renegade-project/linux-next
2
0
Fork 0
mirror of https://github.com/edk2-porting/linux-next.git synced 2024-12-27 22:53:55 +08:00
Code
1b3c3714cb
linux-next/drivers/scsi/sun3x_esp.c
Maciej W. Rozycki 4df4db5c6c [TC] dec_esp: Driver model for the PMAZ-A 
This is a set of changes that converts the PMAZ-A support to the driver model.

The use of the driver model required switching to the hotplug SCSI
initialization model, which in turn required a change to the core NCR53C9x
driver.  I decided not to break all the frontend drivers and introduced an
additional parameter for esp_allocate() to select between the old and the new
model.  I hope this is OK, but I would be fine with converting NCR53C9x to the
new model unconditionally as long as I do not have to fix all the other
frontends (OK, perhaps I could do some of them ;-) ).

Signed-off-by: Maciej W. Rozycki <macro@linux-mips.org>
Cc: James Bottomley <James.Bottomley@steeleye.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2007-02-09 16:23:17 +00:00

393 lines
10 KiB
C
Raw Blame History

/* sun3x_esp.c: EnhancedScsiProcessor Sun3x SCSI driver code.
*
* (C) 1999 Thomas Bogendoerfer (tsbogend@alpha.franken.de)
*
* Based on David S. Miller's esp driver
*/
#include <linux/kernel.h>
#include <linux/types.h>
#include <linux/string.h>
#include <linux/slab.h>
#include <linux/blkdev.h>
#include <linux/proc_fs.h>
#include <linux/stat.h>
#include <linux/delay.h>
#include <linux/interrupt.h>
#include "scsi.h"
#include <scsi/scsi_host.h>
#include "NCR53C9x.h"
#include <asm/sun3x.h>
#include <asm/dvma.h>
#include <asm/irq.h>
static void dma_barrier(struct NCR_ESP *esp);
static int dma_bytes_sent(struct NCR_ESP *esp, int fifo_count);
static int dma_can_transfer(struct NCR_ESP *esp, Scsi_Cmnd *sp);
static void dma_drain(struct NCR_ESP *esp);
static void dma_invalidate(struct NCR_ESP *esp);
static void dma_dump_state(struct NCR_ESP *esp);
static void dma_init_read(struct NCR_ESP *esp, __u32 vaddress, int length);
static void dma_init_write(struct NCR_ESP *esp, __u32 vaddress, int length);
static void dma_ints_off(struct NCR_ESP *esp);
static void dma_ints_on(struct NCR_ESP *esp);
static int dma_irq_p(struct NCR_ESP *esp);
static void dma_poll(struct NCR_ESP *esp, unsigned char *vaddr);
static int dma_ports_p(struct NCR_ESP *esp);
static void dma_reset(struct NCR_ESP *esp);
static void dma_setup(struct NCR_ESP *esp, __u32 addr, int count, int write);
static void dma_mmu_get_scsi_one (struct NCR_ESP *esp, Scsi_Cmnd *sp);
static void dma_mmu_get_scsi_sgl (struct NCR_ESP *esp, Scsi_Cmnd *sp);
static void dma_mmu_release_scsi_one (struct NCR_ESP *esp, Scsi_Cmnd *sp);
static void dma_mmu_release_scsi_sgl (struct NCR_ESP *esp, Scsi_Cmnd *sp);
static void dma_advance_sg (Scsi_Cmnd *sp);
/* Detecting ESP chips on the machine. This is the simple and easy
* version.
*/
int sun3x_esp_detect(struct scsi_host_template *tpnt)
{
struct NCR_ESP *esp;
struct ConfigDev *esp_dev;
esp_dev = 0;
esp = esp_allocate(tpnt, esp_dev, 0);
/* Do command transfer with DMA */
esp->do_pio_cmds = 0;
/* Required functions */
esp->dma_bytes_sent = &dma_bytes_sent;
esp->dma_can_transfer = &dma_can_transfer;
esp->dma_dump_state = &dma_dump_state;
esp->dma_init_read = &dma_init_read;
esp->dma_init_write = &dma_init_write;
esp->dma_ints_off = &dma_ints_off;
esp->dma_ints_on = &dma_ints_on;
esp->dma_irq_p = &dma_irq_p;
esp->dma_ports_p = &dma_ports_p;
esp->dma_setup = &dma_setup;
/* Optional functions */
esp->dma_barrier = &dma_barrier;
esp->dma_invalidate = &dma_invalidate;
esp->dma_drain = &dma_drain;
esp->dma_irq_entry = 0;
esp->dma_irq_exit = 0;
esp->dma_led_on = 0;
esp->dma_led_off = 0;
esp->dma_poll = &dma_poll;
esp->dma_reset = &dma_reset;
/* virtual DMA functions */
esp->dma_mmu_get_scsi_one = &dma_mmu_get_scsi_one;
esp->dma_mmu_get_scsi_sgl = &dma_mmu_get_scsi_sgl;
esp->dma_mmu_release_scsi_one = &dma_mmu_release_scsi_one;
esp->dma_mmu_release_scsi_sgl = &dma_mmu_release_scsi_sgl;
esp->dma_advance_sg = &dma_advance_sg;
/* SCSI chip speed */
esp->cfreq = 20000000;
esp->eregs = (struct ESP_regs *)(SUN3X_ESP_BASE);
esp->dregs = (void *)SUN3X_ESP_DMA;
esp->esp_command = (volatile unsigned char *)dvma_malloc(DVMA_PAGE_SIZE);
esp->esp_command_dvma = dvma_vtob((unsigned long)esp->esp_command);
esp->irq = 2;
if (request_irq(esp->irq, esp_intr, IRQF_DISABLED,
"SUN3X SCSI", esp->ehost)) {
esp_deallocate(esp);
return 0;
}
esp->scsi_id = 7;
esp->diff = 0;
esp_initialize(esp);
/* for reasons beyond my knowledge (and which should likely be fixed)
sync mode doesn't work on a 3/80 at 5mhz. but it does at 4. */
esp->sync_defp = 0x3f;
printk("ESP: Total of %d ESP hosts found, %d actually in use.\n", nesps,
esps_in_use);
esps_running = esps_in_use;
return esps_in_use;
}
static void dma_do_drain(struct NCR_ESP *esp)
{
struct sparc_dma_registers *dregs =
(struct sparc_dma_registers *) esp->dregs;
int count = 500000;
while((dregs->cond_reg & DMA_PEND_READ) && (--count > 0))
udelay(1);
if(!count) {
printk("%s:%d timeout CSR %08lx\n", __FILE__, __LINE__, dregs->cond_reg);
}
dregs->cond_reg |= DMA_FIFO_STDRAIN;
count = 500000;
while((dregs->cond_reg & DMA_FIFO_ISDRAIN) && (--count > 0))
udelay(1);
if(!count) {
printk("%s:%d timeout CSR %08lx\n", __FILE__, __LINE__, dregs->cond_reg);
}
}
static void dma_barrier(struct NCR_ESP *esp)
{
struct sparc_dma_registers *dregs =
(struct sparc_dma_registers *) esp->dregs;
int count = 500000;
while((dregs->cond_reg & DMA_PEND_READ) && (--count > 0))
udelay(1);
if(!count) {
printk("%s:%d timeout CSR %08lx\n", __FILE__, __LINE__, dregs->cond_reg);
}
dregs->cond_reg &= ~(DMA_ENABLE);
}
/* This uses various DMA csr fields and the fifo flags count value to
* determine how many bytes were successfully sent/received by the ESP.
*/
static int dma_bytes_sent(struct NCR_ESP *esp, int fifo_count)
{
struct sparc_dma_registers *dregs =
(struct sparc_dma_registers *) esp->dregs;
int rval = dregs->st_addr - esp->esp_command_dvma;
return rval - fifo_count;
}
static int dma_can_transfer(struct NCR_ESP *esp, Scsi_Cmnd *sp)
{
return sp->SCp.this_residual;
}
static void dma_drain(struct NCR_ESP *esp)
{
struct sparc_dma_registers *dregs =
(struct sparc_dma_registers *) esp->dregs;
int count = 500000;
if(dregs->cond_reg & DMA_FIFO_ISDRAIN) {
dregs->cond_reg |= DMA_FIFO_STDRAIN;
while((dregs->cond_reg & DMA_FIFO_ISDRAIN) && (--count > 0))
udelay(1);
if(!count) {
printk("%s:%d timeout CSR %08lx\n", __FILE__, __LINE__, dregs->cond_reg);
}
}
}
static void dma_invalidate(struct NCR_ESP *esp)
{
struct sparc_dma_registers *dregs =
(struct sparc_dma_registers *) esp->dregs;
__u32 tmp;
int count = 500000;
while(((tmp = dregs->cond_reg) & DMA_PEND_READ) && (--count > 0))
udelay(1);
if(!count) {
printk("%s:%d timeout CSR %08lx\n", __FILE__, __LINE__, dregs->cond_reg);
}
dregs->cond_reg = tmp | DMA_FIFO_INV;
dregs->cond_reg &= ~DMA_FIFO_INV;
}
static void dma_dump_state(struct NCR_ESP *esp)
{
struct sparc_dma_registers *dregs =
(struct sparc_dma_registers *) esp->dregs;
ESPLOG(("esp%d: dma -- cond_reg<%08lx> addr<%08lx>\n",
esp->esp_id, dregs->cond_reg, dregs->st_addr));
}
static void dma_init_read(struct NCR_ESP *esp, __u32 vaddress, int length)
{
struct sparc_dma_registers *dregs =
(struct sparc_dma_registers *) esp->dregs;
dregs->st_addr = vaddress;
dregs->cond_reg |= (DMA_ST_WRITE | DMA_ENABLE);
}
static void dma_init_write(struct NCR_ESP *esp, __u32 vaddress, int length)
{
struct sparc_dma_registers *dregs =
(struct sparc_dma_registers *) esp->dregs;
/* Set up the DMA counters */
dregs->st_addr = vaddress;
dregs->cond_reg = ((dregs->cond_reg & ~(DMA_ST_WRITE)) | DMA_ENABLE);
}
static void dma_ints_off(struct NCR_ESP *esp)
{
DMA_INTSOFF((struct sparc_dma_registers *) esp->dregs);
}
static void dma_ints_on(struct NCR_ESP *esp)
{
DMA_INTSON((struct sparc_dma_registers *) esp->dregs);
}
static int dma_irq_p(struct NCR_ESP *esp)
{
return DMA_IRQ_P((struct sparc_dma_registers *) esp->dregs);
}
static void dma_poll(struct NCR_ESP *esp, unsigned char *vaddr)
{
int count = 50;
dma_do_drain(esp);
/* Wait till the first bits settle. */
while((*(volatile unsigned char *)vaddr == 0xff) && (--count > 0))
udelay(1);
if(!count) {
// printk("%s:%d timeout expire (data %02x)\n", __FILE__, __LINE__,
// esp_read(esp->eregs->esp_fdata));
//mach_halt();
vaddr[0] = esp_read(esp->eregs->esp_fdata);
vaddr[1] = esp_read(esp->eregs->esp_fdata);
}
}
static int dma_ports_p(struct NCR_ESP *esp)
{
return (((struct sparc_dma_registers *) esp->dregs)->cond_reg
& DMA_INT_ENAB);
}
/* Resetting various pieces of the ESP scsi driver chipset/buses. */
static void dma_reset(struct NCR_ESP *esp)
{
struct sparc_dma_registers *dregs =
(struct sparc_dma_registers *)esp->dregs;
/* Punt the DVMA into a known state. */
dregs->cond_reg |= DMA_RST_SCSI;
dregs->cond_reg &= ~(DMA_RST_SCSI);
DMA_INTSON(dregs);
}
static void dma_setup(struct NCR_ESP *esp, __u32 addr, int count, int write)
{
struct sparc_dma_registers *dregs =
(struct sparc_dma_registers *) esp->dregs;
unsigned long nreg = dregs->cond_reg;
// printk("dma_setup %c addr %08x cnt %08x\n",
// write ? 'W' : 'R', addr, count);
dma_do_drain(esp);
if(write)
nreg |= DMA_ST_WRITE;
else {
nreg &= ~(DMA_ST_WRITE);
}
nreg |= DMA_ENABLE;
dregs->cond_reg = nreg;
dregs->st_addr = addr;
}
static void dma_mmu_get_scsi_one (struct NCR_ESP *esp, Scsi_Cmnd *sp)
{
sp->SCp.have_data_in = dvma_map((unsigned long)sp->SCp.buffer,
sp->SCp.this_residual);
sp->SCp.ptr = (char *)((unsigned long)sp->SCp.have_data_in);
}
static void dma_mmu_get_scsi_sgl (struct NCR_ESP *esp, Scsi_Cmnd *sp)
{
int sz = sp->SCp.buffers_residual;
struct scatterlist *sg = sp->SCp.buffer;
while (sz >= 0) {
sg[sz].dma_address = dvma_map((unsigned long)page_address(sg[sz].page) +
sg[sz].offset, sg[sz].length);
sz--;
}
sp->SCp.ptr=(char *)((unsigned long)sp->SCp.buffer->dma_address);
}
static void dma_mmu_release_scsi_one (struct NCR_ESP *esp, Scsi_Cmnd *sp)
{
dvma_unmap((char *)sp->SCp.have_data_in);
}
static void dma_mmu_release_scsi_sgl (struct NCR_ESP *esp, Scsi_Cmnd *sp)
{
int sz = sp->use_sg - 1;
struct scatterlist *sg = (struct scatterlist *)sp->request_buffer;
while(sz >= 0) {
dvma_unmap((char *)sg[sz].dma_address);
sz--;
}
}
static void dma_advance_sg (Scsi_Cmnd *sp)
{
sp->SCp.ptr = (char *)((unsigned long)sp->SCp.buffer->dma_address);
}
static int sun3x_esp_release(struct Scsi_Host *instance)
{
/* this code does not support being compiled as a module */
return 1;
}
static struct scsi_host_template driver_template = {
.proc_name = "sun3x_esp",
.proc_info = &esp_proc_info,
.name = "Sun ESP 100/100a/200",
.detect = sun3x_esp_detect,
.release = sun3x_esp_release,
.slave_alloc = esp_slave_alloc,
.slave_destroy = esp_slave_destroy,
.info = esp_info,
.queuecommand = esp_queue,
.eh_abort_handler = esp_abort,
.eh_bus_reset_handler = esp_reset,
.can_queue = 7,
.this_id = 7,
.sg_tablesize = SG_ALL,
.cmd_per_lun = 1,
.use_clustering = DISABLE_CLUSTERING,
};
#include "scsi_module.c"
MODULE_LICENSE("GPL");
View Git Blame Copy Permalink