|
|
|
|
return clk_pllv3_wait_lock(pll);
|
|
}
|
|
|
|
static const struct clk_ops clk_pllv3_ops = {
|
|
.prepare = clk_pllv3_prepare,
|
|
.unprepare = clk_pllv3_unprepare,
|
|
.recalc_rate = clk_pllv3_recalc_rate,
|
|
.round_rate = clk_pllv3_round_rate,
|
|
.set_rate = clk_pllv3_set_rate,
|
|
};
|
|
|
|
static unsigned long clk_pllv3_sys_recalc_rate(struct clk_hw *hw,
|
|
unsigned long parent_rate)
|
|
{
|
|
struct clk_pllv3 *pll = to_clk_pllv3(hw);
|
|
u32 div = readl_relaxed(pll->base) & pll->div_mask;
|
|
|
|
return parent_rate * div / 2;
|
|
}
|
|
|
|
static long clk_pllv3_sys_round_rate(struct clk_hw *hw, unsigned long rate,
|
|
unsigned long *prate)
|
|
{
|
|
unsigned long parent_rate = *prate;
|
|
unsigned long min_rate = parent_rate * 54 / 2;
|
|
unsigned long max_rate = parent_rate * 108 / 2;
|
|
u32 div;
|
|
|
|
if (rate > max_rate)
|
|
rate = max_rate;
|
|
else if (rate < min_rate)
|
|
rate = min_rate;
|
|
div = rate * 2 / parent_rate;
|
|
|
|
return parent_rate * div / 2;
|
|
}
|
|
|
|
static int clk_pllv3_sys_set_rate(struct clk_hw *hw, unsigned long rate,
|
|
unsigned long parent_rate)
|
|
{
|
|
struct clk_pllv3 *pll = to_clk_pllv3(hw);
|
|
unsigned long min_rate = parent_rate * 54 / 2;
|
|
unsigned long max_rate = parent_rate * 108 / 2;
|
|
u32 val, div;
|
|
|
|
if (rate < min_rate || rate > max_rate)
|
|
return -EINVAL;
|
|
|
|
div = rate * 2 / parent_rate;
|
|
val = readl_relaxed(pll->base);
|
|
val &= ~pll->div_mask;
|
|
val |= div;
|
|
writel_relaxed(val, pll->base);
|
|
|
|
return clk_pllv3_wait_lock(pll);
|
|
}
|
|
|
|
static const struct clk_ops clk_pllv3_sys_ops = {
|
|
.prepare = clk_pllv3_prepare,
|
|
.unprepare = clk_pllv3_unprepare,
|
|
.recalc_rate = clk_pllv3_sys_recalc_rate,
|
|
.round_rate = clk_pllv3_sys_round_rate,
|
|
.set_rate = clk_pllv3_sys_set_rate,
|
|
};
|
|
|
|
static unsigned long clk_pllv3_av_recalc_rate(struct clk_hw *hw,
|
|
unsigned long parent_rate)
|
|
{
|
|
struct clk_pllv3 *pll = to_clk_pllv3(hw);
|
|
u32 mfn = readl_relaxed(pll->base + PLL_NUM_OFFSET);
|
|
u32 mfd = readl_relaxed(pll->base + PLL_DENOM_OFFSET);
|
|
u32 div = readl_relaxed(pll->base) & pll->div_mask;
|
|
|
|
return (parent_rate * div) + ((parent_rate / mfd) * mfn);
|
|
}
|
|
|
|
static long clk_pllv3_av_round_rate(struct clk_hw *hw, unsigned long rate,
|
|
unsigned long *prate)
|
|
{
|
|
unsigned long parent_rate = *prate;
|
|
unsigned long min_rate = parent_rate * 27;
|
|
unsigned long max_rate = parent_rate * 54;
|
|
u32 div;
|
|
u32 mfn, mfd = 1000000;
|
|
s64 temp64;
|
|
|
|
if (rate > max_rate)
|
|
rate = max_rate;
|
|
else if (rate < min_rate)
|
|
rate = min_rate;
|
|
|
|
div = rate / parent_rate;
|
|
temp64 = (u64) (rate - div * parent_rate);
|
|
temp64 *= mfd;
|
|
do_div(temp64, parent_rate);
|
|
mfn = temp64;
|
|
|
|
return parent_rate * div + parent_rate / mfd * mfn;
|
|
}
|
|
|
|
static int clk_pllv3_av_set_rate(struct clk_hw *hw, unsigned long rate,
|
|
unsigned long parent_rate)
|
|
{
|
|
struct clk_pllv3 *pll = to_clk_pllv3(hw);
|
|
unsigned long min_rate = parent_rate * 27;
|
|
unsigned long max_rate = parent_rate * 54;
|
|
u32 val, div;
|
|
u32 mfn, mfd = 1000000;
|
|
s64 temp64;
|
|
|
|
if (rate < min_rate || rate > max_rate)
|
|
return -EINVAL;
|
|
|
|
div = rate / parent_rate;
|
|
temp64 = (u64) (rate - div * parent_rate);
|
|
temp64 *= mfd;
|
|
do_div(temp64, parent_rate);
|
|
mfn = temp64;
|
|
|
|
val = readl_relaxed(pll->base);
|
|
val &= ~pll->div_mask;
|
|
val |= div;
|
|
writel_relaxed(val, pll->base);
|
|
writel_relaxed(mfn, pll->base + PLL_NUM_OFFSET);
|
|
writel_relaxed(mfd, pll->base + PLL_DENOM_OFFSET);
|
|
|
|
return clk_pllv3_wait_lock(pll);
|
|
}
|
|
|
|
static const struct clk_ops clk_pllv3_av_ops = {
|
|
.prepare = clk_pllv3_prepare,
|
|
.unprepare = clk_pllv3_unprepare,
|
|
.recalc_rate = clk_pllv3_av_recalc_rate,
|
|
.round_rate = clk_pllv3_av_round_rate,
|
|
.set_rate = clk_pllv3_av_set_rate,
|
|
};
|
|
|
|
static unsigned long clk_pllv3_enet_recalc_rate(struct clk_hw *hw,
|
|
unsigned long parent_rate)
|
|
{
|
|
return 500000000;
|
|
}
|
|
|
|
static const struct clk_ops clk_pllv3_enet_ops = {
|
|
.prepare = clk_pllv3_prepare,
|
|
.unprepare = clk_pllv3_unprepare,
|
|
.recalc_rate = clk_pllv3_enet_recalc_rate,
|
|
};
|
|
|
|
struct clk *imx_clk_pllv3(enum imx_pllv3_type type, const char *name,
|
|
const char *parent_name, void __iomem *base,
|
|
u32 div_mask)
|
|
{
|
|
struct clk_pllv3 *pll;
|
|
const struct clk_ops *ops;
|
|
struct clk *clk;
|
|
struct clk_init_data init;
|
|
|
|
pll = kzalloc(sizeof(*pll), GFP_KERNEL);
|
|
if (!pll)
|
|
return ERR_PTR(-ENOMEM);
|
|
|
|
switch (type) {
|
|
case IMX_PLLV3_SYS:
|
|
ops = &clk_pllv3_sys_ops;
|
|
break;
|
|
case IMX_PLLV3_USB:
|
|
ops = &clk_pllv3_ops;
|
|
pll->powerup_set = true;
|
|
break;
|
|
case IMX_PLLV3_AV:
|
|
ops = &clk_pllv3_av_ops;
|
|
break;
|
|
case IMX_PLLV3_ENET:
|
|
ops = &clk_pllv3_enet_ops;
|
|
break;
|
|
default:
|
|
ops = &clk_pllv3_ops;
|
|
}
|
|
pll->base = base;
|
|
pll->div_mask = div_mask;
|
|
|
|
init.name = name;
|
|
init.ops = ops;
|
|
init.flags = 0;
|
|
init.parent_names = &parent_name;
|
|
init.num_parents = 1;
|
|
|
|
pll->hw.init = &init;
|
|
|
|
clk = clk_register(NULL, &pll->hw);
|
|
if (IS_ERR(clk))
|
|
kfree(pll);
|
|
|
|
return clk;
|
|
}
|