renegade-project/linux-next
2
0
Fork 0
mirror of https://github.com/edk2-porting/linux-next.git synced 2024-12-22 20:23:57 +08:00
Code
29c7f1f53b
linux-next/drivers/pinctrl/pinctrl-falcon.c
Sherman Yin 03b054e969 pinctrl: Pass all configs to driver on pin_config_set() 
When setting pin configuration in the pinctrl framework, pin_config_set() or
pin_config_group_set() is called in a loop to set one configuration at a time
for the specified pin or group.

This patch 1) removes the loop and 2) changes the API to pass the whole pin
config array to the driver.  It is now up to the driver to loop through the
configs.  This allows the driver to potentially combine configs and reduce the
number of writes to pin config registers.

All c files changed have been build-tested to verify the change compiles and
that the corresponding .o is successfully generated.

Signed-off-by: Sherman Yin <syin@broadcom.com>
Reviewed-by: Christian Daudt <csd@broadcom.com>
Reviewed-by: Matt Porter <matt.porter@linaro.org>
Tested-by: Stephen Warren <swarren@nvidia.com>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-08-28 13:34:41 +02:00

514 lines
15 KiB
C
Raw Blame History

/*
* linux/drivers/pinctrl/pinmux-falcon.c
* based on linux/drivers/pinctrl/pinmux-pxa910.c
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License version 2 as published
* by the Free Software Foundation.
*
* Copyright (C) 2012 Thomas Langer <thomas.langer@lantiq.com>
* Copyright (C) 2012 John Crispin <blogic@openwrt.org>
*/
#include <linux/gpio.h>
#include <linux/interrupt.h>
#include <linux/slab.h>
#include <linux/export.h>
#include <linux/err.h>
#include <linux/module.h>
#include <linux/of.h>
#include <linux/of_platform.h>
#include <linux/of_address.h>
#include <linux/of_gpio.h>
#include <linux/platform_device.h>
#include "pinctrl-lantiq.h"
#include <lantiq_soc.h>
/* Multiplexer Control Register */
#define LTQ_PADC_MUX(x) (x * 0x4)
/* Pull Up Enable Register */
#define LTQ_PADC_PUEN 0x80
/* Pull Down Enable Register */
#define LTQ_PADC_PDEN 0x84
/* Slew Rate Control Register */
#define LTQ_PADC_SRC 0x88
/* Drive Current Control Register */
#define LTQ_PADC_DCC 0x8C
/* Pad Control Availability Register */
#define LTQ_PADC_AVAIL 0xF0
#define pad_r32(p, reg) ltq_r32(p + reg)
#define pad_w32(p, val, reg) ltq_w32(val, p + reg)
#define pad_w32_mask(c, clear, set, reg) \
pad_w32(c, (pad_r32(c, reg) & ~(clear)) | (set), reg)
#define pad_getbit(m, r, p) (!!(ltq_r32(m + r) & (1 << p)))
#define PORTS 5
#define PINS 32
#define PORT(x) (x / PINS)
#define PORT_PIN(x) (x % PINS)
#define MFP_FALCON(a, f0, f1, f2, f3) \
{ \
.name = #a, \
.pin = a, \
.func = { \
FALCON_MUX_##f0, \
FALCON_MUX_##f1, \
FALCON_MUX_##f2, \
FALCON_MUX_##f3, \
}, \
}
#define GRP_MUX(a, m, p) \
{ \
.name = a, \
.mux = FALCON_MUX_##m, \
.pins = p, \
.npins = ARRAY_SIZE(p), \
}
enum falcon_mux {
FALCON_MUX_GPIO = 0,
FALCON_MUX_RST,
FALCON_MUX_NTR,
FALCON_MUX_PPS,
FALCON_MUX_MDIO,
FALCON_MUX_LED,
FALCON_MUX_SPI,
FALCON_MUX_ASC,
FALCON_MUX_I2C,
FALCON_MUX_HOSTIF,
FALCON_MUX_SLIC,
FALCON_MUX_JTAG,
FALCON_MUX_PCM,
FALCON_MUX_MII,
FALCON_MUX_PHY,
FALCON_MUX_NONE = 0xffff,
};
static struct pinctrl_pin_desc falcon_pads[PORTS * PINS];
static int pad_count[PORTS];
static void lantiq_load_pin_desc(struct pinctrl_pin_desc *d, int bank, int len)
{
int base = bank * PINS;
int i;
for (i = 0; i < len; i++) {
/* strlen("ioXYZ") + 1 = 6 */
char *name = kzalloc(6, GFP_KERNEL);
snprintf(name, 6, "io%d", base + i);
d[i].number = base + i;
d[i].name = name;
}
pad_count[bank] = len;
}
static struct ltq_mfp_pin falcon_mfp[] = {
/* pin f0 f1 f2 f3 */
MFP_FALCON(GPIO0, RST, GPIO, NONE, NONE),
MFP_FALCON(GPIO1, GPIO, GPIO, NONE, NONE),
MFP_FALCON(GPIO2, GPIO, GPIO, NONE, NONE),
MFP_FALCON(GPIO3, GPIO, GPIO, NONE, NONE),
MFP_FALCON(GPIO4, NTR, GPIO, NONE, NONE),
MFP_FALCON(GPIO5, NTR, GPIO, PPS, NONE),
MFP_FALCON(GPIO6, RST, GPIO, NONE, NONE),
MFP_FALCON(GPIO7, MDIO, GPIO, NONE, NONE),
MFP_FALCON(GPIO8, MDIO, GPIO, NONE, NONE),
MFP_FALCON(GPIO9, LED, GPIO, NONE, NONE),
MFP_FALCON(GPIO10, LED, GPIO, NONE, NONE),
MFP_FALCON(GPIO11, LED, GPIO, NONE, NONE),
MFP_FALCON(GPIO12, LED, GPIO, NONE, NONE),
MFP_FALCON(GPIO13, LED, GPIO, NONE, NONE),
MFP_FALCON(GPIO14, LED, GPIO, NONE, NONE),
MFP_FALCON(GPIO32, ASC, GPIO, NONE, NONE),
MFP_FALCON(GPIO33, ASC, GPIO, NONE, NONE),
MFP_FALCON(GPIO34, SPI, GPIO, NONE, NONE),
MFP_FALCON(GPIO35, SPI, GPIO, NONE, NONE),
MFP_FALCON(GPIO36, SPI, GPIO, NONE, NONE),
MFP_FALCON(GPIO37, SPI, GPIO, NONE, NONE),
MFP_FALCON(GPIO38, SPI, GPIO, NONE, NONE),
MFP_FALCON(GPIO39, I2C, GPIO, NONE, NONE),
MFP_FALCON(GPIO40, I2C, GPIO, NONE, NONE),
MFP_FALCON(GPIO41, HOSTIF, GPIO, HOSTIF, JTAG),
MFP_FALCON(GPIO42, HOSTIF, GPIO, HOSTIF, NONE),
MFP_FALCON(GPIO43, SLIC, GPIO, NONE, NONE),
MFP_FALCON(GPIO44, SLIC, GPIO, PCM, ASC),
MFP_FALCON(GPIO45, SLIC, GPIO, PCM, ASC),
MFP_FALCON(GPIO64, MII, GPIO, NONE, NONE),
MFP_FALCON(GPIO65, MII, GPIO, NONE, NONE),
MFP_FALCON(GPIO66, MII, GPIO, NONE, NONE),
MFP_FALCON(GPIO67, MII, GPIO, NONE, NONE),
MFP_FALCON(GPIO68, MII, GPIO, NONE, NONE),
MFP_FALCON(GPIO69, MII, GPIO, NONE, NONE),
MFP_FALCON(GPIO70, MII, GPIO, NONE, NONE),
MFP_FALCON(GPIO71, MII, GPIO, NONE, NONE),
MFP_FALCON(GPIO72, MII, GPIO, NONE, NONE),
MFP_FALCON(GPIO73, MII, GPIO, NONE, NONE),
MFP_FALCON(GPIO74, MII, GPIO, NONE, NONE),
MFP_FALCON(GPIO75, MII, GPIO, NONE, NONE),
MFP_FALCON(GPIO76, MII, GPIO, NONE, NONE),
MFP_FALCON(GPIO77, MII, GPIO, NONE, NONE),
MFP_FALCON(GPIO78, MII, GPIO, NONE, NONE),
MFP_FALCON(GPIO79, MII, GPIO, NONE, NONE),
MFP_FALCON(GPIO80, MII, GPIO, NONE, NONE),
MFP_FALCON(GPIO81, MII, GPIO, NONE, NONE),
MFP_FALCON(GPIO82, MII, GPIO, NONE, NONE),
MFP_FALCON(GPIO83, MII, GPIO, NONE, NONE),
MFP_FALCON(GPIO84, MII, GPIO, NONE, NONE),
MFP_FALCON(GPIO85, MII, GPIO, NONE, NONE),
MFP_FALCON(GPIO86, MII, GPIO, NONE, NONE),
MFP_FALCON(GPIO87, MII, GPIO, NONE, NONE),
MFP_FALCON(GPIO88, PHY, GPIO, NONE, NONE),
};
static const unsigned pins_por[] = {GPIO0};
static const unsigned pins_ntr[] = {GPIO4};
static const unsigned pins_ntr8k[] = {GPIO5};
static const unsigned pins_pps[] = {GPIO5};
static const unsigned pins_hrst[] = {GPIO6};
static const unsigned pins_mdio[] = {GPIO7, GPIO8};
static const unsigned pins_bled[] = {GPIO9, GPIO10, GPIO11,
GPIO12, GPIO13, GPIO14};
static const unsigned pins_asc0[] = {GPIO32, GPIO33};
static const unsigned pins_spi[] = {GPIO34, GPIO35, GPIO36};
static const unsigned pins_spi_cs0[] = {GPIO37};
static const unsigned pins_spi_cs1[] = {GPIO38};
static const unsigned pins_i2c[] = {GPIO39, GPIO40};
static const unsigned pins_jtag[] = {GPIO41};
static const unsigned pins_slic[] = {GPIO43, GPIO44, GPIO45};
static const unsigned pins_pcm[] = {GPIO44, GPIO45};
static const unsigned pins_asc1[] = {GPIO44, GPIO45};
static struct ltq_pin_group falcon_grps[] = {
GRP_MUX("por", RST, pins_por),
GRP_MUX("ntr", NTR, pins_ntr),
GRP_MUX("ntr8k", NTR, pins_ntr8k),
GRP_MUX("pps", PPS, pins_pps),
GRP_MUX("hrst", RST, pins_hrst),
GRP_MUX("mdio", MDIO, pins_mdio),
GRP_MUX("bootled", LED, pins_bled),
GRP_MUX("asc0", ASC, pins_asc0),
GRP_MUX("spi", SPI, pins_spi),
GRP_MUX("spi cs0", SPI, pins_spi_cs0),
GRP_MUX("spi cs1", SPI, pins_spi_cs1),
GRP_MUX("i2c", I2C, pins_i2c),
GRP_MUX("jtag", JTAG, pins_jtag),
GRP_MUX("slic", SLIC, pins_slic),
GRP_MUX("pcm", PCM, pins_pcm),
GRP_MUX("asc1", ASC, pins_asc1),
};
static const char * const ltq_rst_grps[] = {"por", "hrst"};
static const char * const ltq_ntr_grps[] = {"ntr", "ntr8k", "pps"};
static const char * const ltq_mdio_grps[] = {"mdio"};
static const char * const ltq_bled_grps[] = {"bootled"};
static const char * const ltq_asc_grps[] = {"asc0", "asc1"};
static const char * const ltq_spi_grps[] = {"spi", "spi cs0", "spi cs1"};
static const char * const ltq_i2c_grps[] = {"i2c"};
static const char * const ltq_jtag_grps[] = {"jtag"};
static const char * const ltq_slic_grps[] = {"slic"};
static const char * const ltq_pcm_grps[] = {"pcm"};
static struct ltq_pmx_func falcon_funcs[] = {
{"rst", ARRAY_AND_SIZE(ltq_rst_grps)},
{"ntr", ARRAY_AND_SIZE(ltq_ntr_grps)},
{"mdio", ARRAY_AND_SIZE(ltq_mdio_grps)},
{"led", ARRAY_AND_SIZE(ltq_bled_grps)},
{"asc", ARRAY_AND_SIZE(ltq_asc_grps)},
{"spi", ARRAY_AND_SIZE(ltq_spi_grps)},
{"i2c", ARRAY_AND_SIZE(ltq_i2c_grps)},
{"jtag", ARRAY_AND_SIZE(ltq_jtag_grps)},
{"slic", ARRAY_AND_SIZE(ltq_slic_grps)},
{"pcm", ARRAY_AND_SIZE(ltq_pcm_grps)},
};
/* --------- pinconf related code --------- */
static int falcon_pinconf_group_get(struct pinctrl_dev *pctrldev,
unsigned group, unsigned long *config)
{
return -ENOTSUPP;
}
static int falcon_pinconf_group_set(struct pinctrl_dev *pctrldev,
unsigned group, unsigned long *configs,
unsigned num_configs)
{
return -ENOTSUPP;
}
static int falcon_pinconf_get(struct pinctrl_dev *pctrldev,
unsigned pin, unsigned long *config)
{
struct ltq_pinmux_info *info = pinctrl_dev_get_drvdata(pctrldev);
enum ltq_pinconf_param param = LTQ_PINCONF_UNPACK_PARAM(*config);
void __iomem *mem = info->membase[PORT(pin)];
switch (param) {
case LTQ_PINCONF_PARAM_DRIVE_CURRENT:
*config = LTQ_PINCONF_PACK(param,
!!pad_getbit(mem, LTQ_PADC_DCC, PORT_PIN(pin)));
break;
case LTQ_PINCONF_PARAM_SLEW_RATE:
*config = LTQ_PINCONF_PACK(param,
!!pad_getbit(mem, LTQ_PADC_SRC, PORT_PIN(pin)));
break;
case LTQ_PINCONF_PARAM_PULL:
if (pad_getbit(mem, LTQ_PADC_PDEN, PORT_PIN(pin)))
*config = LTQ_PINCONF_PACK(param, 1);
else if (pad_getbit(mem, LTQ_PADC_PUEN, PORT_PIN(pin)))
*config = LTQ_PINCONF_PACK(param, 2);
else
*config = LTQ_PINCONF_PACK(param, 0);
break;
default:
return -ENOTSUPP;
}
return 0;
}
static int falcon_pinconf_set(struct pinctrl_dev *pctrldev,
unsigned pin, unsigned long *configs,
unsigned num_configs)
{
enum ltq_pinconf_param param;
int arg;
struct ltq_pinmux_info *info = pinctrl_dev_get_drvdata(pctrldev);
void __iomem *mem = info->membase[PORT(pin)];
u32 reg;
int i;
for (i = 0; i < num_configs; i++) {
param = LTQ_PINCONF_UNPACK_PARAM(configs[i]);
arg = LTQ_PINCONF_UNPACK_ARG(configs[i]);
switch (param) {
case LTQ_PINCONF_PARAM_DRIVE_CURRENT:
reg = LTQ_PADC_DCC;
break;
case LTQ_PINCONF_PARAM_SLEW_RATE:
reg = LTQ_PADC_SRC;
break;
case LTQ_PINCONF_PARAM_PULL:
if (arg == 1)
reg = LTQ_PADC_PDEN;
else
reg = LTQ_PADC_PUEN;
break;
default:
pr_err("%s: Invalid config param %04x\n",
pinctrl_dev_get_name(pctrldev), param);
return -ENOTSUPP;
}
pad_w32(mem, BIT(PORT_PIN(pin)), reg);
if (!(pad_r32(mem, reg) & BIT(PORT_PIN(pin))))
return -ENOTSUPP;
} /* for each config */
return 0;
}
static void falcon_pinconf_dbg_show(struct pinctrl_dev *pctrldev,
struct seq_file *s, unsigned offset)
{
unsigned long config;
struct pin_desc *desc;
struct ltq_pinmux_info *info = pinctrl_dev_get_drvdata(pctrldev);
int port = PORT(offset);
seq_printf(s, " (port %d) mux %d -- ", port,
pad_r32(info->membase[port], LTQ_PADC_MUX(PORT_PIN(offset))));
config = LTQ_PINCONF_PACK(LTQ_PINCONF_PARAM_PULL, 0);
if (!falcon_pinconf_get(pctrldev, offset, &config))
seq_printf(s, "pull %d ",
(int)LTQ_PINCONF_UNPACK_ARG(config));
config = LTQ_PINCONF_PACK(LTQ_PINCONF_PARAM_DRIVE_CURRENT, 0);
if (!falcon_pinconf_get(pctrldev, offset, &config))
seq_printf(s, "drive-current %d ",
(int)LTQ_PINCONF_UNPACK_ARG(config));
config = LTQ_PINCONF_PACK(LTQ_PINCONF_PARAM_SLEW_RATE, 0);
if (!falcon_pinconf_get(pctrldev, offset, &config))
seq_printf(s, "slew-rate %d ",
(int)LTQ_PINCONF_UNPACK_ARG(config));
desc = pin_desc_get(pctrldev, offset);
if (desc) {
if (desc->gpio_owner)
seq_printf(s, " owner: %s", desc->gpio_owner);
} else {
seq_printf(s, " not registered");
}
}
static void falcon_pinconf_group_dbg_show(struct pinctrl_dev *pctrldev,
struct seq_file *s, unsigned selector)
{
}
static const struct pinconf_ops falcon_pinconf_ops = {
.pin_config_get = falcon_pinconf_get,
.pin_config_set = falcon_pinconf_set,
.pin_config_group_get = falcon_pinconf_group_get,
.pin_config_group_set = falcon_pinconf_group_set,
.pin_config_dbg_show = falcon_pinconf_dbg_show,
.pin_config_group_dbg_show = falcon_pinconf_group_dbg_show,
};
static struct pinctrl_desc falcon_pctrl_desc = {
.owner = THIS_MODULE,
.pins = falcon_pads,
.confops = &falcon_pinconf_ops,
};
static inline int falcon_mux_apply(struct pinctrl_dev *pctrldev,
int mfp, int mux)
{
struct ltq_pinmux_info *info = pinctrl_dev_get_drvdata(pctrldev);
int port = PORT(info->mfp[mfp].pin);
if ((port >= PORTS) || (!info->membase[port]))
return -ENODEV;
pad_w32(info->membase[port], mux,
LTQ_PADC_MUX(PORT_PIN(info->mfp[mfp].pin)));
return 0;
}
static const struct ltq_cfg_param falcon_cfg_params[] = {
{"lantiq,pull", LTQ_PINCONF_PARAM_PULL},
{"lantiq,drive-current", LTQ_PINCONF_PARAM_DRIVE_CURRENT},
{"lantiq,slew-rate", LTQ_PINCONF_PARAM_SLEW_RATE},
};
static struct ltq_pinmux_info falcon_info = {
.desc = &falcon_pctrl_desc,
.apply_mux = falcon_mux_apply,
.params = falcon_cfg_params,
.num_params = ARRAY_SIZE(falcon_cfg_params),
};
/* --------- register the pinctrl layer --------- */
int pinctrl_falcon_get_range_size(int id)
{
u32 avail;
if ((id >= PORTS) || (!falcon_info.membase[id]))
return -EINVAL;
avail = pad_r32(falcon_info.membase[id], LTQ_PADC_AVAIL);
return fls(avail);
}
void pinctrl_falcon_add_gpio_range(struct pinctrl_gpio_range *range)
{
pinctrl_add_gpio_range(falcon_info.pctrl, range);
}
static int pinctrl_falcon_probe(struct platform_device *pdev)
{
struct device_node *np;
int pad_count = 0;
int ret = 0;
/* load and remap the pad resources of the different banks */
for_each_compatible_node(np, NULL, "lantiq,pad-falcon") {
struct platform_device *ppdev = of_find_device_by_node(np);
const __be32 *bank = of_get_property(np, "lantiq,bank", NULL);
struct resource res;
u32 avail;
int pins;
if (!of_device_is_available(np))
continue;
if (!ppdev) {
dev_err(&pdev->dev, "failed to find pad pdev\n");
continue;
}
if (!bank || *bank >= PORTS)
continue;
if (of_address_to_resource(np, 0, &res))
continue;
falcon_info.clk[*bank] = clk_get(&ppdev->dev, NULL);
if (IS_ERR(falcon_info.clk[*bank])) {
dev_err(&ppdev->dev, "failed to get clock\n");
return PTR_ERR(falcon_info.clk[*bank]);
}
falcon_info.membase[*bank] = devm_ioremap_resource(&pdev->dev,
&res);
if (IS_ERR(falcon_info.membase[*bank]))
return PTR_ERR(falcon_info.membase[*bank]);
avail = pad_r32(falcon_info.membase[*bank],
LTQ_PADC_AVAIL);
pins = fls(avail);
lantiq_load_pin_desc(&falcon_pads[pad_count], *bank, pins);
pad_count += pins;
clk_enable(falcon_info.clk[*bank]);
dev_dbg(&pdev->dev, "found %s with %d pads\n",
res.name, pins);
}
dev_dbg(&pdev->dev, "found a total of %d pads\n", pad_count);
falcon_pctrl_desc.name = dev_name(&pdev->dev);
falcon_pctrl_desc.npins = pad_count;
falcon_info.mfp = falcon_mfp;
falcon_info.num_mfp = ARRAY_SIZE(falcon_mfp);
falcon_info.grps = falcon_grps;
falcon_info.num_grps = ARRAY_SIZE(falcon_grps);
falcon_info.funcs = falcon_funcs;
falcon_info.num_funcs = ARRAY_SIZE(falcon_funcs);
ret = ltq_pinctrl_register(pdev, &falcon_info);
if (!ret)
dev_info(&pdev->dev, "Init done\n");
return ret;
}
static const struct of_device_id falcon_match[] = {
{ .compatible = "lantiq,pinctrl-falcon" },
{},
};
MODULE_DEVICE_TABLE(of, falcon_match);
static struct platform_driver pinctrl_falcon_driver = {
.probe = pinctrl_falcon_probe,
.driver = {
.name = "pinctrl-falcon",
.owner = THIS_MODULE,
.of_match_table = falcon_match,
},
};
int __init pinctrl_falcon_init(void)
{
return platform_driver_register(&pinctrl_falcon_driver);
}
core_initcall_sync(pinctrl_falcon_init);
View Git Blame Copy Permalink