renegade-project/linux-next
2
0
Fork 0
mirror of https://github.com/edk2-porting/linux-next.git synced 2024-12-26 06:04:14 +08:00
Code
2543133381
linux-next/arch/powerpc/boot
History
Grant Likely 2543133381 [POWERPC] bootwrapper: Build multiple cuImages 
Currently, the kernel uses CONFIG_DEVICE_TREE to wrap a kernel image
with a fdt blob which means for any given configuration only one dts
file can be selected and so support for only one board can be built

This moves the selection of the default .dts file out of the kernel
config and into the bootwrapper makefile.  The makefile chooses which
images to build based on the kernel config and the dts source file
name is taken directly from the image name.  For example "cuImage.ebony"
will use "ebony.dts" as the device tree source file.

In addition, this patch allows a specific image to be requested from the
command line by adding "cuImage.%" and "treeImage.%" targets to the list
of valid built targets in arch/powerpc/Makefile.  This allows the default
dts selection to be overridden.

Another advantage to this change is it allows a single defconfig to be
supplied for all boards using the same chip family and only differing in
the device tree.

Important note: This patch adds two new zImage targets; zImage.dtb.% and
zImage.dtb.initrd.% for zImages with embedded dtb files.  Currently
there are 5 platforms which require this: ps3, ep405, mpc885ads, ep88xc,
adder875-redboot and ep8248e.  This patch *changes the zImage filenames*
for those platforms.  ie. 'zImage.ps3' is now 'zImage.dtb.ps3'.

This new zImage.dtb targets were added so that the .dts file could be
part of the dependancies list for building them.

Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-02-07 11:40:19 +11:00
..
dtc-src [POWERPC] Update .gitignore files 2008-01-17 14:57:09 +11:00
dts Merge branch 'for-2.6.25' of git://git.secretlab.ca/git/linux-2.6-mpc52xx into for-2.6.25 2008-02-07 11:21:09 +11:00
libfdt [POWERPC] Merge libfdt upstream source 2007-12-11 13:46:13 +11:00
.gitignore [POWERPC] 8xx: Analogue & Micro Adder875 board support. 2008-01-23 19:34:40 -06:00
4xx.c [POWERPC] 4xx: logical/bitand typo in powerpc/boot/4xx.c 2008-01-25 07:13:39 -06:00
4xx.h [POWERPC] 4xx: Add 405GPr and 405EP support in boot wrapper 2008-01-08 07:58:09 -06:00
44x.h [POWERPC] cuimage for Bamboo board 2007-09-19 21:13:16 -05:00
addnote.c powerpc: Move ppc64 boot wrapper code over to arch/powerpc 2005-11-16 13:52:21 +11:00
addRamDisk.c powerpc: Move ppc64 boot wrapper code over to arch/powerpc 2005-11-16 13:52:21 +11:00
bamboo.c [POWERPC] 4xx: Rework clock probing in boot wrapper 2007-12-23 13:14:48 -06:00
cpm-serial.c [POWERPC] cpm: Describe multi-user ram in its own device node. 2007-10-04 15:47:05 -05:00
crt0.S [POWERPC] Fix building of COFF zImages 2007-06-07 22:21:31 +10:00
cuboot-8xx.c [POWERPC] Use embedded libfdt in the bootwrapper 2007-12-11 13:46:14 +11:00
cuboot-52xx.c [POWERPC] Use embedded libfdt in the bootwrapper 2007-12-11 13:46:14 +11:00
cuboot-83xx.c [POWERPC] bootwrapper: convert cuboot-8{3,5}xx to dt_fixup_mac_address_by_alias 2008-01-23 19:32:47 -06:00
cuboot-85xx-cpm2.c [POWERPC] Add a cuboot wrapper for 85xx with CPM2 2008-01-27 14:10:36 -06:00
cuboot-85xx.c [POWERPC] bootwrapper: convert cuboot-8{3,5}xx to dt_fixup_mac_address_by_alias 2008-01-23 19:32:47 -06:00
cuboot-824x.c [POWERPC] Add initial iomega StorCenter board port. 2008-01-23 19:54:36 -06:00
cuboot-bamboo.c [POWERPC] cuimage for Bamboo board 2007-09-19 21:13:16 -05:00
cuboot-ebony.c [POWERPC] Consolidate cuboot initialization code 2007-06-14 22:30:16 +10:00
cuboot-katmai.c [POWERPC] 4xx: Base support for 440SPe "Katmai" eval board 2007-12-23 13:14:57 -06:00
cuboot-mpc7448hpc2.c [POWERPC] bootwrapper: Build multiple cuImages 2008-02-07 11:40:19 +11:00
cuboot-pq2.c [POWERPC] Use embedded libfdt in the bootwrapper 2007-12-11 13:46:14 +11:00
cuboot-rainier.c [POWERPC] 4xx: libfdt and pci fixes for Rainier 2007-12-23 13:28:40 -06:00
cuboot-sequoia.c [POWERPC] 44x: Sequoia and Rainier updates for 2.6.25 2007-12-23 13:27:58 -06:00
cuboot-taishan.c [POWERPC] 4xx: Rework clock probing in boot wrapper 2007-12-23 13:14:48 -06:00
cuboot-warp.c [POWERPC] 4xx: PIKA Warp bootwrapper 2008-01-25 07:12:35 -06:00
cuboot.c [POWERPC] bootwrapper: Move linker symbols into ops.h 2007-08-22 15:27:28 +10:00
cuboot.h [POWERPC] Consolidate cuboot initialization code 2007-06-14 22:30:16 +10:00
dcr.h [POWERPC] 4xx: Add 405GPr and 405EP support in boot wrapper 2008-01-08 07:58:09 -06:00
devtree.c [POWERPC] bootwrapper: Add find_node_by_alias and dt_fixup_mac_address_by_alias 2008-01-23 19:32:44 -06:00
div64.S powerpc: Move ppc64 boot wrapper code over to arch/powerpc 2005-11-16 13:52:21 +11:00
dummy.c powerpc/32: Generate miboot images with ARCH=powerpc 2006-01-15 13:00:08 +11:00
ebony.c [POWERPC] 4xx: Rework clock probing in boot wrapper 2007-12-23 13:14:48 -06:00
elf_util.c [POWERPC] Move bootwrapper ELF parsing routines to a file 2007-04-13 03:55:16 +10:00
elf.h [POWERPC] Move bootwrapper ELF parsing routines to a file 2007-04-13 03:55:16 +10:00
ep88xc.c [POWERPC] Use embedded libfdt in the bootwrapper 2007-12-11 13:46:14 +11:00
ep405.c [POWERPC] 4xx: EP405 boards support for arch/powerpc 2007-12-23 13:13:14 -06:00
ep8248e.c [POWERPC] 82xx: Embedded Planet EP8248E support 2008-01-23 19:34:43 -06:00
fixed-head.S [POWERPC] 8xx/wrapper: Embedded Planet EP88xC support 2007-10-04 11:02:40 -05:00
flatdevtree_env.h Fix file references in documentation and Kconfig 2008-01-22 10:43:36 -08:00
fsl-soc.c [POWERPC] bootwrapper: Add fsl_get_immr() and 8xx/pq2 clock functions. 2007-10-03 20:36:35 -05:00
fsl-soc.h [POWERPC] bootwrapper: Add fsl_get_immr() and 8xx/pq2 clock functions. 2007-10-03 20:36:35 -05:00
gunzip_util.c [POWERPC] boot: Simplify gunzip_finish 2007-10-03 11:48:43 +10:00
gunzip_util.h [POWERPC] Add documentation for the zImage's gunzip convenience functions 2007-03-16 16:38:19 +11:00
hack-coff.c powerpc: Make COFF zImages for old 32-bit powermacs 2006-01-14 15:04:06 +11:00
holly.c [POWERPC] Use embedded libfdt in the bootwrapper 2007-12-11 13:46:14 +11:00
install.sh [PATCH] powerpc: trivial: modify comments to refer to new location of files 2006-02-10 16:53:51 +11:00
io.h [POWERPC] bootwrapper: Add 16-bit I/O, sync(), eieio(), and barrier() 2007-08-22 15:21:48 +10:00
libfdt_env.h [POWERPC] Use embedded libfdt in the bootwrapper 2007-12-11 13:46:14 +11:00
libfdt-wrapper.c [POWERPC] bootwrapper: Add find_node_by_compatible 2008-01-27 14:07:37 -06:00
main.c [POWERPC] Kill flatdevtree.c 2007-12-11 13:46:15 +11:00
Makefile [POWERPC] bootwrapper: Build multiple cuImages 2008-02-07 11:40:19 +11:00
mktree.c [POWERPC] Support for the Ebony 440GP reference board in arch/powerpc 2007-05-08 14:47:32 +10:00
mpc8xx.c [POWERPC] bootwrapper: Add fsl_get_immr() and 8xx/pq2 clock functions. 2007-10-03 20:36:35 -05:00
mpc8xx.h [POWERPC] bootwrapper: Add fsl_get_immr() and 8xx/pq2 clock functions. 2007-10-03 20:36:35 -05:00
mpc52xx-psc.c [POWERPC] mpc5200: Add cuimage support for mpc5200 boards 2007-09-22 14:49:22 +10:00
mpsc.c [POWERPC] bootwrapper: Declare udelay() in ops.h 2007-08-22 15:21:49 +10:00
mv64x60_i2c.c [POWERPC] bootwrapper: Declare udelay() in ops.h 2007-08-22 15:21:49 +10:00
mv64x60.c [POWERPC] Add bootwrapper support for Marvell/mv64x60 hostbridge 2007-05-12 11:32:49 +10:00
mv64x60.h [POWERPC] Add bootwrapper support for Marvell/mv64x60 hostbridge 2007-05-12 11:32:49 +10:00
ns16550.c [POWERPC] bootwrapper: Add dt_xlate_reg(), and use it to find serial registers. 2007-04-13 03:55:15 +10:00
of.c [POWERPC] bootwrapper: Move linker symbols into ops.h 2007-08-22 15:27:28 +10:00
of.h [POWERPC] Make more OF-related bootwrapper functions available to non-OF platforms 2007-06-28 19:19:28 +10:00
ofconsole.c [POWERPC] Make more OF-related bootwrapper functions available to non-OF platforms 2007-06-28 19:19:28 +10:00
oflib.c [POWERPC] Make more OF-related bootwrapper functions available to non-OF platforms 2007-06-28 19:19:28 +10:00
ops.h [POWERPC] bootwrapper: Add find_node_by_compatible 2008-01-27 14:07:37 -06:00
page.h powerpc: Move ppc64 boot wrapper code over to arch/powerpc 2005-11-16 13:52:21 +11:00
planetcore.c [POWERPC] bootwrapper: Add PlanetCore firmware support 2007-10-03 11:48:43 +10:00
planetcore.h [POWERPC] bootwrapper: Add PlanetCore firmware support 2007-10-03 11:48:43 +10:00
ppc_asm.h powerpc: Move ppc64 boot wrapper code over to arch/powerpc 2005-11-16 13:52:21 +11:00
ppcboot.h [POWERPC] bootwrapper: Add TARGET_HAS_ETHn tests to ppcboot.h 2007-08-22 15:21:48 +10:00
pq2.c [POWERPC] bootwrapper: Add fsl_get_immr() and 8xx/pq2 clock functions. 2007-10-03 20:36:35 -05:00
pq2.h [POWERPC] bootwrapper: Add fsl_get_immr() and 8xx/pq2 clock functions. 2007-10-03 20:36:35 -05:00
prpmc2800.c [POWERPC] Use embedded libfdt in the bootwrapper 2007-12-11 13:46:14 +11:00
ps3-head.S PS3: Fix build with 32-bit toolchains 2007-07-21 17:49:16 -07:00
ps3-hvcall.S PS3: Fix build with 32-bit toolchains 2007-07-21 17:49:16 -07:00
ps3.c [POWERPC] Use embedded libfdt in the bootwrapper 2007-12-11 13:46:14 +11:00
README powerpc: Move ppc64 boot wrapper code over to arch/powerpc 2005-11-16 13:52:21 +11:00
redboot-8xx.c [POWERPC] 8xx: Analogue & Micro Adder875 board support. 2008-01-23 19:34:40 -06:00
redboot.h [POWERPC] 8xx: Analogue & Micro Adder875 board support. 2008-01-23 19:34:40 -06:00
reg.h [POWERPC] 4xx: Add mfspr/mtspr inline macros to 4xx bootwrapper 2007-12-23 13:14:22 -06:00
rs6000.h powerpc: Make COFF zImages for old 32-bit powermacs 2006-01-14 15:04:06 +11:00
serial.c [POWERPC] mpc5200: make dts files conform to generic names recommended practice 2008-01-26 15:32:11 -07:00
simple_alloc.c [POWERPC] bootwrapper: Use `unsigned long' for malloc sizes 2007-04-24 22:06:54 +10:00
stdio.c [POWERPC] Add u64 printf to bootwrapper 2007-06-28 19:16:48 +10:00
stdio.h [POWERPC] Add gcc format warnings to zImage printf() 2007-03-26 15:11:20 +10:00
stdlib.c [POWERPC] bootwrapper: Add strtoull() 2007-09-14 01:33:23 +10:00
stdlib.h [POWERPC] bootwrapper: Add strtoull() 2007-09-14 01:33:23 +10:00
string.h [POWERPC] Add memchr() to the bootwrapper 2007-10-12 14:13:44 +10:00
string.S [POWERPC] Add memchr() to the bootwrapper 2007-10-12 14:13:44 +10:00
treeboot-bamboo.c [POWERPC] cuimage for Bamboo board 2007-09-19 21:13:16 -05:00
treeboot-ebony.c [POWERPC] bootwrapper: Move linker symbols into ops.h 2007-08-22 15:27:28 +10:00
treeboot-walnut.c [POWERPC] 4xx: Adds decoding of 440SPE memory size to boot wrapper library 2007-12-23 13:14:13 -06:00
types.h [POWERPC] Add signed types to bootwrapper 2007-06-28 19:16:47 +10:00
uartlite.c [POWERPC] Uartlite: bootwrapper bug fix, getc loops forever 2007-10-10 09:14:35 -06:00
util.S [POWERPC] Add non-OF serial console support 2006-10-23 12:49:19 +10:00
wrapper [POWERPC] bootwrapper: Build multiple cuImages 2008-02-07 11:40:19 +11:00
zImage.coff.lds.S [POWERPC] zImage: Cleanup and improve zImage entry point 2007-03-13 13:35:03 +11:00
zImage.lds.S [POWERPC] zImage: Cleanup and improve zImage entry point 2007-03-13 13:35:03 +11:00
zImage.ps3.lds.S [POWERPC] PS3: Bootwrapper support. 2007-07-10 21:56:40 +10:00

README 

To extract the kernel vmlinux, System.map, .config or initrd from the zImage binary:

objcopy -j .kernel:vmlinux -O binary zImage vmlinux.gz
objcopy -j .kernel:System.map -O binary zImage System.map.gz
objcopy -j .kernel:.config -O binary zImage config.gz
objcopy -j .kernel:initrd -O binary zImage.initrd initrd.gz


	Peter