mirror of
https://github.com/edk2-porting/linux-next.git
synced 2024-12-23 12:43:55 +08:00
d8633c1da1
PWM timers use pclk("timers" clk) as parent clk. If this pclk is the disabled state when PWM driver is probed, then it causes wrong read and write operation about registers of PWM. Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
421 lines
8.6 KiB
C
421 lines
8.6 KiB
C
/* arch/arm/plat-s3c/pwm.c
|
|
*
|
|
* Copyright (c) 2007 Ben Dooks
|
|
* Copyright (c) 2008 Simtec Electronics
|
|
* Ben Dooks <ben@simtec.co.uk>, <ben-linux@fluff.org>
|
|
*
|
|
* S3C series PWM device core
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License as published by
|
|
* the Free Software Foundation; either version 2 of the License.
|
|
*/
|
|
|
|
#include <linux/module.h>
|
|
#include <linux/kernel.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/slab.h>
|
|
#include <linux/err.h>
|
|
#include <linux/clk.h>
|
|
#include <linux/io.h>
|
|
#include <linux/pwm.h>
|
|
|
|
#include <mach/map.h>
|
|
|
|
#include <plat/regs-timer.h>
|
|
|
|
struct pwm_device {
|
|
struct list_head list;
|
|
struct platform_device *pdev;
|
|
|
|
struct clk *clk_div;
|
|
struct clk *clk;
|
|
const char *label;
|
|
|
|
unsigned int period_ns;
|
|
unsigned int duty_ns;
|
|
|
|
unsigned char tcon_base;
|
|
unsigned char running;
|
|
unsigned char use_count;
|
|
unsigned char pwm_id;
|
|
};
|
|
|
|
#define pwm_dbg(_pwm, msg...) dev_dbg(&(_pwm)->pdev->dev, msg)
|
|
|
|
static struct clk *clk_scaler[2];
|
|
|
|
static inline int pwm_is_tdiv(struct pwm_device *pwm)
|
|
{
|
|
return clk_get_parent(pwm->clk) == pwm->clk_div;
|
|
}
|
|
|
|
static DEFINE_MUTEX(pwm_lock);
|
|
static LIST_HEAD(pwm_list);
|
|
|
|
struct pwm_device *pwm_request(int pwm_id, const char *label)
|
|
{
|
|
struct pwm_device *pwm;
|
|
int found = 0;
|
|
|
|
mutex_lock(&pwm_lock);
|
|
|
|
list_for_each_entry(pwm, &pwm_list, list) {
|
|
if (pwm->pwm_id == pwm_id) {
|
|
found = 1;
|
|
break;
|
|
}
|
|
}
|
|
|
|
if (found) {
|
|
if (pwm->use_count == 0) {
|
|
pwm->use_count = 1;
|
|
pwm->label = label;
|
|
} else
|
|
pwm = ERR_PTR(-EBUSY);
|
|
} else
|
|
pwm = ERR_PTR(-ENOENT);
|
|
|
|
mutex_unlock(&pwm_lock);
|
|
return pwm;
|
|
}
|
|
|
|
EXPORT_SYMBOL(pwm_request);
|
|
|
|
|
|
void pwm_free(struct pwm_device *pwm)
|
|
{
|
|
mutex_lock(&pwm_lock);
|
|
|
|
if (pwm->use_count) {
|
|
pwm->use_count--;
|
|
pwm->label = NULL;
|
|
} else
|
|
printk(KERN_ERR "PWM%d device already freed\n", pwm->pwm_id);
|
|
|
|
mutex_unlock(&pwm_lock);
|
|
}
|
|
|
|
EXPORT_SYMBOL(pwm_free);
|
|
|
|
#define pwm_tcon_start(pwm) (1 << (pwm->tcon_base + 0))
|
|
#define pwm_tcon_invert(pwm) (1 << (pwm->tcon_base + 2))
|
|
#define pwm_tcon_autoreload(pwm) (1 << (pwm->tcon_base + 3))
|
|
#define pwm_tcon_manulupdate(pwm) (1 << (pwm->tcon_base + 1))
|
|
|
|
int pwm_enable(struct pwm_device *pwm)
|
|
{
|
|
unsigned long flags;
|
|
unsigned long tcon;
|
|
|
|
local_irq_save(flags);
|
|
|
|
tcon = __raw_readl(S3C2410_TCON);
|
|
tcon |= pwm_tcon_start(pwm);
|
|
__raw_writel(tcon, S3C2410_TCON);
|
|
|
|
local_irq_restore(flags);
|
|
|
|
pwm->running = 1;
|
|
return 0;
|
|
}
|
|
|
|
EXPORT_SYMBOL(pwm_enable);
|
|
|
|
void pwm_disable(struct pwm_device *pwm)
|
|
{
|
|
unsigned long flags;
|
|
unsigned long tcon;
|
|
|
|
local_irq_save(flags);
|
|
|
|
tcon = __raw_readl(S3C2410_TCON);
|
|
tcon &= ~pwm_tcon_start(pwm);
|
|
__raw_writel(tcon, S3C2410_TCON);
|
|
|
|
local_irq_restore(flags);
|
|
|
|
pwm->running = 0;
|
|
}
|
|
|
|
EXPORT_SYMBOL(pwm_disable);
|
|
|
|
static unsigned long pwm_calc_tin(struct pwm_device *pwm, unsigned long freq)
|
|
{
|
|
unsigned long tin_parent_rate;
|
|
unsigned int div;
|
|
|
|
tin_parent_rate = clk_get_rate(clk_get_parent(pwm->clk_div));
|
|
pwm_dbg(pwm, "tin parent at %lu\n", tin_parent_rate);
|
|
|
|
for (div = 2; div <= 16; div *= 2) {
|
|
if ((tin_parent_rate / (div << 16)) < freq)
|
|
return tin_parent_rate / div;
|
|
}
|
|
|
|
return tin_parent_rate / 16;
|
|
}
|
|
|
|
#define NS_IN_HZ (1000000000UL)
|
|
|
|
int pwm_config(struct pwm_device *pwm, int duty_ns, int period_ns)
|
|
{
|
|
unsigned long tin_rate;
|
|
unsigned long tin_ns;
|
|
unsigned long period;
|
|
unsigned long flags;
|
|
unsigned long tcon;
|
|
unsigned long tcnt;
|
|
long tcmp;
|
|
|
|
/* We currently avoid using 64bit arithmetic by using the
|
|
* fact that anything faster than 1Hz is easily representable
|
|
* by 32bits. */
|
|
|
|
if (period_ns > NS_IN_HZ || duty_ns > NS_IN_HZ)
|
|
return -ERANGE;
|
|
|
|
if (duty_ns > period_ns)
|
|
return -EINVAL;
|
|
|
|
if (period_ns == pwm->period_ns &&
|
|
duty_ns == pwm->duty_ns)
|
|
return 0;
|
|
|
|
/* The TCMP and TCNT can be read without a lock, they're not
|
|
* shared between the timers. */
|
|
|
|
tcmp = __raw_readl(S3C2410_TCMPB(pwm->pwm_id));
|
|
tcnt = __raw_readl(S3C2410_TCNTB(pwm->pwm_id));
|
|
|
|
period = NS_IN_HZ / period_ns;
|
|
|
|
pwm_dbg(pwm, "duty_ns=%d, period_ns=%d (%lu)\n",
|
|
duty_ns, period_ns, period);
|
|
|
|
/* Check to see if we are changing the clock rate of the PWM */
|
|
|
|
if (pwm->period_ns != period_ns) {
|
|
if (pwm_is_tdiv(pwm)) {
|
|
tin_rate = pwm_calc_tin(pwm, period);
|
|
clk_set_rate(pwm->clk_div, tin_rate);
|
|
} else
|
|
tin_rate = clk_get_rate(pwm->clk);
|
|
|
|
pwm->period_ns = period_ns;
|
|
|
|
pwm_dbg(pwm, "tin_rate=%lu\n", tin_rate);
|
|
|
|
tin_ns = NS_IN_HZ / tin_rate;
|
|
tcnt = period_ns / tin_ns;
|
|
} else
|
|
tin_ns = NS_IN_HZ / clk_get_rate(pwm->clk);
|
|
|
|
/* Note, counters count down */
|
|
|
|
tcmp = duty_ns / tin_ns;
|
|
tcmp = tcnt - tcmp;
|
|
/* the pwm hw only checks the compare register after a decrement,
|
|
so the pin never toggles if tcmp = tcnt */
|
|
if (tcmp == tcnt)
|
|
tcmp--;
|
|
|
|
pwm_dbg(pwm, "tin_ns=%lu, tcmp=%ld/%lu\n", tin_ns, tcmp, tcnt);
|
|
|
|
if (tcmp < 0)
|
|
tcmp = 0;
|
|
|
|
/* Update the PWM register block. */
|
|
|
|
local_irq_save(flags);
|
|
|
|
__raw_writel(tcmp, S3C2410_TCMPB(pwm->pwm_id));
|
|
__raw_writel(tcnt, S3C2410_TCNTB(pwm->pwm_id));
|
|
|
|
tcon = __raw_readl(S3C2410_TCON);
|
|
tcon |= pwm_tcon_manulupdate(pwm);
|
|
tcon |= pwm_tcon_autoreload(pwm);
|
|
__raw_writel(tcon, S3C2410_TCON);
|
|
|
|
tcon &= ~pwm_tcon_manulupdate(pwm);
|
|
__raw_writel(tcon, S3C2410_TCON);
|
|
|
|
local_irq_restore(flags);
|
|
|
|
return 0;
|
|
}
|
|
|
|
EXPORT_SYMBOL(pwm_config);
|
|
|
|
static int pwm_register(struct pwm_device *pwm)
|
|
{
|
|
pwm->duty_ns = -1;
|
|
pwm->period_ns = -1;
|
|
|
|
mutex_lock(&pwm_lock);
|
|
list_add_tail(&pwm->list, &pwm_list);
|
|
mutex_unlock(&pwm_lock);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int s3c_pwm_probe(struct platform_device *pdev)
|
|
{
|
|
struct device *dev = &pdev->dev;
|
|
struct pwm_device *pwm;
|
|
unsigned long flags;
|
|
unsigned long tcon;
|
|
unsigned int id = pdev->id;
|
|
int ret;
|
|
|
|
if (id == 4) {
|
|
dev_err(dev, "TIMER4 is currently not supported\n");
|
|
return -ENXIO;
|
|
}
|
|
|
|
pwm = kzalloc(sizeof(struct pwm_device), GFP_KERNEL);
|
|
if (pwm == NULL) {
|
|
dev_err(dev, "failed to allocate pwm_device\n");
|
|
return -ENOMEM;
|
|
}
|
|
|
|
pwm->pdev = pdev;
|
|
pwm->pwm_id = id;
|
|
|
|
/* calculate base of control bits in TCON */
|
|
pwm->tcon_base = id == 0 ? 0 : (id * 4) + 4;
|
|
|
|
pwm->clk = clk_get(dev, "pwm-tin");
|
|
if (IS_ERR(pwm->clk)) {
|
|
dev_err(dev, "failed to get pwm tin clk\n");
|
|
ret = PTR_ERR(pwm->clk);
|
|
goto err_alloc;
|
|
}
|
|
|
|
pwm->clk_div = clk_get(dev, "pwm-tdiv");
|
|
if (IS_ERR(pwm->clk_div)) {
|
|
dev_err(dev, "failed to get pwm tdiv clk\n");
|
|
ret = PTR_ERR(pwm->clk_div);
|
|
goto err_clk_tin;
|
|
}
|
|
|
|
clk_enable(pwm->clk);
|
|
clk_enable(pwm->clk_div);
|
|
|
|
local_irq_save(flags);
|
|
|
|
tcon = __raw_readl(S3C2410_TCON);
|
|
tcon |= pwm_tcon_invert(pwm);
|
|
__raw_writel(tcon, S3C2410_TCON);
|
|
|
|
local_irq_restore(flags);
|
|
|
|
|
|
ret = pwm_register(pwm);
|
|
if (ret) {
|
|
dev_err(dev, "failed to register pwm\n");
|
|
goto err_clk_tdiv;
|
|
}
|
|
|
|
pwm_dbg(pwm, "config bits %02x\n",
|
|
(__raw_readl(S3C2410_TCON) >> pwm->tcon_base) & 0x0f);
|
|
|
|
dev_info(dev, "tin at %lu, tdiv at %lu, tin=%sclk, base %d\n",
|
|
clk_get_rate(pwm->clk),
|
|
clk_get_rate(pwm->clk_div),
|
|
pwm_is_tdiv(pwm) ? "div" : "ext", pwm->tcon_base);
|
|
|
|
platform_set_drvdata(pdev, pwm);
|
|
return 0;
|
|
|
|
err_clk_tdiv:
|
|
clk_disable(pwm->clk_div);
|
|
clk_disable(pwm->clk);
|
|
clk_put(pwm->clk_div);
|
|
|
|
err_clk_tin:
|
|
clk_put(pwm->clk);
|
|
|
|
err_alloc:
|
|
kfree(pwm);
|
|
return ret;
|
|
}
|
|
|
|
static int __devexit s3c_pwm_remove(struct platform_device *pdev)
|
|
{
|
|
struct pwm_device *pwm = platform_get_drvdata(pdev);
|
|
|
|
clk_disable(pwm->clk_div);
|
|
clk_disable(pwm->clk);
|
|
clk_put(pwm->clk_div);
|
|
clk_put(pwm->clk);
|
|
kfree(pwm);
|
|
|
|
return 0;
|
|
}
|
|
|
|
#ifdef CONFIG_PM
|
|
static int s3c_pwm_suspend(struct platform_device *pdev, pm_message_t state)
|
|
{
|
|
struct pwm_device *pwm = platform_get_drvdata(pdev);
|
|
|
|
/* No one preserve these values during suspend so reset them
|
|
* Otherwise driver leaves PWM unconfigured if same values
|
|
* passed to pwm_config
|
|
*/
|
|
pwm->period_ns = 0;
|
|
pwm->duty_ns = 0;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int s3c_pwm_resume(struct platform_device *pdev)
|
|
{
|
|
struct pwm_device *pwm = platform_get_drvdata(pdev);
|
|
unsigned long tcon;
|
|
|
|
/* Restore invertion */
|
|
tcon = __raw_readl(S3C2410_TCON);
|
|
tcon |= pwm_tcon_invert(pwm);
|
|
__raw_writel(tcon, S3C2410_TCON);
|
|
|
|
return 0;
|
|
}
|
|
|
|
#else
|
|
#define s3c_pwm_suspend NULL
|
|
#define s3c_pwm_resume NULL
|
|
#endif
|
|
|
|
static struct platform_driver s3c_pwm_driver = {
|
|
.driver = {
|
|
.name = "s3c24xx-pwm",
|
|
.owner = THIS_MODULE,
|
|
},
|
|
.probe = s3c_pwm_probe,
|
|
.remove = __devexit_p(s3c_pwm_remove),
|
|
.suspend = s3c_pwm_suspend,
|
|
.resume = s3c_pwm_resume,
|
|
};
|
|
|
|
static int __init pwm_init(void)
|
|
{
|
|
int ret;
|
|
|
|
clk_scaler[0] = clk_get(NULL, "pwm-scaler0");
|
|
clk_scaler[1] = clk_get(NULL, "pwm-scaler1");
|
|
|
|
if (IS_ERR(clk_scaler[0]) || IS_ERR(clk_scaler[1])) {
|
|
printk(KERN_ERR "%s: failed to get scaler clocks\n", __func__);
|
|
return -EINVAL;
|
|
}
|
|
|
|
ret = platform_driver_register(&s3c_pwm_driver);
|
|
if (ret)
|
|
printk(KERN_ERR "%s: failed to add pwm driver\n", __func__);
|
|
|
|
return ret;
|
|
}
|
|
|
|
arch_initcall(pwm_init);
|