2
0
mirror of https://github.com/edk2-porting/linux-next.git synced 2024-12-29 07:34:06 +08:00
linux-next/include
Greg Kroah-Hartman 277c8e8b81 Second set of new device support, features and cleanup for IIO in the 5.1 cycle.
There are a few late breaking fixes in here that weren't worth trying to
 rush into 5.0 as they have been with us for quite a while.
 
 New device support
 * ad7476
   - add support for TI ADS786X parts that are compatible with this Analog
     Devices driver. Good to see some simple devices are so similar.
 * Ingenic jz47xx SoC ADCs
   - new driver and bindings
 * Plantower PMS7003 partical sensor
   - new driver and bindings including vendor prefix.
 * TI DAC7612
   - new driver and bindings for this dual DAC.
 
 New features
 * ad7768-1
   - Sampling frequency control
 * bmi160
   - Data ready trigger support, including open-drain dt binding.
 
 Cleanup / minor fixes.
 * Analog Device DACs
   - Fix some inconsistent licenses.  These are only ones where there were
     two different license marked in the same file, and hence were previously
     unclear.
 * ads124s08
   - Spelling fix.
 * adxl345
   - Parameter alignement tidy up.
 * bmi160
   - SPDX
   - correct a note on the types of supported interrupts which was too strict.
   - use iio_pollfunc_store_time to grab an earlier timestamp.
   - use if (ret) instead of if (ret < 0) to be consistent whilst simplifying
     some handling where ret was effectively getting written to 0 even though
     it was always already 0.
 * exynos_adc
   - Fix a null pointer dereference on unbind.
   - Fix number of channels on Exynos4x12 devices to be 4 rather than 8.
 * lpc32xx-adc
   - Move DT bindings doc out of staging. Oops, I missed this one when
     moving the driver.
   - SPDX.
 * npcm-adc
   - drop documentation of reset node as going to be done differently.
     It's a new driver this cycle so no need to support the previous
     binding going forwards.
 * sps30
   - Fix an issue with a loop timeout test that meant it would never identify
     a timeout.
   - Mark deliberate switch fall throughs.
 -----BEGIN PGP SIGNATURE-----
 
 iQJFBAABCAAvFiEEbilms4eEBlKRJoGxVIU0mcT0FogFAlxjNmgRHGppYzIzQGtl
 cm5lbC5vcmcACgkQVIU0mcT0FogooQ/9HDDuw4hrYJqH2cdUtKV29+a+kvMtrC1i
 X9+VstbMQNLo4DM3lYKi4VOeh6P5htRrD9ZJ4I2lh6PfnABjr3lb1AequlxwWNQZ
 9EHEY3BA0G33757LQEkqxl7h8Cqvo2y6Wl6OcUund0jP+h3F3EYkI4XWNcq5Yht4
 uWTkyTRYVZqFnlXGvfPz+53tEZ6p5RijbhOdYcL8R/0yWYzZzgzut7eYZn8Qn+mR
 LzSCBoEyAOUELYyRoczY2EkEO+u8H7lcU43i5TPPKji/c+w4OXu2ktuGVucXaHBs
 E1NLp0psLdqR2ef8fNYTs3FO2kxI7jV5qMlR91Sa2lDRyPhYeMF+JYBQlpqm5H2U
 xp8WwFrfT4KZ1yvioNeW+aNlPOd6ljDMg1z/iLWpAcUqx65QArmogL64m/Fc5GQD
 jrYzw68FO6fqKh3ik7VdPKIUS0p3Dz8BdWOqvI68+C/Mr/TgML51frf1NVbdd36L
 qgzMN6N53bykwN2w51O0Af4U3ZednN7BDDFkUbucutoglU+K8yRjFj583wM8QYsG
 GOZ3sPVZm+ItWCGc7nTJowe6+EQNgo/md3IEmmZNPrfWPHoMEebqnNcOuqcYvIlj
 wXgsJBNlWyQp5bqE9LmgClwAaWkXIoUvjUHt0cK5043ueLrYaGJ698sg0N/UO0JC
 T0/PJEMjLPE=
 =Se+F
 -----END PGP SIGNATURE-----

Merge tag 'iio-for-5.1b' of git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-next

Jonathan writes:

Second set of new device support, features and cleanup for IIO in the 5.1 cycle.

There are a few late breaking fixes in here that weren't worth trying to
rush into 5.0 as they have been with us for quite a while.

New device support
* ad7476
  - add support for TI ADS786X parts that are compatible with this Analog
    Devices driver. Good to see some simple devices are so similar.
* Ingenic jz47xx SoC ADCs
  - new driver and bindings
* Plantower PMS7003 partical sensor
  - new driver and bindings including vendor prefix.
* TI DAC7612
  - new driver and bindings for this dual DAC.

New features
* ad7768-1
  - Sampling frequency control
* bmi160
  - Data ready trigger support, including open-drain dt binding.

Cleanup / minor fixes.
* Analog Device DACs
  - Fix some inconsistent licenses.  These are only ones where there were
    two different license marked in the same file, and hence were previously
    unclear.
* ads124s08
  - Spelling fix.
* adxl345
  - Parameter alignement tidy up.
* bmi160
  - SPDX
  - correct a note on the types of supported interrupts which was too strict.
  - use iio_pollfunc_store_time to grab an earlier timestamp.
  - use if (ret) instead of if (ret < 0) to be consistent whilst simplifying
    some handling where ret was effectively getting written to 0 even though
    it was always already 0.
* exynos_adc
  - Fix a null pointer dereference on unbind.
  - Fix number of channels on Exynos4x12 devices to be 4 rather than 8.
* lpc32xx-adc
  - Move DT bindings doc out of staging. Oops, I missed this one when
    moving the driver.
  - SPDX.
* npcm-adc
  - drop documentation of reset node as going to be done differently.
    It's a new driver this cycle so no need to support the previous
    binding going forwards.
* sps30
  - Fix an issue with a loop timeout test that meant it would never identify
    a timeout.
  - Mark deliberate switch fall throughs.

* tag 'iio-for-5.1b' of git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio: (26 commits)
  iio: adc: exynos-adc: Use proper number of channels for Exynos4x12
  dt-binding: iio: remove rst node from NPCM ADC document
  dt-bindings: iio: chemical: pms7003: add device tree support
  dt-bindings: add Plantower to the vendor prefixes
  iio: chemical: add support for Plantower PMS7003 sensor
  iio:chemical:sps30 Supress some switch fallthrough warnings.
  iio:adc:lpc32xx use SPDX-License-Identifier
  dt-bindings: iio: adc: move lpc32xx-adc out of staging
  iio: adc: ads124s08: fix spelling mistake "converions" -> "conversions"
  iio: adc: exynos-adc: Fix NULL pointer exception on unbind
  iio: chemical: sps30: fix a loop timeout test
  iio:accel:adxl345: Change alignment to match paranthesis
  iio:dac:dac7612: device tree bindings
  iio:dac:ti-dac7612: Add driver for Texas Instruments DAC7612
  iio: adc: ad7476: Add support for TI ADS786X ADCs
  iio: adc: ad7768-1: Add support for setting the sampling frequency
  drivers: iio: dac: Fix wrong license for ADI drivers
  IIO: add Ingenic JZ47xx ADC driver.
  dt-bindings: iio/adc: Add bindings for Ingenic JZ47xx SoCs ADC.
  dt-bindings: iio/adc: Add docs for Ingenic JZ47xx SoCs ADC.
  ...
2019-02-13 08:24:50 +01:00
..
acpi Merge branch 'x86-cleanups-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip 2018-12-26 17:03:51 -08:00
asm-generic Merge branch 'akpm' (patches from Andrew) 2019-01-05 09:16:18 -08:00
clocksource
crypto crypto: skcipher - remove remnants of internal IV generators 2018-12-23 11:52:45 +08:00
drm Merge tag 'drm-intel-fixes-2019-01-11' of git://anongit.freedesktop.org/drm/drm-intel into drm-fixes 2019-01-11 10:26:21 +01:00
dt-bindings Second set of new device support, features and cleanup for IIO in the 5.1 cycle. 2019-02-13 08:24:50 +01:00
keys
kvm KVM: arm/arm64: Remove arch timer workqueue 2018-12-19 17:47:07 +00:00
linux Merge 5.0-rc6 into staging-next 2019-02-11 09:25:01 +01:00
math-emu
media media fixes for v4.20-rc8 2018-12-25 13:11:30 -08:00
memory
misc
net netfilter: nf_tables: unbind set in rule from commit path 2019-02-04 17:29:17 +01:00
pcmcia
ras
rdma RDMA/device: Expose ib_device_try_get(() 2019-01-21 14:33:08 -07:00
scsi 4.21 merge window pull request 2018-12-28 14:57:10 -08:00
soc ARM: SoC driver updates 2018-12-31 17:32:35 -08:00
sound ALSA: compress: Fix stop handling on compressed capture streams 2019-02-05 22:01:41 +01:00
target
trace afs: Fix race in async call refcounting 2019-01-17 15:17:28 +00:00
uapi Merge 5.0-rc6 into staging-next 2019-02-11 09:25:01 +01:00
video drm/exynos: fimd: Make pixel blend mode configurable 2018-12-14 15:46:15 +09:00
xen arm64/xen: fix xen-swiotlb cache flushing 2019-01-23 22:14:56 +01:00