Remi Machet 21dbfd291f [POWERPC] Use default values if necessary in mv64x60 I2C initialization ... I2C parameters freq_m and freq_n are assigned defaults in the code, but if properties for those parameters are not found in the open firmware description the init routine returns an error and doesn't create the platform device. This changes the code so that it doesn't return an error if the properties are not found but instead uses the default values. Signed-off-by: Remi Machet (rmachet@slac.stanford.edu) Acked-by: Dale Farnsworth <dale@farnsworth.org> Signed-off-by: Paul Mackerras <paulus@samba.org>		2008-04-24 20:57:34 +10:00
..
bestcomm	[POWERPC] Fix Oops with TQM5200 on TQM5200	2008-03-24 17:55:51 +11:00
qe_lib	[POWERPC] QE: fix sparse warnings	2008-04-17 01:01:39 -05:00
axonram.c	[POWERPC] Clean out asm/of_{platform, device}.h from sysdev/	2007-12-06 14:44:30 +11:00
cpm1.c	[POWERPC] CPM: Always use new binding.	2008-04-17 01:01:40 -05:00
cpm2_pic.c	[POWERPC] cpm2: Infrastructure code cleanup.	2007-10-04 11:02:04 -05:00
cpm2_pic.h	[POWERPC] cpm2: CPM2 interrupt controller fix	2007-02-07 14:03:20 +11:00
cpm2.c	[POWERPC] CPM: Always use new binding.	2008-04-17 01:01:40 -05:00
cpm_common.c	[POWERPC] CPM: Always use new binding.	2008-04-17 01:01:40 -05:00
dart_iommu.c	[LIB]: Make PowerPC LMB code generic so sparc64 can use it too.	2008-02-13 16:56:49 -08:00
dart.h	[POWERPC] Use 4kB iommu pages even on 64kB-page systems	2006-11-01 14:52:48 +11:00
dcr-low.S	[POWERPC] Generic DCR infrastructure	2006-12-04 16:08:25 +11:00
dcr.c	[POWERPC] Add missing native dcr dcr_ind_lock spinlock	2008-02-06 21:02:56 -06:00
fsl_lbc.c	[POWERPC] fsl_lbc: implement few UPM routines	2008-04-17 01:01:38 -05:00
fsl_pci.c	[POWERPC] FSL: Rework PCI/PCIe support for 85xx/86xx	2008-01-23 19:31:16 -06:00
fsl_pci.h	[POWERPC] Fixup resources on pci_bus for PCIe PHB when no device is connected	2007-07-23 10:27:08 -05:00
fsl_rio.c	[POWERPC] Move RapidIO support code from arch/ppc	2008-01-23 19:35:15 -06:00
fsl_rio.h	[POWERPC] Move RapidIO support code from arch/ppc	2008-01-23 19:35:15 -06:00
fsl_soc.c	Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc	2008-04-21 15:50:49 -07:00
fsl_soc.h	[POWERPC] fsl_soc: Factor fsl_get_sys_freq() out of the wdt and spi inits.	2008-04-17 01:01:40 -05:00
grackle.c	[POWERPC] pci32: Add flags modifying the PCI code behaviour	2007-12-20 16:18:07 +11:00
i8259.c	[POWERPC] i8259: Add disable method	2007-11-08 14:15:29 +11:00
indirect_pci.c	[POWERPC] PCI: Add 64-bit physical address support to setup_indirect_pci	2007-10-12 14:05:17 +10:00
ipic.c	[POWERPC] Fix crash in init_ipic_sysfs on efika	2008-03-24 17:55:00 +11:00
ipic.h	[POWERPC] ipic: ack only for edge interrupts	2007-12-12 01:53:07 -06:00
Kconfig	[POWERPC] 4xx: PLB to PCI Express support	2007-12-23 13:12:34 -06:00
Makefile	[POWERPC] fsl_lbc: implement few UPM routines	2008-04-17 01:01:38 -05:00
micropatch.c	[POWERPC] CPM: Rename commproc to cpm1 and cpm2_common.c to cpm2.c	2008-01-28 08:31:05 -06:00
mmio_nvram.c	[POWERPC] arch/powerpc/: Spelling fixes	2007-12-20 16:15:51 +11:00
mpc8xx_pic.c	[POWERPC] arch/powerpc/sysdev: Add missing of_node_put	2008-02-06 22:06:59 +11:00
mpc8xx_pic.h	[POWERPC] 8xx: mpc885ads pcmcia support	2007-07-10 00:33:51 -05:00
mpic_msi.c	[POWERPC] Fix section mismatch in PCI code	2007-09-19 15:25:34 +10:00
mpic_pasemi_msi.c	[POWERPC] pasemi: Remove warning in mpic_pasemi_msi.c	2008-02-21 21:08:35 +11:00
mpic_u3msi.c	[POWERPC] Inline u3msi_compose_msi_msg()	2007-10-03 09:11:42 +10:00
mpic.c	[POWERPC] kexec: MPIC ack interrupts at mpic_teardown_this_cpu()	2008-04-07 09:16:29 -05:00
mpic.h	[POWERPC] pasemi: Implement NMI support	2007-12-28 09:22:24 -06:00
mv64x60_dev.c	[POWERPC] Use default values if necessary in mv64x60 I2C initialization	2008-04-24 20:57:34 +10:00
mv64x60_pci.c	[POWERPC] mv64x60: Fix FDT compatible names: mv64x60 => mv64360	2008-04-15 21:21:24 +10:00
mv64x60_pic.c	[POWERPC] mv64x60: Fix FDT compatible names: mv64x60 => mv64360	2008-04-15 21:21:24 +10:00
mv64x60_udbg.c	[POWERPC] mv64x60: Fix FDT compatible names: mv64x60 => mv64360	2008-04-15 21:21:24 +10:00
mv64x60.h	[POWERPC] Add Marvell mv64x60 udbg putc/getc functions	2007-09-22 14:49:21 +10:00
of_rtc.c	[POWERPC] Enable RTC for Ebony and Walnut (v2)	2008-01-25 07:07:26 -06:00
pmi.c	[POWERPC] Clean out asm/of_{platform, device}.h from sysdev/	2007-12-06 14:44:30 +11:00
ppc4xx_pci.c	[POWERPC] 4xx: Fix PESDRn_UTLSET1 register setup on 460EX/GT	2008-04-02 20:29:30 -05:00
ppc4xx_pci.h	[POWERPC] 4xx: Add 460EX PCIe support to 4xx pci driver	2008-03-26 07:19:16 -05:00
ppc4xx_soc.c	[POWERPC] 4xx: Create common ppc4xx_reset_system() in ppc4xx_soc.c	2008-04-02 20:44:56 -05:00
rtc_cmos_setup.c	[POWERPC] Add MODULE_LICENSE to powerpc/sysdev/rtc_cmos_setup.c	2008-04-17 07:46:12 +10:00
tsi108_dev.c	[POWERPC] Replace remaining __FUNCTION__ occurrences	2008-04-01 20:43:09 +11:00
tsi108_pci.c	[POWERPC] Replace remaining __FUNCTION__ occurrences	2008-04-01 20:43:09 +11:00
uic.c	[POWERPC] Use for_each macros in arch/powerpc/sysdev	2008-01-17 14:56:54 +11:00
xilinx_intc.c	[POWERPC] Xilinx: update compatible list for interrupt controller	2008-01-09 07:48:31 -07:00