renegade-project/linux-next
2
0
Fork 0
mirror of https://github.com/edk2-porting/linux-next.git synced 2025-01-10 14:43:54 +08:00
Code
1dc89bb93c
linux-next/drivers/net/wireless/intersil/hostap/hostap_80211_tx.c
Greg Kroah-Hartman b24413180f License cleanup: add SPDX GPL-2.0 license identifier to files with no license 
Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine the correct license.

By default all files without license information are under the default
license of the kernel, which is GPL version 2.

Update the files which contain no license information with the 'GPL-2.0'
SPDX license identifier.  The SPDX identifier is a legally binding
shorthand, which can be used instead of the full boiler plate text.

This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne.

How this work was done:

Patches were generated and checked against linux-4.14-rc6 for a subset of
the use cases:
 - file had no licensing information it it.
 - file was a */uapi/* one with no licensing information in it,
 - file was a */uapi/* one with existing licensing information,

Further patches will be generated in subsequent months to fix up cases
where non-standard license headers were used, and references to license
had to be inferred by heuristics based on keywords.

The analysis to determine which SPDX License Identifier to be applied to
a file was done in a spreadsheet of side by side results from of the
output of two independent scanners (ScanCode & Windriver) producing SPDX
tag:value files created by Philippe Ombredanne.  Philippe prepared the
base worksheet, and did an initial spot review of a few 1000 files.

The 4.13 kernel was the starting point of the analysis with 60,537 files
assessed.  Kate Stewart did a file by file comparison of the scanner
results in the spreadsheet to determine which SPDX license identifier(s)
to be applied to the file. She confirmed any determination that was not
immediately clear with lawyers working with the Linux Foundation.

Criteria used to select files for SPDX license identifier tagging was:
 - Files considered eligible had to be source code files.
 - Make and config files were included as candidates if they contained >5
   lines of source
 - File already had some variant of a license header in it (even if <5
   lines).

All documentation files were explicitly excluded.

The following heuristics were used to determine which SPDX license
identifiers to apply.

 - when both scanners couldn't find any license traces, file was
   considered to have no license information in it, and the top level
   COPYING file license applied.

   For non */uapi/* files that summary was:

   SPDX license identifier                            # files
   ---------------------------------------------------|-------
   GPL-2.0                                              11139

   and resulted in the first patch in this series.

   If that file was a */uapi/* path one, it was "GPL-2.0 WITH
   Linux-syscall-note" otherwise it was "GPL-2.0".  Results of that was:

   SPDX license identifier                            # files
   ---------------------------------------------------|-------
   GPL-2.0 WITH Linux-syscall-note                        930

   and resulted in the second patch in this series.

 - if a file had some form of licensing information in it, and was one
   of the */uapi/* ones, it was denoted with the Linux-syscall-note if
   any GPL family license was found in the file or had no licensing in
   it (per prior point).  Results summary:

   SPDX license identifier                            # files
   ---------------------------------------------------|------
   GPL-2.0 WITH Linux-syscall-note                       270
   GPL-2.0+ WITH Linux-syscall-note                      169
   ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause)    21
   ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause)    17
   LGPL-2.1+ WITH Linux-syscall-note                      15
   GPL-1.0+ WITH Linux-syscall-note                       14
   ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause)    5
   LGPL-2.0+ WITH Linux-syscall-note                       4
   LGPL-2.1 WITH Linux-syscall-note                        3
   ((GPL-2.0 WITH Linux-syscall-note) OR MIT)              3
   ((GPL-2.0 WITH Linux-syscall-note) AND MIT)             1

   and that resulted in the third patch in this series.

 - when the two scanners agreed on the detected license(s), that became
   the concluded license(s).

 - when there was disagreement between the two scanners (one detected a
   license but the other didn't, or they both detected different
   licenses) a manual inspection of the file occurred.

 - In most cases a manual inspection of the information in the file
   resulted in a clear resolution of the license that should apply (and
   which scanner probably needed to revisit its heuristics).

 - When it was not immediately clear, the license identifier was
   confirmed with lawyers working with the Linux Foundation.

 - If there was any question as to the appropriate license identifier,
   the file was flagged for further research and to be revisited later
   in time.

In total, over 70 hours of logged manual review was done on the
spreadsheet to determine the SPDX license identifiers to apply to the
source files by Kate, Philippe, Thomas and, in some cases, confirmation
by lawyers working with the Linux Foundation.

Kate also obtained a third independent scan of the 4.13 code base from
FOSSology, and compared selected files where the other two scanners
disagreed against that SPDX file, to see if there was new insights.  The
Windriver scanner is based on an older version of FOSSology in part, so
they are related.

Thomas did random spot checks in about 500 files from the spreadsheets
for the uapi headers and agreed with SPDX license identifier in the
files he inspected. For the non-uapi files Thomas did random spot checks
in about 15000 files.

In initial set of patches against 4.14-rc6, 3 files were found to have
copy/paste license identifier errors, and have been fixed to reflect the
correct identifier.

Additionally Philippe spent 10 hours this week doing a detailed manual
inspection and review of the 12,461 patched files from the initial patch
version early this week with:
 - a full scancode scan run, collecting the matched texts, detected
   license ids and scores
 - reviewing anything where there was a license detected (about 500+
   files) to ensure that the applied SPDX license was correct
 - reviewing anything where there was no detection but the patch license
   was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied
   SPDX license was correct

This produced a worksheet with 20 files needing minor correction.  This
worksheet was then exported into 3 different .csv files for the
different types of files to be modified.

These .csv files were then reviewed by Greg.  Thomas wrote a script to
parse the csv files and add the proper SPDX tag to the file, in the
format that the file expected.  This script was further refined by Greg
based on the output to detect more types of files automatically and to
distinguish between header and source .c files (which need different
comment types.)  Finally Greg ran the script using the .csv files to
generate the patches.

Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-02 11:10:55 +01:00

555 lines
16 KiB
C
Raw Blame History

// SPDX-License-Identifier: GPL-2.0
#include <linux/slab.h>
#include <linux/export.h>
#include <linux/etherdevice.h>
#include "hostap_80211.h"
#include "hostap_common.h"
#include "hostap_wlan.h"
#include "hostap.h"
#include "hostap_ap.h"
/* See IEEE 802.1H for LLC/SNAP encapsulation/decapsulation */
/* Ethernet-II snap header (RFC1042 for most EtherTypes) */
static unsigned char rfc1042_header[] =
{ 0xaa, 0xaa, 0x03, 0x00, 0x00, 0x00 };
/* Bridge-Tunnel header (for EtherTypes ETH_P_AARP and ETH_P_IPX) */
static unsigned char bridge_tunnel_header[] =
{ 0xaa, 0xaa, 0x03, 0x00, 0x00, 0xf8 };
/* No encapsulation header if EtherType < 0x600 (=length) */
void hostap_dump_tx_80211(const char *name, struct sk_buff *skb)
{
struct ieee80211_hdr *hdr;
u16 fc;
hdr = (struct ieee80211_hdr *) skb->data;
printk(KERN_DEBUG "%s: TX len=%d jiffies=%ld\n",
name, skb->len, jiffies);
if (skb->len < 2)
return;
fc = le16_to_cpu(hdr->frame_control);
printk(KERN_DEBUG " FC=0x%04x (type=%d:%d)%s%s",
fc, (fc & IEEE80211_FCTL_FTYPE) >> 2,
(fc & IEEE80211_FCTL_STYPE) >> 4,
fc & IEEE80211_FCTL_TODS ? " [ToDS]" : "",
fc & IEEE80211_FCTL_FROMDS ? " [FromDS]" : "");
if (skb->len < IEEE80211_DATA_HDR3_LEN) {
printk("\n");
return;
}
printk(" dur=0x%04x seq=0x%04x\n", le16_to_cpu(hdr->duration_id),
le16_to_cpu(hdr->seq_ctrl));
printk(KERN_DEBUG " A1=%pM", hdr->addr1);
printk(" A2=%pM", hdr->addr2);
printk(" A3=%pM", hdr->addr3);
if (skb->len >= 30)
printk(" A4=%pM", hdr->addr4);
printk("\n");
}
/* hard_start_xmit function for data interfaces (wlan#, wlan#wds#, wlan#sta)
* Convert Ethernet header into a suitable IEEE 802.11 header depending on
* device configuration. */
netdev_tx_t hostap_data_start_xmit(struct sk_buff *skb,
struct net_device *dev)
{
struct hostap_interface *iface;
local_info_t *local;
int need_headroom, need_tailroom = 0;
struct ieee80211_hdr hdr;
u16 fc, ethertype = 0;
enum {
WDS_NO = 0, WDS_OWN_FRAME, WDS_COMPLIANT_FRAME
} use_wds = WDS_NO;
u8 *encaps_data;
int hdr_len, encaps_len, skip_header_bytes;
int to_assoc_ap = 0;
struct hostap_skb_tx_data *meta;
iface = netdev_priv(dev);
local = iface->local;
if (skb->len < ETH_HLEN) {
printk(KERN_DEBUG "%s: hostap_data_start_xmit: short skb "
"(len=%d)\n", dev->name, skb->len);
kfree_skb(skb);
return NETDEV_TX_OK;
}
if (local->ddev != dev) {
use_wds = (local->iw_mode == IW_MODE_MASTER &&
!(local->wds_type & HOSTAP_WDS_STANDARD_FRAME)) ?
WDS_OWN_FRAME : WDS_COMPLIANT_FRAME;
if (dev == local->stadev) {
to_assoc_ap = 1;
use_wds = WDS_NO;
} else if (dev == local->apdev) {
printk(KERN_DEBUG "%s: prism2_tx: trying to use "
"AP device with Ethernet net dev\n", dev->name);
kfree_skb(skb);
return NETDEV_TX_OK;
}
} else {
if (local->iw_mode == IW_MODE_REPEAT) {
printk(KERN_DEBUG "%s: prism2_tx: trying to use "
"non-WDS link in Repeater mode\n", dev->name);
kfree_skb(skb);
return NETDEV_TX_OK;
} else if (local->iw_mode == IW_MODE_INFRA &&
(local->wds_type & HOSTAP_WDS_AP_CLIENT) &&
!ether_addr_equal(skb->data + ETH_ALEN, dev->dev_addr)) {
/* AP client mode: send frames with foreign src addr
* using 4-addr WDS frames */
use_wds = WDS_COMPLIANT_FRAME;
}
}
/* Incoming skb->data: dst_addr[6], src_addr[6], proto[2], payload
* ==>
* Prism2 TX frame with 802.11 header:
* txdesc (address order depending on used mode; includes dst_addr and
* src_addr), possible encapsulation (RFC1042/Bridge-Tunnel;
* proto[2], payload {, possible addr4[6]} */
ethertype = (skb->data[12] << 8) | skb->data[13];
memset(&hdr, 0, sizeof(hdr));
/* Length of data after IEEE 802.11 header */
encaps_data = NULL;
encaps_len = 0;
skip_header_bytes = ETH_HLEN;
if (ethertype == ETH_P_AARP || ethertype == ETH_P_IPX) {
encaps_data = bridge_tunnel_header;
encaps_len = sizeof(bridge_tunnel_header);
skip_header_bytes -= 2;
} else if (ethertype >= 0x600) {
encaps_data = rfc1042_header;
encaps_len = sizeof(rfc1042_header);
skip_header_bytes -= 2;
}
fc = IEEE80211_FTYPE_DATA | IEEE80211_STYPE_DATA;
hdr_len = IEEE80211_DATA_HDR3_LEN;
if (use_wds != WDS_NO) {
/* Note! Prism2 station firmware has problems with sending real
* 802.11 frames with four addresses; until these problems can
* be fixed or worked around, 4-addr frames needed for WDS are
* using incompatible format: FromDS flag is not set and the
* fourth address is added after the frame payload; it is
* assumed, that the receiving station knows how to handle this
* frame format */
if (use_wds == WDS_COMPLIANT_FRAME) {
fc |= IEEE80211_FCTL_FROMDS | IEEE80211_FCTL_TODS;
/* From&To DS: Addr1 = RA, Addr2 = TA, Addr3 = DA,
* Addr4 = SA */
skb_copy_from_linear_data_offset(skb, ETH_ALEN,
&hdr.addr4, ETH_ALEN);
hdr_len += ETH_ALEN;
} else {
/* bogus 4-addr format to workaround Prism2 station
* f/w bug */
fc |= IEEE80211_FCTL_TODS;
/* From DS: Addr1 = DA (used as RA),
* Addr2 = BSSID (used as TA), Addr3 = SA (used as DA),
*/
/* SA from skb->data + ETH_ALEN will be added after
* frame payload; use hdr.addr4 as a temporary buffer
*/
skb_copy_from_linear_data_offset(skb, ETH_ALEN,
&hdr.addr4, ETH_ALEN);
need_tailroom += ETH_ALEN;
}
/* send broadcast and multicast frames to broadcast RA, if
* configured; otherwise, use unicast RA of the WDS link */
if ((local->wds_type & HOSTAP_WDS_BROADCAST_RA) &&
is_multicast_ether_addr(skb->data))
eth_broadcast_addr(hdr.addr1);
else if (iface->type == HOSTAP_INTERFACE_WDS)
memcpy(&hdr.addr1, iface->u.wds.remote_addr,
ETH_ALEN);
else
memcpy(&hdr.addr1, local->bssid, ETH_ALEN);
memcpy(&hdr.addr2, dev->dev_addr, ETH_ALEN);
skb_copy_from_linear_data(skb, &hdr.addr3, ETH_ALEN);
} else if (local->iw_mode == IW_MODE_MASTER && !to_assoc_ap) {
fc |= IEEE80211_FCTL_FROMDS;
/* From DS: Addr1 = DA, Addr2 = BSSID, Addr3 = SA */
skb_copy_from_linear_data(skb, &hdr.addr1, ETH_ALEN);
memcpy(&hdr.addr2, dev->dev_addr, ETH_ALEN);
skb_copy_from_linear_data_offset(skb, ETH_ALEN, &hdr.addr3,
ETH_ALEN);
} else if (local->iw_mode == IW_MODE_INFRA || to_assoc_ap) {
fc |= IEEE80211_FCTL_TODS;
/* To DS: Addr1 = BSSID, Addr2 = SA, Addr3 = DA */
memcpy(&hdr.addr1, to_assoc_ap ?
local->assoc_ap_addr : local->bssid, ETH_ALEN);
skb_copy_from_linear_data_offset(skb, ETH_ALEN, &hdr.addr2,
ETH_ALEN);
skb_copy_from_linear_data(skb, &hdr.addr3, ETH_ALEN);
} else if (local->iw_mode == IW_MODE_ADHOC) {
/* not From/To DS: Addr1 = DA, Addr2 = SA, Addr3 = BSSID */
skb_copy_from_linear_data(skb, &hdr.addr1, ETH_ALEN);
skb_copy_from_linear_data_offset(skb, ETH_ALEN, &hdr.addr2,
ETH_ALEN);
memcpy(&hdr.addr3, local->bssid, ETH_ALEN);
}
hdr.frame_control = cpu_to_le16(fc);
skb_pull(skb, skip_header_bytes);
need_headroom = local->func->need_tx_headroom + hdr_len + encaps_len;
if (skb_tailroom(skb) < need_tailroom) {
skb = skb_unshare(skb, GFP_ATOMIC);
if (skb == NULL) {
iface->stats.tx_dropped++;
return NETDEV_TX_OK;
}
if (pskb_expand_head(skb, need_headroom, need_tailroom,
GFP_ATOMIC)) {
kfree_skb(skb);
iface->stats.tx_dropped++;
return NETDEV_TX_OK;
}
} else if (skb_headroom(skb) < need_headroom) {
struct sk_buff *tmp = skb;
skb = skb_realloc_headroom(skb, need_headroom);
kfree_skb(tmp);
if (skb == NULL) {
iface->stats.tx_dropped++;
return NETDEV_TX_OK;
}
} else {
skb = skb_unshare(skb, GFP_ATOMIC);
if (skb == NULL) {
iface->stats.tx_dropped++;
return NETDEV_TX_OK;
}
}
if (encaps_data)
memcpy(skb_push(skb, encaps_len), encaps_data, encaps_len);
memcpy(skb_push(skb, hdr_len), &hdr, hdr_len);
if (use_wds == WDS_OWN_FRAME) {
skb_put_data(skb, &hdr.addr4, ETH_ALEN);
}
iface->stats.tx_packets++;
iface->stats.tx_bytes += skb->len;
skb_reset_mac_header(skb);
meta = (struct hostap_skb_tx_data *) skb->cb;
memset(meta, 0, sizeof(*meta));
meta->magic = HOSTAP_SKB_TX_DATA_MAGIC;
if (use_wds)
meta->flags |= HOSTAP_TX_FLAGS_WDS;
meta->ethertype = ethertype;
meta->iface = iface;
/* Send IEEE 802.11 encapsulated frame using the master radio device */
skb->dev = local->dev;
dev_queue_xmit(skb);
return NETDEV_TX_OK;
}
/* hard_start_xmit function for hostapd wlan#ap interfaces */
netdev_tx_t hostap_mgmt_start_xmit(struct sk_buff *skb,
struct net_device *dev)
{
struct hostap_interface *iface;
local_info_t *local;
struct hostap_skb_tx_data *meta;
struct ieee80211_hdr *hdr;
u16 fc;
iface = netdev_priv(dev);
local = iface->local;
if (skb->len < 10) {
printk(KERN_DEBUG "%s: hostap_mgmt_start_xmit: short skb "
"(len=%d)\n", dev->name, skb->len);
kfree_skb(skb);
return NETDEV_TX_OK;
}
iface->stats.tx_packets++;
iface->stats.tx_bytes += skb->len;
meta = (struct hostap_skb_tx_data *) skb->cb;
memset(meta, 0, sizeof(*meta));
meta->magic = HOSTAP_SKB_TX_DATA_MAGIC;
meta->iface = iface;
if (skb->len >= IEEE80211_DATA_HDR3_LEN + sizeof(rfc1042_header) + 2) {
hdr = (struct ieee80211_hdr *) skb->data;
fc = le16_to_cpu(hdr->frame_control);
if (ieee80211_is_data(hdr->frame_control) &&
(fc & IEEE80211_FCTL_STYPE) == IEEE80211_STYPE_DATA) {
u8 *pos = &skb->data[IEEE80211_DATA_HDR3_LEN +
sizeof(rfc1042_header)];
meta->ethertype = (pos[0] << 8) | pos[1];
}
}
/* Send IEEE 802.11 encapsulated frame using the master radio device */
skb->dev = local->dev;
dev_queue_xmit(skb);
return NETDEV_TX_OK;
}
/* Called only from software IRQ */
static struct sk_buff * hostap_tx_encrypt(struct sk_buff *skb,
struct lib80211_crypt_data *crypt)
{
struct hostap_interface *iface;
local_info_t *local;
struct ieee80211_hdr *hdr;
int prefix_len, postfix_len, hdr_len, res;
iface = netdev_priv(skb->dev);
local = iface->local;
if (skb->len < IEEE80211_DATA_HDR3_LEN) {
kfree_skb(skb);
return NULL;
}
if (local->tkip_countermeasures &&
strcmp(crypt->ops->name, "TKIP") == 0) {
hdr = (struct ieee80211_hdr *) skb->data;
if (net_ratelimit()) {
printk(KERN_DEBUG "%s: TKIP countermeasures: dropped "
"TX packet to %pM\n",
local->dev->name, hdr->addr1);
}
kfree_skb(skb);
return NULL;
}
skb = skb_unshare(skb, GFP_ATOMIC);
if (skb == NULL)
return NULL;
prefix_len = crypt->ops->extra_mpdu_prefix_len +
crypt->ops->extra_msdu_prefix_len;
postfix_len = crypt->ops->extra_mpdu_postfix_len +
crypt->ops->extra_msdu_postfix_len;
if ((skb_headroom(skb) < prefix_len ||
skb_tailroom(skb) < postfix_len) &&
pskb_expand_head(skb, prefix_len, postfix_len, GFP_ATOMIC)) {
kfree_skb(skb);
return NULL;
}
hdr = (struct ieee80211_hdr *) skb->data;
hdr_len = hostap_80211_get_hdrlen(hdr->frame_control);
/* Host-based IEEE 802.11 fragmentation for TX is not yet supported, so
* call both MSDU and MPDU encryption functions from here. */
atomic_inc(&crypt->refcnt);
res = 0;
if (crypt->ops->encrypt_msdu)
res = crypt->ops->encrypt_msdu(skb, hdr_len, crypt->priv);
if (res == 0 && crypt->ops->encrypt_mpdu)
res = crypt->ops->encrypt_mpdu(skb, hdr_len, crypt->priv);
atomic_dec(&crypt->refcnt);
if (res < 0) {
kfree_skb(skb);
return NULL;
}
return skb;
}
/* hard_start_xmit function for master radio interface wifi#.
* AP processing (TX rate control, power save buffering, etc.).
* Use hardware TX function to send the frame. */
netdev_tx_t hostap_master_start_xmit(struct sk_buff *skb,
struct net_device *dev)
{
struct hostap_interface *iface;
local_info_t *local;
netdev_tx_t ret = NETDEV_TX_BUSY;
u16 fc;
struct hostap_tx_data tx;
ap_tx_ret tx_ret;
struct hostap_skb_tx_data *meta;
int no_encrypt = 0;
struct ieee80211_hdr *hdr;
iface = netdev_priv(dev);
local = iface->local;
tx.skb = skb;
tx.sta_ptr = NULL;
meta = (struct hostap_skb_tx_data *) skb->cb;
if (meta->magic != HOSTAP_SKB_TX_DATA_MAGIC) {
printk(KERN_DEBUG "%s: invalid skb->cb magic (0x%08x, "
"expected 0x%08x)\n",
dev->name, meta->magic, HOSTAP_SKB_TX_DATA_MAGIC);
ret = NETDEV_TX_OK;
iface->stats.tx_dropped++;
goto fail;
}
if (local->host_encrypt) {
/* Set crypt to default algorithm and key; will be replaced in
* AP code if STA has own alg/key */
tx.crypt = local->crypt_info.crypt[local->crypt_info.tx_keyidx];
tx.host_encrypt = 1;
} else {
tx.crypt = NULL;
tx.host_encrypt = 0;
}
if (skb->len < 24) {
printk(KERN_DEBUG "%s: hostap_master_start_xmit: short skb "
"(len=%d)\n", dev->name, skb->len);
ret = NETDEV_TX_OK;
iface->stats.tx_dropped++;
goto fail;
}
/* FIX (?):
* Wi-Fi 802.11b test plan suggests that AP should ignore power save
* bit in authentication and (re)association frames and assume tha
* STA remains awake for the response. */
tx_ret = hostap_handle_sta_tx(local, &tx);
skb = tx.skb;
meta = (struct hostap_skb_tx_data *) skb->cb;
hdr = (struct ieee80211_hdr *) skb->data;
fc = le16_to_cpu(hdr->frame_control);
switch (tx_ret) {
case AP_TX_CONTINUE:
break;
case AP_TX_CONTINUE_NOT_AUTHORIZED:
if (local->ieee_802_1x &&
ieee80211_is_data(hdr->frame_control) &&
meta->ethertype != ETH_P_PAE &&
!(meta->flags & HOSTAP_TX_FLAGS_WDS)) {
printk(KERN_DEBUG "%s: dropped frame to unauthorized "
"port (IEEE 802.1X): ethertype=0x%04x\n",
dev->name, meta->ethertype);
hostap_dump_tx_80211(dev->name, skb);
ret = NETDEV_TX_OK; /* drop packet */
iface->stats.tx_dropped++;
goto fail;
}
break;
case AP_TX_DROP:
ret = NETDEV_TX_OK; /* drop packet */
iface->stats.tx_dropped++;
goto fail;
case AP_TX_RETRY:
goto fail;
case AP_TX_BUFFERED:
/* do not free skb here, it will be freed when the
* buffered frame is sent/timed out */
ret = NETDEV_TX_OK;
goto tx_exit;
}
/* Request TX callback if protocol version is 2 in 802.11 header;
* this version 2 is a special case used between hostapd and kernel
* driver */
if (((fc & IEEE80211_FCTL_VERS) == BIT(1)) &&
local->ap && local->ap->tx_callback_idx && meta->tx_cb_idx == 0) {
meta->tx_cb_idx = local->ap->tx_callback_idx;
/* remove special version from the frame header */
fc &= ~IEEE80211_FCTL_VERS;
hdr->frame_control = cpu_to_le16(fc);
}
if (!ieee80211_is_data(hdr->frame_control)) {
no_encrypt = 1;
tx.crypt = NULL;
}
if (local->ieee_802_1x && meta->ethertype == ETH_P_PAE && tx.crypt &&
!(fc & IEEE80211_FCTL_PROTECTED)) {
no_encrypt = 1;
PDEBUG(DEBUG_EXTRA2, "%s: TX: IEEE 802.1X - passing "
"unencrypted EAPOL frame\n", dev->name);
tx.crypt = NULL; /* no encryption for IEEE 802.1X frames */
}
if (tx.crypt && (!tx.crypt->ops || !tx.crypt->ops->encrypt_mpdu))
tx.crypt = NULL;
else if ((tx.crypt ||
local->crypt_info.crypt[local->crypt_info.tx_keyidx]) &&
!no_encrypt) {
/* Add ISWEP flag both for firmware and host based encryption
*/
fc |= IEEE80211_FCTL_PROTECTED;
hdr->frame_control = cpu_to_le16(fc);
} else if (local->drop_unencrypted &&
ieee80211_is_data(hdr->frame_control) &&
meta->ethertype != ETH_P_PAE) {
if (net_ratelimit()) {
printk(KERN_DEBUG "%s: dropped unencrypted TX data "
"frame (drop_unencrypted=1)\n", dev->name);
}
iface->stats.tx_dropped++;
ret = NETDEV_TX_OK;
goto fail;
}
if (tx.crypt) {
skb = hostap_tx_encrypt(skb, tx.crypt);
if (skb == NULL) {
printk(KERN_DEBUG "%s: TX - encryption failed\n",
dev->name);
ret = NETDEV_TX_OK;
goto fail;
}
meta = (struct hostap_skb_tx_data *) skb->cb;
if (meta->magic != HOSTAP_SKB_TX_DATA_MAGIC) {
printk(KERN_DEBUG "%s: invalid skb->cb magic (0x%08x, "
"expected 0x%08x) after hostap_tx_encrypt\n",
dev->name, meta->magic,
HOSTAP_SKB_TX_DATA_MAGIC);
ret = NETDEV_TX_OK;
iface->stats.tx_dropped++;
goto fail;
}
}
if (local->func->tx == NULL || local->func->tx(skb, dev)) {
ret = NETDEV_TX_OK;
iface->stats.tx_dropped++;
} else {
ret = NETDEV_TX_OK;
iface->stats.tx_packets++;
iface->stats.tx_bytes += skb->len;
}
fail:
if (ret == NETDEV_TX_OK && skb)
dev_kfree_skb(skb);
tx_exit:
if (tx.sta_ptr)
hostap_handle_sta_release(tx.sta_ptr);
return ret;
}
EXPORT_SYMBOL(hostap_master_start_xmit);
View Git Blame Copy Permalink