mirror of
https://github.com/edk2-porting/linux-next.git
synced 2024-12-27 06:34:11 +08:00
7d12e780e0
Maintain a per-CPU global "struct pt_regs *" variable which can be used instead of passing regs around manually through all ~1800 interrupt handlers in the Linux kernel. The regs pointer is used in few places, but it potentially costs both stack space and code to pass it around. On the FRV arch, removing the regs parameter from all the genirq function results in a 20% speed up of the IRQ exit path (ie: from leaving timer_interrupt() to leaving do_IRQ()). Where appropriate, an arch may override the generic storage facility and do something different with the variable. On FRV, for instance, the address is maintained in GR28 at all times inside the kernel as part of general exception handling. Having looked over the code, it appears that the parameter may be handed down through up to twenty or so layers of functions. Consider a USB character device attached to a USB hub, attached to a USB controller that posts its interrupts through a cascaded auxiliary interrupt controller. A character device driver may want to pass regs to the sysrq handler through the input layer which adds another few layers of parameter passing. I've build this code with allyesconfig for x86_64 and i386. I've runtested the main part of the code on FRV and i386, though I can't test most of the drivers. I've also done partial conversion for powerpc and MIPS - these at least compile with minimal configurations. This will affect all archs. Mostly the changes should be relatively easy. Take do_IRQ(), store the regs pointer at the beginning, saving the old one: struct pt_regs *old_regs = set_irq_regs(regs); And put the old one back at the end: set_irq_regs(old_regs); Don't pass regs through to generic_handle_irq() or __do_IRQ(). In timer_interrupt(), this sort of change will be necessary: - update_process_times(user_mode(regs)); - profile_tick(CPU_PROFILING, regs); + update_process_times(user_mode(get_irq_regs())); + profile_tick(CPU_PROFILING); I'd like to move update_process_times()'s use of get_irq_regs() into itself, except that i386, alone of the archs, uses something other than user_mode(). Some notes on the interrupt handling in the drivers: (*) input_dev() is now gone entirely. The regs pointer is no longer stored in the input_dev struct. (*) finish_unlinks() in drivers/usb/host/ohci-q.c needs checking. It does something different depending on whether it's been supplied with a regs pointer or not. (*) Various IRQ handler function pointers have been moved to type irq_handler_t. Signed-Off-By: David Howells <dhowells@redhat.com> (cherry picked from 1b16e7ac850969f38b375e511e3fa2f474a33867 commit)
501 lines
13 KiB
C
501 lines
13 KiB
C
/* $Id: teles3.c,v 2.19.2.4 2004/01/13 23:48:39 keil Exp $
|
|
*
|
|
* low level stuff for Teles 16.3 & PNP isdn cards
|
|
*
|
|
* Author Karsten Keil
|
|
* Copyright by Karsten Keil <keil@isdn4linux.de>
|
|
*
|
|
* This software may be used and distributed according to the terms
|
|
* of the GNU General Public License, incorporated herein by reference.
|
|
*
|
|
* Thanks to Jan den Ouden
|
|
* Fritz Elfert
|
|
* Beat Doebeli
|
|
*
|
|
*/
|
|
#include <linux/init.h>
|
|
#include <linux/isapnp.h>
|
|
#include "hisax.h"
|
|
#include "isac.h"
|
|
#include "hscx.h"
|
|
#include "isdnl1.h"
|
|
|
|
extern const char *CardType[];
|
|
static const char *teles3_revision = "$Revision: 2.19.2.4 $";
|
|
|
|
#define byteout(addr,val) outb(val,addr)
|
|
#define bytein(addr) inb(addr)
|
|
|
|
static inline u_char
|
|
readreg(unsigned int adr, u_char off)
|
|
{
|
|
return (bytein(adr + off));
|
|
}
|
|
|
|
static inline void
|
|
writereg(unsigned int adr, u_char off, u_char data)
|
|
{
|
|
byteout(adr + off, data);
|
|
}
|
|
|
|
|
|
static inline void
|
|
read_fifo(unsigned int adr, u_char * data, int size)
|
|
{
|
|
insb(adr, data, size);
|
|
}
|
|
|
|
static void
|
|
write_fifo(unsigned int adr, u_char * data, int size)
|
|
{
|
|
outsb(adr, data, size);
|
|
}
|
|
|
|
/* Interface functions */
|
|
|
|
static u_char
|
|
ReadISAC(struct IsdnCardState *cs, u_char offset)
|
|
{
|
|
return (readreg(cs->hw.teles3.isac, offset));
|
|
}
|
|
|
|
static void
|
|
WriteISAC(struct IsdnCardState *cs, u_char offset, u_char value)
|
|
{
|
|
writereg(cs->hw.teles3.isac, offset, value);
|
|
}
|
|
|
|
static void
|
|
ReadISACfifo(struct IsdnCardState *cs, u_char * data, int size)
|
|
{
|
|
read_fifo(cs->hw.teles3.isacfifo, data, size);
|
|
}
|
|
|
|
static void
|
|
WriteISACfifo(struct IsdnCardState *cs, u_char * data, int size)
|
|
{
|
|
write_fifo(cs->hw.teles3.isacfifo, data, size);
|
|
}
|
|
|
|
static u_char
|
|
ReadHSCX(struct IsdnCardState *cs, int hscx, u_char offset)
|
|
{
|
|
return (readreg(cs->hw.teles3.hscx[hscx], offset));
|
|
}
|
|
|
|
static void
|
|
WriteHSCX(struct IsdnCardState *cs, int hscx, u_char offset, u_char value)
|
|
{
|
|
writereg(cs->hw.teles3.hscx[hscx], offset, value);
|
|
}
|
|
|
|
/*
|
|
* fast interrupt HSCX stuff goes here
|
|
*/
|
|
|
|
#define READHSCX(cs, nr, reg) readreg(cs->hw.teles3.hscx[nr], reg)
|
|
#define WRITEHSCX(cs, nr, reg, data) writereg(cs->hw.teles3.hscx[nr], reg, data)
|
|
#define READHSCXFIFO(cs, nr, ptr, cnt) read_fifo(cs->hw.teles3.hscxfifo[nr], ptr, cnt)
|
|
#define WRITEHSCXFIFO(cs, nr, ptr, cnt) write_fifo(cs->hw.teles3.hscxfifo[nr], ptr, cnt)
|
|
|
|
#include "hscx_irq.c"
|
|
|
|
static irqreturn_t
|
|
teles3_interrupt(int intno, void *dev_id)
|
|
{
|
|
#define MAXCOUNT 5
|
|
struct IsdnCardState *cs = dev_id;
|
|
u_char val;
|
|
u_long flags;
|
|
int count = 0;
|
|
|
|
spin_lock_irqsave(&cs->lock, flags);
|
|
val = readreg(cs->hw.teles3.hscx[1], HSCX_ISTA);
|
|
Start_HSCX:
|
|
if (val)
|
|
hscx_int_main(cs, val);
|
|
val = readreg(cs->hw.teles3.isac, ISAC_ISTA);
|
|
Start_ISAC:
|
|
if (val)
|
|
isac_interrupt(cs, val);
|
|
count++;
|
|
val = readreg(cs->hw.teles3.hscx[1], HSCX_ISTA);
|
|
if (val && count < MAXCOUNT) {
|
|
if (cs->debug & L1_DEB_HSCX)
|
|
debugl1(cs, "HSCX IntStat after IntRoutine");
|
|
goto Start_HSCX;
|
|
}
|
|
val = readreg(cs->hw.teles3.isac, ISAC_ISTA);
|
|
if (val && count < MAXCOUNT) {
|
|
if (cs->debug & L1_DEB_ISAC)
|
|
debugl1(cs, "ISAC IntStat after IntRoutine");
|
|
goto Start_ISAC;
|
|
}
|
|
if (count >= MAXCOUNT)
|
|
printk(KERN_WARNING "Teles3: more than %d loops in teles3_interrupt\n", count);
|
|
writereg(cs->hw.teles3.hscx[0], HSCX_MASK, 0xFF);
|
|
writereg(cs->hw.teles3.hscx[1], HSCX_MASK, 0xFF);
|
|
writereg(cs->hw.teles3.isac, ISAC_MASK, 0xFF);
|
|
writereg(cs->hw.teles3.isac, ISAC_MASK, 0x0);
|
|
writereg(cs->hw.teles3.hscx[0], HSCX_MASK, 0x0);
|
|
writereg(cs->hw.teles3.hscx[1], HSCX_MASK, 0x0);
|
|
spin_unlock_irqrestore(&cs->lock, flags);
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
static inline void
|
|
release_ioregs(struct IsdnCardState *cs, int mask)
|
|
{
|
|
if (mask & 1)
|
|
release_region(cs->hw.teles3.isac + 32, 32);
|
|
if (mask & 2)
|
|
release_region(cs->hw.teles3.hscx[0] + 32, 32);
|
|
if (mask & 4)
|
|
release_region(cs->hw.teles3.hscx[1] + 32, 32);
|
|
}
|
|
|
|
static void
|
|
release_io_teles3(struct IsdnCardState *cs)
|
|
{
|
|
if (cs->typ == ISDN_CTYPE_TELESPCMCIA) {
|
|
release_region(cs->hw.teles3.hscx[1], 96);
|
|
} else {
|
|
if (cs->hw.teles3.cfg_reg) {
|
|
if (cs->typ == ISDN_CTYPE_COMPAQ_ISA) {
|
|
release_region(cs->hw.teles3.cfg_reg, 1);
|
|
} else {
|
|
release_region(cs->hw.teles3.cfg_reg, 8);
|
|
}
|
|
}
|
|
release_ioregs(cs, 0x7);
|
|
}
|
|
}
|
|
|
|
static int
|
|
reset_teles3(struct IsdnCardState *cs)
|
|
{
|
|
u_char irqcfg;
|
|
|
|
if (cs->typ != ISDN_CTYPE_TELESPCMCIA) {
|
|
if ((cs->hw.teles3.cfg_reg) && (cs->typ != ISDN_CTYPE_COMPAQ_ISA)) {
|
|
switch (cs->irq) {
|
|
case 2:
|
|
case 9:
|
|
irqcfg = 0x00;
|
|
break;
|
|
case 3:
|
|
irqcfg = 0x02;
|
|
break;
|
|
case 4:
|
|
irqcfg = 0x04;
|
|
break;
|
|
case 5:
|
|
irqcfg = 0x06;
|
|
break;
|
|
case 10:
|
|
irqcfg = 0x08;
|
|
break;
|
|
case 11:
|
|
irqcfg = 0x0A;
|
|
break;
|
|
case 12:
|
|
irqcfg = 0x0C;
|
|
break;
|
|
case 15:
|
|
irqcfg = 0x0E;
|
|
break;
|
|
default:
|
|
return(1);
|
|
}
|
|
byteout(cs->hw.teles3.cfg_reg + 4, irqcfg);
|
|
HZDELAY(HZ / 10 + 1);
|
|
byteout(cs->hw.teles3.cfg_reg + 4, irqcfg | 1);
|
|
HZDELAY(HZ / 10 + 1);
|
|
} else if (cs->typ == ISDN_CTYPE_COMPAQ_ISA) {
|
|
byteout(cs->hw.teles3.cfg_reg, 0xff);
|
|
HZDELAY(2);
|
|
byteout(cs->hw.teles3.cfg_reg, 0x00);
|
|
HZDELAY(2);
|
|
} else {
|
|
/* Reset off for 16.3 PnP , thanks to Georg Acher */
|
|
byteout(cs->hw.teles3.isac + 0x3c, 0);
|
|
HZDELAY(2);
|
|
byteout(cs->hw.teles3.isac + 0x3c, 1);
|
|
HZDELAY(2);
|
|
}
|
|
}
|
|
return(0);
|
|
}
|
|
|
|
static int
|
|
Teles_card_msg(struct IsdnCardState *cs, int mt, void *arg)
|
|
{
|
|
u_long flags;
|
|
|
|
switch (mt) {
|
|
case CARD_RESET:
|
|
spin_lock_irqsave(&cs->lock, flags);
|
|
reset_teles3(cs);
|
|
spin_unlock_irqrestore(&cs->lock, flags);
|
|
return(0);
|
|
case CARD_RELEASE:
|
|
release_io_teles3(cs);
|
|
return(0);
|
|
case CARD_INIT:
|
|
spin_lock_irqsave(&cs->lock, flags);
|
|
inithscxisac(cs, 3);
|
|
spin_unlock_irqrestore(&cs->lock, flags);
|
|
return(0);
|
|
case CARD_TEST:
|
|
return(0);
|
|
}
|
|
return(0);
|
|
}
|
|
|
|
#ifdef __ISAPNP__
|
|
|
|
static struct isapnp_device_id teles_ids[] __devinitdata = {
|
|
{ ISAPNP_VENDOR('T', 'A', 'G'), ISAPNP_FUNCTION(0x2110),
|
|
ISAPNP_VENDOR('T', 'A', 'G'), ISAPNP_FUNCTION(0x2110),
|
|
(unsigned long) "Teles 16.3 PnP" },
|
|
{ ISAPNP_VENDOR('C', 'T', 'X'), ISAPNP_FUNCTION(0x0),
|
|
ISAPNP_VENDOR('C', 'T', 'X'), ISAPNP_FUNCTION(0x0),
|
|
(unsigned long) "Creatix 16.3 PnP" },
|
|
{ ISAPNP_VENDOR('C', 'P', 'Q'), ISAPNP_FUNCTION(0x1002),
|
|
ISAPNP_VENDOR('C', 'P', 'Q'), ISAPNP_FUNCTION(0x1002),
|
|
(unsigned long) "Compaq ISDN S0" },
|
|
{ 0, }
|
|
};
|
|
|
|
static struct isapnp_device_id *ipid __devinitdata = &teles_ids[0];
|
|
static struct pnp_card *pnp_c __devinitdata = NULL;
|
|
#endif
|
|
|
|
int __devinit
|
|
setup_teles3(struct IsdnCard *card)
|
|
{
|
|
u_char val;
|
|
struct IsdnCardState *cs = card->cs;
|
|
char tmp[64];
|
|
|
|
strcpy(tmp, teles3_revision);
|
|
printk(KERN_INFO "HiSax: Teles IO driver Rev. %s\n", HiSax_getrev(tmp));
|
|
if ((cs->typ != ISDN_CTYPE_16_3) && (cs->typ != ISDN_CTYPE_PNP)
|
|
&& (cs->typ != ISDN_CTYPE_TELESPCMCIA) && (cs->typ != ISDN_CTYPE_COMPAQ_ISA))
|
|
return (0);
|
|
|
|
#ifdef __ISAPNP__
|
|
if (!card->para[1] && isapnp_present()) {
|
|
struct pnp_dev *pnp_d;
|
|
while(ipid->card_vendor) {
|
|
if ((pnp_c = pnp_find_card(ipid->card_vendor,
|
|
ipid->card_device, pnp_c))) {
|
|
pnp_d = NULL;
|
|
if ((pnp_d = pnp_find_dev(pnp_c,
|
|
ipid->vendor, ipid->function, pnp_d))) {
|
|
int err;
|
|
|
|
printk(KERN_INFO "HiSax: %s detected\n",
|
|
(char *)ipid->driver_data);
|
|
pnp_disable_dev(pnp_d);
|
|
err = pnp_activate_dev(pnp_d);
|
|
if (err<0) {
|
|
printk(KERN_WARNING "%s: pnp_activate_dev ret(%d)\n",
|
|
__FUNCTION__, err);
|
|
return(0);
|
|
}
|
|
card->para[3] = pnp_port_start(pnp_d, 2);
|
|
card->para[2] = pnp_port_start(pnp_d, 1);
|
|
card->para[1] = pnp_port_start(pnp_d, 0);
|
|
card->para[0] = pnp_irq(pnp_d, 0);
|
|
if (!card->para[0] || !card->para[1] || !card->para[2]) {
|
|
printk(KERN_ERR "Teles PnP:some resources are missing %ld/%lx/%lx\n",
|
|
card->para[0], card->para[1], card->para[2]);
|
|
pnp_disable_dev(pnp_d);
|
|
return(0);
|
|
}
|
|
break;
|
|
} else {
|
|
printk(KERN_ERR "Teles PnP: PnP error card found, no device\n");
|
|
}
|
|
}
|
|
ipid++;
|
|
pnp_c = NULL;
|
|
}
|
|
if (!ipid->card_vendor) {
|
|
printk(KERN_INFO "Teles PnP: no ISAPnP card found\n");
|
|
return(0);
|
|
}
|
|
}
|
|
#endif
|
|
if (cs->typ == ISDN_CTYPE_16_3) {
|
|
cs->hw.teles3.cfg_reg = card->para[1];
|
|
switch (cs->hw.teles3.cfg_reg) {
|
|
case 0x180:
|
|
case 0x280:
|
|
case 0x380:
|
|
cs->hw.teles3.cfg_reg |= 0xc00;
|
|
break;
|
|
}
|
|
cs->hw.teles3.isac = cs->hw.teles3.cfg_reg - 0x420;
|
|
cs->hw.teles3.hscx[0] = cs->hw.teles3.cfg_reg - 0xc20;
|
|
cs->hw.teles3.hscx[1] = cs->hw.teles3.cfg_reg - 0x820;
|
|
} else if (cs->typ == ISDN_CTYPE_TELESPCMCIA) {
|
|
cs->hw.teles3.cfg_reg = 0;
|
|
cs->hw.teles3.hscx[0] = card->para[1] - 0x20;
|
|
cs->hw.teles3.hscx[1] = card->para[1];
|
|
cs->hw.teles3.isac = card->para[1] + 0x20;
|
|
} else if (cs->typ == ISDN_CTYPE_COMPAQ_ISA) {
|
|
cs->hw.teles3.cfg_reg = card->para[3];
|
|
cs->hw.teles3.isac = card->para[2] - 32;
|
|
cs->hw.teles3.hscx[0] = card->para[1] - 32;
|
|
cs->hw.teles3.hscx[1] = card->para[1];
|
|
} else { /* PNP */
|
|
cs->hw.teles3.cfg_reg = 0;
|
|
cs->hw.teles3.isac = card->para[1] - 32;
|
|
cs->hw.teles3.hscx[0] = card->para[2] - 32;
|
|
cs->hw.teles3.hscx[1] = card->para[2];
|
|
}
|
|
cs->irq = card->para[0];
|
|
cs->hw.teles3.isacfifo = cs->hw.teles3.isac + 0x3e;
|
|
cs->hw.teles3.hscxfifo[0] = cs->hw.teles3.hscx[0] + 0x3e;
|
|
cs->hw.teles3.hscxfifo[1] = cs->hw.teles3.hscx[1] + 0x3e;
|
|
if (cs->typ == ISDN_CTYPE_TELESPCMCIA) {
|
|
if (!request_region(cs->hw.teles3.hscx[1], 96, "HiSax Teles PCMCIA")) {
|
|
printk(KERN_WARNING
|
|
"HiSax: %s ports %x-%x already in use\n",
|
|
CardType[cs->typ],
|
|
cs->hw.teles3.hscx[1],
|
|
cs->hw.teles3.hscx[1] + 96);
|
|
return (0);
|
|
}
|
|
cs->irq_flags |= IRQF_SHARED; /* cardbus can share */
|
|
} else {
|
|
if (cs->hw.teles3.cfg_reg) {
|
|
if (cs->typ == ISDN_CTYPE_COMPAQ_ISA) {
|
|
if (!request_region(cs->hw.teles3.cfg_reg, 1, "teles3 cfg")) {
|
|
printk(KERN_WARNING
|
|
"HiSax: %s config port %x already in use\n",
|
|
CardType[card->typ],
|
|
cs->hw.teles3.cfg_reg);
|
|
return (0);
|
|
}
|
|
} else {
|
|
if (!request_region(cs->hw.teles3.cfg_reg, 8, "teles3 cfg")) {
|
|
printk(KERN_WARNING
|
|
"HiSax: %s config port %x-%x already in use\n",
|
|
CardType[card->typ],
|
|
cs->hw.teles3.cfg_reg,
|
|
cs->hw.teles3.cfg_reg + 8);
|
|
return (0);
|
|
}
|
|
}
|
|
}
|
|
if (!request_region(cs->hw.teles3.isac + 32, 32, "HiSax isac")) {
|
|
printk(KERN_WARNING
|
|
"HiSax: %s isac ports %x-%x already in use\n",
|
|
CardType[cs->typ],
|
|
cs->hw.teles3.isac + 32,
|
|
cs->hw.teles3.isac + 64);
|
|
if (cs->hw.teles3.cfg_reg) {
|
|
if (cs->typ == ISDN_CTYPE_COMPAQ_ISA) {
|
|
release_region(cs->hw.teles3.cfg_reg, 1);
|
|
} else {
|
|
release_region(cs->hw.teles3.cfg_reg, 8);
|
|
}
|
|
}
|
|
return (0);
|
|
}
|
|
if (!request_region(cs->hw.teles3.hscx[0] + 32, 32, "HiSax hscx A")) {
|
|
printk(KERN_WARNING
|
|
"HiSax: %s hscx A ports %x-%x already in use\n",
|
|
CardType[cs->typ],
|
|
cs->hw.teles3.hscx[0] + 32,
|
|
cs->hw.teles3.hscx[0] + 64);
|
|
if (cs->hw.teles3.cfg_reg) {
|
|
if (cs->typ == ISDN_CTYPE_COMPAQ_ISA) {
|
|
release_region(cs->hw.teles3.cfg_reg, 1);
|
|
} else {
|
|
release_region(cs->hw.teles3.cfg_reg, 8);
|
|
}
|
|
}
|
|
release_ioregs(cs, 1);
|
|
return (0);
|
|
}
|
|
if (!request_region(cs->hw.teles3.hscx[1] + 32, 32, "HiSax hscx B")) {
|
|
printk(KERN_WARNING
|
|
"HiSax: %s hscx B ports %x-%x already in use\n",
|
|
CardType[cs->typ],
|
|
cs->hw.teles3.hscx[1] + 32,
|
|
cs->hw.teles3.hscx[1] + 64);
|
|
if (cs->hw.teles3.cfg_reg) {
|
|
if (cs->typ == ISDN_CTYPE_COMPAQ_ISA) {
|
|
release_region(cs->hw.teles3.cfg_reg, 1);
|
|
} else {
|
|
release_region(cs->hw.teles3.cfg_reg, 8);
|
|
}
|
|
}
|
|
release_ioregs(cs, 3);
|
|
return (0);
|
|
}
|
|
}
|
|
if ((cs->hw.teles3.cfg_reg) && (cs->typ != ISDN_CTYPE_COMPAQ_ISA)) {
|
|
if ((val = bytein(cs->hw.teles3.cfg_reg + 0)) != 0x51) {
|
|
printk(KERN_WARNING "Teles: 16.3 Byte at %x is %x\n",
|
|
cs->hw.teles3.cfg_reg + 0, val);
|
|
release_io_teles3(cs);
|
|
return (0);
|
|
}
|
|
if ((val = bytein(cs->hw.teles3.cfg_reg + 1)) != 0x93) {
|
|
printk(KERN_WARNING "Teles: 16.3 Byte at %x is %x\n",
|
|
cs->hw.teles3.cfg_reg + 1, val);
|
|
release_io_teles3(cs);
|
|
return (0);
|
|
}
|
|
val = bytein(cs->hw.teles3.cfg_reg + 2);/* 0x1e=without AB
|
|
* 0x1f=with AB
|
|
* 0x1c 16.3 ???
|
|
* 0x39 16.3 1.1
|
|
* 0x38 16.3 1.3
|
|
* 0x46 16.3 with AB + Video (Teles-Vision)
|
|
*/
|
|
if (val != 0x46 && val != 0x39 && val != 0x38 && val != 0x1c && val != 0x1e && val != 0x1f) {
|
|
printk(KERN_WARNING "Teles: 16.3 Byte at %x is %x\n",
|
|
cs->hw.teles3.cfg_reg + 2, val);
|
|
release_io_teles3(cs);
|
|
return (0);
|
|
}
|
|
}
|
|
printk(KERN_INFO
|
|
"HiSax: %s config irq:%d isac:0x%X cfg:0x%X\n",
|
|
CardType[cs->typ], cs->irq,
|
|
cs->hw.teles3.isac + 32, cs->hw.teles3.cfg_reg);
|
|
printk(KERN_INFO
|
|
"HiSax: hscx A:0x%X hscx B:0x%X\n",
|
|
cs->hw.teles3.hscx[0] + 32, cs->hw.teles3.hscx[1] + 32);
|
|
|
|
setup_isac(cs);
|
|
if (reset_teles3(cs)) {
|
|
printk(KERN_WARNING "Teles3: wrong IRQ\n");
|
|
release_io_teles3(cs);
|
|
return (0);
|
|
}
|
|
cs->readisac = &ReadISAC;
|
|
cs->writeisac = &WriteISAC;
|
|
cs->readisacfifo = &ReadISACfifo;
|
|
cs->writeisacfifo = &WriteISACfifo;
|
|
cs->BC_Read_Reg = &ReadHSCX;
|
|
cs->BC_Write_Reg = &WriteHSCX;
|
|
cs->BC_Send_Data = &hscx_fill_fifo;
|
|
cs->cardmsg = &Teles_card_msg;
|
|
cs->irq_func = &teles3_interrupt;
|
|
ISACVersion(cs, "Teles3:");
|
|
if (HscxVersion(cs, "Teles3:")) {
|
|
printk(KERN_WARNING
|
|
"Teles3: wrong HSCX versions check IO address\n");
|
|
release_io_teles3(cs);
|
|
return (0);
|
|
}
|
|
return (1);
|
|
}
|