renegade-project/linux-next
2
0
Fork 0
mirror of https://github.com/edk2-porting/linux-next.git synced 2024-12-19 10:44:14 +08:00
Code
2a682f8219
linux-next/arch/s390/kernel/compat_signal.c
Sven Schnelle 56e62a7370 s390: convert to generic entry 
This patch converts s390 to use the generic entry infrastructure from
kernel/entry/*.

There are a few special things on s390:

- PIF_PER_TRAP is moved to TIF_PER_TRAP as the generic code doesn't
  know about our PIF flags in exit_to_user_mode_loop().

- The old code had several ways to restart syscalls:

  a) PIF_SYSCALL_RESTART, which was only set during execve to force a
     restart after upgrading a process (usually qemu-kvm) to pgste page
     table extensions.

  b) PIF_SYSCALL, which is set by do_signal() to indicate that the
     current syscall should be restarted. This is changed so that
     do_signal() now also uses PIF_SYSCALL_RESTART. Continuing to use
     PIF_SYSCALL doesn't work with the generic code, and changing it
     to PIF_SYSCALL_RESTART makes PIF_SYSCALL and PIF_SYSCALL_RESTART
     more unique.

- On s390 calling sys_sigreturn or sys_rt_sigreturn is implemented by
executing a svc instruction on the process stack which causes a fault.
While handling that fault the fault code sets PIF_SYSCALL to hand over
processing to the syscall code on exit to usermode.

The patch introduces PIF_SYSCALL_RET_SET, which is set if ptrace sets
a return value for a syscall. The s390x ptrace ABI uses r2 both for the
syscall number and return value, so ptrace cannot set the syscall number +
return value at the same time. The flag makes handling that a bit easier.
do_syscall() will just skip executing the syscall if PIF_SYSCALL_RET_SET
is set.

CONFIG_DEBUG_ASCE was removd in favour of the generic CONFIG_DEBUG_ENTRY.
CR1/7/13 will be checked both on kernel entry and exit to contain the
correct asces.

Signed-off-by: Sven Schnelle <svens@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2021-01-19 12:29:26 +01:00

430 lines
12 KiB
C
Raw Blame History

// SPDX-License-Identifier: GPL-2.0
/*
* Copyright IBM Corp. 2000, 2006
* Author(s): Denis Joseph Barrow (djbarrow@de.ibm.com,barrow_dj@yahoo.com)
* Gerhard Tonn (ton@de.ibm.com)
*
* Copyright (C) 1991, 1992 Linus Torvalds
*
* 1997-11-28 Modified for POSIX.1b signals by Richard Henderson
*/
#include <linux/compat.h>
#include <linux/sched.h>
#include <linux/sched/task_stack.h>
#include <linux/mm.h>
#include <linux/smp.h>
#include <linux/kernel.h>
#include <linux/signal.h>
#include <linux/errno.h>
#include <linux/wait.h>
#include <linux/ptrace.h>
#include <linux/unistd.h>
#include <linux/stddef.h>
#include <linux/tty.h>
#include <linux/personality.h>
#include <linux/binfmts.h>
#include <asm/ucontext.h>
#include <linux/uaccess.h>
#include <asm/lowcore.h>
#include <asm/switch_to.h>
#include "compat_linux.h"
#include "compat_ptrace.h"
#include "entry.h"
typedef struct
{
__u8 callee_used_stack[__SIGNAL_FRAMESIZE32];
struct sigcontext32 sc;
_sigregs32 sregs;
int signo;
_sigregs_ext32 sregs_ext;
__u16 svc_insn; /* Offset of svc_insn is NOT fixed! */
} sigframe32;
typedef struct
{
__u8 callee_used_stack[__SIGNAL_FRAMESIZE32];
__u16 svc_insn;
compat_siginfo_t info;
struct ucontext32 uc;
} rt_sigframe32;
/* Store registers needed to create the signal frame */
static void store_sigregs(void)
{
save_access_regs(current->thread.acrs);
save_fpu_regs();
}
/* Load registers after signal return */
static void load_sigregs(void)
{
restore_access_regs(current->thread.acrs);
}
static int save_sigregs32(struct pt_regs *regs, _sigregs32 __user *sregs)
{
_sigregs32 user_sregs;
int i;
user_sregs.regs.psw.mask = (__u32)(regs->psw.mask >> 32);
user_sregs.regs.psw.mask &= PSW32_MASK_USER | PSW32_MASK_RI;
user_sregs.regs.psw.mask |= PSW32_USER_BITS;
user_sregs.regs.psw.addr = (__u32) regs->psw.addr |
(__u32)(regs->psw.mask & PSW_MASK_BA);
for (i = 0; i < NUM_GPRS; i++)
user_sregs.regs.gprs[i] = (__u32) regs->gprs[i];
memcpy(&user_sregs.regs.acrs, current->thread.acrs,
sizeof(user_sregs.regs.acrs));
fpregs_store((_s390_fp_regs *) &user_sregs.fpregs, &current->thread.fpu);
if (__copy_to_user(sregs, &user_sregs, sizeof(_sigregs32)))
return -EFAULT;
return 0;
}
static int restore_sigregs32(struct pt_regs *regs,_sigregs32 __user *sregs)
{
_sigregs32 user_sregs;
int i;
/* Alwys make any pending restarted system call return -EINTR */
current->restart_block.fn = do_no_restart_syscall;
if (__copy_from_user(&user_sregs, &sregs->regs, sizeof(user_sregs)))
return -EFAULT;
if (!is_ri_task(current) && (user_sregs.regs.psw.mask & PSW32_MASK_RI))
return -EINVAL;
/* Test the floating-point-control word. */
if (test_fp_ctl(user_sregs.fpregs.fpc))
return -EINVAL;
/* Use regs->psw.mask instead of PSW_USER_BITS to preserve PER bit. */
regs->psw.mask = (regs->psw.mask & ~(PSW_MASK_USER | PSW_MASK_RI)) |
(__u64)(user_sregs.regs.psw.mask & PSW32_MASK_USER) << 32 |
(__u64)(user_sregs.regs.psw.mask & PSW32_MASK_RI) << 32 |
(__u64)(user_sregs.regs.psw.addr & PSW32_ADDR_AMODE);
/* Check for invalid user address space control. */
if ((regs->psw.mask & PSW_MASK_ASC) == PSW_ASC_HOME)
regs->psw.mask = PSW_ASC_PRIMARY |
(regs->psw.mask & ~PSW_MASK_ASC);
regs->psw.addr = (__u64)(user_sregs.regs.psw.addr & PSW32_ADDR_INSN);
for (i = 0; i < NUM_GPRS; i++)
regs->gprs[i] = (__u64) user_sregs.regs.gprs[i];
memcpy(&current->thread.acrs, &user_sregs.regs.acrs,
sizeof(current->thread.acrs));
fpregs_load((_s390_fp_regs *) &user_sregs.fpregs, &current->thread.fpu);
clear_pt_regs_flag(regs, PIF_SYSCALL); /* No longer in a system call */
clear_pt_regs_flag(regs, PIF_SYSCALL_RESTART);
return 0;
}
static int save_sigregs_ext32(struct pt_regs *regs,
_sigregs_ext32 __user *sregs_ext)
{
__u32 gprs_high[NUM_GPRS];
__u64 vxrs[__NUM_VXRS_LOW];
int i;
/* Save high gprs to signal stack */
for (i = 0; i < NUM_GPRS; i++)
gprs_high[i] = regs->gprs[i] >> 32;
if (__copy_to_user(&sregs_ext->gprs_high, &gprs_high,
sizeof(sregs_ext->gprs_high)))
return -EFAULT;
/* Save vector registers to signal stack */
if (MACHINE_HAS_VX) {
for (i = 0; i < __NUM_VXRS_LOW; i++)
vxrs[i] = *((__u64 *)(current->thread.fpu.vxrs + i) + 1);
if (__copy_to_user(&sregs_ext->vxrs_low, vxrs,
sizeof(sregs_ext->vxrs_low)) ||
__copy_to_user(&sregs_ext->vxrs_high,
current->thread.fpu.vxrs + __NUM_VXRS_LOW,
sizeof(sregs_ext->vxrs_high)))
return -EFAULT;
}
return 0;
}
static int restore_sigregs_ext32(struct pt_regs *regs,
_sigregs_ext32 __user *sregs_ext)
{
__u32 gprs_high[NUM_GPRS];
__u64 vxrs[__NUM_VXRS_LOW];
int i;
/* Restore high gprs from signal stack */
if (__copy_from_user(&gprs_high, &sregs_ext->gprs_high,
sizeof(sregs_ext->gprs_high)))
return -EFAULT;
for (i = 0; i < NUM_GPRS; i++)
*(__u32 *)&regs->gprs[i] = gprs_high[i];
/* Restore vector registers from signal stack */
if (MACHINE_HAS_VX) {
if (__copy_from_user(vxrs, &sregs_ext->vxrs_low,
sizeof(sregs_ext->vxrs_low)) ||
__copy_from_user(current->thread.fpu.vxrs + __NUM_VXRS_LOW,
&sregs_ext->vxrs_high,
sizeof(sregs_ext->vxrs_high)))
return -EFAULT;
for (i = 0; i < __NUM_VXRS_LOW; i++)
*((__u64 *)(current->thread.fpu.vxrs + i) + 1) = vxrs[i];
}
return 0;
}
COMPAT_SYSCALL_DEFINE0(sigreturn)
{
struct pt_regs *regs = task_pt_regs(current);
sigframe32 __user *frame = (sigframe32 __user *)regs->gprs[15];
sigset_t set;
if (get_compat_sigset(&set, (compat_sigset_t __user *)frame->sc.oldmask))
goto badframe;
set_current_blocked(&set);
save_fpu_regs();
if (restore_sigregs32(regs, &frame->sregs))
goto badframe;
if (restore_sigregs_ext32(regs, &frame->sregs_ext))
goto badframe;
load_sigregs();
return regs->gprs[2];
badframe:
force_sig(SIGSEGV);
return 0;
}
COMPAT_SYSCALL_DEFINE0(rt_sigreturn)
{
struct pt_regs *regs = task_pt_regs(current);
rt_sigframe32 __user *frame = (rt_sigframe32 __user *)regs->gprs[15];
sigset_t set;
if (get_compat_sigset(&set, &frame->uc.uc_sigmask))
goto badframe;
set_current_blocked(&set);
if (compat_restore_altstack(&frame->uc.uc_stack))
goto badframe;
save_fpu_regs();
if (restore_sigregs32(regs, &frame->uc.uc_mcontext))
goto badframe;
if (restore_sigregs_ext32(regs, &frame->uc.uc_mcontext_ext))
goto badframe;
load_sigregs();
return regs->gprs[2];
badframe:
force_sig(SIGSEGV);
return 0;
}
/*
* Set up a signal frame.
*/
/*
* Determine which stack to use..
*/
static inline void __user *
get_sigframe(struct k_sigaction *ka, struct pt_regs * regs, size_t frame_size)
{
unsigned long sp;
/* Default to using normal stack */
sp = (unsigned long) A(regs->gprs[15]);
/* Overflow on alternate signal stack gives SIGSEGV. */
if (on_sig_stack(sp) && !on_sig_stack((sp - frame_size) & -8UL))
return (void __user *) -1UL;
/* This is the X/Open sanctioned signal stack switching. */
if (ka->sa.sa_flags & SA_ONSTACK) {
if (! sas_ss_flags(sp))
sp = current->sas_ss_sp + current->sas_ss_size;
}
return (void __user *)((sp - frame_size) & -8ul);
}
static int setup_frame32(struct ksignal *ksig, sigset_t *set,
struct pt_regs *regs)
{
int sig = ksig->sig;
sigframe32 __user *frame;
unsigned long restorer;
size_t frame_size;
/*
* gprs_high are always present for 31-bit compat tasks.
* The space for vector registers is only allocated if
* the machine supports it
*/
frame_size = sizeof(*frame) - sizeof(frame->sregs_ext.__reserved);
if (!MACHINE_HAS_VX)
frame_size -= sizeof(frame->sregs_ext.vxrs_low) +
sizeof(frame->sregs_ext.vxrs_high);
frame = get_sigframe(&ksig->ka, regs, frame_size);
if (frame == (void __user *) -1UL)
return -EFAULT;
/* Set up backchain. */
if (__put_user(regs->gprs[15], (unsigned int __user *) frame))
return -EFAULT;
/* Create struct sigcontext32 on the signal stack */
if (put_compat_sigset((compat_sigset_t __user *)frame->sc.oldmask,
set, sizeof(compat_sigset_t)))
return -EFAULT;
if (__put_user(ptr_to_compat(&frame->sregs), &frame->sc.sregs))
return -EFAULT;
/* Store registers needed to create the signal frame */
store_sigregs();
/* Create _sigregs32 on the signal stack */
if (save_sigregs32(regs, &frame->sregs))
return -EFAULT;
/* Place signal number on stack to allow backtrace from handler. */
if (__put_user(regs->gprs[2], (int __force __user *) &frame->signo))
return -EFAULT;
/* Create _sigregs_ext32 on the signal stack */
if (save_sigregs_ext32(regs, &frame->sregs_ext))
return -EFAULT;
/* Set up to return from userspace. If provided, use a stub
already in userspace. */
if (ksig->ka.sa.sa_flags & SA_RESTORER) {
restorer = (unsigned long __force)
ksig->ka.sa.sa_restorer | PSW32_ADDR_AMODE;
} else {
/* Signal frames without vectors registers are short ! */
__u16 __user *svc = (void __user *) frame + frame_size - 2;
if (__put_user(S390_SYSCALL_OPCODE | __NR_sigreturn, svc))
return -EFAULT;
restorer = (unsigned long __force) svc | PSW32_ADDR_AMODE;
}
/* Set up registers for signal handler */
regs->gprs[14] = restorer;
regs->gprs[15] = (__force __u64) frame;
/* Force 31 bit amode and default user address space control. */
regs->psw.mask = PSW_MASK_BA |
(PSW_USER_BITS & PSW_MASK_ASC) |
(regs->psw.mask & ~PSW_MASK_ASC);
regs->psw.addr = (__force __u64) ksig->ka.sa.sa_handler;
regs->gprs[2] = sig;
regs->gprs[3] = (__force __u64) &frame->sc;
/* We forgot to include these in the sigcontext.
To avoid breaking binary compatibility, they are passed as args. */
if (sig == SIGSEGV || sig == SIGBUS || sig == SIGILL ||
sig == SIGTRAP || sig == SIGFPE) {
/* set extra registers only for synchronous signals */
regs->gprs[4] = regs->int_code & 127;
regs->gprs[5] = regs->int_parm_long;
regs->gprs[6] = current->thread.last_break;
}
return 0;
}
static int setup_rt_frame32(struct ksignal *ksig, sigset_t *set,
struct pt_regs *regs)
{
rt_sigframe32 __user *frame;
unsigned long restorer;
size_t frame_size;
u32 uc_flags;
frame_size = sizeof(*frame) -
sizeof(frame->uc.uc_mcontext_ext.__reserved);
/*
* gprs_high are always present for 31-bit compat tasks.
* The space for vector registers is only allocated if
* the machine supports it
*/
uc_flags = UC_GPRS_HIGH;
if (MACHINE_HAS_VX) {
uc_flags |= UC_VXRS;
} else
frame_size -= sizeof(frame->uc.uc_mcontext_ext.vxrs_low) +
sizeof(frame->uc.uc_mcontext_ext.vxrs_high);
frame = get_sigframe(&ksig->ka, regs, frame_size);
if (frame == (void __user *) -1UL)
return -EFAULT;
/* Set up backchain. */
if (__put_user(regs->gprs[15], (unsigned int __force __user *) frame))
return -EFAULT;
/* Set up to return from userspace. If provided, use a stub
already in userspace. */
if (ksig->ka.sa.sa_flags & SA_RESTORER) {
restorer = (unsigned long __force)
ksig->ka.sa.sa_restorer | PSW32_ADDR_AMODE;
} else {
__u16 __user *svc = &frame->svc_insn;
if (__put_user(S390_SYSCALL_OPCODE | __NR_rt_sigreturn, svc))
return -EFAULT;
restorer = (unsigned long __force) svc | PSW32_ADDR_AMODE;
}
/* Create siginfo on the signal stack */
if (copy_siginfo_to_user32(&frame->info, &ksig->info))
return -EFAULT;
/* Store registers needed to create the signal frame */
store_sigregs();
/* Create ucontext on the signal stack. */
if (__put_user(uc_flags, &frame->uc.uc_flags) ||
__put_user(0, &frame->uc.uc_link) ||
__compat_save_altstack(&frame->uc.uc_stack, regs->gprs[15]) ||
save_sigregs32(regs, &frame->uc.uc_mcontext) ||
put_compat_sigset(&frame->uc.uc_sigmask, set, sizeof(compat_sigset_t)) ||
save_sigregs_ext32(regs, &frame->uc.uc_mcontext_ext))
return -EFAULT;
/* Set up registers for signal handler */
regs->gprs[14] = restorer;
regs->gprs[15] = (__force __u64) frame;
/* Force 31 bit amode and default user address space control. */
regs->psw.mask = PSW_MASK_BA |
(PSW_USER_BITS & PSW_MASK_ASC) |
(regs->psw.mask & ~PSW_MASK_ASC);
regs->psw.addr = (__u64 __force) ksig->ka.sa.sa_handler;
regs->gprs[2] = ksig->sig;
regs->gprs[3] = (__force __u64) &frame->info;
regs->gprs[4] = (__force __u64) &frame->uc;
regs->gprs[5] = current->thread.last_break;
return 0;
}
/*
* OK, we're invoking a handler
*/
void handle_signal32(struct ksignal *ksig, sigset_t *oldset,
struct pt_regs *regs)
{
int ret;
/* Set up the stack frame */
if (ksig->ka.sa.sa_flags & SA_SIGINFO)
ret = setup_rt_frame32(ksig, oldset, regs);
else
ret = setup_frame32(ksig, oldset, regs);
signal_setup_done(ret, ksig, test_thread_flag(TIF_SINGLE_STEP));
}
View Git Blame Copy Permalink