mirror of
https://github.com/edk2-porting/linux-next.git
synced 2024-12-26 22:24:09 +08:00
20b4e4fa84
The "atmel,at91rm9200-sdramc" was missing from binding documentation. Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> Acked-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
100 lines
2.9 KiB
Plaintext
100 lines
2.9 KiB
Plaintext
Atmel AT91 device tree bindings.
|
|
================================
|
|
|
|
PIT Timer required properties:
|
|
- compatible: Should be "atmel,at91sam9260-pit"
|
|
- reg: Should contain registers location and length
|
|
- interrupts: Should contain interrupt for the PIT which is the IRQ line
|
|
shared across all System Controller members.
|
|
|
|
System Timer (ST) required properties:
|
|
- compatible: Should be "atmel,at91rm9200-st"
|
|
- reg: Should contain registers location and length
|
|
- interrupts: Should contain interrupt for the ST which is the IRQ line
|
|
shared across all System Controller members.
|
|
|
|
TC/TCLIB Timer required properties:
|
|
- compatible: Should be "atmel,<chip>-tcb".
|
|
<chip> can be "at91rm9200" or "at91sam9x5"
|
|
- reg: Should contain registers location and length
|
|
- interrupts: Should contain all interrupts for the TC block
|
|
Note that you can specify several interrupt cells if the TC
|
|
block has one interrupt per channel.
|
|
|
|
Examples:
|
|
|
|
One interrupt per TC block:
|
|
tcb0: timer@fff7c000 {
|
|
compatible = "atmel,at91rm9200-tcb";
|
|
reg = <0xfff7c000 0x100>;
|
|
interrupts = <18 4>;
|
|
};
|
|
|
|
One interrupt per TC channel in a TC block:
|
|
tcb1: timer@fffdc000 {
|
|
compatible = "atmel,at91rm9200-tcb";
|
|
reg = <0xfffdc000 0x100>;
|
|
interrupts = <26 4 27 4 28 4>;
|
|
};
|
|
|
|
RSTC Reset Controller required properties:
|
|
- compatible: Should be "atmel,<chip>-rstc".
|
|
<chip> can be "at91sam9260" or "at91sam9g45"
|
|
- reg: Should contain registers location and length
|
|
|
|
Example:
|
|
|
|
rstc@fffffd00 {
|
|
compatible = "atmel,at91sam9260-rstc";
|
|
reg = <0xfffffd00 0x10>;
|
|
};
|
|
|
|
RAMC SDRAM/DDR Controller required properties:
|
|
- compatible: Should be "atmel,at91rm9200-sdramc",
|
|
"atmel,at91sam9260-sdramc",
|
|
"atmel,at91sam9g45-ddramc",
|
|
- reg: Should contain registers location and length
|
|
For at91sam9263 and at91sam9g45 you must specify 2 entries.
|
|
|
|
Examples:
|
|
|
|
ramc0: ramc@ffffe800 {
|
|
compatible = "atmel,at91sam9g45-ddramc";
|
|
reg = <0xffffe800 0x200>;
|
|
};
|
|
|
|
ramc0: ramc@ffffe400 {
|
|
compatible = "atmel,at91sam9g45-ddramc";
|
|
reg = <0xffffe400 0x200
|
|
0xffffe600 0x200>;
|
|
};
|
|
|
|
SHDWC Shutdown Controller
|
|
|
|
required properties:
|
|
- compatible: Should be "atmel,<chip>-shdwc".
|
|
<chip> can be "at91sam9260", "at91sam9rl" or "at91sam9x5".
|
|
- reg: Should contain registers location and length
|
|
|
|
optional properties:
|
|
- atmel,wakeup-mode: String, operation mode of the wakeup mode.
|
|
Supported values are: "none", "high", "low", "any".
|
|
- atmel,wakeup-counter: Counter on Wake-up 0 (between 0x0 and 0xf).
|
|
|
|
optional at91sam9260 properties:
|
|
- atmel,wakeup-rtt-timer: boolean to enable Real-time Timer Wake-up.
|
|
|
|
optional at91sam9rl properties:
|
|
- atmel,wakeup-rtc-timer: boolean to enable Real-time Clock Wake-up.
|
|
- atmel,wakeup-rtt-timer: boolean to enable Real-time Timer Wake-up.
|
|
|
|
optional at91sam9x5 properties:
|
|
- atmel,wakeup-rtc-timer: boolean to enable Real-time Clock Wake-up.
|
|
|
|
Example:
|
|
|
|
rstc@fffffd00 {
|
|
compatible = "atmel,at91sam9260-rstc";
|
|
reg = <0xfffffd00 0x10>;
|
|
};
|