mirror of
https://github.com/edk2-porting/linux-next.git
synced 2024-12-25 21:54:06 +08:00
71d94fe842
The bits are generic to CPM devices, so let's move them to the common header file, so drivers won't need to privately reintroduce another bunch of the same bits (as we can't include cpm2.h header together with cpm1.h). Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
1150 lines
48 KiB
C
1150 lines
48 KiB
C
/*
|
|
* Communication Processor Module v2.
|
|
*
|
|
* This file contains structures and information for the communication
|
|
* processor channels found in the dual port RAM or parameter RAM.
|
|
* All CPM control and status is available through the CPM2 internal
|
|
* memory map. See immap_cpm2.h for details.
|
|
*/
|
|
#ifdef __KERNEL__
|
|
#ifndef __CPM2__
|
|
#define __CPM2__
|
|
|
|
#include <asm/immap_cpm2.h>
|
|
#include <asm/cpm.h>
|
|
#include <sysdev/fsl_soc.h>
|
|
|
|
/* CPM Command register.
|
|
*/
|
|
#define CPM_CR_RST ((uint)0x80000000)
|
|
#define CPM_CR_PAGE ((uint)0x7c000000)
|
|
#define CPM_CR_SBLOCK ((uint)0x03e00000)
|
|
#define CPM_CR_FLG ((uint)0x00010000)
|
|
#define CPM_CR_MCN ((uint)0x00003fc0)
|
|
#define CPM_CR_OPCODE ((uint)0x0000000f)
|
|
|
|
/* Device sub-block and page codes.
|
|
*/
|
|
#define CPM_CR_SCC1_SBLOCK (0x04)
|
|
#define CPM_CR_SCC2_SBLOCK (0x05)
|
|
#define CPM_CR_SCC3_SBLOCK (0x06)
|
|
#define CPM_CR_SCC4_SBLOCK (0x07)
|
|
#define CPM_CR_SMC1_SBLOCK (0x08)
|
|
#define CPM_CR_SMC2_SBLOCK (0x09)
|
|
#define CPM_CR_SPI_SBLOCK (0x0a)
|
|
#define CPM_CR_I2C_SBLOCK (0x0b)
|
|
#define CPM_CR_TIMER_SBLOCK (0x0f)
|
|
#define CPM_CR_RAND_SBLOCK (0x0e)
|
|
#define CPM_CR_FCC1_SBLOCK (0x10)
|
|
#define CPM_CR_FCC2_SBLOCK (0x11)
|
|
#define CPM_CR_FCC3_SBLOCK (0x12)
|
|
#define CPM_CR_IDMA1_SBLOCK (0x14)
|
|
#define CPM_CR_IDMA2_SBLOCK (0x15)
|
|
#define CPM_CR_IDMA3_SBLOCK (0x16)
|
|
#define CPM_CR_IDMA4_SBLOCK (0x17)
|
|
#define CPM_CR_MCC1_SBLOCK (0x1c)
|
|
|
|
#define CPM_CR_FCC_SBLOCK(x) (x + 0x10)
|
|
|
|
#define CPM_CR_SCC1_PAGE (0x00)
|
|
#define CPM_CR_SCC2_PAGE (0x01)
|
|
#define CPM_CR_SCC3_PAGE (0x02)
|
|
#define CPM_CR_SCC4_PAGE (0x03)
|
|
#define CPM_CR_SMC1_PAGE (0x07)
|
|
#define CPM_CR_SMC2_PAGE (0x08)
|
|
#define CPM_CR_SPI_PAGE (0x09)
|
|
#define CPM_CR_I2C_PAGE (0x0a)
|
|
#define CPM_CR_TIMER_PAGE (0x0a)
|
|
#define CPM_CR_RAND_PAGE (0x0a)
|
|
#define CPM_CR_FCC1_PAGE (0x04)
|
|
#define CPM_CR_FCC2_PAGE (0x05)
|
|
#define CPM_CR_FCC3_PAGE (0x06)
|
|
#define CPM_CR_IDMA1_PAGE (0x07)
|
|
#define CPM_CR_IDMA2_PAGE (0x08)
|
|
#define CPM_CR_IDMA3_PAGE (0x09)
|
|
#define CPM_CR_IDMA4_PAGE (0x0a)
|
|
#define CPM_CR_MCC1_PAGE (0x07)
|
|
#define CPM_CR_MCC2_PAGE (0x08)
|
|
|
|
#define CPM_CR_FCC_PAGE(x) (x + 0x04)
|
|
|
|
/* CPM2-specific opcodes (see cpm.h for common opcodes)
|
|
*/
|
|
#define CPM_CR_START_IDMA ((ushort)0x0009)
|
|
|
|
#define mk_cr_cmd(PG, SBC, MCN, OP) \
|
|
((PG << 26) | (SBC << 21) | (MCN << 6) | OP)
|
|
|
|
/* The number of pages of host memory we allocate for CPM. This is
|
|
* done early in kernel initialization to get physically contiguous
|
|
* pages.
|
|
*/
|
|
#define NUM_CPM_HOST_PAGES 2
|
|
|
|
/* Export the base address of the communication processor registers
|
|
* and dual port ram.
|
|
*/
|
|
extern cpm_cpm2_t __iomem *cpmp; /* Pointer to comm processor */
|
|
|
|
#define cpm_dpalloc cpm_muram_alloc
|
|
#define cpm_dpfree cpm_muram_free
|
|
#define cpm_dpram_addr cpm_muram_addr
|
|
|
|
extern void cpm2_reset(void);
|
|
|
|
/* Baud rate generators.
|
|
*/
|
|
#define CPM_BRG_RST ((uint)0x00020000)
|
|
#define CPM_BRG_EN ((uint)0x00010000)
|
|
#define CPM_BRG_EXTC_INT ((uint)0x00000000)
|
|
#define CPM_BRG_EXTC_CLK3_9 ((uint)0x00004000)
|
|
#define CPM_BRG_EXTC_CLK5_15 ((uint)0x00008000)
|
|
#define CPM_BRG_ATB ((uint)0x00002000)
|
|
#define CPM_BRG_CD_MASK ((uint)0x00001ffe)
|
|
#define CPM_BRG_DIV16 ((uint)0x00000001)
|
|
|
|
#define CPM2_BRG_INT_CLK (get_brgfreq())
|
|
#define CPM2_BRG_UART_CLK (CPM2_BRG_INT_CLK/16)
|
|
|
|
extern void __cpm2_setbrg(uint brg, uint rate, uint clk, int div16, int src);
|
|
|
|
/* This function is used by UARTS, or anything else that uses a 16x
|
|
* oversampled clock.
|
|
*/
|
|
static inline void cpm_setbrg(uint brg, uint rate)
|
|
{
|
|
__cpm2_setbrg(brg, rate, CPM2_BRG_UART_CLK, 0, CPM_BRG_EXTC_INT);
|
|
}
|
|
|
|
/* This function is used to set high speed synchronous baud rate
|
|
* clocks.
|
|
*/
|
|
static inline void cpm2_fastbrg(uint brg, uint rate, int div16)
|
|
{
|
|
__cpm2_setbrg(brg, rate, CPM2_BRG_INT_CLK, div16, CPM_BRG_EXTC_INT);
|
|
}
|
|
|
|
/* Parameter RAM offsets from the base.
|
|
*/
|
|
#define PROFF_SCC1 ((uint)0x8000)
|
|
#define PROFF_SCC2 ((uint)0x8100)
|
|
#define PROFF_SCC3 ((uint)0x8200)
|
|
#define PROFF_SCC4 ((uint)0x8300)
|
|
#define PROFF_FCC1 ((uint)0x8400)
|
|
#define PROFF_FCC2 ((uint)0x8500)
|
|
#define PROFF_FCC3 ((uint)0x8600)
|
|
#define PROFF_MCC1 ((uint)0x8700)
|
|
#define PROFF_SMC1_BASE ((uint)0x87fc)
|
|
#define PROFF_IDMA1_BASE ((uint)0x87fe)
|
|
#define PROFF_MCC2 ((uint)0x8800)
|
|
#define PROFF_SMC2_BASE ((uint)0x88fc)
|
|
#define PROFF_IDMA2_BASE ((uint)0x88fe)
|
|
#define PROFF_SPI_BASE ((uint)0x89fc)
|
|
#define PROFF_IDMA3_BASE ((uint)0x89fe)
|
|
#define PROFF_TIMERS ((uint)0x8ae0)
|
|
#define PROFF_REVNUM ((uint)0x8af0)
|
|
#define PROFF_RAND ((uint)0x8af8)
|
|
#define PROFF_I2C_BASE ((uint)0x8afc)
|
|
#define PROFF_IDMA4_BASE ((uint)0x8afe)
|
|
|
|
#define PROFF_SCC_SIZE ((uint)0x100)
|
|
#define PROFF_FCC_SIZE ((uint)0x100)
|
|
#define PROFF_SMC_SIZE ((uint)64)
|
|
|
|
/* The SMCs are relocated to any of the first eight DPRAM pages.
|
|
* We will fix these at the first locations of DPRAM, until we
|
|
* get some microcode patches :-).
|
|
* The parameter ram space for the SMCs is fifty-some bytes, and
|
|
* they are required to start on a 64 byte boundary.
|
|
*/
|
|
#define PROFF_SMC1 (0)
|
|
#define PROFF_SMC2 (64)
|
|
|
|
|
|
/* Define enough so I can at least use the serial port as a UART.
|
|
*/
|
|
typedef struct smc_uart {
|
|
ushort smc_rbase; /* Rx Buffer descriptor base address */
|
|
ushort smc_tbase; /* Tx Buffer descriptor base address */
|
|
u_char smc_rfcr; /* Rx function code */
|
|
u_char smc_tfcr; /* Tx function code */
|
|
ushort smc_mrblr; /* Max receive buffer length */
|
|
uint smc_rstate; /* Internal */
|
|
uint smc_idp; /* Internal */
|
|
ushort smc_rbptr; /* Internal */
|
|
ushort smc_ibc; /* Internal */
|
|
uint smc_rxtmp; /* Internal */
|
|
uint smc_tstate; /* Internal */
|
|
uint smc_tdp; /* Internal */
|
|
ushort smc_tbptr; /* Internal */
|
|
ushort smc_tbc; /* Internal */
|
|
uint smc_txtmp; /* Internal */
|
|
ushort smc_maxidl; /* Maximum idle characters */
|
|
ushort smc_tmpidl; /* Temporary idle counter */
|
|
ushort smc_brklen; /* Last received break length */
|
|
ushort smc_brkec; /* rcv'd break condition counter */
|
|
ushort smc_brkcr; /* xmt break count register */
|
|
ushort smc_rmask; /* Temporary bit mask */
|
|
uint smc_stmp; /* SDMA Temp */
|
|
} smc_uart_t;
|
|
|
|
/* SMC uart mode register (Internal memory map).
|
|
*/
|
|
#define SMCMR_REN ((ushort)0x0001)
|
|
#define SMCMR_TEN ((ushort)0x0002)
|
|
#define SMCMR_DM ((ushort)0x000c)
|
|
#define SMCMR_SM_GCI ((ushort)0x0000)
|
|
#define SMCMR_SM_UART ((ushort)0x0020)
|
|
#define SMCMR_SM_TRANS ((ushort)0x0030)
|
|
#define SMCMR_SM_MASK ((ushort)0x0030)
|
|
#define SMCMR_PM_EVEN ((ushort)0x0100) /* Even parity, else odd */
|
|
#define SMCMR_REVD SMCMR_PM_EVEN
|
|
#define SMCMR_PEN ((ushort)0x0200) /* Parity enable */
|
|
#define SMCMR_BS SMCMR_PEN
|
|
#define SMCMR_SL ((ushort)0x0400) /* Two stops, else one */
|
|
#define SMCR_CLEN_MASK ((ushort)0x7800) /* Character length */
|
|
#define smcr_mk_clen(C) (((C) << 11) & SMCR_CLEN_MASK)
|
|
|
|
/* SMC Event and Mask register.
|
|
*/
|
|
#define SMCM_BRKE ((unsigned char)0x40) /* When in UART Mode */
|
|
#define SMCM_BRK ((unsigned char)0x10) /* When in UART Mode */
|
|
#define SMCM_TXE ((unsigned char)0x10)
|
|
#define SMCM_BSY ((unsigned char)0x04)
|
|
#define SMCM_TX ((unsigned char)0x02)
|
|
#define SMCM_RX ((unsigned char)0x01)
|
|
|
|
/* SCCs.
|
|
*/
|
|
#define SCC_GSMRH_IRP ((uint)0x00040000)
|
|
#define SCC_GSMRH_GDE ((uint)0x00010000)
|
|
#define SCC_GSMRH_TCRC_CCITT ((uint)0x00008000)
|
|
#define SCC_GSMRH_TCRC_BISYNC ((uint)0x00004000)
|
|
#define SCC_GSMRH_TCRC_HDLC ((uint)0x00000000)
|
|
#define SCC_GSMRH_REVD ((uint)0x00002000)
|
|
#define SCC_GSMRH_TRX ((uint)0x00001000)
|
|
#define SCC_GSMRH_TTX ((uint)0x00000800)
|
|
#define SCC_GSMRH_CDP ((uint)0x00000400)
|
|
#define SCC_GSMRH_CTSP ((uint)0x00000200)
|
|
#define SCC_GSMRH_CDS ((uint)0x00000100)
|
|
#define SCC_GSMRH_CTSS ((uint)0x00000080)
|
|
#define SCC_GSMRH_TFL ((uint)0x00000040)
|
|
#define SCC_GSMRH_RFW ((uint)0x00000020)
|
|
#define SCC_GSMRH_TXSY ((uint)0x00000010)
|
|
#define SCC_GSMRH_SYNL16 ((uint)0x0000000c)
|
|
#define SCC_GSMRH_SYNL8 ((uint)0x00000008)
|
|
#define SCC_GSMRH_SYNL4 ((uint)0x00000004)
|
|
#define SCC_GSMRH_RTSM ((uint)0x00000002)
|
|
#define SCC_GSMRH_RSYN ((uint)0x00000001)
|
|
|
|
#define SCC_GSMRL_SIR ((uint)0x80000000) /* SCC2 only */
|
|
#define SCC_GSMRL_EDGE_NONE ((uint)0x60000000)
|
|
#define SCC_GSMRL_EDGE_NEG ((uint)0x40000000)
|
|
#define SCC_GSMRL_EDGE_POS ((uint)0x20000000)
|
|
#define SCC_GSMRL_EDGE_BOTH ((uint)0x00000000)
|
|
#define SCC_GSMRL_TCI ((uint)0x10000000)
|
|
#define SCC_GSMRL_TSNC_3 ((uint)0x0c000000)
|
|
#define SCC_GSMRL_TSNC_4 ((uint)0x08000000)
|
|
#define SCC_GSMRL_TSNC_14 ((uint)0x04000000)
|
|
#define SCC_GSMRL_TSNC_INF ((uint)0x00000000)
|
|
#define SCC_GSMRL_RINV ((uint)0x02000000)
|
|
#define SCC_GSMRL_TINV ((uint)0x01000000)
|
|
#define SCC_GSMRL_TPL_128 ((uint)0x00c00000)
|
|
#define SCC_GSMRL_TPL_64 ((uint)0x00a00000)
|
|
#define SCC_GSMRL_TPL_48 ((uint)0x00800000)
|
|
#define SCC_GSMRL_TPL_32 ((uint)0x00600000)
|
|
#define SCC_GSMRL_TPL_16 ((uint)0x00400000)
|
|
#define SCC_GSMRL_TPL_8 ((uint)0x00200000)
|
|
#define SCC_GSMRL_TPL_NONE ((uint)0x00000000)
|
|
#define SCC_GSMRL_TPP_ALL1 ((uint)0x00180000)
|
|
#define SCC_GSMRL_TPP_01 ((uint)0x00100000)
|
|
#define SCC_GSMRL_TPP_10 ((uint)0x00080000)
|
|
#define SCC_GSMRL_TPP_ZEROS ((uint)0x00000000)
|
|
#define SCC_GSMRL_TEND ((uint)0x00040000)
|
|
#define SCC_GSMRL_TDCR_32 ((uint)0x00030000)
|
|
#define SCC_GSMRL_TDCR_16 ((uint)0x00020000)
|
|
#define SCC_GSMRL_TDCR_8 ((uint)0x00010000)
|
|
#define SCC_GSMRL_TDCR_1 ((uint)0x00000000)
|
|
#define SCC_GSMRL_RDCR_32 ((uint)0x0000c000)
|
|
#define SCC_GSMRL_RDCR_16 ((uint)0x00008000)
|
|
#define SCC_GSMRL_RDCR_8 ((uint)0x00004000)
|
|
#define SCC_GSMRL_RDCR_1 ((uint)0x00000000)
|
|
#define SCC_GSMRL_RENC_DFMAN ((uint)0x00003000)
|
|
#define SCC_GSMRL_RENC_MANCH ((uint)0x00002000)
|
|
#define SCC_GSMRL_RENC_FM0 ((uint)0x00001000)
|
|
#define SCC_GSMRL_RENC_NRZI ((uint)0x00000800)
|
|
#define SCC_GSMRL_RENC_NRZ ((uint)0x00000000)
|
|
#define SCC_GSMRL_TENC_DFMAN ((uint)0x00000600)
|
|
#define SCC_GSMRL_TENC_MANCH ((uint)0x00000400)
|
|
#define SCC_GSMRL_TENC_FM0 ((uint)0x00000200)
|
|
#define SCC_GSMRL_TENC_NRZI ((uint)0x00000100)
|
|
#define SCC_GSMRL_TENC_NRZ ((uint)0x00000000)
|
|
#define SCC_GSMRL_DIAG_LE ((uint)0x000000c0) /* Loop and echo */
|
|
#define SCC_GSMRL_DIAG_ECHO ((uint)0x00000080)
|
|
#define SCC_GSMRL_DIAG_LOOP ((uint)0x00000040)
|
|
#define SCC_GSMRL_DIAG_NORM ((uint)0x00000000)
|
|
#define SCC_GSMRL_ENR ((uint)0x00000020)
|
|
#define SCC_GSMRL_ENT ((uint)0x00000010)
|
|
#define SCC_GSMRL_MODE_ENET ((uint)0x0000000c)
|
|
#define SCC_GSMRL_MODE_DDCMP ((uint)0x00000009)
|
|
#define SCC_GSMRL_MODE_BISYNC ((uint)0x00000008)
|
|
#define SCC_GSMRL_MODE_V14 ((uint)0x00000007)
|
|
#define SCC_GSMRL_MODE_AHDLC ((uint)0x00000006)
|
|
#define SCC_GSMRL_MODE_PROFIBUS ((uint)0x00000005)
|
|
#define SCC_GSMRL_MODE_UART ((uint)0x00000004)
|
|
#define SCC_GSMRL_MODE_SS7 ((uint)0x00000003)
|
|
#define SCC_GSMRL_MODE_ATALK ((uint)0x00000002)
|
|
#define SCC_GSMRL_MODE_HDLC ((uint)0x00000000)
|
|
|
|
#define SCC_TODR_TOD ((ushort)0x8000)
|
|
|
|
/* SCC Event and Mask register.
|
|
*/
|
|
#define SCCM_TXE ((unsigned char)0x10)
|
|
#define SCCM_BSY ((unsigned char)0x04)
|
|
#define SCCM_TX ((unsigned char)0x02)
|
|
#define SCCM_RX ((unsigned char)0x01)
|
|
|
|
typedef struct scc_param {
|
|
ushort scc_rbase; /* Rx Buffer descriptor base address */
|
|
ushort scc_tbase; /* Tx Buffer descriptor base address */
|
|
u_char scc_rfcr; /* Rx function code */
|
|
u_char scc_tfcr; /* Tx function code */
|
|
ushort scc_mrblr; /* Max receive buffer length */
|
|
uint scc_rstate; /* Internal */
|
|
uint scc_idp; /* Internal */
|
|
ushort scc_rbptr; /* Internal */
|
|
ushort scc_ibc; /* Internal */
|
|
uint scc_rxtmp; /* Internal */
|
|
uint scc_tstate; /* Internal */
|
|
uint scc_tdp; /* Internal */
|
|
ushort scc_tbptr; /* Internal */
|
|
ushort scc_tbc; /* Internal */
|
|
uint scc_txtmp; /* Internal */
|
|
uint scc_rcrc; /* Internal */
|
|
uint scc_tcrc; /* Internal */
|
|
} sccp_t;
|
|
|
|
/* Function code bits.
|
|
*/
|
|
#define SCC_EB ((u_char) 0x10) /* Set big endian byte order */
|
|
#define SCC_GBL ((u_char) 0x20) /* Snooping enabled */
|
|
|
|
/* CPM Ethernet through SCC1.
|
|
*/
|
|
typedef struct scc_enet {
|
|
sccp_t sen_genscc;
|
|
uint sen_cpres; /* Preset CRC */
|
|
uint sen_cmask; /* Constant mask for CRC */
|
|
uint sen_crcec; /* CRC Error counter */
|
|
uint sen_alec; /* alignment error counter */
|
|
uint sen_disfc; /* discard frame counter */
|
|
ushort sen_pads; /* Tx short frame pad character */
|
|
ushort sen_retlim; /* Retry limit threshold */
|
|
ushort sen_retcnt; /* Retry limit counter */
|
|
ushort sen_maxflr; /* maximum frame length register */
|
|
ushort sen_minflr; /* minimum frame length register */
|
|
ushort sen_maxd1; /* maximum DMA1 length */
|
|
ushort sen_maxd2; /* maximum DMA2 length */
|
|
ushort sen_maxd; /* Rx max DMA */
|
|
ushort sen_dmacnt; /* Rx DMA counter */
|
|
ushort sen_maxb; /* Max BD byte count */
|
|
ushort sen_gaddr1; /* Group address filter */
|
|
ushort sen_gaddr2;
|
|
ushort sen_gaddr3;
|
|
ushort sen_gaddr4;
|
|
uint sen_tbuf0data0; /* Save area 0 - current frame */
|
|
uint sen_tbuf0data1; /* Save area 1 - current frame */
|
|
uint sen_tbuf0rba; /* Internal */
|
|
uint sen_tbuf0crc; /* Internal */
|
|
ushort sen_tbuf0bcnt; /* Internal */
|
|
ushort sen_paddrh; /* physical address (MSB) */
|
|
ushort sen_paddrm;
|
|
ushort sen_paddrl; /* physical address (LSB) */
|
|
ushort sen_pper; /* persistence */
|
|
ushort sen_rfbdptr; /* Rx first BD pointer */
|
|
ushort sen_tfbdptr; /* Tx first BD pointer */
|
|
ushort sen_tlbdptr; /* Tx last BD pointer */
|
|
uint sen_tbuf1data0; /* Save area 0 - current frame */
|
|
uint sen_tbuf1data1; /* Save area 1 - current frame */
|
|
uint sen_tbuf1rba; /* Internal */
|
|
uint sen_tbuf1crc; /* Internal */
|
|
ushort sen_tbuf1bcnt; /* Internal */
|
|
ushort sen_txlen; /* Tx Frame length counter */
|
|
ushort sen_iaddr1; /* Individual address filter */
|
|
ushort sen_iaddr2;
|
|
ushort sen_iaddr3;
|
|
ushort sen_iaddr4;
|
|
ushort sen_boffcnt; /* Backoff counter */
|
|
|
|
/* NOTE: Some versions of the manual have the following items
|
|
* incorrectly documented. Below is the proper order.
|
|
*/
|
|
ushort sen_taddrh; /* temp address (MSB) */
|
|
ushort sen_taddrm;
|
|
ushort sen_taddrl; /* temp address (LSB) */
|
|
} scc_enet_t;
|
|
|
|
|
|
/* SCC Event register as used by Ethernet.
|
|
*/
|
|
#define SCCE_ENET_GRA ((ushort)0x0080) /* Graceful stop complete */
|
|
#define SCCE_ENET_TXE ((ushort)0x0010) /* Transmit Error */
|
|
#define SCCE_ENET_RXF ((ushort)0x0008) /* Full frame received */
|
|
#define SCCE_ENET_BSY ((ushort)0x0004) /* All incoming buffers full */
|
|
#define SCCE_ENET_TXB ((ushort)0x0002) /* A buffer was transmitted */
|
|
#define SCCE_ENET_RXB ((ushort)0x0001) /* A buffer was received */
|
|
|
|
/* SCC Mode Register (PSMR) as used by Ethernet.
|
|
*/
|
|
#define SCC_PSMR_HBC ((ushort)0x8000) /* Enable heartbeat */
|
|
#define SCC_PSMR_FC ((ushort)0x4000) /* Force collision */
|
|
#define SCC_PSMR_RSH ((ushort)0x2000) /* Receive short frames */
|
|
#define SCC_PSMR_IAM ((ushort)0x1000) /* Check individual hash */
|
|
#define SCC_PSMR_ENCRC ((ushort)0x0800) /* Ethernet CRC mode */
|
|
#define SCC_PSMR_PRO ((ushort)0x0200) /* Promiscuous mode */
|
|
#define SCC_PSMR_BRO ((ushort)0x0100) /* Catch broadcast pkts */
|
|
#define SCC_PSMR_SBT ((ushort)0x0080) /* Special backoff timer */
|
|
#define SCC_PSMR_LPB ((ushort)0x0040) /* Set Loopback mode */
|
|
#define SCC_PSMR_SIP ((ushort)0x0020) /* Sample Input Pins */
|
|
#define SCC_PSMR_LCW ((ushort)0x0010) /* Late collision window */
|
|
#define SCC_PSMR_NIB22 ((ushort)0x000a) /* Start frame search */
|
|
#define SCC_PSMR_FDE ((ushort)0x0001) /* Full duplex enable */
|
|
|
|
/* SCC as UART
|
|
*/
|
|
typedef struct scc_uart {
|
|
sccp_t scc_genscc;
|
|
uint scc_res1; /* Reserved */
|
|
uint scc_res2; /* Reserved */
|
|
ushort scc_maxidl; /* Maximum idle chars */
|
|
ushort scc_idlc; /* temp idle counter */
|
|
ushort scc_brkcr; /* Break count register */
|
|
ushort scc_parec; /* receive parity error counter */
|
|
ushort scc_frmec; /* receive framing error counter */
|
|
ushort scc_nosec; /* receive noise counter */
|
|
ushort scc_brkec; /* receive break condition counter */
|
|
ushort scc_brkln; /* last received break length */
|
|
ushort scc_uaddr1; /* UART address character 1 */
|
|
ushort scc_uaddr2; /* UART address character 2 */
|
|
ushort scc_rtemp; /* Temp storage */
|
|
ushort scc_toseq; /* Transmit out of sequence char */
|
|
ushort scc_char1; /* control character 1 */
|
|
ushort scc_char2; /* control character 2 */
|
|
ushort scc_char3; /* control character 3 */
|
|
ushort scc_char4; /* control character 4 */
|
|
ushort scc_char5; /* control character 5 */
|
|
ushort scc_char6; /* control character 6 */
|
|
ushort scc_char7; /* control character 7 */
|
|
ushort scc_char8; /* control character 8 */
|
|
ushort scc_rccm; /* receive control character mask */
|
|
ushort scc_rccr; /* receive control character register */
|
|
ushort scc_rlbc; /* receive last break character */
|
|
} scc_uart_t;
|
|
|
|
/* SCC Event and Mask registers when it is used as a UART.
|
|
*/
|
|
#define UART_SCCM_GLR ((ushort)0x1000)
|
|
#define UART_SCCM_GLT ((ushort)0x0800)
|
|
#define UART_SCCM_AB ((ushort)0x0200)
|
|
#define UART_SCCM_IDL ((ushort)0x0100)
|
|
#define UART_SCCM_GRA ((ushort)0x0080)
|
|
#define UART_SCCM_BRKE ((ushort)0x0040)
|
|
#define UART_SCCM_BRKS ((ushort)0x0020)
|
|
#define UART_SCCM_CCR ((ushort)0x0008)
|
|
#define UART_SCCM_BSY ((ushort)0x0004)
|
|
#define UART_SCCM_TX ((ushort)0x0002)
|
|
#define UART_SCCM_RX ((ushort)0x0001)
|
|
|
|
/* The SCC PSMR when used as a UART.
|
|
*/
|
|
#define SCU_PSMR_FLC ((ushort)0x8000)
|
|
#define SCU_PSMR_SL ((ushort)0x4000)
|
|
#define SCU_PSMR_CL ((ushort)0x3000)
|
|
#define SCU_PSMR_UM ((ushort)0x0c00)
|
|
#define SCU_PSMR_FRZ ((ushort)0x0200)
|
|
#define SCU_PSMR_RZS ((ushort)0x0100)
|
|
#define SCU_PSMR_SYN ((ushort)0x0080)
|
|
#define SCU_PSMR_DRT ((ushort)0x0040)
|
|
#define SCU_PSMR_PEN ((ushort)0x0010)
|
|
#define SCU_PSMR_RPM ((ushort)0x000c)
|
|
#define SCU_PSMR_REVP ((ushort)0x0008)
|
|
#define SCU_PSMR_TPM ((ushort)0x0003)
|
|
#define SCU_PSMR_TEVP ((ushort)0x0002)
|
|
|
|
/* CPM Transparent mode SCC.
|
|
*/
|
|
typedef struct scc_trans {
|
|
sccp_t st_genscc;
|
|
uint st_cpres; /* Preset CRC */
|
|
uint st_cmask; /* Constant mask for CRC */
|
|
} scc_trans_t;
|
|
|
|
/* How about some FCCs.....
|
|
*/
|
|
#define FCC_GFMR_DIAG_NORM ((uint)0x00000000)
|
|
#define FCC_GFMR_DIAG_LE ((uint)0x40000000)
|
|
#define FCC_GFMR_DIAG_AE ((uint)0x80000000)
|
|
#define FCC_GFMR_DIAG_ALE ((uint)0xc0000000)
|
|
#define FCC_GFMR_TCI ((uint)0x20000000)
|
|
#define FCC_GFMR_TRX ((uint)0x10000000)
|
|
#define FCC_GFMR_TTX ((uint)0x08000000)
|
|
#define FCC_GFMR_TTX ((uint)0x08000000)
|
|
#define FCC_GFMR_CDP ((uint)0x04000000)
|
|
#define FCC_GFMR_CTSP ((uint)0x02000000)
|
|
#define FCC_GFMR_CDS ((uint)0x01000000)
|
|
#define FCC_GFMR_CTSS ((uint)0x00800000)
|
|
#define FCC_GFMR_SYNL_NONE ((uint)0x00000000)
|
|
#define FCC_GFMR_SYNL_AUTO ((uint)0x00004000)
|
|
#define FCC_GFMR_SYNL_8 ((uint)0x00008000)
|
|
#define FCC_GFMR_SYNL_16 ((uint)0x0000c000)
|
|
#define FCC_GFMR_RTSM ((uint)0x00002000)
|
|
#define FCC_GFMR_RENC_NRZ ((uint)0x00000000)
|
|
#define FCC_GFMR_RENC_NRZI ((uint)0x00000800)
|
|
#define FCC_GFMR_REVD ((uint)0x00000400)
|
|
#define FCC_GFMR_TENC_NRZ ((uint)0x00000000)
|
|
#define FCC_GFMR_TENC_NRZI ((uint)0x00000100)
|
|
#define FCC_GFMR_TCRC_16 ((uint)0x00000000)
|
|
#define FCC_GFMR_TCRC_32 ((uint)0x00000080)
|
|
#define FCC_GFMR_ENR ((uint)0x00000020)
|
|
#define FCC_GFMR_ENT ((uint)0x00000010)
|
|
#define FCC_GFMR_MODE_ENET ((uint)0x0000000c)
|
|
#define FCC_GFMR_MODE_ATM ((uint)0x0000000a)
|
|
#define FCC_GFMR_MODE_HDLC ((uint)0x00000000)
|
|
|
|
/* Generic FCC parameter ram.
|
|
*/
|
|
typedef struct fcc_param {
|
|
ushort fcc_riptr; /* Rx Internal temp pointer */
|
|
ushort fcc_tiptr; /* Tx Internal temp pointer */
|
|
ushort fcc_res1;
|
|
ushort fcc_mrblr; /* Max receive buffer length, mod 32 bytes */
|
|
uint fcc_rstate; /* Upper byte is Func code, must be set */
|
|
uint fcc_rbase; /* Receive BD base */
|
|
ushort fcc_rbdstat; /* RxBD status */
|
|
ushort fcc_rbdlen; /* RxBD down counter */
|
|
uint fcc_rdptr; /* RxBD internal data pointer */
|
|
uint fcc_tstate; /* Upper byte is Func code, must be set */
|
|
uint fcc_tbase; /* Transmit BD base */
|
|
ushort fcc_tbdstat; /* TxBD status */
|
|
ushort fcc_tbdlen; /* TxBD down counter */
|
|
uint fcc_tdptr; /* TxBD internal data pointer */
|
|
uint fcc_rbptr; /* Rx BD Internal buf pointer */
|
|
uint fcc_tbptr; /* Tx BD Internal buf pointer */
|
|
uint fcc_rcrc; /* Rx temp CRC */
|
|
uint fcc_res2;
|
|
uint fcc_tcrc; /* Tx temp CRC */
|
|
} fccp_t;
|
|
|
|
|
|
/* Ethernet controller through FCC.
|
|
*/
|
|
typedef struct fcc_enet {
|
|
fccp_t fen_genfcc;
|
|
uint fen_statbuf; /* Internal status buffer */
|
|
uint fen_camptr; /* CAM address */
|
|
uint fen_cmask; /* Constant mask for CRC */
|
|
uint fen_cpres; /* Preset CRC */
|
|
uint fen_crcec; /* CRC Error counter */
|
|
uint fen_alec; /* alignment error counter */
|
|
uint fen_disfc; /* discard frame counter */
|
|
ushort fen_retlim; /* Retry limit */
|
|
ushort fen_retcnt; /* Retry counter */
|
|
ushort fen_pper; /* Persistence */
|
|
ushort fen_boffcnt; /* backoff counter */
|
|
uint fen_gaddrh; /* Group address filter, high 32-bits */
|
|
uint fen_gaddrl; /* Group address filter, low 32-bits */
|
|
ushort fen_tfcstat; /* out of sequence TxBD */
|
|
ushort fen_tfclen;
|
|
uint fen_tfcptr;
|
|
ushort fen_mflr; /* Maximum frame length (1518) */
|
|
ushort fen_paddrh; /* MAC address */
|
|
ushort fen_paddrm;
|
|
ushort fen_paddrl;
|
|
ushort fen_ibdcount; /* Internal BD counter */
|
|
ushort fen_ibdstart; /* Internal BD start pointer */
|
|
ushort fen_ibdend; /* Internal BD end pointer */
|
|
ushort fen_txlen; /* Internal Tx frame length counter */
|
|
uint fen_ibdbase[8]; /* Internal use */
|
|
uint fen_iaddrh; /* Individual address filter */
|
|
uint fen_iaddrl;
|
|
ushort fen_minflr; /* Minimum frame length (64) */
|
|
ushort fen_taddrh; /* Filter transfer MAC address */
|
|
ushort fen_taddrm;
|
|
ushort fen_taddrl;
|
|
ushort fen_padptr; /* Pointer to pad byte buffer */
|
|
ushort fen_cftype; /* control frame type */
|
|
ushort fen_cfrange; /* control frame range */
|
|
ushort fen_maxb; /* maximum BD count */
|
|
ushort fen_maxd1; /* Max DMA1 length (1520) */
|
|
ushort fen_maxd2; /* Max DMA2 length (1520) */
|
|
ushort fen_maxd; /* internal max DMA count */
|
|
ushort fen_dmacnt; /* internal DMA counter */
|
|
uint fen_octc; /* Total octect counter */
|
|
uint fen_colc; /* Total collision counter */
|
|
uint fen_broc; /* Total broadcast packet counter */
|
|
uint fen_mulc; /* Total multicast packet count */
|
|
uint fen_uspc; /* Total packets < 64 bytes */
|
|
uint fen_frgc; /* Total packets < 64 bytes with errors */
|
|
uint fen_ospc; /* Total packets > 1518 */
|
|
uint fen_jbrc; /* Total packets > 1518 with errors */
|
|
uint fen_p64c; /* Total packets == 64 bytes */
|
|
uint fen_p65c; /* Total packets 64 < bytes <= 127 */
|
|
uint fen_p128c; /* Total packets 127 < bytes <= 255 */
|
|
uint fen_p256c; /* Total packets 256 < bytes <= 511 */
|
|
uint fen_p512c; /* Total packets 512 < bytes <= 1023 */
|
|
uint fen_p1024c; /* Total packets 1024 < bytes <= 1518 */
|
|
uint fen_cambuf; /* Internal CAM buffer poiner */
|
|
ushort fen_rfthr; /* Received frames threshold */
|
|
ushort fen_rfcnt; /* Received frames count */
|
|
} fcc_enet_t;
|
|
|
|
/* FCC Event/Mask register as used by Ethernet.
|
|
*/
|
|
#define FCC_ENET_GRA ((ushort)0x0080) /* Graceful stop complete */
|
|
#define FCC_ENET_RXC ((ushort)0x0040) /* Control Frame Received */
|
|
#define FCC_ENET_TXC ((ushort)0x0020) /* Out of seq. Tx sent */
|
|
#define FCC_ENET_TXE ((ushort)0x0010) /* Transmit Error */
|
|
#define FCC_ENET_RXF ((ushort)0x0008) /* Full frame received */
|
|
#define FCC_ENET_BSY ((ushort)0x0004) /* Busy. Rx Frame dropped */
|
|
#define FCC_ENET_TXB ((ushort)0x0002) /* A buffer was transmitted */
|
|
#define FCC_ENET_RXB ((ushort)0x0001) /* A buffer was received */
|
|
|
|
/* FCC Mode Register (FPSMR) as used by Ethernet.
|
|
*/
|
|
#define FCC_PSMR_HBC ((uint)0x80000000) /* Enable heartbeat */
|
|
#define FCC_PSMR_FC ((uint)0x40000000) /* Force Collision */
|
|
#define FCC_PSMR_SBT ((uint)0x20000000) /* Stop backoff timer */
|
|
#define FCC_PSMR_LPB ((uint)0x10000000) /* Local protect. 1 = FDX */
|
|
#define FCC_PSMR_LCW ((uint)0x08000000) /* Late collision select */
|
|
#define FCC_PSMR_FDE ((uint)0x04000000) /* Full Duplex Enable */
|
|
#define FCC_PSMR_MON ((uint)0x02000000) /* RMON Enable */
|
|
#define FCC_PSMR_PRO ((uint)0x00400000) /* Promiscuous Enable */
|
|
#define FCC_PSMR_FCE ((uint)0x00200000) /* Flow Control Enable */
|
|
#define FCC_PSMR_RSH ((uint)0x00100000) /* Receive Short Frames */
|
|
#define FCC_PSMR_CAM ((uint)0x00000400) /* CAM enable */
|
|
#define FCC_PSMR_BRO ((uint)0x00000200) /* Broadcast pkt discard */
|
|
#define FCC_PSMR_ENCRC ((uint)0x00000080) /* Use 32-bit CRC */
|
|
|
|
/* IIC parameter RAM.
|
|
*/
|
|
typedef struct iic {
|
|
ushort iic_rbase; /* Rx Buffer descriptor base address */
|
|
ushort iic_tbase; /* Tx Buffer descriptor base address */
|
|
u_char iic_rfcr; /* Rx function code */
|
|
u_char iic_tfcr; /* Tx function code */
|
|
ushort iic_mrblr; /* Max receive buffer length */
|
|
uint iic_rstate; /* Internal */
|
|
uint iic_rdp; /* Internal */
|
|
ushort iic_rbptr; /* Internal */
|
|
ushort iic_rbc; /* Internal */
|
|
uint iic_rxtmp; /* Internal */
|
|
uint iic_tstate; /* Internal */
|
|
uint iic_tdp; /* Internal */
|
|
ushort iic_tbptr; /* Internal */
|
|
ushort iic_tbc; /* Internal */
|
|
uint iic_txtmp; /* Internal */
|
|
} iic_t;
|
|
|
|
/* IDMA parameter RAM
|
|
*/
|
|
typedef struct idma {
|
|
ushort ibase; /* IDMA buffer descriptor table base address */
|
|
ushort dcm; /* DMA channel mode */
|
|
ushort ibdptr; /* IDMA current buffer descriptor pointer */
|
|
ushort dpr_buf; /* IDMA transfer buffer base address */
|
|
ushort buf_inv; /* internal buffer inventory */
|
|
ushort ss_max; /* steady-state maximum transfer size */
|
|
ushort dpr_in_ptr; /* write pointer inside the internal buffer */
|
|
ushort sts; /* source transfer size */
|
|
ushort dpr_out_ptr; /* read pointer inside the internal buffer */
|
|
ushort seob; /* source end of burst */
|
|
ushort deob; /* destination end of burst */
|
|
ushort dts; /* destination transfer size */
|
|
ushort ret_add; /* return address when working in ERM=1 mode */
|
|
ushort res0; /* reserved */
|
|
uint bd_cnt; /* internal byte count */
|
|
uint s_ptr; /* source internal data pointer */
|
|
uint d_ptr; /* destination internal data pointer */
|
|
uint istate; /* internal state */
|
|
u_char res1[20]; /* pad to 64-byte length */
|
|
} idma_t;
|
|
|
|
/* DMA channel mode bit fields
|
|
*/
|
|
#define IDMA_DCM_FB ((ushort)0x8000) /* fly-by mode */
|
|
#define IDMA_DCM_LP ((ushort)0x4000) /* low priority */
|
|
#define IDMA_DCM_TC2 ((ushort)0x0400) /* value driven on TC[2] */
|
|
#define IDMA_DCM_DMA_WRAP_MASK ((ushort)0x01c0) /* mask for DMA wrap */
|
|
#define IDMA_DCM_DMA_WRAP_64 ((ushort)0x0000) /* 64-byte DMA xfer buffer */
|
|
#define IDMA_DCM_DMA_WRAP_128 ((ushort)0x0040) /* 128-byte DMA xfer buffer */
|
|
#define IDMA_DCM_DMA_WRAP_256 ((ushort)0x0080) /* 256-byte DMA xfer buffer */
|
|
#define IDMA_DCM_DMA_WRAP_512 ((ushort)0x00c0) /* 512-byte DMA xfer buffer */
|
|
#define IDMA_DCM_DMA_WRAP_1024 ((ushort)0x0100) /* 1024-byte DMA xfer buffer */
|
|
#define IDMA_DCM_DMA_WRAP_2048 ((ushort)0x0140) /* 2048-byte DMA xfer buffer */
|
|
#define IDMA_DCM_SINC ((ushort)0x0020) /* source inc addr */
|
|
#define IDMA_DCM_DINC ((ushort)0x0010) /* destination inc addr */
|
|
#define IDMA_DCM_ERM ((ushort)0x0008) /* external request mode */
|
|
#define IDMA_DCM_DT ((ushort)0x0004) /* DONE treatment */
|
|
#define IDMA_DCM_SD_MASK ((ushort)0x0003) /* mask for SD bit field */
|
|
#define IDMA_DCM_SD_MEM2MEM ((ushort)0x0000) /* memory-to-memory xfer */
|
|
#define IDMA_DCM_SD_PER2MEM ((ushort)0x0002) /* peripheral-to-memory xfer */
|
|
#define IDMA_DCM_SD_MEM2PER ((ushort)0x0001) /* memory-to-peripheral xfer */
|
|
|
|
/* IDMA Buffer Descriptors
|
|
*/
|
|
typedef struct idma_bd {
|
|
uint flags;
|
|
uint len; /* data length */
|
|
uint src; /* source data buffer pointer */
|
|
uint dst; /* destination data buffer pointer */
|
|
} idma_bd_t;
|
|
|
|
/* IDMA buffer descriptor flag bit fields
|
|
*/
|
|
#define IDMA_BD_V ((uint)0x80000000) /* valid */
|
|
#define IDMA_BD_W ((uint)0x20000000) /* wrap */
|
|
#define IDMA_BD_I ((uint)0x10000000) /* interrupt */
|
|
#define IDMA_BD_L ((uint)0x08000000) /* last */
|
|
#define IDMA_BD_CM ((uint)0x02000000) /* continuous mode */
|
|
#define IDMA_BD_SDN ((uint)0x00400000) /* source done */
|
|
#define IDMA_BD_DDN ((uint)0x00200000) /* destination done */
|
|
#define IDMA_BD_DGBL ((uint)0x00100000) /* destination global */
|
|
#define IDMA_BD_DBO_LE ((uint)0x00040000) /* little-end dest byte order */
|
|
#define IDMA_BD_DBO_BE ((uint)0x00080000) /* big-end dest byte order */
|
|
#define IDMA_BD_DDTB ((uint)0x00010000) /* destination data bus */
|
|
#define IDMA_BD_SGBL ((uint)0x00002000) /* source global */
|
|
#define IDMA_BD_SBO_LE ((uint)0x00000800) /* little-end src byte order */
|
|
#define IDMA_BD_SBO_BE ((uint)0x00001000) /* big-end src byte order */
|
|
#define IDMA_BD_SDTB ((uint)0x00000200) /* source data bus */
|
|
|
|
/* per-channel IDMA registers
|
|
*/
|
|
typedef struct im_idma {
|
|
u_char idsr; /* IDMAn event status register */
|
|
u_char res0[3];
|
|
u_char idmr; /* IDMAn event mask register */
|
|
u_char res1[3];
|
|
} im_idma_t;
|
|
|
|
/* IDMA event register bit fields
|
|
*/
|
|
#define IDMA_EVENT_SC ((unsigned char)0x08) /* stop completed */
|
|
#define IDMA_EVENT_OB ((unsigned char)0x04) /* out of buffers */
|
|
#define IDMA_EVENT_EDN ((unsigned char)0x02) /* external DONE asserted */
|
|
#define IDMA_EVENT_BC ((unsigned char)0x01) /* buffer descriptor complete */
|
|
|
|
/* RISC Controller Configuration Register (RCCR) bit fields
|
|
*/
|
|
#define RCCR_TIME ((uint)0x80000000) /* timer enable */
|
|
#define RCCR_TIMEP_MASK ((uint)0x3f000000) /* mask for timer period bit field */
|
|
#define RCCR_DR0M ((uint)0x00800000) /* IDMA0 request mode */
|
|
#define RCCR_DR1M ((uint)0x00400000) /* IDMA1 request mode */
|
|
#define RCCR_DR2M ((uint)0x00000080) /* IDMA2 request mode */
|
|
#define RCCR_DR3M ((uint)0x00000040) /* IDMA3 request mode */
|
|
#define RCCR_DR0QP_MASK ((uint)0x00300000) /* mask for IDMA0 req priority */
|
|
#define RCCR_DR0QP_HIGH ((uint)0x00000000) /* IDMA0 has high req priority */
|
|
#define RCCR_DR0QP_MED ((uint)0x00100000) /* IDMA0 has medium req priority */
|
|
#define RCCR_DR0QP_LOW ((uint)0x00200000) /* IDMA0 has low req priority */
|
|
#define RCCR_DR1QP_MASK ((uint)0x00030000) /* mask for IDMA1 req priority */
|
|
#define RCCR_DR1QP_HIGH ((uint)0x00000000) /* IDMA1 has high req priority */
|
|
#define RCCR_DR1QP_MED ((uint)0x00010000) /* IDMA1 has medium req priority */
|
|
#define RCCR_DR1QP_LOW ((uint)0x00020000) /* IDMA1 has low req priority */
|
|
#define RCCR_DR2QP_MASK ((uint)0x00000030) /* mask for IDMA2 req priority */
|
|
#define RCCR_DR2QP_HIGH ((uint)0x00000000) /* IDMA2 has high req priority */
|
|
#define RCCR_DR2QP_MED ((uint)0x00000010) /* IDMA2 has medium req priority */
|
|
#define RCCR_DR2QP_LOW ((uint)0x00000020) /* IDMA2 has low req priority */
|
|
#define RCCR_DR3QP_MASK ((uint)0x00000003) /* mask for IDMA3 req priority */
|
|
#define RCCR_DR3QP_HIGH ((uint)0x00000000) /* IDMA3 has high req priority */
|
|
#define RCCR_DR3QP_MED ((uint)0x00000001) /* IDMA3 has medium req priority */
|
|
#define RCCR_DR3QP_LOW ((uint)0x00000002) /* IDMA3 has low req priority */
|
|
#define RCCR_EIE ((uint)0x00080000) /* external interrupt enable */
|
|
#define RCCR_SCD ((uint)0x00040000) /* scheduler configuration */
|
|
#define RCCR_ERAM_MASK ((uint)0x0000e000) /* mask for enable RAM microcode */
|
|
#define RCCR_ERAM_0KB ((uint)0x00000000) /* use 0KB of dpram for microcode */
|
|
#define RCCR_ERAM_2KB ((uint)0x00002000) /* use 2KB of dpram for microcode */
|
|
#define RCCR_ERAM_4KB ((uint)0x00004000) /* use 4KB of dpram for microcode */
|
|
#define RCCR_ERAM_6KB ((uint)0x00006000) /* use 6KB of dpram for microcode */
|
|
#define RCCR_ERAM_8KB ((uint)0x00008000) /* use 8KB of dpram for microcode */
|
|
#define RCCR_ERAM_10KB ((uint)0x0000a000) /* use 10KB of dpram for microcode */
|
|
#define RCCR_ERAM_12KB ((uint)0x0000c000) /* use 12KB of dpram for microcode */
|
|
#define RCCR_EDM0 ((uint)0x00000800) /* DREQ0 edge detect mode */
|
|
#define RCCR_EDM1 ((uint)0x00000400) /* DREQ1 edge detect mode */
|
|
#define RCCR_EDM2 ((uint)0x00000200) /* DREQ2 edge detect mode */
|
|
#define RCCR_EDM3 ((uint)0x00000100) /* DREQ3 edge detect mode */
|
|
#define RCCR_DEM01 ((uint)0x00000008) /* DONE0/DONE1 edge detect mode */
|
|
#define RCCR_DEM23 ((uint)0x00000004) /* DONE2/DONE3 edge detect mode */
|
|
|
|
/*-----------------------------------------------------------------------
|
|
* CMXFCR - CMX FCC Clock Route Register
|
|
*/
|
|
#define CMXFCR_FC1 0x40000000 /* FCC1 connection */
|
|
#define CMXFCR_RF1CS_MSK 0x38000000 /* Receive FCC1 Clock Source Mask */
|
|
#define CMXFCR_TF1CS_MSK 0x07000000 /* Transmit FCC1 Clock Source Mask */
|
|
#define CMXFCR_FC2 0x00400000 /* FCC2 connection */
|
|
#define CMXFCR_RF2CS_MSK 0x00380000 /* Receive FCC2 Clock Source Mask */
|
|
#define CMXFCR_TF2CS_MSK 0x00070000 /* Transmit FCC2 Clock Source Mask */
|
|
#define CMXFCR_FC3 0x00004000 /* FCC3 connection */
|
|
#define CMXFCR_RF3CS_MSK 0x00003800 /* Receive FCC3 Clock Source Mask */
|
|
#define CMXFCR_TF3CS_MSK 0x00000700 /* Transmit FCC3 Clock Source Mask */
|
|
|
|
#define CMXFCR_RF1CS_BRG5 0x00000000 /* Receive FCC1 Clock Source is BRG5 */
|
|
#define CMXFCR_RF1CS_BRG6 0x08000000 /* Receive FCC1 Clock Source is BRG6 */
|
|
#define CMXFCR_RF1CS_BRG7 0x10000000 /* Receive FCC1 Clock Source is BRG7 */
|
|
#define CMXFCR_RF1CS_BRG8 0x18000000 /* Receive FCC1 Clock Source is BRG8 */
|
|
#define CMXFCR_RF1CS_CLK9 0x20000000 /* Receive FCC1 Clock Source is CLK9 */
|
|
#define CMXFCR_RF1CS_CLK10 0x28000000 /* Receive FCC1 Clock Source is CLK10 */
|
|
#define CMXFCR_RF1CS_CLK11 0x30000000 /* Receive FCC1 Clock Source is CLK11 */
|
|
#define CMXFCR_RF1CS_CLK12 0x38000000 /* Receive FCC1 Clock Source is CLK12 */
|
|
|
|
#define CMXFCR_TF1CS_BRG5 0x00000000 /* Transmit FCC1 Clock Source is BRG5 */
|
|
#define CMXFCR_TF1CS_BRG6 0x01000000 /* Transmit FCC1 Clock Source is BRG6 */
|
|
#define CMXFCR_TF1CS_BRG7 0x02000000 /* Transmit FCC1 Clock Source is BRG7 */
|
|
#define CMXFCR_TF1CS_BRG8 0x03000000 /* Transmit FCC1 Clock Source is BRG8 */
|
|
#define CMXFCR_TF1CS_CLK9 0x04000000 /* Transmit FCC1 Clock Source is CLK9 */
|
|
#define CMXFCR_TF1CS_CLK10 0x05000000 /* Transmit FCC1 Clock Source is CLK10 */
|
|
#define CMXFCR_TF1CS_CLK11 0x06000000 /* Transmit FCC1 Clock Source is CLK11 */
|
|
#define CMXFCR_TF1CS_CLK12 0x07000000 /* Transmit FCC1 Clock Source is CLK12 */
|
|
|
|
#define CMXFCR_RF2CS_BRG5 0x00000000 /* Receive FCC2 Clock Source is BRG5 */
|
|
#define CMXFCR_RF2CS_BRG6 0x00080000 /* Receive FCC2 Clock Source is BRG6 */
|
|
#define CMXFCR_RF2CS_BRG7 0x00100000 /* Receive FCC2 Clock Source is BRG7 */
|
|
#define CMXFCR_RF2CS_BRG8 0x00180000 /* Receive FCC2 Clock Source is BRG8 */
|
|
#define CMXFCR_RF2CS_CLK13 0x00200000 /* Receive FCC2 Clock Source is CLK13 */
|
|
#define CMXFCR_RF2CS_CLK14 0x00280000 /* Receive FCC2 Clock Source is CLK14 */
|
|
#define CMXFCR_RF2CS_CLK15 0x00300000 /* Receive FCC2 Clock Source is CLK15 */
|
|
#define CMXFCR_RF2CS_CLK16 0x00380000 /* Receive FCC2 Clock Source is CLK16 */
|
|
|
|
#define CMXFCR_TF2CS_BRG5 0x00000000 /* Transmit FCC2 Clock Source is BRG5 */
|
|
#define CMXFCR_TF2CS_BRG6 0x00010000 /* Transmit FCC2 Clock Source is BRG6 */
|
|
#define CMXFCR_TF2CS_BRG7 0x00020000 /* Transmit FCC2 Clock Source is BRG7 */
|
|
#define CMXFCR_TF2CS_BRG8 0x00030000 /* Transmit FCC2 Clock Source is BRG8 */
|
|
#define CMXFCR_TF2CS_CLK13 0x00040000 /* Transmit FCC2 Clock Source is CLK13 */
|
|
#define CMXFCR_TF2CS_CLK14 0x00050000 /* Transmit FCC2 Clock Source is CLK14 */
|
|
#define CMXFCR_TF2CS_CLK15 0x00060000 /* Transmit FCC2 Clock Source is CLK15 */
|
|
#define CMXFCR_TF2CS_CLK16 0x00070000 /* Transmit FCC2 Clock Source is CLK16 */
|
|
|
|
#define CMXFCR_RF3CS_BRG5 0x00000000 /* Receive FCC3 Clock Source is BRG5 */
|
|
#define CMXFCR_RF3CS_BRG6 0x00000800 /* Receive FCC3 Clock Source is BRG6 */
|
|
#define CMXFCR_RF3CS_BRG7 0x00001000 /* Receive FCC3 Clock Source is BRG7 */
|
|
#define CMXFCR_RF3CS_BRG8 0x00001800 /* Receive FCC3 Clock Source is BRG8 */
|
|
#define CMXFCR_RF3CS_CLK13 0x00002000 /* Receive FCC3 Clock Source is CLK13 */
|
|
#define CMXFCR_RF3CS_CLK14 0x00002800 /* Receive FCC3 Clock Source is CLK14 */
|
|
#define CMXFCR_RF3CS_CLK15 0x00003000 /* Receive FCC3 Clock Source is CLK15 */
|
|
#define CMXFCR_RF3CS_CLK16 0x00003800 /* Receive FCC3 Clock Source is CLK16 */
|
|
|
|
#define CMXFCR_TF3CS_BRG5 0x00000000 /* Transmit FCC3 Clock Source is BRG5 */
|
|
#define CMXFCR_TF3CS_BRG6 0x00000100 /* Transmit FCC3 Clock Source is BRG6 */
|
|
#define CMXFCR_TF3CS_BRG7 0x00000200 /* Transmit FCC3 Clock Source is BRG7 */
|
|
#define CMXFCR_TF3CS_BRG8 0x00000300 /* Transmit FCC3 Clock Source is BRG8 */
|
|
#define CMXFCR_TF3CS_CLK13 0x00000400 /* Transmit FCC3 Clock Source is CLK13 */
|
|
#define CMXFCR_TF3CS_CLK14 0x00000500 /* Transmit FCC3 Clock Source is CLK14 */
|
|
#define CMXFCR_TF3CS_CLK15 0x00000600 /* Transmit FCC3 Clock Source is CLK15 */
|
|
#define CMXFCR_TF3CS_CLK16 0x00000700 /* Transmit FCC3 Clock Source is CLK16 */
|
|
|
|
/*-----------------------------------------------------------------------
|
|
* CMXSCR - CMX SCC Clock Route Register
|
|
*/
|
|
#define CMXSCR_GR1 0x80000000 /* Grant Support of SCC1 */
|
|
#define CMXSCR_SC1 0x40000000 /* SCC1 connection */
|
|
#define CMXSCR_RS1CS_MSK 0x38000000 /* Receive SCC1 Clock Source Mask */
|
|
#define CMXSCR_TS1CS_MSK 0x07000000 /* Transmit SCC1 Clock Source Mask */
|
|
#define CMXSCR_GR2 0x00800000 /* Grant Support of SCC2 */
|
|
#define CMXSCR_SC2 0x00400000 /* SCC2 connection */
|
|
#define CMXSCR_RS2CS_MSK 0x00380000 /* Receive SCC2 Clock Source Mask */
|
|
#define CMXSCR_TS2CS_MSK 0x00070000 /* Transmit SCC2 Clock Source Mask */
|
|
#define CMXSCR_GR3 0x00008000 /* Grant Support of SCC3 */
|
|
#define CMXSCR_SC3 0x00004000 /* SCC3 connection */
|
|
#define CMXSCR_RS3CS_MSK 0x00003800 /* Receive SCC3 Clock Source Mask */
|
|
#define CMXSCR_TS3CS_MSK 0x00000700 /* Transmit SCC3 Clock Source Mask */
|
|
#define CMXSCR_GR4 0x00000080 /* Grant Support of SCC4 */
|
|
#define CMXSCR_SC4 0x00000040 /* SCC4 connection */
|
|
#define CMXSCR_RS4CS_MSK 0x00000038 /* Receive SCC4 Clock Source Mask */
|
|
#define CMXSCR_TS4CS_MSK 0x00000007 /* Transmit SCC4 Clock Source Mask */
|
|
|
|
#define CMXSCR_RS1CS_BRG1 0x00000000 /* SCC1 Rx Clock Source is BRG1 */
|
|
#define CMXSCR_RS1CS_BRG2 0x08000000 /* SCC1 Rx Clock Source is BRG2 */
|
|
#define CMXSCR_RS1CS_BRG3 0x10000000 /* SCC1 Rx Clock Source is BRG3 */
|
|
#define CMXSCR_RS1CS_BRG4 0x18000000 /* SCC1 Rx Clock Source is BRG4 */
|
|
#define CMXSCR_RS1CS_CLK11 0x20000000 /* SCC1 Rx Clock Source is CLK11 */
|
|
#define CMXSCR_RS1CS_CLK12 0x28000000 /* SCC1 Rx Clock Source is CLK12 */
|
|
#define CMXSCR_RS1CS_CLK3 0x30000000 /* SCC1 Rx Clock Source is CLK3 */
|
|
#define CMXSCR_RS1CS_CLK4 0x38000000 /* SCC1 Rx Clock Source is CLK4 */
|
|
|
|
#define CMXSCR_TS1CS_BRG1 0x00000000 /* SCC1 Tx Clock Source is BRG1 */
|
|
#define CMXSCR_TS1CS_BRG2 0x01000000 /* SCC1 Tx Clock Source is BRG2 */
|
|
#define CMXSCR_TS1CS_BRG3 0x02000000 /* SCC1 Tx Clock Source is BRG3 */
|
|
#define CMXSCR_TS1CS_BRG4 0x03000000 /* SCC1 Tx Clock Source is BRG4 */
|
|
#define CMXSCR_TS1CS_CLK11 0x04000000 /* SCC1 Tx Clock Source is CLK11 */
|
|
#define CMXSCR_TS1CS_CLK12 0x05000000 /* SCC1 Tx Clock Source is CLK12 */
|
|
#define CMXSCR_TS1CS_CLK3 0x06000000 /* SCC1 Tx Clock Source is CLK3 */
|
|
#define CMXSCR_TS1CS_CLK4 0x07000000 /* SCC1 Tx Clock Source is CLK4 */
|
|
|
|
#define CMXSCR_RS2CS_BRG1 0x00000000 /* SCC2 Rx Clock Source is BRG1 */
|
|
#define CMXSCR_RS2CS_BRG2 0x00080000 /* SCC2 Rx Clock Source is BRG2 */
|
|
#define CMXSCR_RS2CS_BRG3 0x00100000 /* SCC2 Rx Clock Source is BRG3 */
|
|
#define CMXSCR_RS2CS_BRG4 0x00180000 /* SCC2 Rx Clock Source is BRG4 */
|
|
#define CMXSCR_RS2CS_CLK11 0x00200000 /* SCC2 Rx Clock Source is CLK11 */
|
|
#define CMXSCR_RS2CS_CLK12 0x00280000 /* SCC2 Rx Clock Source is CLK12 */
|
|
#define CMXSCR_RS2CS_CLK3 0x00300000 /* SCC2 Rx Clock Source is CLK3 */
|
|
#define CMXSCR_RS2CS_CLK4 0x00380000 /* SCC2 Rx Clock Source is CLK4 */
|
|
|
|
#define CMXSCR_TS2CS_BRG1 0x00000000 /* SCC2 Tx Clock Source is BRG1 */
|
|
#define CMXSCR_TS2CS_BRG2 0x00010000 /* SCC2 Tx Clock Source is BRG2 */
|
|
#define CMXSCR_TS2CS_BRG3 0x00020000 /* SCC2 Tx Clock Source is BRG3 */
|
|
#define CMXSCR_TS2CS_BRG4 0x00030000 /* SCC2 Tx Clock Source is BRG4 */
|
|
#define CMXSCR_TS2CS_CLK11 0x00040000 /* SCC2 Tx Clock Source is CLK11 */
|
|
#define CMXSCR_TS2CS_CLK12 0x00050000 /* SCC2 Tx Clock Source is CLK12 */
|
|
#define CMXSCR_TS2CS_CLK3 0x00060000 /* SCC2 Tx Clock Source is CLK3 */
|
|
#define CMXSCR_TS2CS_CLK4 0x00070000 /* SCC2 Tx Clock Source is CLK4 */
|
|
|
|
#define CMXSCR_RS3CS_BRG1 0x00000000 /* SCC3 Rx Clock Source is BRG1 */
|
|
#define CMXSCR_RS3CS_BRG2 0x00000800 /* SCC3 Rx Clock Source is BRG2 */
|
|
#define CMXSCR_RS3CS_BRG3 0x00001000 /* SCC3 Rx Clock Source is BRG3 */
|
|
#define CMXSCR_RS3CS_BRG4 0x00001800 /* SCC3 Rx Clock Source is BRG4 */
|
|
#define CMXSCR_RS3CS_CLK5 0x00002000 /* SCC3 Rx Clock Source is CLK5 */
|
|
#define CMXSCR_RS3CS_CLK6 0x00002800 /* SCC3 Rx Clock Source is CLK6 */
|
|
#define CMXSCR_RS3CS_CLK7 0x00003000 /* SCC3 Rx Clock Source is CLK7 */
|
|
#define CMXSCR_RS3CS_CLK8 0x00003800 /* SCC3 Rx Clock Source is CLK8 */
|
|
|
|
#define CMXSCR_TS3CS_BRG1 0x00000000 /* SCC3 Tx Clock Source is BRG1 */
|
|
#define CMXSCR_TS3CS_BRG2 0x00000100 /* SCC3 Tx Clock Source is BRG2 */
|
|
#define CMXSCR_TS3CS_BRG3 0x00000200 /* SCC3 Tx Clock Source is BRG3 */
|
|
#define CMXSCR_TS3CS_BRG4 0x00000300 /* SCC3 Tx Clock Source is BRG4 */
|
|
#define CMXSCR_TS3CS_CLK5 0x00000400 /* SCC3 Tx Clock Source is CLK5 */
|
|
#define CMXSCR_TS3CS_CLK6 0x00000500 /* SCC3 Tx Clock Source is CLK6 */
|
|
#define CMXSCR_TS3CS_CLK7 0x00000600 /* SCC3 Tx Clock Source is CLK7 */
|
|
#define CMXSCR_TS3CS_CLK8 0x00000700 /* SCC3 Tx Clock Source is CLK8 */
|
|
|
|
#define CMXSCR_RS4CS_BRG1 0x00000000 /* SCC4 Rx Clock Source is BRG1 */
|
|
#define CMXSCR_RS4CS_BRG2 0x00000008 /* SCC4 Rx Clock Source is BRG2 */
|
|
#define CMXSCR_RS4CS_BRG3 0x00000010 /* SCC4 Rx Clock Source is BRG3 */
|
|
#define CMXSCR_RS4CS_BRG4 0x00000018 /* SCC4 Rx Clock Source is BRG4 */
|
|
#define CMXSCR_RS4CS_CLK5 0x00000020 /* SCC4 Rx Clock Source is CLK5 */
|
|
#define CMXSCR_RS4CS_CLK6 0x00000028 /* SCC4 Rx Clock Source is CLK6 */
|
|
#define CMXSCR_RS4CS_CLK7 0x00000030 /* SCC4 Rx Clock Source is CLK7 */
|
|
#define CMXSCR_RS4CS_CLK8 0x00000038 /* SCC4 Rx Clock Source is CLK8 */
|
|
|
|
#define CMXSCR_TS4CS_BRG1 0x00000000 /* SCC4 Tx Clock Source is BRG1 */
|
|
#define CMXSCR_TS4CS_BRG2 0x00000001 /* SCC4 Tx Clock Source is BRG2 */
|
|
#define CMXSCR_TS4CS_BRG3 0x00000002 /* SCC4 Tx Clock Source is BRG3 */
|
|
#define CMXSCR_TS4CS_BRG4 0x00000003 /* SCC4 Tx Clock Source is BRG4 */
|
|
#define CMXSCR_TS4CS_CLK5 0x00000004 /* SCC4 Tx Clock Source is CLK5 */
|
|
#define CMXSCR_TS4CS_CLK6 0x00000005 /* SCC4 Tx Clock Source is CLK6 */
|
|
#define CMXSCR_TS4CS_CLK7 0x00000006 /* SCC4 Tx Clock Source is CLK7 */
|
|
#define CMXSCR_TS4CS_CLK8 0x00000007 /* SCC4 Tx Clock Source is CLK8 */
|
|
|
|
/*-----------------------------------------------------------------------
|
|
* SIUMCR - SIU Module Configuration Register 4-31
|
|
*/
|
|
#define SIUMCR_BBD 0x80000000 /* Bus Busy Disable */
|
|
#define SIUMCR_ESE 0x40000000 /* External Snoop Enable */
|
|
#define SIUMCR_PBSE 0x20000000 /* Parity Byte Select Enable */
|
|
#define SIUMCR_CDIS 0x10000000 /* Core Disable */
|
|
#define SIUMCR_DPPC00 0x00000000 /* Data Parity Pins Configuration*/
|
|
#define SIUMCR_DPPC01 0x04000000 /* - " - */
|
|
#define SIUMCR_DPPC10 0x08000000 /* - " - */
|
|
#define SIUMCR_DPPC11 0x0c000000 /* - " - */
|
|
#define SIUMCR_L2CPC00 0x00000000 /* L2 Cache Pins Configuration */
|
|
#define SIUMCR_L2CPC01 0x01000000 /* - " - */
|
|
#define SIUMCR_L2CPC10 0x02000000 /* - " - */
|
|
#define SIUMCR_L2CPC11 0x03000000 /* - " - */
|
|
#define SIUMCR_LBPC00 0x00000000 /* Local Bus Pins Configuration */
|
|
#define SIUMCR_LBPC01 0x00400000 /* - " - */
|
|
#define SIUMCR_LBPC10 0x00800000 /* - " - */
|
|
#define SIUMCR_LBPC11 0x00c00000 /* - " - */
|
|
#define SIUMCR_APPC00 0x00000000 /* Address Parity Pins Configuration*/
|
|
#define SIUMCR_APPC01 0x00100000 /* - " - */
|
|
#define SIUMCR_APPC10 0x00200000 /* - " - */
|
|
#define SIUMCR_APPC11 0x00300000 /* - " - */
|
|
#define SIUMCR_CS10PC00 0x00000000 /* CS10 Pin Configuration */
|
|
#define SIUMCR_CS10PC01 0x00040000 /* - " - */
|
|
#define SIUMCR_CS10PC10 0x00080000 /* - " - */
|
|
#define SIUMCR_CS10PC11 0x000c0000 /* - " - */
|
|
#define SIUMCR_BCTLC00 0x00000000 /* Buffer Control Configuration */
|
|
#define SIUMCR_BCTLC01 0x00010000 /* - " - */
|
|
#define SIUMCR_BCTLC10 0x00020000 /* - " - */
|
|
#define SIUMCR_BCTLC11 0x00030000 /* - " - */
|
|
#define SIUMCR_MMR00 0x00000000 /* Mask Masters Requests */
|
|
#define SIUMCR_MMR01 0x00004000 /* - " - */
|
|
#define SIUMCR_MMR10 0x00008000 /* - " - */
|
|
#define SIUMCR_MMR11 0x0000c000 /* - " - */
|
|
#define SIUMCR_LPBSE 0x00002000 /* LocalBus Parity Byte Select Enable*/
|
|
|
|
/*-----------------------------------------------------------------------
|
|
* SCCR - System Clock Control Register 9-8
|
|
*/
|
|
#define SCCR_PCI_MODE 0x00000100 /* PCI Mode */
|
|
#define SCCR_PCI_MODCK 0x00000080 /* Value of PCI_MODCK pin */
|
|
#define SCCR_PCIDF_MSK 0x00000078 /* PCI division factor */
|
|
#define SCCR_PCIDF_SHIFT 3
|
|
|
|
#ifndef CPM_IMMR_OFFSET
|
|
#define CPM_IMMR_OFFSET 0x101a8
|
|
#endif
|
|
|
|
#define FCC_PSMR_RMII ((uint)0x00020000) /* Use RMII interface */
|
|
|
|
/* FCC iop & clock configuration. BSP code is responsible to define Fx_RXCLK & Fx_TXCLK
|
|
* in order to use clock-computing stuff below for the FCC x
|
|
*/
|
|
|
|
/* Automatically generates register configurations */
|
|
#define PC_CLK(x) ((uint)(1<<(x-1))) /* FCC CLK I/O ports */
|
|
|
|
#define CMXFCR_RF1CS(x) ((uint)((x-5)<<27)) /* FCC1 Receive Clock Source */
|
|
#define CMXFCR_TF1CS(x) ((uint)((x-5)<<24)) /* FCC1 Transmit Clock Source */
|
|
#define CMXFCR_RF2CS(x) ((uint)((x-9)<<19)) /* FCC2 Receive Clock Source */
|
|
#define CMXFCR_TF2CS(x) ((uint)((x-9)<<16)) /* FCC2 Transmit Clock Source */
|
|
#define CMXFCR_RF3CS(x) ((uint)((x-9)<<11)) /* FCC3 Receive Clock Source */
|
|
#define CMXFCR_TF3CS(x) ((uint)((x-9)<<8)) /* FCC3 Transmit Clock Source */
|
|
|
|
#define PC_F1RXCLK PC_CLK(F1_RXCLK)
|
|
#define PC_F1TXCLK PC_CLK(F1_TXCLK)
|
|
#define CMX1_CLK_ROUTE (CMXFCR_RF1CS(F1_RXCLK) | CMXFCR_TF1CS(F1_TXCLK))
|
|
#define CMX1_CLK_MASK ((uint)0xff000000)
|
|
|
|
#define PC_F2RXCLK PC_CLK(F2_RXCLK)
|
|
#define PC_F2TXCLK PC_CLK(F2_TXCLK)
|
|
#define CMX2_CLK_ROUTE (CMXFCR_RF2CS(F2_RXCLK) | CMXFCR_TF2CS(F2_TXCLK))
|
|
#define CMX2_CLK_MASK ((uint)0x00ff0000)
|
|
|
|
#define PC_F3RXCLK PC_CLK(F3_RXCLK)
|
|
#define PC_F3TXCLK PC_CLK(F3_TXCLK)
|
|
#define CMX3_CLK_ROUTE (CMXFCR_RF3CS(F3_RXCLK) | CMXFCR_TF3CS(F3_TXCLK))
|
|
#define CMX3_CLK_MASK ((uint)0x0000ff00)
|
|
|
|
#define CPMUX_CLK_MASK (CMX3_CLK_MASK | CMX2_CLK_MASK)
|
|
#define CPMUX_CLK_ROUTE (CMX3_CLK_ROUTE | CMX2_CLK_ROUTE)
|
|
|
|
#define CLK_TRX (PC_F3TXCLK | PC_F3RXCLK | PC_F2TXCLK | PC_F2RXCLK)
|
|
|
|
/* I/O Pin assignment for FCC1. I don't yet know the best way to do this,
|
|
* but there is little variation among the choices.
|
|
*/
|
|
#define PA1_COL 0x00000001U
|
|
#define PA1_CRS 0x00000002U
|
|
#define PA1_TXER 0x00000004U
|
|
#define PA1_TXEN 0x00000008U
|
|
#define PA1_RXDV 0x00000010U
|
|
#define PA1_RXER 0x00000020U
|
|
#define PA1_TXDAT 0x00003c00U
|
|
#define PA1_RXDAT 0x0003c000U
|
|
#define PA1_PSORA0 (PA1_RXDAT | PA1_TXDAT)
|
|
#define PA1_PSORA1 (PA1_COL | PA1_CRS | PA1_TXER | PA1_TXEN | \
|
|
PA1_RXDV | PA1_RXER)
|
|
#define PA1_DIRA0 (PA1_RXDAT | PA1_CRS | PA1_COL | PA1_RXER | PA1_RXDV)
|
|
#define PA1_DIRA1 (PA1_TXDAT | PA1_TXEN | PA1_TXER)
|
|
|
|
|
|
/* I/O Pin assignment for FCC2. I don't yet know the best way to do this,
|
|
* but there is little variation among the choices.
|
|
*/
|
|
#define PB2_TXER 0x00000001U
|
|
#define PB2_RXDV 0x00000002U
|
|
#define PB2_TXEN 0x00000004U
|
|
#define PB2_RXER 0x00000008U
|
|
#define PB2_COL 0x00000010U
|
|
#define PB2_CRS 0x00000020U
|
|
#define PB2_TXDAT 0x000003c0U
|
|
#define PB2_RXDAT 0x00003c00U
|
|
#define PB2_PSORB0 (PB2_RXDAT | PB2_TXDAT | PB2_CRS | PB2_COL | \
|
|
PB2_RXER | PB2_RXDV | PB2_TXER)
|
|
#define PB2_PSORB1 (PB2_TXEN)
|
|
#define PB2_DIRB0 (PB2_RXDAT | PB2_CRS | PB2_COL | PB2_RXER | PB2_RXDV)
|
|
#define PB2_DIRB1 (PB2_TXDAT | PB2_TXEN | PB2_TXER)
|
|
|
|
|
|
/* I/O Pin assignment for FCC3. I don't yet know the best way to do this,
|
|
* but there is little variation among the choices.
|
|
*/
|
|
#define PB3_RXDV 0x00004000U
|
|
#define PB3_RXER 0x00008000U
|
|
#define PB3_TXER 0x00010000U
|
|
#define PB3_TXEN 0x00020000U
|
|
#define PB3_COL 0x00040000U
|
|
#define PB3_CRS 0x00080000U
|
|
#define PB3_TXDAT 0x0f000000U
|
|
#define PC3_TXDAT 0x00000010U
|
|
#define PB3_RXDAT 0x00f00000U
|
|
#define PB3_PSORB0 (PB3_RXDAT | PB3_TXDAT | PB3_CRS | PB3_COL | \
|
|
PB3_RXER | PB3_RXDV | PB3_TXER | PB3_TXEN)
|
|
#define PB3_PSORB1 0
|
|
#define PB3_DIRB0 (PB3_RXDAT | PB3_CRS | PB3_COL | PB3_RXER | PB3_RXDV)
|
|
#define PB3_DIRB1 (PB3_TXDAT | PB3_TXEN | PB3_TXER)
|
|
#define PC3_DIRC1 (PC3_TXDAT)
|
|
|
|
/* Handy macro to specify mem for FCCs*/
|
|
#define FCC_MEM_OFFSET(x) (CPM_FCC_SPECIAL_BASE + (x*128))
|
|
#define FCC1_MEM_OFFSET FCC_MEM_OFFSET(0)
|
|
#define FCC2_MEM_OFFSET FCC_MEM_OFFSET(1)
|
|
#define FCC3_MEM_OFFSET FCC_MEM_OFFSET(2)
|
|
|
|
/* Clocks and GRG's */
|
|
|
|
enum cpm_clk_dir {
|
|
CPM_CLK_RX,
|
|
CPM_CLK_TX,
|
|
CPM_CLK_RTX
|
|
};
|
|
|
|
enum cpm_clk_target {
|
|
CPM_CLK_SCC1,
|
|
CPM_CLK_SCC2,
|
|
CPM_CLK_SCC3,
|
|
CPM_CLK_SCC4,
|
|
CPM_CLK_FCC1,
|
|
CPM_CLK_FCC2,
|
|
CPM_CLK_FCC3,
|
|
CPM_CLK_SMC1,
|
|
CPM_CLK_SMC2,
|
|
};
|
|
|
|
enum cpm_clk {
|
|
CPM_CLK_NONE = 0,
|
|
CPM_BRG1, /* Baud Rate Generator 1 */
|
|
CPM_BRG2, /* Baud Rate Generator 2 */
|
|
CPM_BRG3, /* Baud Rate Generator 3 */
|
|
CPM_BRG4, /* Baud Rate Generator 4 */
|
|
CPM_BRG5, /* Baud Rate Generator 5 */
|
|
CPM_BRG6, /* Baud Rate Generator 6 */
|
|
CPM_BRG7, /* Baud Rate Generator 7 */
|
|
CPM_BRG8, /* Baud Rate Generator 8 */
|
|
CPM_CLK1, /* Clock 1 */
|
|
CPM_CLK2, /* Clock 2 */
|
|
CPM_CLK3, /* Clock 3 */
|
|
CPM_CLK4, /* Clock 4 */
|
|
CPM_CLK5, /* Clock 5 */
|
|
CPM_CLK6, /* Clock 6 */
|
|
CPM_CLK7, /* Clock 7 */
|
|
CPM_CLK8, /* Clock 8 */
|
|
CPM_CLK9, /* Clock 9 */
|
|
CPM_CLK10, /* Clock 10 */
|
|
CPM_CLK11, /* Clock 11 */
|
|
CPM_CLK12, /* Clock 12 */
|
|
CPM_CLK13, /* Clock 13 */
|
|
CPM_CLK14, /* Clock 14 */
|
|
CPM_CLK15, /* Clock 15 */
|
|
CPM_CLK16, /* Clock 16 */
|
|
CPM_CLK17, /* Clock 17 */
|
|
CPM_CLK18, /* Clock 18 */
|
|
CPM_CLK19, /* Clock 19 */
|
|
CPM_CLK20, /* Clock 20 */
|
|
CPM_CLK_DUMMY
|
|
};
|
|
|
|
extern int cpm2_clk_setup(enum cpm_clk_target target, int clock, int mode);
|
|
extern int cpm2_smc_clk_setup(enum cpm_clk_target target, int clock);
|
|
|
|
#define CPM_PIN_INPUT 0
|
|
#define CPM_PIN_OUTPUT 1
|
|
#define CPM_PIN_PRIMARY 0
|
|
#define CPM_PIN_SECONDARY 2
|
|
#define CPM_PIN_GPIO 4
|
|
#define CPM_PIN_OPENDRAIN 8
|
|
|
|
void cpm2_set_pin(int port, int pin, int flags);
|
|
|
|
#endif /* __CPM2__ */
|
|
#endif /* __KERNEL__ */
|