mirror of
https://github.com/edk2-porting/linux-next.git
synced 2024-12-29 15:43:59 +08:00
477ca3ad6a
The user must read N bytes of SPIRF (1 <= N <= 4) that do not exceed the amount of data in the receive FIFO, so read the SPIRF byte by byte when the data in receive FIFO is less than 4 bytes. On Simics, when read N bytes that exceed the amout of data in receive FIFO, we can't read the data out, that is we can't clear the rx FIFO, then the CPU will loop on the espi rx interrupt. Signed-off-by: Mingkai Hu <Mingkai.hu@freescale.com> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
764 lines
18 KiB
C
764 lines
18 KiB
C
/*
|
|
* Freescale eSPI controller driver.
|
|
*
|
|
* Copyright 2010 Freescale Semiconductor, Inc.
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify it
|
|
* under the terms of the GNU General Public License as published by the
|
|
* Free Software Foundation; either version 2 of the License, or (at your
|
|
* option) any later version.
|
|
*/
|
|
#include <linux/module.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/irq.h>
|
|
#include <linux/spi/spi.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/fsl_devices.h>
|
|
#include <linux/mm.h>
|
|
#include <linux/of.h>
|
|
#include <linux/of_platform.h>
|
|
#include <linux/of_spi.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/err.h>
|
|
#include <sysdev/fsl_soc.h>
|
|
|
|
#include "spi_fsl_lib.h"
|
|
|
|
/* eSPI Controller registers */
|
|
struct fsl_espi_reg {
|
|
__be32 mode; /* 0x000 - eSPI mode register */
|
|
__be32 event; /* 0x004 - eSPI event register */
|
|
__be32 mask; /* 0x008 - eSPI mask register */
|
|
__be32 command; /* 0x00c - eSPI command register */
|
|
__be32 transmit; /* 0x010 - eSPI transmit FIFO access register*/
|
|
__be32 receive; /* 0x014 - eSPI receive FIFO access register*/
|
|
u8 res[8]; /* 0x018 - 0x01c reserved */
|
|
__be32 csmode[4]; /* 0x020 - 0x02c eSPI cs mode register */
|
|
};
|
|
|
|
struct fsl_espi_transfer {
|
|
const void *tx_buf;
|
|
void *rx_buf;
|
|
unsigned len;
|
|
unsigned n_tx;
|
|
unsigned n_rx;
|
|
unsigned actual_length;
|
|
int status;
|
|
};
|
|
|
|
/* eSPI Controller mode register definitions */
|
|
#define SPMODE_ENABLE (1 << 31)
|
|
#define SPMODE_LOOP (1 << 30)
|
|
#define SPMODE_TXTHR(x) ((x) << 8)
|
|
#define SPMODE_RXTHR(x) ((x) << 0)
|
|
|
|
/* eSPI Controller CS mode register definitions */
|
|
#define CSMODE_CI_INACTIVEHIGH (1 << 31)
|
|
#define CSMODE_CP_BEGIN_EDGECLK (1 << 30)
|
|
#define CSMODE_REV (1 << 29)
|
|
#define CSMODE_DIV16 (1 << 28)
|
|
#define CSMODE_PM(x) ((x) << 24)
|
|
#define CSMODE_POL_1 (1 << 20)
|
|
#define CSMODE_LEN(x) ((x) << 16)
|
|
#define CSMODE_BEF(x) ((x) << 12)
|
|
#define CSMODE_AFT(x) ((x) << 8)
|
|
#define CSMODE_CG(x) ((x) << 3)
|
|
|
|
/* Default mode/csmode for eSPI controller */
|
|
#define SPMODE_INIT_VAL (SPMODE_TXTHR(4) | SPMODE_RXTHR(3))
|
|
#define CSMODE_INIT_VAL (CSMODE_POL_1 | CSMODE_BEF(0) \
|
|
| CSMODE_AFT(0) | CSMODE_CG(1))
|
|
|
|
/* SPIE register values */
|
|
#define SPIE_NE 0x00000200 /* Not empty */
|
|
#define SPIE_NF 0x00000100 /* Not full */
|
|
|
|
/* SPIM register values */
|
|
#define SPIM_NE 0x00000200 /* Not empty */
|
|
#define SPIM_NF 0x00000100 /* Not full */
|
|
#define SPIE_RXCNT(reg) ((reg >> 24) & 0x3F)
|
|
#define SPIE_TXCNT(reg) ((reg >> 16) & 0x3F)
|
|
|
|
/* SPCOM register values */
|
|
#define SPCOM_CS(x) ((x) << 30)
|
|
#define SPCOM_TRANLEN(x) ((x) << 0)
|
|
#define SPCOM_TRANLEN_MAX 0xFFFF /* Max transaction length */
|
|
|
|
static void fsl_espi_change_mode(struct spi_device *spi)
|
|
{
|
|
struct mpc8xxx_spi *mspi = spi_master_get_devdata(spi->master);
|
|
struct spi_mpc8xxx_cs *cs = spi->controller_state;
|
|
struct fsl_espi_reg *reg_base = mspi->reg_base;
|
|
__be32 __iomem *mode = ®_base->csmode[spi->chip_select];
|
|
__be32 __iomem *espi_mode = ®_base->mode;
|
|
u32 tmp;
|
|
unsigned long flags;
|
|
|
|
/* Turn off IRQs locally to minimize time that SPI is disabled. */
|
|
local_irq_save(flags);
|
|
|
|
/* Turn off SPI unit prior changing mode */
|
|
tmp = mpc8xxx_spi_read_reg(espi_mode);
|
|
mpc8xxx_spi_write_reg(espi_mode, tmp & ~SPMODE_ENABLE);
|
|
mpc8xxx_spi_write_reg(mode, cs->hw_mode);
|
|
mpc8xxx_spi_write_reg(espi_mode, tmp);
|
|
|
|
local_irq_restore(flags);
|
|
}
|
|
|
|
static u32 fsl_espi_tx_buf_lsb(struct mpc8xxx_spi *mpc8xxx_spi)
|
|
{
|
|
u32 data;
|
|
u16 data_h;
|
|
u16 data_l;
|
|
const u32 *tx = mpc8xxx_spi->tx;
|
|
|
|
if (!tx)
|
|
return 0;
|
|
|
|
data = *tx++ << mpc8xxx_spi->tx_shift;
|
|
data_l = data & 0xffff;
|
|
data_h = (data >> 16) & 0xffff;
|
|
swab16s(&data_l);
|
|
swab16s(&data_h);
|
|
data = data_h | data_l;
|
|
|
|
mpc8xxx_spi->tx = tx;
|
|
return data;
|
|
}
|
|
|
|
static int fsl_espi_setup_transfer(struct spi_device *spi,
|
|
struct spi_transfer *t)
|
|
{
|
|
struct mpc8xxx_spi *mpc8xxx_spi = spi_master_get_devdata(spi->master);
|
|
int bits_per_word = 0;
|
|
u8 pm;
|
|
u32 hz = 0;
|
|
struct spi_mpc8xxx_cs *cs = spi->controller_state;
|
|
|
|
if (t) {
|
|
bits_per_word = t->bits_per_word;
|
|
hz = t->speed_hz;
|
|
}
|
|
|
|
/* spi_transfer level calls that work per-word */
|
|
if (!bits_per_word)
|
|
bits_per_word = spi->bits_per_word;
|
|
|
|
/* Make sure its a bit width we support [4..16] */
|
|
if ((bits_per_word < 4) || (bits_per_word > 16))
|
|
return -EINVAL;
|
|
|
|
if (!hz)
|
|
hz = spi->max_speed_hz;
|
|
|
|
cs->rx_shift = 0;
|
|
cs->tx_shift = 0;
|
|
cs->get_rx = mpc8xxx_spi_rx_buf_u32;
|
|
cs->get_tx = mpc8xxx_spi_tx_buf_u32;
|
|
if (bits_per_word <= 8) {
|
|
cs->rx_shift = 8 - bits_per_word;
|
|
} else if (bits_per_word <= 16) {
|
|
cs->rx_shift = 16 - bits_per_word;
|
|
if (spi->mode & SPI_LSB_FIRST)
|
|
cs->get_tx = fsl_espi_tx_buf_lsb;
|
|
} else {
|
|
return -EINVAL;
|
|
}
|
|
|
|
mpc8xxx_spi->rx_shift = cs->rx_shift;
|
|
mpc8xxx_spi->tx_shift = cs->tx_shift;
|
|
mpc8xxx_spi->get_rx = cs->get_rx;
|
|
mpc8xxx_spi->get_tx = cs->get_tx;
|
|
|
|
bits_per_word = bits_per_word - 1;
|
|
|
|
/* mask out bits we are going to set */
|
|
cs->hw_mode &= ~(CSMODE_LEN(0xF) | CSMODE_DIV16 | CSMODE_PM(0xF));
|
|
|
|
cs->hw_mode |= CSMODE_LEN(bits_per_word);
|
|
|
|
if ((mpc8xxx_spi->spibrg / hz) > 64) {
|
|
cs->hw_mode |= CSMODE_DIV16;
|
|
pm = (mpc8xxx_spi->spibrg - 1) / (hz * 64) + 1;
|
|
|
|
WARN_ONCE(pm > 16, "%s: Requested speed is too low: %d Hz. "
|
|
"Will use %d Hz instead.\n", dev_name(&spi->dev),
|
|
hz, mpc8xxx_spi->spibrg / 1024);
|
|
if (pm > 16)
|
|
pm = 16;
|
|
} else {
|
|
pm = (mpc8xxx_spi->spibrg - 1) / (hz * 4) + 1;
|
|
}
|
|
if (pm)
|
|
pm--;
|
|
|
|
cs->hw_mode |= CSMODE_PM(pm);
|
|
|
|
fsl_espi_change_mode(spi);
|
|
return 0;
|
|
}
|
|
|
|
static int fsl_espi_cpu_bufs(struct mpc8xxx_spi *mspi, struct spi_transfer *t,
|
|
unsigned int len)
|
|
{
|
|
u32 word;
|
|
struct fsl_espi_reg *reg_base = mspi->reg_base;
|
|
|
|
mspi->count = len;
|
|
|
|
/* enable rx ints */
|
|
mpc8xxx_spi_write_reg(®_base->mask, SPIM_NE);
|
|
|
|
/* transmit word */
|
|
word = mspi->get_tx(mspi);
|
|
mpc8xxx_spi_write_reg(®_base->transmit, word);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int fsl_espi_bufs(struct spi_device *spi, struct spi_transfer *t)
|
|
{
|
|
struct mpc8xxx_spi *mpc8xxx_spi = spi_master_get_devdata(spi->master);
|
|
struct fsl_espi_reg *reg_base = mpc8xxx_spi->reg_base;
|
|
unsigned int len = t->len;
|
|
u8 bits_per_word;
|
|
int ret;
|
|
|
|
bits_per_word = spi->bits_per_word;
|
|
if (t->bits_per_word)
|
|
bits_per_word = t->bits_per_word;
|
|
|
|
mpc8xxx_spi->len = t->len;
|
|
len = roundup(len, 4) / 4;
|
|
|
|
mpc8xxx_spi->tx = t->tx_buf;
|
|
mpc8xxx_spi->rx = t->rx_buf;
|
|
|
|
INIT_COMPLETION(mpc8xxx_spi->done);
|
|
|
|
/* Set SPCOM[CS] and SPCOM[TRANLEN] field */
|
|
if ((t->len - 1) > SPCOM_TRANLEN_MAX) {
|
|
dev_err(mpc8xxx_spi->dev, "Transaction length (%d)"
|
|
" beyond the SPCOM[TRANLEN] field\n", t->len);
|
|
return -EINVAL;
|
|
}
|
|
mpc8xxx_spi_write_reg(®_base->command,
|
|
(SPCOM_CS(spi->chip_select) | SPCOM_TRANLEN(t->len - 1)));
|
|
|
|
ret = fsl_espi_cpu_bufs(mpc8xxx_spi, t, len);
|
|
if (ret)
|
|
return ret;
|
|
|
|
wait_for_completion(&mpc8xxx_spi->done);
|
|
|
|
/* disable rx ints */
|
|
mpc8xxx_spi_write_reg(®_base->mask, 0);
|
|
|
|
return mpc8xxx_spi->count;
|
|
}
|
|
|
|
static inline void fsl_espi_addr2cmd(unsigned int addr, u8 *cmd)
|
|
{
|
|
if (cmd) {
|
|
cmd[1] = (u8)(addr >> 16);
|
|
cmd[2] = (u8)(addr >> 8);
|
|
cmd[3] = (u8)(addr >> 0);
|
|
}
|
|
}
|
|
|
|
static inline unsigned int fsl_espi_cmd2addr(u8 *cmd)
|
|
{
|
|
if (cmd)
|
|
return cmd[1] << 16 | cmd[2] << 8 | cmd[3] << 0;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void fsl_espi_do_trans(struct spi_message *m,
|
|
struct fsl_espi_transfer *tr)
|
|
{
|
|
struct spi_device *spi = m->spi;
|
|
struct mpc8xxx_spi *mspi = spi_master_get_devdata(spi->master);
|
|
struct fsl_espi_transfer *espi_trans = tr;
|
|
struct spi_message message;
|
|
struct spi_transfer *t, *first, trans;
|
|
int status = 0;
|
|
|
|
spi_message_init(&message);
|
|
memset(&trans, 0, sizeof(trans));
|
|
|
|
first = list_first_entry(&m->transfers, struct spi_transfer,
|
|
transfer_list);
|
|
list_for_each_entry(t, &m->transfers, transfer_list) {
|
|
if ((first->bits_per_word != t->bits_per_word) ||
|
|
(first->speed_hz != t->speed_hz)) {
|
|
espi_trans->status = -EINVAL;
|
|
dev_err(mspi->dev, "bits_per_word/speed_hz should be"
|
|
" same for the same SPI transfer\n");
|
|
return;
|
|
}
|
|
|
|
trans.speed_hz = t->speed_hz;
|
|
trans.bits_per_word = t->bits_per_word;
|
|
trans.delay_usecs = max(first->delay_usecs, t->delay_usecs);
|
|
}
|
|
|
|
trans.len = espi_trans->len;
|
|
trans.tx_buf = espi_trans->tx_buf;
|
|
trans.rx_buf = espi_trans->rx_buf;
|
|
spi_message_add_tail(&trans, &message);
|
|
|
|
list_for_each_entry(t, &message.transfers, transfer_list) {
|
|
if (t->bits_per_word || t->speed_hz) {
|
|
status = -EINVAL;
|
|
|
|
status = fsl_espi_setup_transfer(spi, t);
|
|
if (status < 0)
|
|
break;
|
|
}
|
|
|
|
if (t->len)
|
|
status = fsl_espi_bufs(spi, t);
|
|
|
|
if (status) {
|
|
status = -EMSGSIZE;
|
|
break;
|
|
}
|
|
|
|
if (t->delay_usecs)
|
|
udelay(t->delay_usecs);
|
|
}
|
|
|
|
espi_trans->status = status;
|
|
fsl_espi_setup_transfer(spi, NULL);
|
|
}
|
|
|
|
static void fsl_espi_cmd_trans(struct spi_message *m,
|
|
struct fsl_espi_transfer *trans, u8 *rx_buff)
|
|
{
|
|
struct spi_transfer *t;
|
|
u8 *local_buf;
|
|
int i = 0;
|
|
struct fsl_espi_transfer *espi_trans = trans;
|
|
|
|
local_buf = kzalloc(SPCOM_TRANLEN_MAX, GFP_KERNEL);
|
|
if (!local_buf) {
|
|
espi_trans->status = -ENOMEM;
|
|
return;
|
|
}
|
|
|
|
list_for_each_entry(t, &m->transfers, transfer_list) {
|
|
if (t->tx_buf) {
|
|
memcpy(local_buf + i, t->tx_buf, t->len);
|
|
i += t->len;
|
|
}
|
|
}
|
|
|
|
espi_trans->tx_buf = local_buf;
|
|
espi_trans->rx_buf = local_buf + espi_trans->n_tx;
|
|
fsl_espi_do_trans(m, espi_trans);
|
|
|
|
espi_trans->actual_length = espi_trans->len;
|
|
kfree(local_buf);
|
|
}
|
|
|
|
static void fsl_espi_rw_trans(struct spi_message *m,
|
|
struct fsl_espi_transfer *trans, u8 *rx_buff)
|
|
{
|
|
struct fsl_espi_transfer *espi_trans = trans;
|
|
unsigned int n_tx = espi_trans->n_tx;
|
|
unsigned int n_rx = espi_trans->n_rx;
|
|
struct spi_transfer *t;
|
|
u8 *local_buf;
|
|
u8 *rx_buf = rx_buff;
|
|
unsigned int trans_len;
|
|
unsigned int addr;
|
|
int i, pos, loop;
|
|
|
|
local_buf = kzalloc(SPCOM_TRANLEN_MAX, GFP_KERNEL);
|
|
if (!local_buf) {
|
|
espi_trans->status = -ENOMEM;
|
|
return;
|
|
}
|
|
|
|
for (pos = 0, loop = 0; pos < n_rx; pos += trans_len, loop++) {
|
|
trans_len = n_rx - pos;
|
|
if (trans_len > SPCOM_TRANLEN_MAX - n_tx)
|
|
trans_len = SPCOM_TRANLEN_MAX - n_tx;
|
|
|
|
i = 0;
|
|
list_for_each_entry(t, &m->transfers, transfer_list) {
|
|
if (t->tx_buf) {
|
|
memcpy(local_buf + i, t->tx_buf, t->len);
|
|
i += t->len;
|
|
}
|
|
}
|
|
|
|
if (pos > 0) {
|
|
addr = fsl_espi_cmd2addr(local_buf);
|
|
addr += pos;
|
|
fsl_espi_addr2cmd(addr, local_buf);
|
|
}
|
|
|
|
espi_trans->n_tx = n_tx;
|
|
espi_trans->n_rx = trans_len;
|
|
espi_trans->len = trans_len + n_tx;
|
|
espi_trans->tx_buf = local_buf;
|
|
espi_trans->rx_buf = local_buf + n_tx;
|
|
fsl_espi_do_trans(m, espi_trans);
|
|
|
|
memcpy(rx_buf + pos, espi_trans->rx_buf + n_tx, trans_len);
|
|
|
|
if (loop > 0)
|
|
espi_trans->actual_length += espi_trans->len - n_tx;
|
|
else
|
|
espi_trans->actual_length += espi_trans->len;
|
|
}
|
|
|
|
kfree(local_buf);
|
|
}
|
|
|
|
static void fsl_espi_do_one_msg(struct spi_message *m)
|
|
{
|
|
struct spi_transfer *t;
|
|
u8 *rx_buf = NULL;
|
|
unsigned int n_tx = 0;
|
|
unsigned int n_rx = 0;
|
|
struct fsl_espi_transfer espi_trans;
|
|
|
|
list_for_each_entry(t, &m->transfers, transfer_list) {
|
|
if (t->tx_buf)
|
|
n_tx += t->len;
|
|
if (t->rx_buf) {
|
|
n_rx += t->len;
|
|
rx_buf = t->rx_buf;
|
|
}
|
|
}
|
|
|
|
espi_trans.n_tx = n_tx;
|
|
espi_trans.n_rx = n_rx;
|
|
espi_trans.len = n_tx + n_rx;
|
|
espi_trans.actual_length = 0;
|
|
espi_trans.status = 0;
|
|
|
|
if (!rx_buf)
|
|
fsl_espi_cmd_trans(m, &espi_trans, NULL);
|
|
else
|
|
fsl_espi_rw_trans(m, &espi_trans, rx_buf);
|
|
|
|
m->actual_length = espi_trans.actual_length;
|
|
m->status = espi_trans.status;
|
|
m->complete(m->context);
|
|
}
|
|
|
|
static int fsl_espi_setup(struct spi_device *spi)
|
|
{
|
|
struct mpc8xxx_spi *mpc8xxx_spi;
|
|
struct fsl_espi_reg *reg_base;
|
|
int retval;
|
|
u32 hw_mode;
|
|
u32 loop_mode;
|
|
struct spi_mpc8xxx_cs *cs = spi->controller_state;
|
|
|
|
if (!spi->max_speed_hz)
|
|
return -EINVAL;
|
|
|
|
if (!cs) {
|
|
cs = kzalloc(sizeof *cs, GFP_KERNEL);
|
|
if (!cs)
|
|
return -ENOMEM;
|
|
spi->controller_state = cs;
|
|
}
|
|
|
|
mpc8xxx_spi = spi_master_get_devdata(spi->master);
|
|
reg_base = mpc8xxx_spi->reg_base;
|
|
|
|
hw_mode = cs->hw_mode; /* Save orginal settings */
|
|
cs->hw_mode = mpc8xxx_spi_read_reg(
|
|
®_base->csmode[spi->chip_select]);
|
|
/* mask out bits we are going to set */
|
|
cs->hw_mode &= ~(CSMODE_CP_BEGIN_EDGECLK | CSMODE_CI_INACTIVEHIGH
|
|
| CSMODE_REV);
|
|
|
|
if (spi->mode & SPI_CPHA)
|
|
cs->hw_mode |= CSMODE_CP_BEGIN_EDGECLK;
|
|
if (spi->mode & SPI_CPOL)
|
|
cs->hw_mode |= CSMODE_CI_INACTIVEHIGH;
|
|
if (!(spi->mode & SPI_LSB_FIRST))
|
|
cs->hw_mode |= CSMODE_REV;
|
|
|
|
/* Handle the loop mode */
|
|
loop_mode = mpc8xxx_spi_read_reg(®_base->mode);
|
|
loop_mode &= ~SPMODE_LOOP;
|
|
if (spi->mode & SPI_LOOP)
|
|
loop_mode |= SPMODE_LOOP;
|
|
mpc8xxx_spi_write_reg(®_base->mode, loop_mode);
|
|
|
|
retval = fsl_espi_setup_transfer(spi, NULL);
|
|
if (retval < 0) {
|
|
cs->hw_mode = hw_mode; /* Restore settings */
|
|
return retval;
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
void fsl_espi_cpu_irq(struct mpc8xxx_spi *mspi, u32 events)
|
|
{
|
|
struct fsl_espi_reg *reg_base = mspi->reg_base;
|
|
|
|
/* We need handle RX first */
|
|
if (events & SPIE_NE) {
|
|
u32 rx_data, tmp;
|
|
u8 rx_data_8;
|
|
|
|
/* Spin until RX is done */
|
|
while (SPIE_RXCNT(events) < min(4, mspi->len)) {
|
|
cpu_relax();
|
|
events = mpc8xxx_spi_read_reg(®_base->event);
|
|
}
|
|
|
|
if (mspi->len >= 4) {
|
|
rx_data = mpc8xxx_spi_read_reg(®_base->receive);
|
|
} else {
|
|
tmp = mspi->len;
|
|
rx_data = 0;
|
|
while (tmp--) {
|
|
rx_data_8 = in_8((u8 *)®_base->receive);
|
|
rx_data |= (rx_data_8 << (tmp * 8));
|
|
}
|
|
|
|
rx_data <<= (4 - mspi->len) * 8;
|
|
}
|
|
|
|
mspi->len -= 4;
|
|
|
|
if (mspi->rx)
|
|
mspi->get_rx(rx_data, mspi);
|
|
}
|
|
|
|
if (!(events & SPIE_NF)) {
|
|
int ret;
|
|
|
|
/* spin until TX is done */
|
|
ret = spin_event_timeout(((events = mpc8xxx_spi_read_reg(
|
|
®_base->event)) & SPIE_NF) == 0, 1000, 0);
|
|
if (!ret) {
|
|
dev_err(mspi->dev, "tired waiting for SPIE_NF\n");
|
|
return;
|
|
}
|
|
}
|
|
|
|
/* Clear the events */
|
|
mpc8xxx_spi_write_reg(®_base->event, events);
|
|
|
|
mspi->count -= 1;
|
|
if (mspi->count) {
|
|
u32 word = mspi->get_tx(mspi);
|
|
|
|
mpc8xxx_spi_write_reg(®_base->transmit, word);
|
|
} else {
|
|
complete(&mspi->done);
|
|
}
|
|
}
|
|
|
|
static irqreturn_t fsl_espi_irq(s32 irq, void *context_data)
|
|
{
|
|
struct mpc8xxx_spi *mspi = context_data;
|
|
struct fsl_espi_reg *reg_base = mspi->reg_base;
|
|
irqreturn_t ret = IRQ_NONE;
|
|
u32 events;
|
|
|
|
/* Get interrupt events(tx/rx) */
|
|
events = mpc8xxx_spi_read_reg(®_base->event);
|
|
if (events)
|
|
ret = IRQ_HANDLED;
|
|
|
|
dev_vdbg(mspi->dev, "%s: events %x\n", __func__, events);
|
|
|
|
fsl_espi_cpu_irq(mspi, events);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static void fsl_espi_remove(struct mpc8xxx_spi *mspi)
|
|
{
|
|
iounmap(mspi->reg_base);
|
|
}
|
|
|
|
static struct spi_master * __devinit fsl_espi_probe(struct device *dev,
|
|
struct resource *mem, unsigned int irq)
|
|
{
|
|
struct fsl_spi_platform_data *pdata = dev->platform_data;
|
|
struct spi_master *master;
|
|
struct mpc8xxx_spi *mpc8xxx_spi;
|
|
struct fsl_espi_reg *reg_base;
|
|
u32 regval;
|
|
int i, ret = 0;
|
|
|
|
master = spi_alloc_master(dev, sizeof(struct mpc8xxx_spi));
|
|
if (!master) {
|
|
ret = -ENOMEM;
|
|
goto err;
|
|
}
|
|
|
|
dev_set_drvdata(dev, master);
|
|
|
|
ret = mpc8xxx_spi_probe(dev, mem, irq);
|
|
if (ret)
|
|
goto err_probe;
|
|
|
|
master->setup = fsl_espi_setup;
|
|
|
|
mpc8xxx_spi = spi_master_get_devdata(master);
|
|
mpc8xxx_spi->spi_do_one_msg = fsl_espi_do_one_msg;
|
|
mpc8xxx_spi->spi_remove = fsl_espi_remove;
|
|
|
|
mpc8xxx_spi->reg_base = ioremap(mem->start, resource_size(mem));
|
|
if (!mpc8xxx_spi->reg_base) {
|
|
ret = -ENOMEM;
|
|
goto err_probe;
|
|
}
|
|
|
|
reg_base = mpc8xxx_spi->reg_base;
|
|
|
|
/* Register for SPI Interrupt */
|
|
ret = request_irq(mpc8xxx_spi->irq, fsl_espi_irq,
|
|
0, "fsl_espi", mpc8xxx_spi);
|
|
if (ret)
|
|
goto free_irq;
|
|
|
|
if (mpc8xxx_spi->flags & SPI_QE_CPU_MODE) {
|
|
mpc8xxx_spi->rx_shift = 16;
|
|
mpc8xxx_spi->tx_shift = 24;
|
|
}
|
|
|
|
/* SPI controller initializations */
|
|
mpc8xxx_spi_write_reg(®_base->mode, 0);
|
|
mpc8xxx_spi_write_reg(®_base->mask, 0);
|
|
mpc8xxx_spi_write_reg(®_base->command, 0);
|
|
mpc8xxx_spi_write_reg(®_base->event, 0xffffffff);
|
|
|
|
/* Init eSPI CS mode register */
|
|
for (i = 0; i < pdata->max_chipselect; i++)
|
|
mpc8xxx_spi_write_reg(®_base->csmode[i], CSMODE_INIT_VAL);
|
|
|
|
/* Enable SPI interface */
|
|
regval = pdata->initial_spmode | SPMODE_INIT_VAL | SPMODE_ENABLE;
|
|
|
|
mpc8xxx_spi_write_reg(®_base->mode, regval);
|
|
|
|
ret = spi_register_master(master);
|
|
if (ret < 0)
|
|
goto unreg_master;
|
|
|
|
dev_info(dev, "at 0x%p (irq = %d)\n", reg_base, mpc8xxx_spi->irq);
|
|
|
|
return master;
|
|
|
|
unreg_master:
|
|
free_irq(mpc8xxx_spi->irq, mpc8xxx_spi);
|
|
free_irq:
|
|
iounmap(mpc8xxx_spi->reg_base);
|
|
err_probe:
|
|
spi_master_put(master);
|
|
err:
|
|
return ERR_PTR(ret);
|
|
}
|
|
|
|
static int of_fsl_espi_get_chipselects(struct device *dev)
|
|
{
|
|
struct device_node *np = dev->of_node;
|
|
struct fsl_spi_platform_data *pdata = dev->platform_data;
|
|
const u32 *prop;
|
|
int len;
|
|
|
|
prop = of_get_property(np, "fsl,espi-num-chipselects", &len);
|
|
if (!prop || len < sizeof(*prop)) {
|
|
dev_err(dev, "No 'fsl,espi-num-chipselects' property\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
pdata->max_chipselect = *prop;
|
|
pdata->cs_control = NULL;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int __devinit of_fsl_espi_probe(struct platform_device *ofdev,
|
|
const struct of_device_id *ofid)
|
|
{
|
|
struct device *dev = &ofdev->dev;
|
|
struct device_node *np = ofdev->dev.of_node;
|
|
struct spi_master *master;
|
|
struct resource mem;
|
|
struct resource irq;
|
|
int ret = -ENOMEM;
|
|
|
|
ret = of_mpc8xxx_spi_probe(ofdev, ofid);
|
|
if (ret)
|
|
return ret;
|
|
|
|
ret = of_fsl_espi_get_chipselects(dev);
|
|
if (ret)
|
|
goto err;
|
|
|
|
ret = of_address_to_resource(np, 0, &mem);
|
|
if (ret)
|
|
goto err;
|
|
|
|
ret = of_irq_to_resource(np, 0, &irq);
|
|
if (!ret) {
|
|
ret = -EINVAL;
|
|
goto err;
|
|
}
|
|
|
|
master = fsl_espi_probe(dev, &mem, irq.start);
|
|
if (IS_ERR(master)) {
|
|
ret = PTR_ERR(master);
|
|
goto err;
|
|
}
|
|
|
|
return 0;
|
|
|
|
err:
|
|
return ret;
|
|
}
|
|
|
|
static int __devexit of_fsl_espi_remove(struct platform_device *dev)
|
|
{
|
|
return mpc8xxx_spi_remove(&dev->dev);
|
|
}
|
|
|
|
static const struct of_device_id of_fsl_espi_match[] = {
|
|
{ .compatible = "fsl,mpc8536-espi" },
|
|
{}
|
|
};
|
|
MODULE_DEVICE_TABLE(of, of_fsl_espi_match);
|
|
|
|
static struct of_platform_driver fsl_espi_driver = {
|
|
.driver = {
|
|
.name = "fsl_espi",
|
|
.owner = THIS_MODULE,
|
|
.of_match_table = of_fsl_espi_match,
|
|
},
|
|
.probe = of_fsl_espi_probe,
|
|
.remove = __devexit_p(of_fsl_espi_remove),
|
|
};
|
|
|
|
static int __init fsl_espi_init(void)
|
|
{
|
|
return of_register_platform_driver(&fsl_espi_driver);
|
|
}
|
|
module_init(fsl_espi_init);
|
|
|
|
static void __exit fsl_espi_exit(void)
|
|
{
|
|
of_unregister_platform_driver(&fsl_espi_driver);
|
|
}
|
|
module_exit(fsl_espi_exit);
|
|
|
|
MODULE_AUTHOR("Mingkai Hu");
|
|
MODULE_DESCRIPTION("Enhanced Freescale SPI Driver");
|
|
MODULE_LICENSE("GPL");
|