2
0
mirror of https://github.com/edk2-porting/linux-next.git synced 2024-12-23 12:43:55 +08:00
linux-next/drivers/power/reset/Kconfig
Robin Gong 3db47dc0ae power: reset: imx-snvs-poweroff: add power off driver for i.mx6
This driver register pm_power_off with snvs power off function. If
your boards NOT use PMIC_ON_REQ to turn on/off external pmic, or use
other pin to do, please disable the driver in dts, otherwise, your
pm_power_off maybe overwrote by this driver.

Signed-off-by: Robin Gong <b38343@freescale.com>
Acked-By: Sebastian Reichel <sre@kernel.org>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2014-11-23 14:57:11 +08:00

164 lines
4.3 KiB
Plaintext

menuconfig POWER_RESET
bool "Board level reset or power off"
help
Provides a number of drivers which either reset a complete board
or shut it down, by manipulating the main power supply on the board.
Say Y here to enable board reset and power off
if POWER_RESET
config POWER_RESET_AS3722
bool "ams AS3722 power-off driver"
depends on MFD_AS3722
help
This driver supports turning off board via a ams AS3722 power-off.
config POWER_RESET_AT91_POWEROFF
bool "Atmel AT91 poweroff driver"
depends on ARCH_AT91
default SOC_AT91SAM9 || SOC_SAMA5
help
This driver supports poweroff for Atmel AT91SAM9 and SAMA5
SoCs
config POWER_RESET_AT91_RESET
bool "Atmel AT91 reset driver"
depends on ARCH_AT91
default SOC_AT91SAM9 || SOC_SAMA5
help
This driver supports restart for Atmel AT91SAM9 and SAMA5
SoCs
config POWER_RESET_AXXIA
bool "LSI Axxia reset driver"
depends on ARCH_AXXIA
help
This driver supports restart for Axxia SoC.
Say Y if you have an Axxia family SoC.
config POWER_RESET_BRCMSTB
bool "Broadcom STB reset driver" if COMPILE_TEST
depends on ARM
default ARCH_BRCMSTB
help
This driver provides restart support for ARM-based Broadcom STB
boards.
Say Y here if you have an ARM-based Broadcom STB board and you wish
to have restart support.
config POWER_RESET_GPIO
bool "GPIO power-off driver"
depends on OF_GPIO
help
This driver supports turning off your board via a GPIO line.
If your board needs a GPIO high/low to power down, say Y and
create a binding in your devicetree.
config POWER_RESET_GPIO_RESTART
bool "GPIO restart driver"
depends on OF_GPIO
help
This driver supports restarting your board via a GPIO line.
If your board needs a GPIO high/low to restart, say Y and
create a binding in your devicetree.
config POWER_RESET_HISI
bool "Hisilicon power-off driver"
depends on ARCH_HISI
help
Reboot support for Hisilicon boards.
config POWER_RESET_IMX
bool "IMX6 power-off driver"
depends on POWER_RESET && SOC_IMX6
help
This driver support power off external PMIC by PMIC_ON_REQ on i.mx6
boards.If you want to use other pin to control external power,please
say N here or disable in dts to make sure pm_power_off never be
overwrote wrongly by this driver.
config POWER_RESET_MSM
bool "Qualcomm MSM power-off driver"
depends on ARCH_QCOM
help
Power off and restart support for Qualcomm boards.
config POWER_RESET_LTC2952
bool "LTC2952 PowerPath power-off driver"
depends on OF_GPIO
help
This driver supports an external powerdown trigger and board power
down via the LTC2952. Bindings are made in the device tree.
config POWER_RESET_QNAP
bool "QNAP power-off driver"
depends on OF_GPIO && PLAT_ORION
help
This driver supports turning off QNAP NAS devices by sending
commands to the microcontroller which controls the main power.
Say Y if you have a QNAP NAS.
config POWER_RESET_RESTART
bool "Restart power-off driver"
depends on ARM
help
Some boards don't actually have the ability to power off.
Instead they restart, and u-boot holds the SoC until the
user presses a key. u-boot then boots into Linux.
config POWER_RESET_SUN6I
bool "Allwinner A31 SoC reset driver"
depends on ARCH_SUNXI
help
Reboot support for the Allwinner A31 SoCs.
config POWER_RESET_ST
bool "ST restart power-off driver"
depends on ARCH_STI
help
Power off and reset support for STMicroelectronics boards.
config POWER_RESET_VERSATILE
bool "ARM Versatile family reboot driver"
depends on ARM
depends on MFD_SYSCON
depends on OF
help
Power off and restart support for ARM Versatile family of
reference boards.
config POWER_RESET_VEXPRESS
bool "ARM Versatile Express power-off and reset driver"
depends on ARM || ARM64
depends on VEXPRESS_CONFIG
help
Power off and reset support for the ARM Ltd. Versatile
Express boards.
config POWER_RESET_XGENE
bool "APM SoC X-Gene reset driver"
depends on ARM64
help
Reboot support for the APM SoC X-Gene Eval boards.
config POWER_RESET_KEYSTONE
bool "Keystone reset driver"
depends on ARCH_KEYSTONE
select MFD_SYSCON
help
Reboot support for the KEYSTONE SoCs.
config POWER_RESET_SYSCON
bool "Generic SYSCON regmap reset driver"
depends on OF
select MFD_SYSCON
help
Reboot support for generic SYSCON mapped register reset.
endif