mirror of
https://github.com/edk2-porting/linux-next.git
synced 2024-12-27 06:34:11 +08:00
6cbf13e311
Rename the DSI controller nodes from "dsi-controller@" to "dsi@" so they match the naming convention in the YAML schema for DSI controllers. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Link: https://lore.kernel.org/r/20201104133758.1373298-1-linus.walleij@linaro.org Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
1145 lines
28 KiB
Plaintext
1145 lines
28 KiB
Plaintext
// SPDX-License-Identifier: GPL-2.0-or-later
|
|
/*
|
|
* Copyright 2012 Linaro Ltd
|
|
*/
|
|
|
|
#include <dt-bindings/interrupt-controller/irq.h>
|
|
#include <dt-bindings/interrupt-controller/arm-gic.h>
|
|
#include <dt-bindings/mfd/dbx500-prcmu.h>
|
|
#include <dt-bindings/arm/ux500_pm_domains.h>
|
|
#include <dt-bindings/gpio/gpio.h>
|
|
#include <dt-bindings/thermal/thermal.h>
|
|
|
|
/ {
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
|
|
/* This stablilizes the device enumeration */
|
|
aliases {
|
|
i2c0 = &i2c0;
|
|
i2c1 = &i2c1;
|
|
i2c2 = &i2c2;
|
|
i2c3 = &i2c3;
|
|
i2c4 = &i2c4;
|
|
spi0 = &spi0;
|
|
spi1 = &spi1;
|
|
spi2 = &spi2;
|
|
spi3 = &spi3;
|
|
serial0 = &serial0;
|
|
serial1 = &serial1;
|
|
serial2 = &serial2;
|
|
};
|
|
|
|
chosen {
|
|
};
|
|
|
|
cpus {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
enable-method = "ste,dbx500-smp";
|
|
|
|
cpu-map {
|
|
cluster0 {
|
|
core0 {
|
|
cpu = <&CPU0>;
|
|
};
|
|
core1 {
|
|
cpu = <&CPU1>;
|
|
};
|
|
};
|
|
};
|
|
CPU0: cpu@300 {
|
|
device_type = "cpu";
|
|
compatible = "arm,cortex-a9";
|
|
reg = <0x300>;
|
|
clocks = <&prcmu_clk PRCMU_ARMSS>;
|
|
clock-names = "cpu";
|
|
clock-latency = <20000>;
|
|
#cooling-cells = <2>;
|
|
};
|
|
CPU1: cpu@301 {
|
|
device_type = "cpu";
|
|
compatible = "arm,cortex-a9";
|
|
reg = <0x301>;
|
|
};
|
|
};
|
|
|
|
thermal-zones {
|
|
/*
|
|
* Thermal zone for the SoC, using the thermal sensor in the
|
|
* PRCMU for temperature and the cpufreq driver for passive
|
|
* cooling.
|
|
*/
|
|
cpu_thermal: cpu-thermal {
|
|
polling-delay-passive = <250>;
|
|
/*
|
|
* This sensor fires interrupts to update the thermal
|
|
* zone, so no polling is needed.
|
|
*/
|
|
polling-delay = <0>;
|
|
|
|
thermal-sensors = <&thermal>;
|
|
|
|
trips {
|
|
cpu_alert: cpu-alert {
|
|
temperature = <70000>;
|
|
hysteresis = <2000>;
|
|
type = "passive";
|
|
};
|
|
cpu-crit {
|
|
temperature = <85000>;
|
|
hysteresis = <0>;
|
|
type = "critical";
|
|
};
|
|
};
|
|
|
|
cooling-maps {
|
|
trip = <&cpu_alert>;
|
|
cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
|
|
contribution = <100>;
|
|
};
|
|
};
|
|
};
|
|
|
|
soc {
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
compatible = "stericsson,db8500", "simple-bus";
|
|
interrupt-parent = <&intc>;
|
|
ranges;
|
|
|
|
ptm@801ae000 {
|
|
compatible = "arm,coresight-etm3x", "arm,primecell";
|
|
reg = <0x801ae000 0x1000>;
|
|
|
|
clocks = <&prcmu_clk PRCMU_APETRACECLK>, <&prcmu_clk PRCMU_APEATCLK>;
|
|
clock-names = "apb_pclk", "atclk";
|
|
cpu = <&CPU0>;
|
|
out-ports {
|
|
port {
|
|
ptm0_out_port: endpoint {
|
|
remote-endpoint = <&funnel_in_port0>;
|
|
};
|
|
};
|
|
};
|
|
};
|
|
|
|
ptm@801af000 {
|
|
compatible = "arm,coresight-etm3x", "arm,primecell";
|
|
reg = <0x801af000 0x1000>;
|
|
|
|
clocks = <&prcmu_clk PRCMU_APETRACECLK>, <&prcmu_clk PRCMU_APEATCLK>;
|
|
clock-names = "apb_pclk", "atclk";
|
|
cpu = <&CPU1>;
|
|
out-ports {
|
|
port {
|
|
ptm1_out_port: endpoint {
|
|
remote-endpoint = <&funnel_in_port1>;
|
|
};
|
|
};
|
|
};
|
|
};
|
|
|
|
funnel@801a6000 {
|
|
compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
|
|
reg = <0x801a6000 0x1000>;
|
|
|
|
clocks = <&prcmu_clk PRCMU_APETRACECLK>, <&prcmu_clk PRCMU_APEATCLK>;
|
|
clock-names = "apb_pclk", "atclk";
|
|
out-ports {
|
|
port {
|
|
funnel_out_port: endpoint {
|
|
remote-endpoint =
|
|
<&replicator_in_port0>;
|
|
};
|
|
};
|
|
};
|
|
|
|
in-ports {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
port@0 {
|
|
reg = <0>;
|
|
funnel_in_port0: endpoint {
|
|
remote-endpoint = <&ptm0_out_port>;
|
|
};
|
|
};
|
|
|
|
port@1 {
|
|
reg = <1>;
|
|
funnel_in_port1: endpoint {
|
|
remote-endpoint = <&ptm1_out_port>;
|
|
};
|
|
};
|
|
};
|
|
};
|
|
|
|
replicator {
|
|
compatible = "arm,coresight-static-replicator";
|
|
clocks = <&prcmu_clk PRCMU_APEATCLK>;
|
|
clock-names = "atclk";
|
|
|
|
out-ports {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
port@0 {
|
|
reg = <0>;
|
|
replicator_out_port0: endpoint {
|
|
remote-endpoint = <&tpiu_in_port>;
|
|
};
|
|
};
|
|
port@1 {
|
|
reg = <1>;
|
|
replicator_out_port1: endpoint {
|
|
remote-endpoint = <&etb_in_port>;
|
|
};
|
|
};
|
|
};
|
|
|
|
in-ports {
|
|
port {
|
|
replicator_in_port0: endpoint {
|
|
remote-endpoint = <&funnel_out_port>;
|
|
};
|
|
};
|
|
};
|
|
};
|
|
|
|
tpiu@80190000 {
|
|
compatible = "arm,coresight-tpiu", "arm,primecell";
|
|
reg = <0x80190000 0x1000>;
|
|
|
|
clocks = <&prcmu_clk PRCMU_APETRACECLK>, <&prcmu_clk PRCMU_APEATCLK>;
|
|
clock-names = "apb_pclk", "atclk";
|
|
in-ports {
|
|
port {
|
|
tpiu_in_port: endpoint {
|
|
remote-endpoint = <&replicator_out_port0>;
|
|
};
|
|
};
|
|
};
|
|
};
|
|
|
|
etb@801a4000 {
|
|
compatible = "arm,coresight-etb10", "arm,primecell";
|
|
reg = <0x801a4000 0x1000>;
|
|
|
|
clocks = <&prcmu_clk PRCMU_APETRACECLK>, <&prcmu_clk PRCMU_APEATCLK>;
|
|
clock-names = "apb_pclk", "atclk";
|
|
in-ports {
|
|
port {
|
|
etb_in_port: endpoint {
|
|
remote-endpoint = <&replicator_out_port1>;
|
|
};
|
|
};
|
|
};
|
|
};
|
|
|
|
intc: interrupt-controller@a0411000 {
|
|
compatible = "arm,cortex-a9-gic";
|
|
#interrupt-cells = <3>;
|
|
#address-cells = <1>;
|
|
interrupt-controller;
|
|
reg = <0xa0411000 0x1000>,
|
|
<0xa0410100 0x100>;
|
|
};
|
|
|
|
scu@a0410000 {
|
|
compatible = "arm,cortex-a9-scu";
|
|
reg = <0xa0410000 0x100>;
|
|
};
|
|
|
|
/*
|
|
* The backup RAM is used for retention during sleep
|
|
* and various things like spin tables
|
|
*/
|
|
backupram@80150000 {
|
|
compatible = "ste,dbx500-backupram";
|
|
reg = <0x80150000 0x2000>;
|
|
};
|
|
|
|
L2: cache-controller {
|
|
compatible = "arm,pl310-cache";
|
|
reg = <0xa0412000 0x1000>;
|
|
interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
|
|
cache-unified;
|
|
cache-level = <2>;
|
|
};
|
|
|
|
pmu {
|
|
compatible = "arm,cortex-a9-pmu";
|
|
interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
|
|
};
|
|
|
|
pm_domains: pm_domains0 {
|
|
compatible = "stericsson,ux500-pm-domains";
|
|
#power-domain-cells = <1>;
|
|
};
|
|
|
|
clocks {
|
|
compatible = "stericsson,u8500-clks";
|
|
/*
|
|
* Registers for the CLKRST block on peripheral
|
|
* groups 1, 2, 3, 5, 6,
|
|
*/
|
|
reg = <0x8012f000 0x1000>, <0x8011f000 0x1000>,
|
|
<0x8000f000 0x1000>, <0xa03ff000 0x1000>,
|
|
<0xa03cf000 0x1000>;
|
|
|
|
prcmu_clk: prcmu-clock {
|
|
#clock-cells = <1>;
|
|
};
|
|
|
|
prcc_pclk: prcc-periph-clock {
|
|
#clock-cells = <2>;
|
|
};
|
|
|
|
prcc_kclk: prcc-kernel-clock {
|
|
#clock-cells = <2>;
|
|
};
|
|
|
|
rtc_clk: rtc32k-clock {
|
|
#clock-cells = <0>;
|
|
};
|
|
|
|
smp_twd_clk: smp-twd-clock {
|
|
#clock-cells = <0>;
|
|
};
|
|
};
|
|
|
|
mtu@a03c6000 {
|
|
/* Nomadik System Timer */
|
|
compatible = "st,nomadik-mtu";
|
|
reg = <0xa03c6000 0x1000>;
|
|
interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
|
|
|
|
clocks = <&prcmu_clk PRCMU_TIMCLK>, <&prcc_pclk 6 6>;
|
|
clock-names = "timclk", "apb_pclk";
|
|
};
|
|
|
|
timer@a0410600 {
|
|
compatible = "arm,cortex-a9-twd-timer";
|
|
reg = <0xa0410600 0x20>;
|
|
interrupts = <GIC_PPI 13 (GIC_CPU_MASK_RAW(3) | IRQ_TYPE_LEVEL_HIGH)>;
|
|
|
|
clocks = <&smp_twd_clk>;
|
|
};
|
|
|
|
watchdog@a0410620 {
|
|
compatible = "arm,cortex-a9-twd-wdt";
|
|
reg = <0xa0410620 0x20>;
|
|
interrupts = <GIC_PPI 14 (GIC_CPU_MASK_RAW(3) | IRQ_TYPE_LEVEL_HIGH)>;
|
|
clocks = <&smp_twd_clk>;
|
|
};
|
|
|
|
rtc@80154000 {
|
|
compatible = "arm,pl031", "arm,primecell";
|
|
reg = <0x80154000 0x1000>;
|
|
interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>;
|
|
|
|
clocks = <&rtc_clk>;
|
|
clock-names = "apb_pclk";
|
|
};
|
|
|
|
gpio0: gpio@8012e000 {
|
|
compatible = "stericsson,db8500-gpio",
|
|
"st,nomadik-gpio";
|
|
reg = <0x8012e000 0x80>;
|
|
interrupts = <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>;
|
|
interrupt-controller;
|
|
#interrupt-cells = <2>;
|
|
st,supports-sleepmode;
|
|
gpio-controller;
|
|
#gpio-cells = <2>;
|
|
gpio-bank = <0>;
|
|
gpio-ranges = <&pinctrl 0 0 32>;
|
|
clocks = <&prcc_pclk 1 9>;
|
|
};
|
|
|
|
gpio1: gpio@8012e080 {
|
|
compatible = "stericsson,db8500-gpio",
|
|
"st,nomadik-gpio";
|
|
reg = <0x8012e080 0x80>;
|
|
interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>;
|
|
interrupt-controller;
|
|
#interrupt-cells = <2>;
|
|
st,supports-sleepmode;
|
|
gpio-controller;
|
|
#gpio-cells = <2>;
|
|
gpio-bank = <1>;
|
|
gpio-ranges = <&pinctrl 0 32 5>;
|
|
clocks = <&prcc_pclk 1 9>;
|
|
};
|
|
|
|
gpio2: gpio@8000e000 {
|
|
compatible = "stericsson,db8500-gpio",
|
|
"st,nomadik-gpio";
|
|
reg = <0x8000e000 0x80>;
|
|
interrupts = <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>;
|
|
interrupt-controller;
|
|
#interrupt-cells = <2>;
|
|
st,supports-sleepmode;
|
|
gpio-controller;
|
|
#gpio-cells = <2>;
|
|
gpio-bank = <2>;
|
|
gpio-ranges = <&pinctrl 0 64 32>;
|
|
clocks = <&prcc_pclk 3 8>;
|
|
};
|
|
|
|
gpio3: gpio@8000e080 {
|
|
compatible = "stericsson,db8500-gpio",
|
|
"st,nomadik-gpio";
|
|
reg = <0x8000e080 0x80>;
|
|
interrupts = <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>;
|
|
interrupt-controller;
|
|
#interrupt-cells = <2>;
|
|
st,supports-sleepmode;
|
|
gpio-controller;
|
|
#gpio-cells = <2>;
|
|
gpio-bank = <3>;
|
|
gpio-ranges = <&pinctrl 0 96 2>;
|
|
clocks = <&prcc_pclk 3 8>;
|
|
};
|
|
|
|
gpio4: gpio@8000e100 {
|
|
compatible = "stericsson,db8500-gpio",
|
|
"st,nomadik-gpio";
|
|
reg = <0x8000e100 0x80>;
|
|
interrupts = <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>;
|
|
interrupt-controller;
|
|
#interrupt-cells = <2>;
|
|
st,supports-sleepmode;
|
|
gpio-controller;
|
|
#gpio-cells = <2>;
|
|
gpio-bank = <4>;
|
|
gpio-ranges = <&pinctrl 0 128 32>;
|
|
clocks = <&prcc_pclk 3 8>;
|
|
};
|
|
|
|
gpio5: gpio@8000e180 {
|
|
compatible = "stericsson,db8500-gpio",
|
|
"st,nomadik-gpio";
|
|
reg = <0x8000e180 0x80>;
|
|
interrupts = <GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>;
|
|
interrupt-controller;
|
|
#interrupt-cells = <2>;
|
|
st,supports-sleepmode;
|
|
gpio-controller;
|
|
#gpio-cells = <2>;
|
|
gpio-bank = <5>;
|
|
gpio-ranges = <&pinctrl 0 160 12>;
|
|
clocks = <&prcc_pclk 3 8>;
|
|
};
|
|
|
|
gpio6: gpio@8011e000 {
|
|
compatible = "stericsson,db8500-gpio",
|
|
"st,nomadik-gpio";
|
|
reg = <0x8011e000 0x80>;
|
|
interrupts = <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>;
|
|
interrupt-controller;
|
|
#interrupt-cells = <2>;
|
|
st,supports-sleepmode;
|
|
gpio-controller;
|
|
#gpio-cells = <2>;
|
|
gpio-bank = <6>;
|
|
gpio-ranges = <&pinctrl 0 192 32>;
|
|
clocks = <&prcc_pclk 2 11>;
|
|
};
|
|
|
|
gpio7: gpio@8011e080 {
|
|
compatible = "stericsson,db8500-gpio",
|
|
"st,nomadik-gpio";
|
|
reg = <0x8011e080 0x80>;
|
|
interrupts = <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>;
|
|
interrupt-controller;
|
|
#interrupt-cells = <2>;
|
|
st,supports-sleepmode;
|
|
gpio-controller;
|
|
#gpio-cells = <2>;
|
|
gpio-bank = <7>;
|
|
gpio-ranges = <&pinctrl 0 224 7>;
|
|
clocks = <&prcc_pclk 2 11>;
|
|
};
|
|
|
|
gpio8: gpio@a03fe000 {
|
|
compatible = "stericsson,db8500-gpio",
|
|
"st,nomadik-gpio";
|
|
reg = <0xa03fe000 0x80>;
|
|
interrupts = <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>;
|
|
interrupt-controller;
|
|
#interrupt-cells = <2>;
|
|
st,supports-sleepmode;
|
|
gpio-controller;
|
|
#gpio-cells = <2>;
|
|
gpio-bank = <8>;
|
|
gpio-ranges = <&pinctrl 0 256 12>;
|
|
clocks = <&prcc_pclk 5 1>;
|
|
};
|
|
|
|
pinctrl: pinctrl {
|
|
compatible = "stericsson,db8500-pinctrl";
|
|
nomadik-gpio-chips = <&gpio0>, <&gpio1>, <&gpio2>, <&gpio3>,
|
|
<&gpio4>, <&gpio5>, <&gpio6>, <&gpio7>,
|
|
<&gpio8>;
|
|
prcm = <&prcmu>;
|
|
};
|
|
|
|
usb_per5@a03e0000 {
|
|
compatible = "stericsson,db8500-musb";
|
|
reg = <0xa03e0000 0x10000>;
|
|
interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
|
|
interrupt-names = "mc";
|
|
|
|
dr_mode = "otg";
|
|
|
|
dmas = <&dma 38 0 0x2>, /* Logical - DevToMem */
|
|
<&dma 38 0 0x0>, /* Logical - MemToDev */
|
|
<&dma 37 0 0x2>, /* Logical - DevToMem */
|
|
<&dma 37 0 0x0>, /* Logical - MemToDev */
|
|
<&dma 36 0 0x2>, /* Logical - DevToMem */
|
|
<&dma 36 0 0x0>, /* Logical - MemToDev */
|
|
<&dma 19 0 0x2>, /* Logical - DevToMem */
|
|
<&dma 19 0 0x0>, /* Logical - MemToDev */
|
|
<&dma 18 0 0x2>, /* Logical - DevToMem */
|
|
<&dma 18 0 0x0>, /* Logical - MemToDev */
|
|
<&dma 17 0 0x2>, /* Logical - DevToMem */
|
|
<&dma 17 0 0x0>, /* Logical - MemToDev */
|
|
<&dma 16 0 0x2>, /* Logical - DevToMem */
|
|
<&dma 16 0 0x0>, /* Logical - MemToDev */
|
|
<&dma 39 0 0x2>, /* Logical - DevToMem */
|
|
<&dma 39 0 0x0>; /* Logical - MemToDev */
|
|
|
|
dma-names = "iep_1_9", "oep_1_9",
|
|
"iep_2_10", "oep_2_10",
|
|
"iep_3_11", "oep_3_11",
|
|
"iep_4_12", "oep_4_12",
|
|
"iep_5_13", "oep_5_13",
|
|
"iep_6_14", "oep_6_14",
|
|
"iep_7_15", "oep_7_15",
|
|
"iep_8", "oep_8";
|
|
|
|
clocks = <&prcc_pclk 5 0>;
|
|
};
|
|
|
|
dma: dma-controller@801C0000 {
|
|
compatible = "stericsson,db8500-dma40", "stericsson,dma40";
|
|
reg = <0x801C0000 0x1000 0x40010000 0x800>;
|
|
reg-names = "base", "lcpa";
|
|
interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
|
|
|
|
#dma-cells = <3>;
|
|
memcpy-channels = <56 57 58 59 60>;
|
|
|
|
clocks = <&prcmu_clk PRCMU_DMACLK>;
|
|
};
|
|
|
|
prcmu: prcmu@80157000 {
|
|
compatible = "stericsson,db8500-prcmu", "syscon";
|
|
reg = <0x80157000 0x2000>, <0x801b0000 0x8000>, <0x801b8000 0x1000>;
|
|
reg-names = "prcmu", "prcmu-tcpm", "prcmu-tcdm";
|
|
interrupts = <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>;
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
interrupt-controller;
|
|
#interrupt-cells = <2>;
|
|
ranges;
|
|
|
|
prcmu-timer-4@80157450 {
|
|
compatible = "stericsson,db8500-prcmu-timer-4";
|
|
reg = <0x80157450 0xC>;
|
|
};
|
|
|
|
thermal: thermal@801573c0 {
|
|
compatible = "stericsson,db8500-thermal";
|
|
reg = <0x801573c0 0x40>;
|
|
interrupt-parent = <&prcmu>;
|
|
interrupts = <21 IRQ_TYPE_LEVEL_HIGH>,
|
|
<22 IRQ_TYPE_LEVEL_HIGH>;
|
|
interrupt-names = "IRQ_HOTMON_LOW", "IRQ_HOTMON_HIGH";
|
|
#thermal-sensor-cells = <0>;
|
|
};
|
|
|
|
db8500-prcmu-regulators {
|
|
compatible = "stericsson,db8500-prcmu-regulator";
|
|
|
|
// DB8500_REGULATOR_VAPE
|
|
db8500_vape_reg: db8500_vape {
|
|
regulator-always-on;
|
|
};
|
|
|
|
// DB8500_REGULATOR_VARM
|
|
db8500_varm_reg: db8500_varm {
|
|
};
|
|
|
|
// DB8500_REGULATOR_VMODEM
|
|
db8500_vmodem_reg: db8500_vmodem {
|
|
};
|
|
|
|
// DB8500_REGULATOR_VPLL
|
|
db8500_vpll_reg: db8500_vpll {
|
|
};
|
|
|
|
// DB8500_REGULATOR_VSMPS1
|
|
db8500_vsmps1_reg: db8500_vsmps1 {
|
|
};
|
|
|
|
// DB8500_REGULATOR_VSMPS2
|
|
db8500_vsmps2_reg: db8500_vsmps2 {
|
|
};
|
|
|
|
// DB8500_REGULATOR_VSMPS3
|
|
db8500_vsmps3_reg: db8500_vsmps3 {
|
|
};
|
|
|
|
// DB8500_REGULATOR_VRF1
|
|
db8500_vrf1_reg: db8500_vrf1 {
|
|
};
|
|
|
|
// DB8500_REGULATOR_SWITCH_SVAMMDSP
|
|
db8500_sva_mmdsp_reg: db8500_sva_mmdsp {
|
|
};
|
|
|
|
// DB8500_REGULATOR_SWITCH_SVAMMDSPRET
|
|
db8500_sva_mmdsp_ret_reg: db8500_sva_mmdsp_ret {
|
|
};
|
|
|
|
// DB8500_REGULATOR_SWITCH_SVAPIPE
|
|
db8500_sva_pipe_reg: db8500_sva_pipe {
|
|
};
|
|
|
|
// DB8500_REGULATOR_SWITCH_SIAMMDSP
|
|
db8500_sia_mmdsp_reg: db8500_sia_mmdsp {
|
|
};
|
|
|
|
// DB8500_REGULATOR_SWITCH_SIAMMDSPRET
|
|
db8500_sia_mmdsp_ret_reg: db8500_sia_mmdsp_ret {
|
|
};
|
|
|
|
// DB8500_REGULATOR_SWITCH_SIAPIPE
|
|
db8500_sia_pipe_reg: db8500_sia_pipe {
|
|
};
|
|
|
|
// DB8500_REGULATOR_SWITCH_SGA
|
|
db8500_sga_reg: db8500_sga {
|
|
vin-supply = <&db8500_vape_reg>;
|
|
};
|
|
|
|
// DB8500_REGULATOR_SWITCH_B2R2_MCDE
|
|
db8500_b2r2_mcde_reg: db8500_b2r2_mcde {
|
|
vin-supply = <&db8500_vape_reg>;
|
|
};
|
|
|
|
// DB8500_REGULATOR_SWITCH_ESRAM12
|
|
db8500_esram12_reg: db8500_esram12 {
|
|
};
|
|
|
|
// DB8500_REGULATOR_SWITCH_ESRAM12RET
|
|
db8500_esram12_ret_reg: db8500_esram12_ret {
|
|
};
|
|
|
|
// DB8500_REGULATOR_SWITCH_ESRAM34
|
|
db8500_esram34_reg: db8500_esram34 {
|
|
};
|
|
|
|
// DB8500_REGULATOR_SWITCH_ESRAM34RET
|
|
db8500_esram34_ret_reg: db8500_esram34_ret {
|
|
};
|
|
};
|
|
};
|
|
|
|
i2c0: i2c@80004000 {
|
|
compatible = "stericsson,db8500-i2c", "st,nomadik-i2c", "arm,primecell";
|
|
reg = <0x80004000 0x1000>;
|
|
interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>;
|
|
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
v-i2c-supply = <&db8500_vape_reg>;
|
|
|
|
clock-frequency = <400000>;
|
|
clocks = <&prcc_kclk 3 3>, <&prcc_pclk 3 3>;
|
|
clock-names = "i2cclk", "apb_pclk";
|
|
power-domains = <&pm_domains DOMAIN_VAPE>;
|
|
|
|
status = "disabled";
|
|
};
|
|
|
|
i2c1: i2c@80122000 {
|
|
compatible = "stericsson,db8500-i2c", "st,nomadik-i2c", "arm,primecell";
|
|
reg = <0x80122000 0x1000>;
|
|
interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>;
|
|
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
v-i2c-supply = <&db8500_vape_reg>;
|
|
|
|
clock-frequency = <400000>;
|
|
|
|
clocks = <&prcc_kclk 1 2>, <&prcc_pclk 1 2>;
|
|
clock-names = "i2cclk", "apb_pclk";
|
|
power-domains = <&pm_domains DOMAIN_VAPE>;
|
|
|
|
status = "disabled";
|
|
};
|
|
|
|
i2c2: i2c@80128000 {
|
|
compatible = "stericsson,db8500-i2c", "st,nomadik-i2c", "arm,primecell";
|
|
reg = <0x80128000 0x1000>;
|
|
interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>;
|
|
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
v-i2c-supply = <&db8500_vape_reg>;
|
|
|
|
clock-frequency = <400000>;
|
|
|
|
clocks = <&prcc_kclk 1 6>, <&prcc_pclk 1 6>;
|
|
clock-names = "i2cclk", "apb_pclk";
|
|
power-domains = <&pm_domains DOMAIN_VAPE>;
|
|
|
|
status = "disabled";
|
|
};
|
|
|
|
i2c3: i2c@80110000 {
|
|
compatible = "stericsson,db8500-i2c", "st,nomadik-i2c", "arm,primecell";
|
|
reg = <0x80110000 0x1000>;
|
|
interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
|
|
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
v-i2c-supply = <&db8500_vape_reg>;
|
|
|
|
clock-frequency = <400000>;
|
|
|
|
clocks = <&prcc_kclk 2 0>, <&prcc_pclk 2 0>;
|
|
clock-names = "i2cclk", "apb_pclk";
|
|
power-domains = <&pm_domains DOMAIN_VAPE>;
|
|
|
|
status = "disabled";
|
|
};
|
|
|
|
i2c4: i2c@8012a000 {
|
|
compatible = "stericsson,db8500-i2c", "st,nomadik-i2c", "arm,primecell";
|
|
reg = <0x8012a000 0x1000>;
|
|
interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>;
|
|
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
v-i2c-supply = <&db8500_vape_reg>;
|
|
|
|
clock-frequency = <400000>;
|
|
|
|
clocks = <&prcc_kclk 1 9>, <&prcc_pclk 1 10>;
|
|
clock-names = "i2cclk", "apb_pclk";
|
|
power-domains = <&pm_domains DOMAIN_VAPE>;
|
|
|
|
status = "disabled";
|
|
};
|
|
|
|
ssp0: spi@80002000 {
|
|
compatible = "arm,pl022", "arm,primecell";
|
|
reg = <0x80002000 0x1000>;
|
|
interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
clocks = <&prcc_kclk 3 1>, <&prcc_pclk 3 1>;
|
|
clock-names = "SSPCLK", "apb_pclk";
|
|
dmas = <&dma 8 0 0x2>, /* Logical - DevToMem */
|
|
<&dma 8 0 0x0>; /* Logical - MemToDev */
|
|
dma-names = "rx", "tx";
|
|
power-domains = <&pm_domains DOMAIN_VAPE>;
|
|
|
|
status = "disabled";
|
|
};
|
|
|
|
ssp1: spi@80003000 {
|
|
compatible = "arm,pl022", "arm,primecell";
|
|
reg = <0x80003000 0x1000>;
|
|
interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>;
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
clocks = <&prcc_kclk 3 2>, <&prcc_pclk 3 2>;
|
|
clock-names = "SSPCLK", "apb_pclk";
|
|
dmas = <&dma 9 0 0x2>, /* Logical - DevToMem */
|
|
<&dma 9 0 0x0>; /* Logical - MemToDev */
|
|
dma-names = "rx", "tx";
|
|
power-domains = <&pm_domains DOMAIN_VAPE>;
|
|
|
|
status = "disabled";
|
|
};
|
|
|
|
spi0: spi@8011a000 {
|
|
compatible = "arm,pl022", "arm,primecell";
|
|
reg = <0x8011a000 0x1000>;
|
|
interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
/* Same clock wired to kernel and pclk */
|
|
clocks = <&prcc_pclk 2 8>, <&prcc_pclk 2 8>;
|
|
clock-names = "SSPCLK", "apb_pclk";
|
|
dmas = <&dma 0 0 0x2>, /* Logical - DevToMem */
|
|
<&dma 0 0 0x0>; /* Logical - MemToDev */
|
|
dma-names = "rx", "tx";
|
|
power-domains = <&pm_domains DOMAIN_VAPE>;
|
|
|
|
status = "disabled";
|
|
};
|
|
|
|
spi1: spi@80112000 {
|
|
compatible = "arm,pl022", "arm,primecell";
|
|
reg = <0x80112000 0x1000>;
|
|
interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
/* Same clock wired to kernel and pclk */
|
|
clocks = <&prcc_pclk 2 2>, <&prcc_pclk 2 2>;
|
|
clock-names = "SSPCLK", "apb_pclk";
|
|
dmas = <&dma 35 0 0x2>, /* Logical - DevToMem */
|
|
<&dma 35 0 0x0>; /* Logical - MemToDev */
|
|
dma-names = "rx", "tx";
|
|
power-domains = <&pm_domains DOMAIN_VAPE>;
|
|
|
|
status = "disabled";
|
|
};
|
|
|
|
spi2: spi@80111000 {
|
|
compatible = "arm,pl022", "arm,primecell";
|
|
reg = <0x80111000 0x1000>;
|
|
interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
/* Same clock wired to kernel and pclk */
|
|
clocks = <&prcc_pclk 2 1>, <&prcc_pclk 2 1>;
|
|
clock-names = "SSPCLK", "apb_pclk";
|
|
dmas = <&dma 33 0 0x2>, /* Logical - DevToMem */
|
|
<&dma 33 0 0x0>; /* Logical - MemToDev */
|
|
dma-names = "rx", "tx";
|
|
power-domains = <&pm_domains DOMAIN_VAPE>;
|
|
|
|
status = "disabled";
|
|
};
|
|
|
|
spi3: spi@80129000 {
|
|
compatible = "arm,pl022", "arm,primecell";
|
|
reg = <0x80129000 0x1000>;
|
|
interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>;
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
/* Same clock wired to kernel and pclk */
|
|
clocks = <&prcc_pclk 1 7>, <&prcc_pclk 1 7>;
|
|
clock-names = "SSPCLK", "apb_pclk";
|
|
dmas = <&dma 40 0 0x2>, /* Logical - DevToMem */
|
|
<&dma 40 0 0x0>; /* Logical - MemToDev */
|
|
dma-names = "rx", "tx";
|
|
power-domains = <&pm_domains DOMAIN_VAPE>;
|
|
|
|
status = "disabled";
|
|
};
|
|
|
|
serial0: uart@80120000 {
|
|
compatible = "arm,pl011", "arm,primecell";
|
|
reg = <0x80120000 0x1000>;
|
|
interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
|
|
|
|
dmas = <&dma 13 0 0x2>, /* Logical - DevToMem */
|
|
<&dma 13 0 0x0>; /* Logical - MemToDev */
|
|
dma-names = "rx", "tx";
|
|
|
|
clocks = <&prcc_kclk 1 0>, <&prcc_pclk 1 0>;
|
|
clock-names = "uart", "apb_pclk";
|
|
|
|
status = "disabled";
|
|
};
|
|
|
|
serial1: uart@80121000 {
|
|
compatible = "arm,pl011", "arm,primecell";
|
|
reg = <0x80121000 0x1000>;
|
|
interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
|
|
|
|
dmas = <&dma 12 0 0x2>, /* Logical - DevToMem */
|
|
<&dma 12 0 0x0>; /* Logical - MemToDev */
|
|
dma-names = "rx", "tx";
|
|
|
|
clocks = <&prcc_kclk 1 1>, <&prcc_pclk 1 1>;
|
|
clock-names = "uart", "apb_pclk";
|
|
|
|
status = "disabled";
|
|
};
|
|
|
|
serial2: uart@80007000 {
|
|
compatible = "arm,pl011", "arm,primecell";
|
|
reg = <0x80007000 0x1000>;
|
|
interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
|
|
|
|
dmas = <&dma 11 0 0x2>, /* Logical - DevToMem */
|
|
<&dma 11 0 0x0>; /* Logical - MemToDev */
|
|
dma-names = "rx", "tx";
|
|
|
|
clocks = <&prcc_kclk 3 6>, <&prcc_pclk 3 6>;
|
|
clock-names = "uart", "apb_pclk";
|
|
|
|
status = "disabled";
|
|
};
|
|
|
|
sdi0_per1@80126000 {
|
|
compatible = "arm,pl18x", "arm,primecell";
|
|
reg = <0x80126000 0x1000>;
|
|
interrupts = <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>;
|
|
|
|
dmas = <&dma 29 0 0x2>, /* Logical - DevToMem */
|
|
<&dma 29 0 0x0>; /* Logical - MemToDev */
|
|
dma-names = "rx", "tx";
|
|
|
|
clocks = <&prcc_kclk 1 5>, <&prcc_pclk 1 5>;
|
|
clock-names = "sdi", "apb_pclk";
|
|
power-domains = <&pm_domains DOMAIN_VAPE>;
|
|
|
|
status = "disabled";
|
|
};
|
|
|
|
sdi1_per2@80118000 {
|
|
compatible = "arm,pl18x", "arm,primecell";
|
|
reg = <0x80118000 0x1000>;
|
|
interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>;
|
|
|
|
dmas = <&dma 32 0 0x2>, /* Logical - DevToMem */
|
|
<&dma 32 0 0x0>; /* Logical - MemToDev */
|
|
dma-names = "rx", "tx";
|
|
|
|
clocks = <&prcc_kclk 2 4>, <&prcc_pclk 2 6>;
|
|
clock-names = "sdi", "apb_pclk";
|
|
power-domains = <&pm_domains DOMAIN_VAPE>;
|
|
|
|
status = "disabled";
|
|
};
|
|
|
|
sdi2_per3@80005000 {
|
|
compatible = "arm,pl18x", "arm,primecell";
|
|
reg = <0x80005000 0x1000>;
|
|
interrupts = <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>;
|
|
|
|
dmas = <&dma 28 0 0x2>, /* Logical - DevToMem */
|
|
<&dma 28 0 0x0>; /* Logical - MemToDev */
|
|
dma-names = "rx", "tx";
|
|
|
|
clocks = <&prcc_kclk 3 4>, <&prcc_pclk 3 4>;
|
|
clock-names = "sdi", "apb_pclk";
|
|
power-domains = <&pm_domains DOMAIN_VAPE>;
|
|
|
|
status = "disabled";
|
|
};
|
|
|
|
sdi3_per2@80119000 {
|
|
compatible = "arm,pl18x", "arm,primecell";
|
|
reg = <0x80119000 0x1000>;
|
|
interrupts = <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>;
|
|
|
|
dmas = <&dma 41 0 0x2>, /* Logical - DevToMem */
|
|
<&dma 41 0 0x0>; /* Logical - MemToDev */
|
|
dma-names = "rx", "tx";
|
|
|
|
clocks = <&prcc_kclk 2 5>, <&prcc_pclk 2 7>;
|
|
clock-names = "sdi", "apb_pclk";
|
|
power-domains = <&pm_domains DOMAIN_VAPE>;
|
|
|
|
status = "disabled";
|
|
};
|
|
|
|
sdi4_per2@80114000 {
|
|
compatible = "arm,pl18x", "arm,primecell";
|
|
reg = <0x80114000 0x1000>;
|
|
interrupts = <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>;
|
|
|
|
dmas = <&dma 42 0 0x2>, /* Logical - DevToMem */
|
|
<&dma 42 0 0x0>; /* Logical - MemToDev */
|
|
dma-names = "rx", "tx";
|
|
|
|
clocks = <&prcc_kclk 2 2>, <&prcc_pclk 2 4>;
|
|
clock-names = "sdi", "apb_pclk";
|
|
power-domains = <&pm_domains DOMAIN_VAPE>;
|
|
|
|
status = "disabled";
|
|
};
|
|
|
|
sdi5_per3@80008000 {
|
|
compatible = "arm,pl18x", "arm,primecell";
|
|
reg = <0x80008000 0x1000>;
|
|
interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>;
|
|
|
|
dmas = <&dma 43 0 0x2>, /* Logical - DevToMem */
|
|
<&dma 43 0 0x0>; /* Logical - MemToDev */
|
|
dma-names = "rx", "tx";
|
|
|
|
clocks = <&prcc_kclk 3 7>, <&prcc_pclk 3 7>;
|
|
clock-names = "sdi", "apb_pclk";
|
|
power-domains = <&pm_domains DOMAIN_VAPE>;
|
|
|
|
status = "disabled";
|
|
};
|
|
|
|
sound {
|
|
compatible = "stericsson,snd-soc-mop500";
|
|
stericsson,cpu-dai = <&msp1 &msp3>;
|
|
};
|
|
|
|
msp0: msp@80123000 {
|
|
compatible = "stericsson,ux500-msp-i2s";
|
|
reg = <0x80123000 0x1000>;
|
|
interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
|
|
v-ape-supply = <&db8500_vape_reg>;
|
|
|
|
dmas = <&dma 31 0 0x12>, /* Logical - DevToMem - HighPrio */
|
|
<&dma 31 0 0x10>; /* Logical - MemToDev - HighPrio */
|
|
dma-names = "rx", "tx";
|
|
|
|
clocks = <&prcc_kclk 1 3>, <&prcc_pclk 1 3>;
|
|
clock-names = "msp", "apb_pclk";
|
|
|
|
status = "disabled";
|
|
};
|
|
|
|
msp1: msp@80124000 {
|
|
compatible = "stericsson,ux500-msp-i2s";
|
|
reg = <0x80124000 0x1000>;
|
|
interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>;
|
|
v-ape-supply = <&db8500_vape_reg>;
|
|
|
|
/* This DMA channel only exist on DB8500 v1 */
|
|
dmas = <&dma 30 0 0x10>; /* Logical - MemToDev - HighPrio */
|
|
dma-names = "tx";
|
|
|
|
clocks = <&prcc_kclk 1 4>, <&prcc_pclk 1 4>;
|
|
clock-names = "msp", "apb_pclk";
|
|
|
|
status = "disabled";
|
|
};
|
|
|
|
// HDMI sound
|
|
msp2: msp@80117000 {
|
|
compatible = "stericsson,ux500-msp-i2s";
|
|
reg = <0x80117000 0x1000>;
|
|
interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
|
|
v-ape-supply = <&db8500_vape_reg>;
|
|
|
|
dmas = <&dma 14 0 0x12>, /* Logical - DevToMem - HighPrio */
|
|
<&dma 14 1 0x19>; /* Physical Chan 1 - MemToDev
|
|
HighPrio - Fixed */
|
|
dma-names = "rx", "tx";
|
|
|
|
clocks = <&prcc_kclk 2 3>, <&prcc_pclk 2 5>;
|
|
clock-names = "msp", "apb_pclk";
|
|
|
|
status = "disabled";
|
|
};
|
|
|
|
msp3: msp@80125000 {
|
|
compatible = "stericsson,ux500-msp-i2s";
|
|
reg = <0x80125000 0x1000>;
|
|
interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>;
|
|
v-ape-supply = <&db8500_vape_reg>;
|
|
|
|
/* This DMA channel only exist on DB8500 v2 */
|
|
dmas = <&dma 30 0 0x12>; /* Logical - DevToMem - HighPrio */
|
|
dma-names = "rx";
|
|
|
|
clocks = <&prcc_kclk 1 10>, <&prcc_pclk 1 11>;
|
|
clock-names = "msp", "apb_pclk";
|
|
|
|
status = "disabled";
|
|
};
|
|
|
|
external-bus@50000000 {
|
|
compatible = "simple-bus";
|
|
reg = <0x50000000 0x4000000>;
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
ranges = <0 0x50000000 0x4000000>;
|
|
status = "disabled";
|
|
};
|
|
|
|
gpu@a0300000 {
|
|
/*
|
|
* This block is referred to as "Smart Graphics Adapter SGA500"
|
|
* in documentation but is in practice a pretty straight-forward
|
|
* MALI-400 GPU block.
|
|
*/
|
|
compatible = "stericsson,db8500-mali", "arm,mali-400";
|
|
reg = <0xa0300000 0x10000>;
|
|
interrupts = <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>;
|
|
interrupt-names = "gp",
|
|
"gpmmu",
|
|
"pp0",
|
|
"ppmmu0",
|
|
"combined";
|
|
clocks = <&prcmu_clk PRCMU_ACLK>, <&prcmu_clk PRCMU_SGACLK>;
|
|
clock-names = "bus", "core";
|
|
mali-supply = <&db8500_sga_reg>;
|
|
power-domains = <&pm_domains DOMAIN_VAPE>;
|
|
};
|
|
|
|
mcde@a0350000 {
|
|
compatible = "ste,mcde";
|
|
reg = <0xa0350000 0x1000>;
|
|
interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>;
|
|
epod-supply = <&db8500_b2r2_mcde_reg>;
|
|
clocks = <&prcmu_clk PRCMU_MCDECLK>, /* Main MCDE clock */
|
|
<&prcmu_clk PRCMU_LCDCLK>, /* LCD clock */
|
|
<&prcmu_clk PRCMU_PLLDSI>; /* HDMI clock */
|
|
clock-names = "mcde", "lcd", "hdmi";
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
ranges;
|
|
status = "disabled";
|
|
|
|
dsi0: dsi@a0351000 {
|
|
compatible = "ste,mcde-dsi";
|
|
reg = <0xa0351000 0x1000>;
|
|
clocks = <&prcmu_clk PRCMU_DSI0CLK>, <&prcmu_clk PRCMU_DSI0ESCCLK>;
|
|
clock-names = "hs", "lp";
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
};
|
|
dsi1: dsi@a0352000 {
|
|
compatible = "ste,mcde-dsi";
|
|
reg = <0xa0352000 0x1000>;
|
|
clocks = <&prcmu_clk PRCMU_DSI1CLK>, <&prcmu_clk PRCMU_DSI1ESCCLK>;
|
|
clock-names = "hs", "lp";
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
};
|
|
dsi2: dsi@a0353000 {
|
|
compatible = "ste,mcde-dsi";
|
|
reg = <0xa0353000 0x1000>;
|
|
/* This DSI port only has the Low Power / Energy Save clock */
|
|
clocks = <&prcmu_clk PRCMU_DSI2ESCCLK>;
|
|
clock-names = "lp";
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
};
|
|
};
|
|
|
|
cryp@a03cb000 {
|
|
compatible = "stericsson,ux500-cryp";
|
|
reg = <0xa03cb000 0x1000>;
|
|
interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>;
|
|
|
|
v-ape-supply = <&db8500_vape_reg>;
|
|
clocks = <&prcc_pclk 6 1>;
|
|
};
|
|
|
|
hash@a03c2000 {
|
|
compatible = "stericsson,ux500-hash";
|
|
reg = <0xa03c2000 0x1000>;
|
|
|
|
v-ape-supply = <&db8500_vape_reg>;
|
|
clocks = <&prcc_pclk 6 2>;
|
|
};
|
|
};
|
|
};
|