2
0
mirror of https://github.com/edk2-porting/linux-next.git synced 2024-12-23 20:53:53 +08:00
linux-next/drivers/mfd/timberdale.h
Richard Röjfors c091575c8b [media] mfd: Add timberdale video-in driver to timberdale
This patch defines platform data for the video-in driver
and adds it to all configurations of timberdale.

Signed-off-by: Richard Röjfors <richard.rojfors@pelagicore.com>
Acked-by: Samuel Ortiz <sameo@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-12-29 08:16:46 -02:00

143 lines
3.4 KiB
C

/*
* timberdale.h timberdale FPGA MFD driver defines
* Copyright (c) 2009 Intel Corporation
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*/
/* Supports:
* Timberdale FPGA
*/
#ifndef MFD_TIMBERDALE_H
#define MFD_TIMBERDALE_H
#define DRV_VERSION "0.3"
/* This driver only support versions >= 3.8 and < 4.0 */
#define TIMB_SUPPORTED_MAJOR 3
/* This driver only support minor >= 8 */
#define TIMB_REQUIRED_MINOR 8
/* Registers of the control area */
#define TIMB_REV_MAJOR 0x00
#define TIMB_REV_MINOR 0x04
#define TIMB_HW_CONFIG 0x08
#define TIMB_SW_RST 0x40
/* bits in the TIMB_HW_CONFIG register */
#define TIMB_HW_CONFIG_SPI_8BIT 0x80
#define TIMB_HW_VER_MASK 0x0f
#define TIMB_HW_VER0 0x00
#define TIMB_HW_VER1 0x01
#define TIMB_HW_VER2 0x02
#define TIMB_HW_VER3 0x03
#define OCORESOFFSET 0x0
#define OCORESEND 0x1f
#define SPIOFFSET 0x80
#define SPIEND 0xff
#define UARTLITEOFFSET 0x100
#define UARTLITEEND 0x10f
#define RDSOFFSET 0x180
#define RDSEND 0x183
#define ETHOFFSET 0x300
#define ETHEND 0x3ff
#define GPIOOFFSET 0x400
#define GPIOEND 0x7ff
#define CHIPCTLOFFSET 0x800
#define CHIPCTLEND 0x8ff
#define CHIPCTLSIZE (CHIPCTLEND - CHIPCTLOFFSET + 1)
#define INTCOFFSET 0xc00
#define INTCEND 0xfff
#define INTCSIZE (INTCEND - INTCOFFSET)
#define MOSTOFFSET 0x1000
#define MOSTEND 0x13ff
#define UARTOFFSET 0x1400
#define UARTEND 0x17ff
#define XIICOFFSET 0x1800
#define XIICEND 0x19ff
#define I2SOFFSET 0x1C00
#define I2SEND 0x1fff
#define LOGIWOFFSET 0x30000
#define LOGIWEND 0x37fff
#define MLCOREOFFSET 0x40000
#define MLCOREEND 0x43fff
#define DMAOFFSET 0x01000000
#define DMAEND 0x013fffff
/* SDHC0 is placed in PCI bar 1 */
#define SDHC0OFFSET 0x00
#define SDHC0END 0xff
/* SDHC1 is placed in PCI bar 2 */
#define SDHC1OFFSET 0x00
#define SDHC1END 0xff
#define PCI_VENDOR_ID_TIMB 0x10ee
#define PCI_DEVICE_ID_TIMB 0xa123
#define IRQ_TIMBERDALE_INIC 0
#define IRQ_TIMBERDALE_MLB 1
#define IRQ_TIMBERDALE_GPIO 2
#define IRQ_TIMBERDALE_I2C 3
#define IRQ_TIMBERDALE_UART 4
#define IRQ_TIMBERDALE_DMA 5
#define IRQ_TIMBERDALE_I2S 6
#define IRQ_TIMBERDALE_TSC_INT 7
#define IRQ_TIMBERDALE_SDHC 8
#define IRQ_TIMBERDALE_ADV7180 9
#define IRQ_TIMBERDALE_ETHSW_IF 10
#define IRQ_TIMBERDALE_SPI 11
#define IRQ_TIMBERDALE_UARTLITE 12
#define IRQ_TIMBERDALE_MLCORE 13
#define IRQ_TIMBERDALE_MLCORE_BUF 14
#define IRQ_TIMBERDALE_RDS 15
#define TIMBERDALE_NR_IRQS 16
#define GPIO_PIN_ASCB 8
#define GPIO_PIN_INIC_RST 14
#define GPIO_PIN_BT_RST 15
#define GPIO_NR_PINS 16
/* DMA Channels */
#define DMA_UART_RX 0
#define DMA_UART_TX 1
#define DMA_MLB_RX 2
#define DMA_MLB_TX 3
#define DMA_VIDEO_RX 4
#define DMA_VIDEO_DROP 5
#define DMA_SDHCI_RX 6
#define DMA_SDHCI_TX 7
#define DMA_ETH_RX 8
#define DMA_ETH_TX 9
#endif