mirror of
https://github.com/edk2-porting/linux-next.git
synced 2024-12-28 15:13:55 +08:00
213fb2a8ee
The SWP instruction has been deprecated starting with the ARMv6 architecture. On ARMv7 processors with the multiprocessor extensions (like Cortex-A9), this instruction is disabled by default but it can be enabled by setting bit 10 in the System Control register. Note that setting this bit is safe even if the ARMv7 processor has the SWP instruction enabled by default. Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
299 lines
7.3 KiB
ArmAsm
299 lines
7.3 KiB
ArmAsm
/*
|
|
* linux/arch/arm/mm/proc-v7.S
|
|
*
|
|
* Copyright (C) 2001 Deep Blue Solutions Ltd.
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License version 2 as
|
|
* published by the Free Software Foundation.
|
|
*
|
|
* This is the "shell" of the ARMv7 processor support.
|
|
*/
|
|
#include <linux/init.h>
|
|
#include <linux/linkage.h>
|
|
#include <asm/assembler.h>
|
|
#include <asm/asm-offsets.h>
|
|
#include <asm/hwcap.h>
|
|
#include <asm/pgtable-hwdef.h>
|
|
#include <asm/pgtable.h>
|
|
|
|
#include "proc-macros.S"
|
|
|
|
#define TTB_S (1 << 1)
|
|
#define TTB_RGN_NC (0 << 3)
|
|
#define TTB_RGN_OC_WBWA (1 << 3)
|
|
#define TTB_RGN_OC_WT (2 << 3)
|
|
#define TTB_RGN_OC_WB (3 << 3)
|
|
#define TTB_NOS (1 << 5)
|
|
#define TTB_IRGN_NC ((0 << 0) | (0 << 6))
|
|
#define TTB_IRGN_WBWA ((0 << 0) | (1 << 6))
|
|
#define TTB_IRGN_WT ((1 << 0) | (0 << 6))
|
|
#define TTB_IRGN_WB ((1 << 0) | (1 << 6))
|
|
|
|
#ifndef CONFIG_SMP
|
|
/* PTWs cacheable, inner WB not shareable, outer WB not shareable */
|
|
#define TTB_FLAGS TTB_IRGN_WB|TTB_RGN_OC_WB
|
|
#else
|
|
/* PTWs cacheable, inner WBWA shareable, outer WBWA not shareable */
|
|
#define TTB_FLAGS TTB_IRGN_WBWA|TTB_S|TTB_NOS|TTB_RGN_OC_WBWA
|
|
#endif
|
|
|
|
ENTRY(cpu_v7_proc_init)
|
|
mov pc, lr
|
|
ENDPROC(cpu_v7_proc_init)
|
|
|
|
ENTRY(cpu_v7_proc_fin)
|
|
mov pc, lr
|
|
ENDPROC(cpu_v7_proc_fin)
|
|
|
|
/*
|
|
* cpu_v7_reset(loc)
|
|
*
|
|
* Perform a soft reset of the system. Put the CPU into the
|
|
* same state as it would be if it had been reset, and branch
|
|
* to what would be the reset vector.
|
|
*
|
|
* - loc - location to jump to for soft reset
|
|
*
|
|
* It is assumed that:
|
|
*/
|
|
.align 5
|
|
ENTRY(cpu_v7_reset)
|
|
mov pc, r0
|
|
ENDPROC(cpu_v7_reset)
|
|
|
|
/*
|
|
* cpu_v7_do_idle()
|
|
*
|
|
* Idle the processor (eg, wait for interrupt).
|
|
*
|
|
* IRQs are already disabled.
|
|
*/
|
|
ENTRY(cpu_v7_do_idle)
|
|
dsb @ WFI may enter a low-power mode
|
|
wfi
|
|
mov pc, lr
|
|
ENDPROC(cpu_v7_do_idle)
|
|
|
|
ENTRY(cpu_v7_dcache_clean_area)
|
|
#ifndef TLB_CAN_READ_FROM_L1_CACHE
|
|
dcache_line_size r2, r3
|
|
1: mcr p15, 0, r0, c7, c10, 1 @ clean D entry
|
|
add r0, r0, r2
|
|
subs r1, r1, r2
|
|
bhi 1b
|
|
dsb
|
|
#endif
|
|
mov pc, lr
|
|
ENDPROC(cpu_v7_dcache_clean_area)
|
|
|
|
/*
|
|
* cpu_v7_switch_mm(pgd_phys, tsk)
|
|
*
|
|
* Set the translation table base pointer to be pgd_phys
|
|
*
|
|
* - pgd_phys - physical address of new TTB
|
|
*
|
|
* It is assumed that:
|
|
* - we are not using split page tables
|
|
*/
|
|
ENTRY(cpu_v7_switch_mm)
|
|
#ifdef CONFIG_MMU
|
|
mov r2, #0
|
|
ldr r1, [r1, #MM_CONTEXT_ID] @ get mm->context.id
|
|
orr r0, r0, #TTB_FLAGS
|
|
#ifdef CONFIG_ARM_ERRATA_430973
|
|
mcr p15, 0, r2, c7, c5, 6 @ flush BTAC/BTB
|
|
#endif
|
|
mcr p15, 0, r2, c13, c0, 1 @ set reserved context ID
|
|
isb
|
|
1: mcr p15, 0, r0, c2, c0, 0 @ set TTB 0
|
|
isb
|
|
mcr p15, 0, r1, c13, c0, 1 @ set context ID
|
|
isb
|
|
#endif
|
|
mov pc, lr
|
|
ENDPROC(cpu_v7_switch_mm)
|
|
|
|
/*
|
|
* cpu_v7_set_pte_ext(ptep, pte)
|
|
*
|
|
* Set a level 2 translation table entry.
|
|
*
|
|
* - ptep - pointer to level 2 translation table entry
|
|
* (hardware version is stored at -1024 bytes)
|
|
* - pte - PTE value to store
|
|
* - ext - value for extended PTE bits
|
|
*/
|
|
ENTRY(cpu_v7_set_pte_ext)
|
|
#ifdef CONFIG_MMU
|
|
str r1, [r0], #-2048 @ linux version
|
|
|
|
bic r3, r1, #0x000003f0
|
|
bic r3, r3, #PTE_TYPE_MASK
|
|
orr r3, r3, r2
|
|
orr r3, r3, #PTE_EXT_AP0 | 2
|
|
|
|
tst r1, #1 << 4
|
|
orrne r3, r3, #PTE_EXT_TEX(1)
|
|
|
|
tst r1, #L_PTE_WRITE
|
|
tstne r1, #L_PTE_DIRTY
|
|
orreq r3, r3, #PTE_EXT_APX
|
|
|
|
tst r1, #L_PTE_USER
|
|
orrne r3, r3, #PTE_EXT_AP1
|
|
tstne r3, #PTE_EXT_APX
|
|
bicne r3, r3, #PTE_EXT_APX | PTE_EXT_AP0
|
|
|
|
tst r1, #L_PTE_EXEC
|
|
orreq r3, r3, #PTE_EXT_XN
|
|
|
|
tst r1, #L_PTE_YOUNG
|
|
tstne r1, #L_PTE_PRESENT
|
|
moveq r3, #0
|
|
|
|
str r3, [r0]
|
|
mcr p15, 0, r0, c7, c10, 1 @ flush_pte
|
|
#endif
|
|
mov pc, lr
|
|
ENDPROC(cpu_v7_set_pte_ext)
|
|
|
|
cpu_v7_name:
|
|
.ascii "ARMv7 Processor"
|
|
.align
|
|
|
|
__INIT
|
|
|
|
/*
|
|
* __v7_setup
|
|
*
|
|
* Initialise TLB, Caches, and MMU state ready to switch the MMU
|
|
* on. Return in r0 the new CP15 C1 control register setting.
|
|
*
|
|
* We automatically detect if we have a Harvard cache, and use the
|
|
* Harvard cache control instructions insead of the unified cache
|
|
* control instructions.
|
|
*
|
|
* This should be able to cover all ARMv7 cores.
|
|
*
|
|
* It is assumed that:
|
|
* - cache type register is implemented
|
|
*/
|
|
__v7_setup:
|
|
#ifdef CONFIG_SMP
|
|
mrc p15, 0, r0, c1, c0, 1 @ Enable SMP/nAMP mode and
|
|
orr r0, r0, #(1 << 6) | (1 << 0) @ TLB ops broadcasting
|
|
mcr p15, 0, r0, c1, c0, 1
|
|
#endif
|
|
adr r12, __v7_setup_stack @ the local stack
|
|
stmia r12, {r0-r5, r7, r9, r11, lr}
|
|
bl v7_flush_dcache_all
|
|
ldmia r12, {r0-r5, r7, r9, r11, lr}
|
|
#ifdef CONFIG_ARM_ERRATA_430973
|
|
mrc p15, 0, r10, c1, c0, 1 @ read aux control register
|
|
orr r10, r10, #(1 << 6) @ set IBE to 1
|
|
mcr p15, 0, r10, c1, c0, 1 @ write aux control register
|
|
#endif
|
|
#ifdef CONFIG_ARM_ERRATA_458693
|
|
mrc p15, 0, r10, c1, c0, 1 @ read aux control register
|
|
orr r10, r10, #(1 << 5) @ set L1NEON to 1
|
|
orr r10, r10, #(1 << 9) @ set PLDNOP to 1
|
|
mcr p15, 0, r10, c1, c0, 1 @ write aux control register
|
|
#endif
|
|
#ifdef CONFIG_ARM_ERRATA_460075
|
|
mrc p15, 1, r10, c9, c0, 2 @ read L2 cache aux ctrl register
|
|
orr r10, r10, #(1 << 22) @ set the Write Allocate disable bit
|
|
mcr p15, 1, r10, c9, c0, 2 @ write the L2 cache aux ctrl register
|
|
#endif
|
|
mov r10, #0
|
|
#ifdef HARVARD_CACHE
|
|
mcr p15, 0, r10, c7, c5, 0 @ I+BTB cache invalidate
|
|
#endif
|
|
dsb
|
|
#ifdef CONFIG_MMU
|
|
mcr p15, 0, r10, c8, c7, 0 @ invalidate I + D TLBs
|
|
mcr p15, 0, r10, c2, c0, 2 @ TTB control register
|
|
orr r4, r4, #TTB_FLAGS
|
|
mcr p15, 0, r4, c2, c0, 1 @ load TTB1
|
|
mov r10, #0x1f @ domains 0, 1 = manager
|
|
mcr p15, 0, r10, c3, c0, 0 @ load domain access register
|
|
#endif
|
|
ldr r5, =0xff0aa1a8
|
|
ldr r6, =0x40e040e0
|
|
mcr p15, 0, r5, c10, c2, 0 @ write PRRR
|
|
mcr p15, 0, r6, c10, c2, 1 @ write NMRR
|
|
adr r5, v7_crval
|
|
ldmia r5, {r5, r6}
|
|
mrc p15, 0, r0, c1, c0, 0 @ read control register
|
|
bic r0, r0, r5 @ clear bits them
|
|
orr r0, r0, r6 @ set them
|
|
mov pc, lr @ return to head.S:__ret
|
|
ENDPROC(__v7_setup)
|
|
|
|
/* AT
|
|
* TFR EV X F I D LR S
|
|
* .EEE ..EE PUI. .T.T 4RVI ZWRS BLDP WCAM
|
|
* rxxx rrxx xxx0 0101 xxxx xxxx x111 xxxx < forced
|
|
* 1 0 110 0011 1100 .111 1101 < we want
|
|
*/
|
|
.type v7_crval, #object
|
|
v7_crval:
|
|
crval clear=0x0120c302, mmuset=0x10c03c7d, ucset=0x00c01c7c
|
|
|
|
__v7_setup_stack:
|
|
.space 4 * 11 @ 11 registers
|
|
|
|
.type v7_processor_functions, #object
|
|
ENTRY(v7_processor_functions)
|
|
.word v7_early_abort
|
|
.word pabort_ifar
|
|
.word cpu_v7_proc_init
|
|
.word cpu_v7_proc_fin
|
|
.word cpu_v7_reset
|
|
.word cpu_v7_do_idle
|
|
.word cpu_v7_dcache_clean_area
|
|
.word cpu_v7_switch_mm
|
|
.word cpu_v7_set_pte_ext
|
|
.size v7_processor_functions, . - v7_processor_functions
|
|
|
|
.type cpu_arch_name, #object
|
|
cpu_arch_name:
|
|
.asciz "armv7"
|
|
.size cpu_arch_name, . - cpu_arch_name
|
|
|
|
.type cpu_elf_name, #object
|
|
cpu_elf_name:
|
|
.asciz "v7"
|
|
.size cpu_elf_name, . - cpu_elf_name
|
|
.align
|
|
|
|
.section ".proc.info.init", #alloc, #execinstr
|
|
|
|
/*
|
|
* Match any ARMv7 processor core.
|
|
*/
|
|
.type __v7_proc_info, #object
|
|
__v7_proc_info:
|
|
.long 0x000f0000 @ Required ID value
|
|
.long 0x000f0000 @ Mask for ID
|
|
.long PMD_TYPE_SECT | \
|
|
PMD_SECT_BUFFERABLE | \
|
|
PMD_SECT_CACHEABLE | \
|
|
PMD_SECT_AP_WRITE | \
|
|
PMD_SECT_AP_READ
|
|
.long PMD_TYPE_SECT | \
|
|
PMD_SECT_XN | \
|
|
PMD_SECT_AP_WRITE | \
|
|
PMD_SECT_AP_READ
|
|
b __v7_setup
|
|
.long cpu_arch_name
|
|
.long cpu_elf_name
|
|
.long HWCAP_SWP|HWCAP_HALF|HWCAP_THUMB|HWCAP_FAST_MULT|HWCAP_EDSP
|
|
.long cpu_v7_name
|
|
.long v7_processor_functions
|
|
.long v7wbi_tlb_fns
|
|
.long v6_user_fns
|
|
.long v7_cache_fns
|
|
.size __v7_proc_info, . - __v7_proc_info
|