renegade-project/linux-next
2
0
Fork 0
mirror of https://github.com/edk2-porting/linux-next.git synced 2024-12-21 11:44:01 +08:00
Code
2b14449835
linux-next/arch/Kconfig
Srikar Dronamraju 2b14449835 uprobes, mm, x86: Add the ability to install and remove uprobes breakpoints 
Add uprobes support to the core kernel, with x86 support.

This commit adds the kernel facilities, the actual uprobes
user-space ABI and perf probe support comes in later commits.

General design:

Uprobes are maintained in an rb-tree indexed by inode and offset
(the offset here is from the start of the mapping). For a unique
(inode, offset) tuple, there can be at most one uprobe in the
rb-tree.

Since the (inode, offset) tuple identifies a unique uprobe, more
than one user may be interested in the same uprobe. This provides
the ability to connect multiple 'consumers' to the same uprobe.

Each consumer defines a handler and a filter (optional). The
'handler' is run every time the uprobe is hit, if it matches the
'filter' criteria.

The first consumer of a uprobe causes the breakpoint to be
inserted at the specified address and subsequent consumers are
appended to this list.  On subsequent probes, the consumer gets
appended to the existing list of consumers. The breakpoint is
removed when the last consumer unregisters. For all other
unregisterations, the consumer is removed from the list of
consumers.

Given a inode, we get a list of the mms that have mapped the
inode. Do the actual registration if mm maps the page where a
probe needs to be inserted/removed.

We use a temporary list to walk through the vmas that map the
inode.

- The number of maps that map the inode, is not known before we
  walk the rmap and keeps changing.
- extending vm_area_struct wasn't recommended, it's a
  size-critical data structure.
- There can be more than one maps of the inode in the same mm.

We add callbacks to the mmap methods to keep an eye on text vmas
that are of interest to uprobes.  When a vma of interest is mapped,
we insert the breakpoint at the right address.

Uprobe works by replacing the instruction at the address defined
by (inode, offset) with the arch specific breakpoint
instruction. We save a copy of the original instruction at the
uprobed address.

This is needed for:

 a. executing the instruction out-of-line (xol).
 b. instruction analysis for any subsequent fixups.
 c. restoring the instruction back when the uprobe is unregistered.

We insert or delete a breakpoint instruction, and this
breakpoint instruction is assumed to be the smallest instruction
available on the platform. For fixed size instruction platforms
this is trivially true, for variable size instruction platforms
the breakpoint instruction is typically the smallest (often a
single byte).

Writing the instruction is done by COWing the page and changing
the instruction during the copy, this even though most platforms
allow atomic writes of the breakpoint instruction. This also
mirrors the behaviour of a ptrace() memory write to a PRIVATE
file map.

The core worker is derived from KSM's replace_page() logic.

In essence, similar to KSM:

 a. allocate a new page and copy over contents of the page that
    has the uprobed vaddr
 b. modify the copy and insert the breakpoint at the required
    address
 c. switch the original page with the copy containing the
    breakpoint
 d. flush page tables.

replace_page() is being replicated here because of some minor
changes in the type of pages and also because Hugh Dickins had
plans to improve replace_page() for KSM specific work.

Instruction analysis on x86 is based on instruction decoder and
determines if an instruction can be probed and determines the
necessary fixups after singlestep.  Instruction analysis is done
at probe insertion time so that we avoid having to repeat the
same analysis every time a probe is hit.

A lot of code here is due to the improvement/suggestions/inputs
from Peter Zijlstra.

Changelog:

(v10):
 - Add code to clear REX.B prefix as suggested by Denys Vlasenko
   and Masami Hiramatsu.

(v9):
 - Use insn_offset_modrm as suggested by Masami Hiramatsu.

(v7):

 Handle comments from Peter Zijlstra:

 - Dont take reference to inode. (expect inode to uprobe_register to be sane).
 - Use PTR_ERR to set the return value.
 - No need to take reference to inode.
 - use PTR_ERR to return error value.
 - register and uprobe_unregister share code.

(v5):

 - Modified del_consumer as per comments from Peter.
 - Drop reference to inode before dropping reference to uprobe.
 - Use i_size_read(inode) instead of inode->i_size.
 - Ensure uprobe->consumers is NULL, before __uprobe_unregister() is called.
 - Includes errno.h as recommended by Stephen Rothwell to fix a build issue
   on sparc defconfig
 - Remove restrictions while unregistering.
 - Earlier code leaked inode references under some conditions while
   registering/unregistering.
 - Continue the vma-rmap walk even if the intermediate vma doesnt
   meet the requirements.
 - Validate the vma found by find_vma before inserting/removing the
   breakpoint
 - Call del_consumer under mutex_lock.
 - Use hash locks.
 - Handle mremap.
 - Introduce find_least_offset_node() instead of close match logic in
   find_uprobe
 - Uprobes no more depends on MM_OWNER; No reference to task_structs
   while inserting/removing a probe.
 - Uses read_mapping_page instead of grab_cache_page so that the pages
   have valid content.
 - pass NULL to get_user_pages for the task parameter.
 - call SetPageUptodate on the new page allocated in write_opcode.
 - fix leaking a reference to the new page under certain conditions.
 - Include Instruction Decoder if Uprobes gets defined.
 - Remove const attributes for instruction prefix arrays.
 - Uses mm_context to know if the application is 32 bit.

Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Also-written-by: Jim Keniston <jkenisto@us.ibm.com>
Reviewed-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Roland McGrath <roland@hack.frob.com>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Arnaldo Carvalho de Melo <acme@infradead.org>
Cc: Anton Arapov <anton@redhat.com>
Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Denys Vlasenko <vda.linux@googlemail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Linux-mm <linux-mm@kvack.org>
Link: http://lkml.kernel.org/r/20120209092642.GE16600@linux.vnet.ibm.com
[ Made various small edits to the commit log ]
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2012-02-17 10:00:01 +01:00

214 lines
5.6 KiB
Plaintext
Raw Blame History

#
# General architecture dependent options
#
config OPROFILE
tristate "OProfile system profiling"
depends on PROFILING
depends on HAVE_OPROFILE
select RING_BUFFER
select RING_BUFFER_ALLOW_SWAP
help
OProfile is a profiling system capable of profiling the
whole system, include the kernel, kernel modules, libraries,
and applications.
If unsure, say N.
config OPROFILE_EVENT_MULTIPLEX
bool "OProfile multiplexing support (EXPERIMENTAL)"
default n
depends on OPROFILE && X86
help
The number of hardware counters is limited. The multiplexing
feature enables OProfile to gather more events than counters
are provided by the hardware. This is realized by switching
between events at an user specified time interval.
If unsure, say N.
config HAVE_OPROFILE
bool
config OPROFILE_NMI_TIMER
def_bool y
depends on PERF_EVENTS && HAVE_PERF_EVENTS_NMI
config KPROBES
bool "Kprobes"
depends on MODULES
depends on HAVE_KPROBES
select KALLSYMS
help
Kprobes allows you to trap at almost any kernel address and
execute a callback function. register_kprobe() establishes
a probepoint and specifies the callback. Kprobes is useful
for kernel debugging, non-intrusive instrumentation and testing.
If in doubt, say "N".
config JUMP_LABEL
bool "Optimize trace point call sites"
depends on HAVE_ARCH_JUMP_LABEL
help
If it is detected that the compiler has support for "asm goto",
the kernel will compile trace point locations with just a
nop instruction. When trace points are enabled, the nop will
be converted to a jump to the trace function. This technique
lowers overhead and stress on the branch prediction of the
processor.
On i386, options added to the compiler flags may increase
the size of the kernel slightly.
config OPTPROBES
def_bool y
depends on KPROBES && HAVE_OPTPROBES
depends on !PREEMPT
config UPROBES
bool "User-space probes (EXPERIMENTAL)"
depends on ARCH_SUPPORTS_UPROBES
default n
help
Uprobes enables kernel subsystems to establish probepoints
in user applications and execute handler functions when
the probepoints are hit.
If in doubt, say "N".
config HAVE_EFFICIENT_UNALIGNED_ACCESS
bool
help
Some architectures are unable to perform unaligned accesses
without the use of get_unaligned/put_unaligned. Others are
unable to perform such accesses efficiently (e.g. trap on
unaligned access and require fixing it up in the exception
handler.)
This symbol should be selected by an architecture if it can
perform unaligned accesses efficiently to allow different
code paths to be selected for these cases. Some network
drivers, for example, could opt to not fix up alignment
problems with received packets if doing so would not help
much.
See Documentation/unaligned-memory-access.txt for more
information on the topic of unaligned memory accesses.
config HAVE_SYSCALL_WRAPPERS
bool
config KRETPROBES
def_bool y
depends on KPROBES && HAVE_KRETPROBES
config USER_RETURN_NOTIFIER
bool
depends on HAVE_USER_RETURN_NOTIFIER
help
Provide a kernel-internal notification when a cpu is about to
switch to user mode.
config HAVE_IOREMAP_PROT
bool
config HAVE_KPROBES
bool
config HAVE_KRETPROBES
bool
config HAVE_OPTPROBES
bool
#
# An arch should select this if it provides all these things:
#
# task_pt_regs() in asm/processor.h or asm/ptrace.h
# arch_has_single_step() if there is hardware single-step support
# arch_has_block_step() if there is hardware block-step support
# asm/syscall.h supplying asm-generic/syscall.h interface
# linux/regset.h user_regset interfaces
# CORE_DUMP_USE_REGSET #define'd in linux/elf.h
# TIF_SYSCALL_TRACE calls tracehook_report_syscall_{entry,exit}
# TIF_NOTIFY_RESUME calls tracehook_notify_resume()
# signal delivery calls tracehook_signal_handler()
#
config HAVE_ARCH_TRACEHOOK
bool
config HAVE_DMA_ATTRS
bool
config USE_GENERIC_SMP_HELPERS
bool
config HAVE_REGS_AND_STACK_ACCESS_API
bool
help
This symbol should be selected by an architecure if it supports
the API needed to access registers and stack entries from pt_regs,
declared in asm/ptrace.h
For example the kprobes-based event tracer needs this API.
config HAVE_CLK
bool
help
The <linux/clk.h> calls support software clock gating and
thus are a key power management tool on many systems.
config HAVE_DMA_API_DEBUG
bool
config HAVE_HW_BREAKPOINT
bool
depends on PERF_EVENTS
config HAVE_MIXED_BREAKPOINTS_REGS
bool
depends on HAVE_HW_BREAKPOINT
help
Depending on the arch implementation of hardware breakpoints,
some of them have separate registers for data and instruction
breakpoints addresses, others have mixed registers to store
them but define the access type in a control register.
Select this option if your arch implements breakpoints under the
latter fashion.
config HAVE_USER_RETURN_NOTIFIER
bool
config HAVE_PERF_EVENTS_NMI
bool
help
System hardware can generate an NMI using the perf event
subsystem. Also has support for calculating CPU cycle events
to determine how many clock cycles in a given period.
config HAVE_ARCH_JUMP_LABEL
bool
config HAVE_ARCH_MUTEX_CPU_RELAX
bool
config HAVE_RCU_TABLE_FREE
bool
config ARCH_HAVE_NMI_SAFE_CMPXCHG
bool
config HAVE_ALIGNED_STRUCT_PAGE
bool
help
This makes sure that struct pages are double word aligned and that
e.g. the SLUB allocator can perform double word atomic operations
on a struct page for better performance. However selecting this
might increase the size of a struct page by a word.
config HAVE_CMPXCHG_LOCAL
bool
config HAVE_CMPXCHG_DOUBLE
bool
source "kernel/gcov/Kconfig"
View Git Blame Copy Permalink