Fabrice Gasnier 2763ea0585 iio: adc: stm32: add optional dma support ... Add DMA optional support to STM32 ADC, as there is a limited number DMA channels (request lines) that can be assigned to ADC. This way, driver may fall back using interrupts when all DMA channels are in use for other IPs. Use dma cyclic mode with two periods. Allow to tune period length by using watermark. Coherent memory is used for dma (max buffer size is fixed to PAGE_SIZE). Signed-off-by: Fabrice Gasnier <fabrice.gasnier@st.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>		2017-01-29 12:49:17 +00:00
..
accel	iio: common: ssp_sensors: accel: use devm_iio_device_register()	2017-01-28 12:15:22 +00:00
adc	iio: adc: stm32: add optional dma support	2017-01-29 12:49:17 +00:00
amplifiers	spi: Updates for v4.4	2015-11-05 13:15:12 -08:00
buffer	iio:buffer.h - split into buffer.h and buffer_impl.h	2017-01-10 19:54:55 +00:00
chemical	iio:chemical:atlas-ph-sensor: Fix use of 32 bit int to hold 16 bit big endian value	2016-10-23 22:18:27 +01:00
common	First round of new device support, features and cleanups for IIO in the 4.11 cycle.	2017-01-19 10:40:44 +01:00
counter	iio: 104-quad-8: Fix active level mismatch for the preset enable option	2016-12-03 10:08:09 +00:00
dac	iio: dac: ad5593r: Add ACPI support	2016-12-30 17:20:14 +00:00
dummy	iio:dummy: Stop enabling timestamp by default.	2017-01-10 19:54:55 +00:00
frequency	iio: frequency: ad9523: use unsigned int rather then bare unsigned	2016-04-17 10:31:03 +01:00
gyro	iio: common: ssp_sensors: gyro: use devm_iio_device_register()	2017-01-28 12:16:17 +00:00
health	iio: health: max30100: use msleep() for long uncritical delays	2017-01-22 13:21:28 +00:00
humidity	iio: humidity: Support acpi probe for hts211	2016-12-03 08:56:28 +00:00
imu	iio: imu: st_lsm6dsx: add possibility to select drdy pin	2017-01-28 12:41:53 +00:00
light	Second round of IIO new device support, cleanups and features for the 4.11 cycle	2017-01-23 09:23:23 +01:00
magnetometer	iio: magnetometer: mag3110: claim direct mode during raw writes	2017-01-21 12:20:40 +00:00
orientation	iio: orientation: hid-sensor-rotation: Add PM function (fix non working driver)	2016-11-05 17:47:47 +00:00
potentiometer	iio: max5481: Add support for Maxim digital potentiometers	2017-01-28 12:13:31 +00:00
potentiostat	iio: potentiostat: add LMP91000 support	2016-09-27 20:33:03 +01:00
pressure	iio: cros_ec: Add cros_ec barometer driver	2017-01-28 15:07:46 +00:00
proximity	iio: distance: srf08: add IIO driver for us ranger	2017-01-28 16:38:24 +00:00
temperature	iio:temperature: Add support for TI TMP007 sensor	2017-01-14 10:45:05 +00:00
trigger	Immutable branch between MFD, IIO and PWM due for the v4.11 merge window	2017-01-28 18:21:49 +00:00
iio_core_trigger.h
iio_core.h	iio:core: timestamping clock selection support	2016-06-30 19:41:38 +01:00
industrialio-buffer.c	iio:buffer.h - split into buffer.h and buffer_impl.h	2017-01-10 19:54:55 +00:00
industrialio-configfs.c	iio:configfs: Introduce iio/configfs.h to provide a location for the configfs_subsystem	2015-12-05 16:25:30 +00:00
industrialio-core.c	iio:buffer.h - split into buffer.h and buffer_impl.h	2017-01-10 19:54:55 +00:00
industrialio-event.c	iio: iio_push_event(): Don't crash if the event interface is not registered	2016-09-10 16:40:44 +01:00
industrialio-sw-device.c	iio: Add support for creating IIO devices via configfs	2016-05-04 11:43:54 +01:00
industrialio-sw-trigger.c	iio: core: fix ptr_ret.cocci warnings	2016-01-20 17:09:18 -08:00
industrialio-trigger.c	iio: trigger: clean up viio_trigger_alloc()	2017-01-22 13:37:34 +00:00
industrialio-triggered-event.c	iio: Support triggered events	2015-08-27 20:47:09 +01:00
inkern.c	iio: inkern: pass through raw values if no scaling	2017-01-14 12:20:18 +00:00
Kconfig	iio: 104-quad-8: Add IIO support for the ACCES 104-QUAD-8	2016-10-01 17:06:21 +01:00
Makefile	iio: 104-quad-8: Add IIO support for the ACCES 104-QUAD-8	2016-10-01 17:06:21 +01:00