2
0
mirror of https://github.com/edk2-porting/linux-next.git synced 2024-12-20 19:23:57 +08:00
linux-next/drivers/s390/block/dasd_ioctl.c
Stefan Weinhuber 8e09f21574 [S390] dasd: add hyper PAV support to DASD device driver, part 1
Parallel access volumes (PAV) is a storage server feature, that allows
to start multiple channel programs on the same DASD in parallel. It
defines alias devices which can be used as alternative paths to the
same disk. With the old base PAV support we only needed rudimentary
functionality in the DASD device driver. As the mapping between base
and alias devices was static, we just had to export an identifier
(uid) and could leave the combining of devices to external layers
like a device mapper multipath.
Now hyper PAV removes the requirement to dedicate alias devices to
specific base devices. Instead each alias devices can be combined with
multiple base device on a per request basis. This requires full
support by the DASD device driver as now each channel program itself
has to identify the target base device.
The changes to the dasd device driver and the ECKD discipline are:
- Separate subchannel device representation (dasd_device) from block
  device representation (dasd_block). Only base devices are block
  devices.
- Gather information about base and alias devices and possible
  combinations.
- For each request decide which dasd_device should be used (base or
  alias) and build specific channel program.
- Support summary unit checks, which allow the storage server to
  upgrade / downgrade between base and hyper PAV at runtime (support
  is mandatory).

Signed-off-by: Stefan Weinhuber <wein@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2008-01-26 14:11:28 +01:00

436 lines
11 KiB
C

/*
* File...........: linux/drivers/s390/block/dasd_ioctl.c
* Author(s)......: Holger Smolinski <Holger.Smolinski@de.ibm.com>
* Horst Hummel <Horst.Hummel@de.ibm.com>
* Carsten Otte <Cotte@de.ibm.com>
* Martin Schwidefsky <schwidefsky@de.ibm.com>
* Bugreports.to..: <Linux390@de.ibm.com>
* (C) IBM Corporation, IBM Deutschland Entwicklung GmbH, 1999-2001
*
* i/o controls for the dasd driver.
*/
#include <linux/interrupt.h>
#include <linux/major.h>
#include <linux/fs.h>
#include <linux/blkpg.h>
#include <asm/ccwdev.h>
#include <asm/cmb.h>
#include <asm/uaccess.h>
/* This is ugly... */
#define PRINTK_HEADER "dasd_ioctl:"
#include "dasd_int.h"
static int
dasd_ioctl_api_version(void __user *argp)
{
int ver = DASD_API_VERSION;
return put_user(ver, (int __user *)argp);
}
/*
* Enable device.
* used by dasdfmt after BIODASDDISABLE to retrigger blocksize detection
*/
static int
dasd_ioctl_enable(struct block_device *bdev)
{
struct dasd_block *block = bdev->bd_disk->private_data;
if (!capable(CAP_SYS_ADMIN))
return -EACCES;
dasd_enable_device(block->base);
/* Formatting the dasd device can change the capacity. */
mutex_lock(&bdev->bd_mutex);
i_size_write(bdev->bd_inode, (loff_t)get_capacity(block->gdp) << 9);
mutex_unlock(&bdev->bd_mutex);
return 0;
}
/*
* Disable device.
* Used by dasdfmt. Disable I/O operations but allow ioctls.
*/
static int
dasd_ioctl_disable(struct block_device *bdev)
{
struct dasd_block *block = bdev->bd_disk->private_data;
if (!capable(CAP_SYS_ADMIN))
return -EACCES;
/*
* Man this is sick. We don't do a real disable but only downgrade
* the device to DASD_STATE_BASIC. The reason is that dasdfmt uses
* BIODASDDISABLE to disable accesses to the device via the block
* device layer but it still wants to do i/o on the device by
* using the BIODASDFMT ioctl. Therefore the correct state for the
* device is DASD_STATE_BASIC that allows to do basic i/o.
*/
dasd_set_target_state(block->base, DASD_STATE_BASIC);
/*
* Set i_size to zero, since read, write, etc. check against this
* value.
*/
mutex_lock(&bdev->bd_mutex);
i_size_write(bdev->bd_inode, 0);
mutex_unlock(&bdev->bd_mutex);
return 0;
}
/*
* Quiesce device.
*/
static int dasd_ioctl_quiesce(struct dasd_block *block)
{
unsigned long flags;
struct dasd_device *base;
base = block->base;
if (!capable (CAP_SYS_ADMIN))
return -EACCES;
DEV_MESSAGE(KERN_DEBUG, base, "%s", "Quiesce IO on device");
spin_lock_irqsave(get_ccwdev_lock(base->cdev), flags);
base->stopped |= DASD_STOPPED_QUIESCE;
spin_unlock_irqrestore(get_ccwdev_lock(base->cdev), flags);
return 0;
}
/*
* Quiesce device.
*/
static int dasd_ioctl_resume(struct dasd_block *block)
{
unsigned long flags;
struct dasd_device *base;
base = block->base;
if (!capable (CAP_SYS_ADMIN))
return -EACCES;
DEV_MESSAGE(KERN_DEBUG, base, "%s", "resume IO on device");
spin_lock_irqsave(get_ccwdev_lock(base->cdev), flags);
base->stopped &= ~DASD_STOPPED_QUIESCE;
spin_unlock_irqrestore(get_ccwdev_lock(base->cdev), flags);
dasd_schedule_block_bh(block);
return 0;
}
/*
* performs formatting of _device_ according to _fdata_
* Note: The discipline's format_function is assumed to deliver formatting
* commands to format a single unit of the device. In terms of the ECKD
* devices this means CCWs are generated to format a single track.
*/
static int dasd_format(struct dasd_block *block, struct format_data_t *fdata)
{
struct dasd_ccw_req *cqr;
struct dasd_device *base;
int rc;
base = block->base;
if (base->discipline->format_device == NULL)
return -EPERM;
if (base->state != DASD_STATE_BASIC) {
DEV_MESSAGE(KERN_WARNING, base, "%s",
"dasd_format: device is not disabled! ");
return -EBUSY;
}
DBF_DEV_EVENT(DBF_NOTICE, base,
"formatting units %d to %d (%d B blocks) flags %d",
fdata->start_unit,
fdata->stop_unit, fdata->blksize, fdata->intensity);
/* Since dasdfmt keeps the device open after it was disabled,
* there still exists an inode for this device.
* We must update i_blkbits, otherwise we might get errors when
* enabling the device later.
*/
if (fdata->start_unit == 0) {
struct block_device *bdev = bdget_disk(block->gdp, 0);
bdev->bd_inode->i_blkbits = blksize_bits(fdata->blksize);
bdput(bdev);
}
while (fdata->start_unit <= fdata->stop_unit) {
cqr = base->discipline->format_device(base, fdata);
if (IS_ERR(cqr))
return PTR_ERR(cqr);
rc = dasd_sleep_on_interruptible(cqr);
dasd_sfree_request(cqr, cqr->memdev);
if (rc) {
if (rc != -ERESTARTSYS)
DEV_MESSAGE(KERN_ERR, base,
" Formatting of unit %d failed "
"with rc = %d",
fdata->start_unit, rc);
return rc;
}
fdata->start_unit++;
}
return 0;
}
/*
* Format device.
*/
static int
dasd_ioctl_format(struct block_device *bdev, void __user *argp)
{
struct dasd_block *block = bdev->bd_disk->private_data;
struct format_data_t fdata;
if (!capable(CAP_SYS_ADMIN))
return -EACCES;
if (!argp)
return -EINVAL;
if (block->base->features & DASD_FEATURE_READONLY)
return -EROFS;
if (copy_from_user(&fdata, argp, sizeof(struct format_data_t)))
return -EFAULT;
if (bdev != bdev->bd_contains) {
DEV_MESSAGE(KERN_WARNING, block->base, "%s",
"Cannot low-level format a partition");
return -EINVAL;
}
return dasd_format(block, &fdata);
}
#ifdef CONFIG_DASD_PROFILE
/*
* Reset device profile information
*/
static int dasd_ioctl_reset_profile(struct dasd_block *block)
{
memset(&block->profile, 0, sizeof(struct dasd_profile_info_t));
return 0;
}
/*
* Return device profile information
*/
static int dasd_ioctl_read_profile(struct dasd_block *block, void __user *argp)
{
if (dasd_profile_level == DASD_PROFILE_OFF)
return -EIO;
if (copy_to_user(argp, &block->profile,
sizeof(struct dasd_profile_info_t)))
return -EFAULT;
return 0;
}
#else
static int dasd_ioctl_reset_profile(struct dasd_block *block)
{
return -ENOSYS;
}
static int dasd_ioctl_read_profile(struct dasd_block *block, void __user *argp)
{
return -ENOSYS;
}
#endif
/*
* Return dasd information. Used for BIODASDINFO and BIODASDINFO2.
*/
static int dasd_ioctl_information(struct dasd_block *block,
unsigned int cmd, void __user *argp)
{
struct dasd_information2_t *dasd_info;
unsigned long flags;
int rc;
struct dasd_device *base;
struct ccw_device *cdev;
struct ccw_dev_id dev_id;
base = block->base;
if (!base->discipline->fill_info)
return -EINVAL;
dasd_info = kzalloc(sizeof(struct dasd_information2_t), GFP_KERNEL);
if (dasd_info == NULL)
return -ENOMEM;
rc = base->discipline->fill_info(base, dasd_info);
if (rc) {
kfree(dasd_info);
return rc;
}
cdev = base->cdev;
ccw_device_get_id(cdev, &dev_id);
dasd_info->devno = dev_id.devno;
dasd_info->schid = _ccw_device_get_subchannel_number(base->cdev);
dasd_info->cu_type = cdev->id.cu_type;
dasd_info->cu_model = cdev->id.cu_model;
dasd_info->dev_type = cdev->id.dev_type;
dasd_info->dev_model = cdev->id.dev_model;
dasd_info->status = base->state;
/*
* The open_count is increased for every opener, that includes
* the blkdev_get in dasd_scan_partitions.
* This must be hidden from user-space.
*/
dasd_info->open_count = atomic_read(&block->open_count);
if (!block->bdev)
dasd_info->open_count++;
/*
* check if device is really formatted
* LDL / CDL was returned by 'fill_info'
*/
if ((base->state < DASD_STATE_READY) ||
(dasd_check_blocksize(block->bp_block)))
dasd_info->format = DASD_FORMAT_NONE;
dasd_info->features |=
((base->features & DASD_FEATURE_READONLY) != 0);
if (base->discipline)
memcpy(dasd_info->type, base->discipline->name, 4);
else
memcpy(dasd_info->type, "none", 4);
if (block->request_queue->request_fn) {
struct list_head *l;
#ifdef DASD_EXTENDED_PROFILING
{
struct list_head *l;
spin_lock_irqsave(&block->lock, flags);
list_for_each(l, &block->request_queue->queue_head)
dasd_info->req_queue_len++;
spin_unlock_irqrestore(&block->lock, flags);
}
#endif /* DASD_EXTENDED_PROFILING */
spin_lock_irqsave(get_ccwdev_lock(base->cdev), flags);
list_for_each(l, &base->ccw_queue)
dasd_info->chanq_len++;
spin_unlock_irqrestore(get_ccwdev_lock(base->cdev),
flags);
}
rc = 0;
if (copy_to_user(argp, dasd_info,
((cmd == (unsigned int) BIODASDINFO2) ?
sizeof(struct dasd_information2_t) :
sizeof(struct dasd_information_t))))
rc = -EFAULT;
kfree(dasd_info);
return rc;
}
/*
* Set read only
*/
static int
dasd_ioctl_set_ro(struct block_device *bdev, void __user *argp)
{
struct dasd_block *block = bdev->bd_disk->private_data;
int intval;
if (!capable(CAP_SYS_ADMIN))
return -EACCES;
if (bdev != bdev->bd_contains)
// ro setting is not allowed for partitions
return -EINVAL;
if (get_user(intval, (int __user *)argp))
return -EFAULT;
set_disk_ro(bdev->bd_disk, intval);
return dasd_set_feature(block->base->cdev, DASD_FEATURE_READONLY, intval);
}
static int dasd_ioctl_readall_cmb(struct dasd_block *block, unsigned int cmd,
unsigned long arg)
{
struct cmbdata __user *argp = (void __user *) arg;
size_t size = _IOC_SIZE(cmd);
struct cmbdata data;
int ret;
ret = cmf_readall(block->base->cdev, &data);
if (!ret && copy_to_user(argp, &data, min(size, sizeof(*argp))))
return -EFAULT;
return ret;
}
int
dasd_ioctl(struct inode *inode, struct file *file,
unsigned int cmd, unsigned long arg)
{
struct block_device *bdev = inode->i_bdev;
struct dasd_block *block = bdev->bd_disk->private_data;
void __user *argp = (void __user *)arg;
if (!block)
return -ENODEV;
if ((_IOC_DIR(cmd) != _IOC_NONE) && !arg) {
PRINT_DEBUG("empty data ptr");
return -EINVAL;
}
switch (cmd) {
case BIODASDDISABLE:
return dasd_ioctl_disable(bdev);
case BIODASDENABLE:
return dasd_ioctl_enable(bdev);
case BIODASDQUIESCE:
return dasd_ioctl_quiesce(block);
case BIODASDRESUME:
return dasd_ioctl_resume(block);
case BIODASDFMT:
return dasd_ioctl_format(bdev, argp);
case BIODASDINFO:
return dasd_ioctl_information(block, cmd, argp);
case BIODASDINFO2:
return dasd_ioctl_information(block, cmd, argp);
case BIODASDPRRD:
return dasd_ioctl_read_profile(block, argp);
case BIODASDPRRST:
return dasd_ioctl_reset_profile(block);
case BLKROSET:
return dasd_ioctl_set_ro(bdev, argp);
case DASDAPIVER:
return dasd_ioctl_api_version(argp);
case BIODASDCMFENABLE:
return enable_cmf(block->base->cdev);
case BIODASDCMFDISABLE:
return disable_cmf(block->base->cdev);
case BIODASDREADALLCMB:
return dasd_ioctl_readall_cmb(block, cmd, arg);
default:
/* if the discipline has an ioctl method try it. */
if (block->base->discipline->ioctl) {
int rval = block->base->discipline->ioctl(block, cmd, argp);
if (rval != -ENOIOCTLCMD)
return rval;
}
return -EINVAL;
}
}
long
dasd_compat_ioctl(struct file *filp, unsigned int cmd, unsigned long arg)
{
int rval;
lock_kernel();
rval = dasd_ioctl(filp->f_path.dentry->d_inode, filp, cmd, arg);
unlock_kernel();
return (rval == -EINVAL) ? -ENOIOCTLCMD : rval;
}