mirror of
https://github.com/edk2-porting/linux-next.git
synced 2024-12-23 12:43:55 +08:00
7ca1d488ff
RTC class suspend/resume support, re-initializing the system clock on resume from the clock used to initialize it at boot time. - The reinit-on-resume is hooked to the existing RTC_HCTOSYS config option, on the grounds that a clock good enough for init must also be good enough for re-init. - Inlining a version of the code used by ARM, to save and restore the delta between a selected RTC and the current system wall-clock time. - Removes calls to that ARM code from AT91, OMAP1, and S3C RTCs. This means that systems using those RTCs across suspend/resume will likely want to change their kernel configs to enable RTC_HCTOSYS. If HCTOSYS isn't using a second RTC (with battery?), this changes the system's initial date from Jan 1970 to the epoch this hardware uses: 1998 for AT91, 2000 for OMAP1 (assuming no split power mode), etc. This goes on top of the patch series removing "struct class_device" usage from the RTC framework. That's all needed for class suspend()/resume(). Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Acked-by: Greg Kroah-Hartman <gregkh@suse.de> Acked-By: Alessandro Zummo <a.zummo@towertech.it> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
598 lines
14 KiB
C
598 lines
14 KiB
C
/* drivers/rtc/rtc-s3c.c
|
|
*
|
|
* Copyright (c) 2004,2006 Simtec Electronics
|
|
* Ben Dooks, <ben@simtec.co.uk>
|
|
* http://armlinux.simtec.co.uk/
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License version 2 as
|
|
* published by the Free Software Foundation.
|
|
*
|
|
* S3C2410/S3C2440/S3C24XX Internal RTC Driver
|
|
*/
|
|
|
|
#include <linux/module.h>
|
|
#include <linux/fs.h>
|
|
#include <linux/string.h>
|
|
#include <linux/init.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/rtc.h>
|
|
#include <linux/bcd.h>
|
|
#include <linux/clk.h>
|
|
|
|
#include <asm/hardware.h>
|
|
#include <asm/uaccess.h>
|
|
#include <asm/io.h>
|
|
#include <asm/irq.h>
|
|
#include <asm/rtc.h>
|
|
|
|
#include <asm/mach/time.h>
|
|
|
|
#include <asm/arch/regs-rtc.h>
|
|
|
|
/* I have yet to find an S3C implementation with more than one
|
|
* of these rtc blocks in */
|
|
|
|
static struct resource *s3c_rtc_mem;
|
|
|
|
static void __iomem *s3c_rtc_base;
|
|
static int s3c_rtc_alarmno = NO_IRQ;
|
|
static int s3c_rtc_tickno = NO_IRQ;
|
|
static int s3c_rtc_freq = 1;
|
|
|
|
static DEFINE_SPINLOCK(s3c_rtc_pie_lock);
|
|
static unsigned int tick_count;
|
|
|
|
/* IRQ Handlers */
|
|
|
|
static irqreturn_t s3c_rtc_alarmirq(int irq, void *id)
|
|
{
|
|
struct rtc_device *rdev = id;
|
|
|
|
rtc_update_irq(rdev, 1, RTC_AF | RTC_IRQF);
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
static irqreturn_t s3c_rtc_tickirq(int irq, void *id)
|
|
{
|
|
struct rtc_device *rdev = id;
|
|
|
|
rtc_update_irq(rdev, tick_count++, RTC_PF | RTC_IRQF);
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
/* Update control registers */
|
|
static void s3c_rtc_setaie(int to)
|
|
{
|
|
unsigned int tmp;
|
|
|
|
pr_debug("%s: aie=%d\n", __FUNCTION__, to);
|
|
|
|
tmp = readb(s3c_rtc_base + S3C2410_RTCALM) & ~S3C2410_RTCALM_ALMEN;
|
|
|
|
if (to)
|
|
tmp |= S3C2410_RTCALM_ALMEN;
|
|
|
|
writeb(tmp, s3c_rtc_base + S3C2410_RTCALM);
|
|
}
|
|
|
|
static void s3c_rtc_setpie(int to)
|
|
{
|
|
unsigned int tmp;
|
|
|
|
pr_debug("%s: pie=%d\n", __FUNCTION__, to);
|
|
|
|
spin_lock_irq(&s3c_rtc_pie_lock);
|
|
tmp = readb(s3c_rtc_base + S3C2410_TICNT) & ~S3C2410_TICNT_ENABLE;
|
|
|
|
if (to)
|
|
tmp |= S3C2410_TICNT_ENABLE;
|
|
|
|
writeb(tmp, s3c_rtc_base + S3C2410_TICNT);
|
|
spin_unlock_irq(&s3c_rtc_pie_lock);
|
|
}
|
|
|
|
static void s3c_rtc_setfreq(int freq)
|
|
{
|
|
unsigned int tmp;
|
|
|
|
spin_lock_irq(&s3c_rtc_pie_lock);
|
|
tmp = readb(s3c_rtc_base + S3C2410_TICNT) & S3C2410_TICNT_ENABLE;
|
|
|
|
s3c_rtc_freq = freq;
|
|
|
|
tmp |= (128 / freq)-1;
|
|
|
|
writeb(tmp, s3c_rtc_base + S3C2410_TICNT);
|
|
spin_unlock_irq(&s3c_rtc_pie_lock);
|
|
}
|
|
|
|
/* Time read/write */
|
|
|
|
static int s3c_rtc_gettime(struct device *dev, struct rtc_time *rtc_tm)
|
|
{
|
|
unsigned int have_retried = 0;
|
|
void __iomem *base = s3c_rtc_base;
|
|
|
|
retry_get_time:
|
|
rtc_tm->tm_min = readb(base + S3C2410_RTCMIN);
|
|
rtc_tm->tm_hour = readb(base + S3C2410_RTCHOUR);
|
|
rtc_tm->tm_mday = readb(base + S3C2410_RTCDATE);
|
|
rtc_tm->tm_mon = readb(base + S3C2410_RTCMON);
|
|
rtc_tm->tm_year = readb(base + S3C2410_RTCYEAR);
|
|
rtc_tm->tm_sec = readb(base + S3C2410_RTCSEC);
|
|
|
|
/* the only way to work out wether the system was mid-update
|
|
* when we read it is to check the second counter, and if it
|
|
* is zero, then we re-try the entire read
|
|
*/
|
|
|
|
if (rtc_tm->tm_sec == 0 && !have_retried) {
|
|
have_retried = 1;
|
|
goto retry_get_time;
|
|
}
|
|
|
|
pr_debug("read time %02x.%02x.%02x %02x/%02x/%02x\n",
|
|
rtc_tm->tm_year, rtc_tm->tm_mon, rtc_tm->tm_mday,
|
|
rtc_tm->tm_hour, rtc_tm->tm_min, rtc_tm->tm_sec);
|
|
|
|
BCD_TO_BIN(rtc_tm->tm_sec);
|
|
BCD_TO_BIN(rtc_tm->tm_min);
|
|
BCD_TO_BIN(rtc_tm->tm_hour);
|
|
BCD_TO_BIN(rtc_tm->tm_mday);
|
|
BCD_TO_BIN(rtc_tm->tm_mon);
|
|
BCD_TO_BIN(rtc_tm->tm_year);
|
|
|
|
rtc_tm->tm_year += 100;
|
|
rtc_tm->tm_mon -= 1;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int s3c_rtc_settime(struct device *dev, struct rtc_time *tm)
|
|
{
|
|
void __iomem *base = s3c_rtc_base;
|
|
int year = tm->tm_year - 100;
|
|
|
|
pr_debug("set time %02d.%02d.%02d %02d/%02d/%02d\n",
|
|
tm->tm_year, tm->tm_mon, tm->tm_mday,
|
|
tm->tm_hour, tm->tm_min, tm->tm_sec);
|
|
|
|
/* we get around y2k by simply not supporting it */
|
|
|
|
if (year < 0 || year >= 100) {
|
|
dev_err(dev, "rtc only supports 100 years\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
writeb(BIN2BCD(tm->tm_sec), base + S3C2410_RTCSEC);
|
|
writeb(BIN2BCD(tm->tm_min), base + S3C2410_RTCMIN);
|
|
writeb(BIN2BCD(tm->tm_hour), base + S3C2410_RTCHOUR);
|
|
writeb(BIN2BCD(tm->tm_mday), base + S3C2410_RTCDATE);
|
|
writeb(BIN2BCD(tm->tm_mon + 1), base + S3C2410_RTCMON);
|
|
writeb(BIN2BCD(year), base + S3C2410_RTCYEAR);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int s3c_rtc_getalarm(struct device *dev, struct rtc_wkalrm *alrm)
|
|
{
|
|
struct rtc_time *alm_tm = &alrm->time;
|
|
void __iomem *base = s3c_rtc_base;
|
|
unsigned int alm_en;
|
|
|
|
alm_tm->tm_sec = readb(base + S3C2410_ALMSEC);
|
|
alm_tm->tm_min = readb(base + S3C2410_ALMMIN);
|
|
alm_tm->tm_hour = readb(base + S3C2410_ALMHOUR);
|
|
alm_tm->tm_mon = readb(base + S3C2410_ALMMON);
|
|
alm_tm->tm_mday = readb(base + S3C2410_ALMDATE);
|
|
alm_tm->tm_year = readb(base + S3C2410_ALMYEAR);
|
|
|
|
alm_en = readb(base + S3C2410_RTCALM);
|
|
|
|
alrm->enabled = (alm_en & S3C2410_RTCALM_ALMEN) ? 1 : 0;
|
|
|
|
pr_debug("read alarm %02x %02x.%02x.%02x %02x/%02x/%02x\n",
|
|
alm_en,
|
|
alm_tm->tm_year, alm_tm->tm_mon, alm_tm->tm_mday,
|
|
alm_tm->tm_hour, alm_tm->tm_min, alm_tm->tm_sec);
|
|
|
|
|
|
/* decode the alarm enable field */
|
|
|
|
if (alm_en & S3C2410_RTCALM_SECEN)
|
|
BCD_TO_BIN(alm_tm->tm_sec);
|
|
else
|
|
alm_tm->tm_sec = 0xff;
|
|
|
|
if (alm_en & S3C2410_RTCALM_MINEN)
|
|
BCD_TO_BIN(alm_tm->tm_min);
|
|
else
|
|
alm_tm->tm_min = 0xff;
|
|
|
|
if (alm_en & S3C2410_RTCALM_HOUREN)
|
|
BCD_TO_BIN(alm_tm->tm_hour);
|
|
else
|
|
alm_tm->tm_hour = 0xff;
|
|
|
|
if (alm_en & S3C2410_RTCALM_DAYEN)
|
|
BCD_TO_BIN(alm_tm->tm_mday);
|
|
else
|
|
alm_tm->tm_mday = 0xff;
|
|
|
|
if (alm_en & S3C2410_RTCALM_MONEN) {
|
|
BCD_TO_BIN(alm_tm->tm_mon);
|
|
alm_tm->tm_mon -= 1;
|
|
} else {
|
|
alm_tm->tm_mon = 0xff;
|
|
}
|
|
|
|
if (alm_en & S3C2410_RTCALM_YEAREN)
|
|
BCD_TO_BIN(alm_tm->tm_year);
|
|
else
|
|
alm_tm->tm_year = 0xffff;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int s3c_rtc_setalarm(struct device *dev, struct rtc_wkalrm *alrm)
|
|
{
|
|
struct rtc_time *tm = &alrm->time;
|
|
void __iomem *base = s3c_rtc_base;
|
|
unsigned int alrm_en;
|
|
|
|
pr_debug("s3c_rtc_setalarm: %d, %02x/%02x/%02x %02x.%02x.%02x\n",
|
|
alrm->enabled,
|
|
tm->tm_mday & 0xff, tm->tm_mon & 0xff, tm->tm_year & 0xff,
|
|
tm->tm_hour & 0xff, tm->tm_min & 0xff, tm->tm_sec);
|
|
|
|
|
|
alrm_en = readb(base + S3C2410_RTCALM) & S3C2410_RTCALM_ALMEN;
|
|
writeb(0x00, base + S3C2410_RTCALM);
|
|
|
|
if (tm->tm_sec < 60 && tm->tm_sec >= 0) {
|
|
alrm_en |= S3C2410_RTCALM_SECEN;
|
|
writeb(BIN2BCD(tm->tm_sec), base + S3C2410_ALMSEC);
|
|
}
|
|
|
|
if (tm->tm_min < 60 && tm->tm_min >= 0) {
|
|
alrm_en |= S3C2410_RTCALM_MINEN;
|
|
writeb(BIN2BCD(tm->tm_min), base + S3C2410_ALMMIN);
|
|
}
|
|
|
|
if (tm->tm_hour < 24 && tm->tm_hour >= 0) {
|
|
alrm_en |= S3C2410_RTCALM_HOUREN;
|
|
writeb(BIN2BCD(tm->tm_hour), base + S3C2410_ALMHOUR);
|
|
}
|
|
|
|
pr_debug("setting S3C2410_RTCALM to %08x\n", alrm_en);
|
|
|
|
writeb(alrm_en, base + S3C2410_RTCALM);
|
|
|
|
if (0) {
|
|
alrm_en = readb(base + S3C2410_RTCALM);
|
|
alrm_en &= ~S3C2410_RTCALM_ALMEN;
|
|
writeb(alrm_en, base + S3C2410_RTCALM);
|
|
disable_irq_wake(s3c_rtc_alarmno);
|
|
}
|
|
|
|
if (alrm->enabled)
|
|
enable_irq_wake(s3c_rtc_alarmno);
|
|
else
|
|
disable_irq_wake(s3c_rtc_alarmno);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int s3c_rtc_ioctl(struct device *dev,
|
|
unsigned int cmd, unsigned long arg)
|
|
{
|
|
unsigned int ret = -ENOIOCTLCMD;
|
|
|
|
switch (cmd) {
|
|
case RTC_AIE_OFF:
|
|
case RTC_AIE_ON:
|
|
s3c_rtc_setaie((cmd == RTC_AIE_ON) ? 1 : 0);
|
|
ret = 0;
|
|
break;
|
|
|
|
case RTC_PIE_OFF:
|
|
case RTC_PIE_ON:
|
|
tick_count = 0;
|
|
s3c_rtc_setpie((cmd == RTC_PIE_ON) ? 1 : 0);
|
|
ret = 0;
|
|
break;
|
|
|
|
case RTC_IRQP_READ:
|
|
ret = put_user(s3c_rtc_freq, (unsigned long __user *)arg);
|
|
break;
|
|
|
|
case RTC_IRQP_SET:
|
|
/* check for power of 2 */
|
|
|
|
if ((arg & (arg-1)) != 0 || arg < 1) {
|
|
ret = -EINVAL;
|
|
goto exit;
|
|
}
|
|
|
|
pr_debug("s3c2410_rtc: setting frequency %ld\n", arg);
|
|
|
|
s3c_rtc_setfreq(arg);
|
|
ret = 0;
|
|
break;
|
|
|
|
case RTC_UIE_ON:
|
|
case RTC_UIE_OFF:
|
|
ret = -EINVAL;
|
|
}
|
|
|
|
exit:
|
|
return ret;
|
|
}
|
|
|
|
static int s3c_rtc_proc(struct device *dev, struct seq_file *seq)
|
|
{
|
|
unsigned int ticnt = readb(s3c_rtc_base + S3C2410_TICNT);
|
|
|
|
seq_printf(seq, "periodic_IRQ\t: %s\n",
|
|
(ticnt & S3C2410_TICNT_ENABLE) ? "yes" : "no" );
|
|
|
|
seq_printf(seq, "periodic_freq\t: %d\n", s3c_rtc_freq);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int s3c_rtc_open(struct device *dev)
|
|
{
|
|
struct platform_device *pdev = to_platform_device(dev);
|
|
struct rtc_device *rtc_dev = platform_get_drvdata(pdev);
|
|
int ret;
|
|
|
|
ret = request_irq(s3c_rtc_alarmno, s3c_rtc_alarmirq,
|
|
IRQF_DISABLED, "s3c2410-rtc alarm", rtc_dev);
|
|
|
|
if (ret) {
|
|
dev_err(dev, "IRQ%d error %d\n", s3c_rtc_alarmno, ret);
|
|
return ret;
|
|
}
|
|
|
|
ret = request_irq(s3c_rtc_tickno, s3c_rtc_tickirq,
|
|
IRQF_DISABLED, "s3c2410-rtc tick", rtc_dev);
|
|
|
|
if (ret) {
|
|
dev_err(dev, "IRQ%d error %d\n", s3c_rtc_tickno, ret);
|
|
goto tick_err;
|
|
}
|
|
|
|
return ret;
|
|
|
|
tick_err:
|
|
free_irq(s3c_rtc_alarmno, rtc_dev);
|
|
return ret;
|
|
}
|
|
|
|
static void s3c_rtc_release(struct device *dev)
|
|
{
|
|
struct platform_device *pdev = to_platform_device(dev);
|
|
struct rtc_device *rtc_dev = platform_get_drvdata(pdev);
|
|
|
|
/* do not clear AIE here, it may be needed for wake */
|
|
|
|
s3c_rtc_setpie(0);
|
|
free_irq(s3c_rtc_alarmno, rtc_dev);
|
|
free_irq(s3c_rtc_tickno, rtc_dev);
|
|
}
|
|
|
|
static const struct rtc_class_ops s3c_rtcops = {
|
|
.open = s3c_rtc_open,
|
|
.release = s3c_rtc_release,
|
|
.ioctl = s3c_rtc_ioctl,
|
|
.read_time = s3c_rtc_gettime,
|
|
.set_time = s3c_rtc_settime,
|
|
.read_alarm = s3c_rtc_getalarm,
|
|
.set_alarm = s3c_rtc_setalarm,
|
|
.proc = s3c_rtc_proc,
|
|
};
|
|
|
|
static void s3c_rtc_enable(struct platform_device *pdev, int en)
|
|
{
|
|
void __iomem *base = s3c_rtc_base;
|
|
unsigned int tmp;
|
|
|
|
if (s3c_rtc_base == NULL)
|
|
return;
|
|
|
|
if (!en) {
|
|
tmp = readb(base + S3C2410_RTCCON);
|
|
writeb(tmp & ~S3C2410_RTCCON_RTCEN, base + S3C2410_RTCCON);
|
|
|
|
tmp = readb(base + S3C2410_TICNT);
|
|
writeb(tmp & ~S3C2410_TICNT_ENABLE, base + S3C2410_TICNT);
|
|
} else {
|
|
/* re-enable the device, and check it is ok */
|
|
|
|
if ((readb(base+S3C2410_RTCCON) & S3C2410_RTCCON_RTCEN) == 0){
|
|
dev_info(&pdev->dev, "rtc disabled, re-enabling\n");
|
|
|
|
tmp = readb(base + S3C2410_RTCCON);
|
|
writeb(tmp|S3C2410_RTCCON_RTCEN, base+S3C2410_RTCCON);
|
|
}
|
|
|
|
if ((readb(base + S3C2410_RTCCON) & S3C2410_RTCCON_CNTSEL)){
|
|
dev_info(&pdev->dev, "removing RTCCON_CNTSEL\n");
|
|
|
|
tmp = readb(base + S3C2410_RTCCON);
|
|
writeb(tmp& ~S3C2410_RTCCON_CNTSEL, base+S3C2410_RTCCON);
|
|
}
|
|
|
|
if ((readb(base + S3C2410_RTCCON) & S3C2410_RTCCON_CLKRST)){
|
|
dev_info(&pdev->dev, "removing RTCCON_CLKRST\n");
|
|
|
|
tmp = readb(base + S3C2410_RTCCON);
|
|
writeb(tmp & ~S3C2410_RTCCON_CLKRST, base+S3C2410_RTCCON);
|
|
}
|
|
}
|
|
}
|
|
|
|
static int s3c_rtc_remove(struct platform_device *dev)
|
|
{
|
|
struct rtc_device *rtc = platform_get_drvdata(dev);
|
|
|
|
platform_set_drvdata(dev, NULL);
|
|
rtc_device_unregister(rtc);
|
|
|
|
s3c_rtc_setpie(0);
|
|
s3c_rtc_setaie(0);
|
|
|
|
iounmap(s3c_rtc_base);
|
|
release_resource(s3c_rtc_mem);
|
|
kfree(s3c_rtc_mem);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int s3c_rtc_probe(struct platform_device *pdev)
|
|
{
|
|
struct rtc_device *rtc;
|
|
struct resource *res;
|
|
int ret;
|
|
|
|
pr_debug("%s: probe=%p\n", __FUNCTION__, pdev);
|
|
|
|
/* find the IRQs */
|
|
|
|
s3c_rtc_tickno = platform_get_irq(pdev, 1);
|
|
if (s3c_rtc_tickno < 0) {
|
|
dev_err(&pdev->dev, "no irq for rtc tick\n");
|
|
return -ENOENT;
|
|
}
|
|
|
|
s3c_rtc_alarmno = platform_get_irq(pdev, 0);
|
|
if (s3c_rtc_alarmno < 0) {
|
|
dev_err(&pdev->dev, "no irq for alarm\n");
|
|
return -ENOENT;
|
|
}
|
|
|
|
pr_debug("s3c2410_rtc: tick irq %d, alarm irq %d\n",
|
|
s3c_rtc_tickno, s3c_rtc_alarmno);
|
|
|
|
/* get the memory region */
|
|
|
|
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
|
|
if (res == NULL) {
|
|
dev_err(&pdev->dev, "failed to get memory region resource\n");
|
|
return -ENOENT;
|
|
}
|
|
|
|
s3c_rtc_mem = request_mem_region(res->start,
|
|
res->end-res->start+1,
|
|
pdev->name);
|
|
|
|
if (s3c_rtc_mem == NULL) {
|
|
dev_err(&pdev->dev, "failed to reserve memory region\n");
|
|
ret = -ENOENT;
|
|
goto err_nores;
|
|
}
|
|
|
|
s3c_rtc_base = ioremap(res->start, res->end - res->start + 1);
|
|
if (s3c_rtc_base == NULL) {
|
|
dev_err(&pdev->dev, "failed ioremap()\n");
|
|
ret = -EINVAL;
|
|
goto err_nomap;
|
|
}
|
|
|
|
/* check to see if everything is setup correctly */
|
|
|
|
s3c_rtc_enable(pdev, 1);
|
|
|
|
pr_debug("s3c2410_rtc: RTCCON=%02x\n",
|
|
readb(s3c_rtc_base + S3C2410_RTCCON));
|
|
|
|
s3c_rtc_setfreq(s3c_rtc_freq);
|
|
|
|
/* register RTC and exit */
|
|
|
|
rtc = rtc_device_register("s3c", &pdev->dev, &s3c_rtcops,
|
|
THIS_MODULE);
|
|
|
|
if (IS_ERR(rtc)) {
|
|
dev_err(&pdev->dev, "cannot attach rtc\n");
|
|
ret = PTR_ERR(rtc);
|
|
goto err_nortc;
|
|
}
|
|
|
|
rtc->max_user_freq = 128;
|
|
|
|
platform_set_drvdata(pdev, rtc);
|
|
return 0;
|
|
|
|
err_nortc:
|
|
s3c_rtc_enable(pdev, 0);
|
|
iounmap(s3c_rtc_base);
|
|
|
|
err_nomap:
|
|
release_resource(s3c_rtc_mem);
|
|
|
|
err_nores:
|
|
return ret;
|
|
}
|
|
|
|
#ifdef CONFIG_PM
|
|
|
|
/* RTC Power management control */
|
|
|
|
static struct timespec s3c_rtc_delta;
|
|
|
|
static int ticnt_save;
|
|
|
|
static int s3c_rtc_suspend(struct platform_device *pdev, pm_message_t state)
|
|
{
|
|
/* save TICNT for anyone using periodic interrupts */
|
|
ticnt_save = readb(s3c_rtc_base + S3C2410_TICNT);
|
|
s3c_rtc_enable(pdev, 0);
|
|
return 0;
|
|
}
|
|
|
|
static int s3c_rtc_resume(struct platform_device *pdev)
|
|
{
|
|
s3c_rtc_enable(pdev, 1);
|
|
writeb(ticnt_save, s3c_rtc_base + S3C2410_TICNT);
|
|
return 0;
|
|
}
|
|
#else
|
|
#define s3c_rtc_suspend NULL
|
|
#define s3c_rtc_resume NULL
|
|
#endif
|
|
|
|
static struct platform_driver s3c2410_rtcdrv = {
|
|
.probe = s3c_rtc_probe,
|
|
.remove = s3c_rtc_remove,
|
|
.suspend = s3c_rtc_suspend,
|
|
.resume = s3c_rtc_resume,
|
|
.driver = {
|
|
.name = "s3c2410-rtc",
|
|
.owner = THIS_MODULE,
|
|
},
|
|
};
|
|
|
|
static char __initdata banner[] = "S3C24XX RTC, (c) 2004,2006 Simtec Electronics\n";
|
|
|
|
static int __init s3c_rtc_init(void)
|
|
{
|
|
printk(banner);
|
|
return platform_driver_register(&s3c2410_rtcdrv);
|
|
}
|
|
|
|
static void __exit s3c_rtc_exit(void)
|
|
{
|
|
platform_driver_unregister(&s3c2410_rtcdrv);
|
|
}
|
|
|
|
module_init(s3c_rtc_init);
|
|
module_exit(s3c_rtc_exit);
|
|
|
|
MODULE_DESCRIPTION("Samsung S3C RTC Driver");
|
|
MODULE_AUTHOR("Ben Dooks <ben@simtec.co.uk>");
|
|
MODULE_LICENSE("GPL");
|