mirror of
https://github.com/edk2-porting/linux-next.git
synced 2024-12-15 16:53:54 +08:00
8c05410350
The BF537 SIC combines the gpio port H mask A interrupts with the emac rx interrupt, so we need to demux this in software. It also combines the gpio port H mask B and the emac tx interrupts, and the watchdog and port F mask B interrupts, but since we don't support mask B yet, just add the defines for now. Signed-off-by: Mike Frysinger <vapier@gentoo.org>
1282 lines
29 KiB
C
1282 lines
29 KiB
C
/*
|
|
* Set up the interrupt priorities
|
|
*
|
|
* Copyright 2004-2009 Analog Devices Inc.
|
|
* 2003 Bas Vermeulen <bas@buyways.nl>
|
|
* 2002 Arcturus Networks Inc. MaTed <mated@sympatico.ca>
|
|
* 2000-2001 Lineo, Inc. D. Jefff Dionne <jeff@lineo.ca>
|
|
* 1999 D. Jeff Dionne <jeff@uclinux.org>
|
|
* 1996 Roman Zippel
|
|
*
|
|
* Licensed under the GPL-2
|
|
*/
|
|
|
|
#include <linux/module.h>
|
|
#include <linux/kernel_stat.h>
|
|
#include <linux/seq_file.h>
|
|
#include <linux/irq.h>
|
|
#include <linux/sched.h>
|
|
#ifdef CONFIG_IPIPE
|
|
#include <linux/ipipe.h>
|
|
#endif
|
|
#include <asm/traps.h>
|
|
#include <asm/blackfin.h>
|
|
#include <asm/gpio.h>
|
|
#include <asm/irq_handler.h>
|
|
#include <asm/dpmc.h>
|
|
|
|
#define SIC_SYSIRQ(irq) (irq - (IRQ_CORETMR + 1))
|
|
|
|
/*
|
|
* NOTES:
|
|
* - we have separated the physical Hardware interrupt from the
|
|
* levels that the LINUX kernel sees (see the description in irq.h)
|
|
* -
|
|
*/
|
|
|
|
#ifndef CONFIG_SMP
|
|
/* Initialize this to an actual value to force it into the .data
|
|
* section so that we know it is properly initialized at entry into
|
|
* the kernel but before bss is initialized to zero (which is where
|
|
* it would live otherwise). The 0x1f magic represents the IRQs we
|
|
* cannot actually mask out in hardware.
|
|
*/
|
|
unsigned long bfin_irq_flags = 0x1f;
|
|
EXPORT_SYMBOL(bfin_irq_flags);
|
|
#endif
|
|
|
|
#ifdef CONFIG_PM
|
|
unsigned long bfin_sic_iwr[3]; /* Up to 3 SIC_IWRx registers */
|
|
unsigned vr_wakeup;
|
|
#endif
|
|
|
|
static struct ivgx {
|
|
/* irq number for request_irq, available in mach-bf5xx/irq.h */
|
|
unsigned int irqno;
|
|
/* corresponding bit in the SIC_ISR register */
|
|
unsigned int isrflag;
|
|
} ivg_table[NR_PERI_INTS];
|
|
|
|
static struct ivg_slice {
|
|
/* position of first irq in ivg_table for given ivg */
|
|
struct ivgx *ifirst;
|
|
struct ivgx *istop;
|
|
} ivg7_13[IVG13 - IVG7 + 1];
|
|
|
|
|
|
/*
|
|
* Search SIC_IAR and fill tables with the irqvalues
|
|
* and their positions in the SIC_ISR register.
|
|
*/
|
|
static void __init search_IAR(void)
|
|
{
|
|
unsigned ivg, irq_pos = 0;
|
|
for (ivg = 0; ivg <= IVG13 - IVG7; ivg++) {
|
|
int irqN;
|
|
|
|
ivg7_13[ivg].istop = ivg7_13[ivg].ifirst = &ivg_table[irq_pos];
|
|
|
|
for (irqN = 0; irqN < NR_PERI_INTS; irqN += 4) {
|
|
int irqn;
|
|
u32 iar = bfin_read32((unsigned long *)SIC_IAR0 +
|
|
#if defined(CONFIG_BF51x) || defined(CONFIG_BF52x) || \
|
|
defined(CONFIG_BF538) || defined(CONFIG_BF539)
|
|
((irqN % 32) >> 3) + ((irqN / 32) * ((SIC_IAR4 - SIC_IAR0) / 4))
|
|
#else
|
|
(irqN >> 3)
|
|
#endif
|
|
);
|
|
|
|
for (irqn = irqN; irqn < irqN + 4; ++irqn) {
|
|
int iar_shift = (irqn & 7) * 4;
|
|
if (ivg == (0xf & (iar >> iar_shift))) {
|
|
ivg_table[irq_pos].irqno = IVG7 + irqn;
|
|
ivg_table[irq_pos].isrflag = 1 << (irqn % 32);
|
|
ivg7_13[ivg].istop++;
|
|
irq_pos++;
|
|
}
|
|
}
|
|
}
|
|
}
|
|
}
|
|
|
|
/*
|
|
* This is for core internal IRQs
|
|
*/
|
|
|
|
void bfin_ack_noop(struct irq_data *d)
|
|
{
|
|
/* Dummy function. */
|
|
}
|
|
|
|
static void bfin_core_mask_irq(struct irq_data *d)
|
|
{
|
|
bfin_irq_flags &= ~(1 << d->irq);
|
|
if (!hard_irqs_disabled())
|
|
hard_local_irq_enable();
|
|
}
|
|
|
|
static void bfin_core_unmask_irq(struct irq_data *d)
|
|
{
|
|
bfin_irq_flags |= 1 << d->irq;
|
|
/*
|
|
* If interrupts are enabled, IMASK must contain the same value
|
|
* as bfin_irq_flags. Make sure that invariant holds. If interrupts
|
|
* are currently disabled we need not do anything; one of the
|
|
* callers will take care of setting IMASK to the proper value
|
|
* when reenabling interrupts.
|
|
* local_irq_enable just does "STI bfin_irq_flags", so it's exactly
|
|
* what we need.
|
|
*/
|
|
if (!hard_irqs_disabled())
|
|
hard_local_irq_enable();
|
|
return;
|
|
}
|
|
|
|
void bfin_internal_mask_irq(unsigned int irq)
|
|
{
|
|
unsigned long flags = hard_local_irq_save();
|
|
|
|
#ifdef SIC_IMASK0
|
|
unsigned mask_bank = SIC_SYSIRQ(irq) / 32;
|
|
unsigned mask_bit = SIC_SYSIRQ(irq) % 32;
|
|
bfin_write_SIC_IMASK(mask_bank, bfin_read_SIC_IMASK(mask_bank) &
|
|
~(1 << mask_bit));
|
|
# ifdef CONFIG_SMP
|
|
bfin_write_SICB_IMASK(mask_bank, bfin_read_SICB_IMASK(mask_bank) &
|
|
~(1 << mask_bit));
|
|
# endif
|
|
#else
|
|
bfin_write_SIC_IMASK(bfin_read_SIC_IMASK() &
|
|
~(1 << SIC_SYSIRQ(irq)));
|
|
#endif
|
|
|
|
hard_local_irq_restore(flags);
|
|
}
|
|
|
|
static void bfin_internal_mask_irq_chip(struct irq_data *d)
|
|
{
|
|
bfin_internal_mask_irq(d->irq);
|
|
}
|
|
|
|
#ifdef CONFIG_SMP
|
|
static void bfin_internal_unmask_irq_affinity(unsigned int irq,
|
|
const struct cpumask *affinity)
|
|
#else
|
|
void bfin_internal_unmask_irq(unsigned int irq)
|
|
#endif
|
|
{
|
|
unsigned long flags = hard_local_irq_save();
|
|
|
|
#ifdef SIC_IMASK0
|
|
unsigned mask_bank = SIC_SYSIRQ(irq) / 32;
|
|
unsigned mask_bit = SIC_SYSIRQ(irq) % 32;
|
|
# ifdef CONFIG_SMP
|
|
if (cpumask_test_cpu(0, affinity))
|
|
# endif
|
|
bfin_write_SIC_IMASK(mask_bank,
|
|
bfin_read_SIC_IMASK(mask_bank) |
|
|
(1 << mask_bit));
|
|
# ifdef CONFIG_SMP
|
|
if (cpumask_test_cpu(1, affinity))
|
|
bfin_write_SICB_IMASK(mask_bank,
|
|
bfin_read_SICB_IMASK(mask_bank) |
|
|
(1 << mask_bit));
|
|
# endif
|
|
#else
|
|
bfin_write_SIC_IMASK(bfin_read_SIC_IMASK() |
|
|
(1 << SIC_SYSIRQ(irq)));
|
|
#endif
|
|
|
|
hard_local_irq_restore(flags);
|
|
}
|
|
|
|
#ifdef CONFIG_SMP
|
|
static void bfin_internal_unmask_irq_chip(struct irq_data *d)
|
|
{
|
|
bfin_internal_unmask_irq_affinity(d->irq, d->affinity);
|
|
}
|
|
|
|
static int bfin_internal_set_affinity(struct irq_data *d,
|
|
const struct cpumask *mask, bool force)
|
|
{
|
|
bfin_internal_mask_irq(d->irq);
|
|
bfin_internal_unmask_irq_affinity(d->irq, mask);
|
|
|
|
return 0;
|
|
}
|
|
#else
|
|
static void bfin_internal_unmask_irq_chip(struct irq_data *d)
|
|
{
|
|
bfin_internal_unmask_irq(d->irq);
|
|
}
|
|
#endif
|
|
|
|
#ifdef CONFIG_PM
|
|
int bfin_internal_set_wake(unsigned int irq, unsigned int state)
|
|
{
|
|
u32 bank, bit, wakeup = 0;
|
|
unsigned long flags;
|
|
bank = SIC_SYSIRQ(irq) / 32;
|
|
bit = SIC_SYSIRQ(irq) % 32;
|
|
|
|
switch (irq) {
|
|
#ifdef IRQ_RTC
|
|
case IRQ_RTC:
|
|
wakeup |= WAKE;
|
|
break;
|
|
#endif
|
|
#ifdef IRQ_CAN0_RX
|
|
case IRQ_CAN0_RX:
|
|
wakeup |= CANWE;
|
|
break;
|
|
#endif
|
|
#ifdef IRQ_CAN1_RX
|
|
case IRQ_CAN1_RX:
|
|
wakeup |= CANWE;
|
|
break;
|
|
#endif
|
|
#ifdef IRQ_USB_INT0
|
|
case IRQ_USB_INT0:
|
|
wakeup |= USBWE;
|
|
break;
|
|
#endif
|
|
#ifdef CONFIG_BF54x
|
|
case IRQ_CNT:
|
|
wakeup |= ROTWE;
|
|
break;
|
|
#endif
|
|
default:
|
|
break;
|
|
}
|
|
|
|
flags = hard_local_irq_save();
|
|
|
|
if (state) {
|
|
bfin_sic_iwr[bank] |= (1 << bit);
|
|
vr_wakeup |= wakeup;
|
|
|
|
} else {
|
|
bfin_sic_iwr[bank] &= ~(1 << bit);
|
|
vr_wakeup &= ~wakeup;
|
|
}
|
|
|
|
hard_local_irq_restore(flags);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int bfin_internal_set_wake_chip(struct irq_data *d, unsigned int state)
|
|
{
|
|
return bfin_internal_set_wake(d->irq, state);
|
|
}
|
|
#else
|
|
# define bfin_internal_set_wake_chip NULL
|
|
#endif
|
|
|
|
static struct irq_chip bfin_core_irqchip = {
|
|
.name = "CORE",
|
|
.irq_ack = bfin_ack_noop,
|
|
.irq_mask = bfin_core_mask_irq,
|
|
.irq_unmask = bfin_core_unmask_irq,
|
|
};
|
|
|
|
static struct irq_chip bfin_internal_irqchip = {
|
|
.name = "INTN",
|
|
.irq_ack = bfin_ack_noop,
|
|
.irq_mask = bfin_internal_mask_irq_chip,
|
|
.irq_unmask = bfin_internal_unmask_irq_chip,
|
|
.irq_mask_ack = bfin_internal_mask_irq_chip,
|
|
.irq_disable = bfin_internal_mask_irq_chip,
|
|
.irq_enable = bfin_internal_unmask_irq_chip,
|
|
#ifdef CONFIG_SMP
|
|
.irq_set_affinity = bfin_internal_set_affinity,
|
|
#endif
|
|
.irq_set_wake = bfin_internal_set_wake_chip,
|
|
};
|
|
|
|
void bfin_handle_irq(unsigned irq)
|
|
{
|
|
#ifdef CONFIG_IPIPE
|
|
struct pt_regs regs; /* Contents not used. */
|
|
ipipe_trace_irq_entry(irq);
|
|
__ipipe_handle_irq(irq, ®s);
|
|
ipipe_trace_irq_exit(irq);
|
|
#else /* !CONFIG_IPIPE */
|
|
generic_handle_irq(irq);
|
|
#endif /* !CONFIG_IPIPE */
|
|
}
|
|
|
|
#if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE)
|
|
static int mac_stat_int_mask;
|
|
|
|
static void bfin_mac_status_ack_irq(unsigned int irq)
|
|
{
|
|
switch (irq) {
|
|
case IRQ_MAC_MMCINT:
|
|
bfin_write_EMAC_MMC_TIRQS(
|
|
bfin_read_EMAC_MMC_TIRQE() &
|
|
bfin_read_EMAC_MMC_TIRQS());
|
|
bfin_write_EMAC_MMC_RIRQS(
|
|
bfin_read_EMAC_MMC_RIRQE() &
|
|
bfin_read_EMAC_MMC_RIRQS());
|
|
break;
|
|
case IRQ_MAC_RXFSINT:
|
|
bfin_write_EMAC_RX_STKY(
|
|
bfin_read_EMAC_RX_IRQE() &
|
|
bfin_read_EMAC_RX_STKY());
|
|
break;
|
|
case IRQ_MAC_TXFSINT:
|
|
bfin_write_EMAC_TX_STKY(
|
|
bfin_read_EMAC_TX_IRQE() &
|
|
bfin_read_EMAC_TX_STKY());
|
|
break;
|
|
case IRQ_MAC_WAKEDET:
|
|
bfin_write_EMAC_WKUP_CTL(
|
|
bfin_read_EMAC_WKUP_CTL() | MPKS | RWKS);
|
|
break;
|
|
default:
|
|
/* These bits are W1C */
|
|
bfin_write_EMAC_SYSTAT(1L << (irq - IRQ_MAC_PHYINT));
|
|
break;
|
|
}
|
|
}
|
|
|
|
static void bfin_mac_status_mask_irq(struct irq_data *d)
|
|
{
|
|
unsigned int irq = d->irq;
|
|
|
|
mac_stat_int_mask &= ~(1L << (irq - IRQ_MAC_PHYINT));
|
|
#ifdef BF537_FAMILY
|
|
switch (irq) {
|
|
case IRQ_MAC_PHYINT:
|
|
bfin_write_EMAC_SYSCTL(bfin_read_EMAC_SYSCTL() & ~PHYIE);
|
|
break;
|
|
default:
|
|
break;
|
|
}
|
|
#else
|
|
if (!mac_stat_int_mask)
|
|
bfin_internal_mask_irq(IRQ_MAC_ERROR);
|
|
#endif
|
|
bfin_mac_status_ack_irq(irq);
|
|
}
|
|
|
|
static void bfin_mac_status_unmask_irq(struct irq_data *d)
|
|
{
|
|
unsigned int irq = d->irq;
|
|
|
|
#ifdef BF537_FAMILY
|
|
switch (irq) {
|
|
case IRQ_MAC_PHYINT:
|
|
bfin_write_EMAC_SYSCTL(bfin_read_EMAC_SYSCTL() | PHYIE);
|
|
break;
|
|
default:
|
|
break;
|
|
}
|
|
#else
|
|
if (!mac_stat_int_mask)
|
|
bfin_internal_unmask_irq(IRQ_MAC_ERROR);
|
|
#endif
|
|
mac_stat_int_mask |= 1L << (irq - IRQ_MAC_PHYINT);
|
|
}
|
|
|
|
#ifdef CONFIG_PM
|
|
int bfin_mac_status_set_wake(struct irq_data *d, unsigned int state)
|
|
{
|
|
#ifdef BF537_FAMILY
|
|
return bfin_internal_set_wake(IRQ_GENERIC_ERROR, state);
|
|
#else
|
|
return bfin_internal_set_wake(IRQ_MAC_ERROR, state);
|
|
#endif
|
|
}
|
|
#else
|
|
# define bfin_mac_status_set_wake NULL
|
|
#endif
|
|
|
|
static struct irq_chip bfin_mac_status_irqchip = {
|
|
.name = "MACST",
|
|
.irq_ack = bfin_ack_noop,
|
|
.irq_mask_ack = bfin_mac_status_mask_irq,
|
|
.irq_mask = bfin_mac_status_mask_irq,
|
|
.irq_unmask = bfin_mac_status_unmask_irq,
|
|
.irq_set_wake = bfin_mac_status_set_wake,
|
|
};
|
|
|
|
void bfin_demux_mac_status_irq(unsigned int int_err_irq,
|
|
struct irq_desc *inta_desc)
|
|
{
|
|
int i, irq = 0;
|
|
u32 status = bfin_read_EMAC_SYSTAT();
|
|
|
|
for (i = 0; i <= (IRQ_MAC_STMDONE - IRQ_MAC_PHYINT); i++)
|
|
if (status & (1L << i)) {
|
|
irq = IRQ_MAC_PHYINT + i;
|
|
break;
|
|
}
|
|
|
|
if (irq) {
|
|
if (mac_stat_int_mask & (1L << (irq - IRQ_MAC_PHYINT))) {
|
|
bfin_handle_irq(irq);
|
|
} else {
|
|
bfin_mac_status_ack_irq(irq);
|
|
pr_debug("IRQ %d:"
|
|
" MASKED MAC ERROR INTERRUPT ASSERTED\n",
|
|
irq);
|
|
}
|
|
} else
|
|
printk(KERN_ERR
|
|
"%s : %s : LINE %d :\nIRQ ?: MAC ERROR"
|
|
" INTERRUPT ASSERTED BUT NO SOURCE FOUND"
|
|
"(EMAC_SYSTAT=0x%X)\n",
|
|
__func__, __FILE__, __LINE__, status);
|
|
}
|
|
#endif
|
|
|
|
static inline void bfin_set_irq_handler(unsigned irq, irq_flow_handler_t handle)
|
|
{
|
|
#ifdef CONFIG_IPIPE
|
|
handle = handle_level_irq;
|
|
#endif
|
|
__irq_set_handler_locked(irq, handle);
|
|
}
|
|
|
|
static DECLARE_BITMAP(gpio_enabled, MAX_BLACKFIN_GPIOS);
|
|
extern void bfin_gpio_irq_prepare(unsigned gpio);
|
|
|
|
#if !defined(CONFIG_BF54x)
|
|
|
|
static void bfin_gpio_ack_irq(struct irq_data *d)
|
|
{
|
|
/* AFAIK ack_irq in case mask_ack is provided
|
|
* get's only called for edge sense irqs
|
|
*/
|
|
set_gpio_data(irq_to_gpio(d->irq), 0);
|
|
}
|
|
|
|
static void bfin_gpio_mask_ack_irq(struct irq_data *d)
|
|
{
|
|
unsigned int irq = d->irq;
|
|
u32 gpionr = irq_to_gpio(irq);
|
|
|
|
if (!irqd_is_level_type(d))
|
|
set_gpio_data(gpionr, 0);
|
|
|
|
set_gpio_maska(gpionr, 0);
|
|
}
|
|
|
|
static void bfin_gpio_mask_irq(struct irq_data *d)
|
|
{
|
|
set_gpio_maska(irq_to_gpio(d->irq), 0);
|
|
}
|
|
|
|
static void bfin_gpio_unmask_irq(struct irq_data *d)
|
|
{
|
|
set_gpio_maska(irq_to_gpio(d->irq), 1);
|
|
}
|
|
|
|
static unsigned int bfin_gpio_irq_startup(struct irq_data *d)
|
|
{
|
|
u32 gpionr = irq_to_gpio(d->irq);
|
|
|
|
if (__test_and_set_bit(gpionr, gpio_enabled))
|
|
bfin_gpio_irq_prepare(gpionr);
|
|
|
|
bfin_gpio_unmask_irq(d);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void bfin_gpio_irq_shutdown(struct irq_data *d)
|
|
{
|
|
u32 gpionr = irq_to_gpio(d->irq);
|
|
|
|
bfin_gpio_mask_irq(d);
|
|
__clear_bit(gpionr, gpio_enabled);
|
|
bfin_gpio_irq_free(gpionr);
|
|
}
|
|
|
|
static int bfin_gpio_irq_type(struct irq_data *d, unsigned int type)
|
|
{
|
|
unsigned int irq = d->irq;
|
|
int ret;
|
|
char buf[16];
|
|
u32 gpionr = irq_to_gpio(irq);
|
|
|
|
if (type == IRQ_TYPE_PROBE) {
|
|
/* only probe unenabled GPIO interrupt lines */
|
|
if (test_bit(gpionr, gpio_enabled))
|
|
return 0;
|
|
type = IRQ_TYPE_EDGE_RISING | IRQ_TYPE_EDGE_FALLING;
|
|
}
|
|
|
|
if (type & (IRQ_TYPE_EDGE_RISING | IRQ_TYPE_EDGE_FALLING |
|
|
IRQ_TYPE_LEVEL_HIGH | IRQ_TYPE_LEVEL_LOW)) {
|
|
|
|
snprintf(buf, 16, "gpio-irq%d", irq);
|
|
ret = bfin_gpio_irq_request(gpionr, buf);
|
|
if (ret)
|
|
return ret;
|
|
|
|
if (__test_and_set_bit(gpionr, gpio_enabled))
|
|
bfin_gpio_irq_prepare(gpionr);
|
|
|
|
} else {
|
|
__clear_bit(gpionr, gpio_enabled);
|
|
return 0;
|
|
}
|
|
|
|
set_gpio_inen(gpionr, 0);
|
|
set_gpio_dir(gpionr, 0);
|
|
|
|
if ((type & (IRQ_TYPE_EDGE_RISING | IRQ_TYPE_EDGE_FALLING))
|
|
== (IRQ_TYPE_EDGE_RISING | IRQ_TYPE_EDGE_FALLING))
|
|
set_gpio_both(gpionr, 1);
|
|
else
|
|
set_gpio_both(gpionr, 0);
|
|
|
|
if ((type & (IRQ_TYPE_EDGE_FALLING | IRQ_TYPE_LEVEL_LOW)))
|
|
set_gpio_polar(gpionr, 1); /* low or falling edge denoted by one */
|
|
else
|
|
set_gpio_polar(gpionr, 0); /* high or rising edge denoted by zero */
|
|
|
|
if (type & (IRQ_TYPE_EDGE_RISING | IRQ_TYPE_EDGE_FALLING)) {
|
|
set_gpio_edge(gpionr, 1);
|
|
set_gpio_inen(gpionr, 1);
|
|
set_gpio_data(gpionr, 0);
|
|
|
|
} else {
|
|
set_gpio_edge(gpionr, 0);
|
|
set_gpio_inen(gpionr, 1);
|
|
}
|
|
|
|
if (type & (IRQ_TYPE_EDGE_RISING | IRQ_TYPE_EDGE_FALLING))
|
|
bfin_set_irq_handler(irq, handle_edge_irq);
|
|
else
|
|
bfin_set_irq_handler(irq, handle_level_irq);
|
|
|
|
return 0;
|
|
}
|
|
|
|
#ifdef CONFIG_PM
|
|
static int bfin_gpio_set_wake(struct irq_data *d, unsigned int state)
|
|
{
|
|
return gpio_pm_wakeup_ctrl(irq_to_gpio(d->irq), state);
|
|
}
|
|
#else
|
|
# define bfin_gpio_set_wake NULL
|
|
#endif
|
|
|
|
static void bfin_demux_gpio_block(unsigned int irq)
|
|
{
|
|
unsigned int gpio, mask;
|
|
|
|
gpio = irq_to_gpio(irq);
|
|
mask = get_gpiop_data(gpio) & get_gpiop_maska(gpio);
|
|
|
|
while (mask) {
|
|
if (mask & 1)
|
|
bfin_handle_irq(irq);
|
|
irq++;
|
|
mask >>= 1;
|
|
}
|
|
}
|
|
|
|
void bfin_demux_gpio_irq(unsigned int inta_irq,
|
|
struct irq_desc *desc)
|
|
{
|
|
unsigned int irq;
|
|
|
|
switch (inta_irq) {
|
|
#if defined(BF537_FAMILY)
|
|
case IRQ_PF_INTA_PG_INTA:
|
|
bfin_demux_gpio_block(IRQ_PF0);
|
|
irq = IRQ_PG0;
|
|
break;
|
|
case IRQ_PH_INTA_MAC_RX:
|
|
irq = IRQ_PH0;
|
|
break;
|
|
#elif defined(BF533_FAMILY)
|
|
case IRQ_PROG_INTA:
|
|
irq = IRQ_PF0;
|
|
break;
|
|
#elif defined(BF538_FAMILY)
|
|
case IRQ_PORTF_INTA:
|
|
irq = IRQ_PF0;
|
|
break;
|
|
#elif defined(CONFIG_BF52x) || defined(CONFIG_BF51x)
|
|
case IRQ_PORTF_INTA:
|
|
irq = IRQ_PF0;
|
|
break;
|
|
case IRQ_PORTG_INTA:
|
|
irq = IRQ_PG0;
|
|
break;
|
|
case IRQ_PORTH_INTA:
|
|
irq = IRQ_PH0;
|
|
break;
|
|
#elif defined(CONFIG_BF561)
|
|
case IRQ_PROG0_INTA:
|
|
irq = IRQ_PF0;
|
|
break;
|
|
case IRQ_PROG1_INTA:
|
|
irq = IRQ_PF16;
|
|
break;
|
|
case IRQ_PROG2_INTA:
|
|
irq = IRQ_PF32;
|
|
break;
|
|
#endif
|
|
default:
|
|
BUG();
|
|
return;
|
|
}
|
|
|
|
bfin_demux_gpio_block(irq);
|
|
}
|
|
|
|
#else /* CONFIG_BF54x */
|
|
|
|
#define NR_PINT_SYS_IRQS 4
|
|
#define NR_PINT_BITS 32
|
|
#define NR_PINTS 160
|
|
#define IRQ_NOT_AVAIL 0xFF
|
|
|
|
#define PINT_2_BANK(x) ((x) >> 5)
|
|
#define PINT_2_BIT(x) ((x) & 0x1F)
|
|
#define PINT_BIT(x) (1 << (PINT_2_BIT(x)))
|
|
|
|
static unsigned char irq2pint_lut[NR_PINTS];
|
|
static unsigned char pint2irq_lut[NR_PINT_SYS_IRQS * NR_PINT_BITS];
|
|
|
|
struct pin_int_t {
|
|
unsigned int mask_set;
|
|
unsigned int mask_clear;
|
|
unsigned int request;
|
|
unsigned int assign;
|
|
unsigned int edge_set;
|
|
unsigned int edge_clear;
|
|
unsigned int invert_set;
|
|
unsigned int invert_clear;
|
|
unsigned int pinstate;
|
|
unsigned int latch;
|
|
};
|
|
|
|
static struct pin_int_t *pint[NR_PINT_SYS_IRQS] = {
|
|
(struct pin_int_t *)PINT0_MASK_SET,
|
|
(struct pin_int_t *)PINT1_MASK_SET,
|
|
(struct pin_int_t *)PINT2_MASK_SET,
|
|
(struct pin_int_t *)PINT3_MASK_SET,
|
|
};
|
|
|
|
inline unsigned int get_irq_base(u32 bank, u8 bmap)
|
|
{
|
|
unsigned int irq_base;
|
|
|
|
if (bank < 2) { /*PA-PB */
|
|
irq_base = IRQ_PA0 + bmap * 16;
|
|
} else { /*PC-PJ */
|
|
irq_base = IRQ_PC0 + bmap * 16;
|
|
}
|
|
|
|
return irq_base;
|
|
}
|
|
|
|
/* Whenever PINTx_ASSIGN is altered init_pint_lut() must be executed! */
|
|
void init_pint_lut(void)
|
|
{
|
|
u16 bank, bit, irq_base, bit_pos;
|
|
u32 pint_assign;
|
|
u8 bmap;
|
|
|
|
memset(irq2pint_lut, IRQ_NOT_AVAIL, sizeof(irq2pint_lut));
|
|
|
|
for (bank = 0; bank < NR_PINT_SYS_IRQS; bank++) {
|
|
|
|
pint_assign = pint[bank]->assign;
|
|
|
|
for (bit = 0; bit < NR_PINT_BITS; bit++) {
|
|
|
|
bmap = (pint_assign >> ((bit / 8) * 8)) & 0xFF;
|
|
|
|
irq_base = get_irq_base(bank, bmap);
|
|
|
|
irq_base += (bit % 8) + ((bit / 8) & 1 ? 8 : 0);
|
|
bit_pos = bit + bank * NR_PINT_BITS;
|
|
|
|
pint2irq_lut[bit_pos] = irq_base - SYS_IRQS;
|
|
irq2pint_lut[irq_base - SYS_IRQS] = bit_pos;
|
|
}
|
|
}
|
|
}
|
|
|
|
static void bfin_gpio_ack_irq(struct irq_data *d)
|
|
{
|
|
u32 pint_val = irq2pint_lut[d->irq - SYS_IRQS];
|
|
u32 pintbit = PINT_BIT(pint_val);
|
|
u32 bank = PINT_2_BANK(pint_val);
|
|
|
|
if (irqd_get_trigger_type(d) == IRQ_TYPE_EDGE_BOTH) {
|
|
if (pint[bank]->invert_set & pintbit)
|
|
pint[bank]->invert_clear = pintbit;
|
|
else
|
|
pint[bank]->invert_set = pintbit;
|
|
}
|
|
pint[bank]->request = pintbit;
|
|
|
|
}
|
|
|
|
static void bfin_gpio_mask_ack_irq(struct irq_data *d)
|
|
{
|
|
u32 pint_val = irq2pint_lut[d->irq - SYS_IRQS];
|
|
u32 pintbit = PINT_BIT(pint_val);
|
|
u32 bank = PINT_2_BANK(pint_val);
|
|
|
|
if (irqd_get_trigger_type(d) == IRQ_TYPE_EDGE_BOTH) {
|
|
if (pint[bank]->invert_set & pintbit)
|
|
pint[bank]->invert_clear = pintbit;
|
|
else
|
|
pint[bank]->invert_set = pintbit;
|
|
}
|
|
|
|
pint[bank]->request = pintbit;
|
|
pint[bank]->mask_clear = pintbit;
|
|
}
|
|
|
|
static void bfin_gpio_mask_irq(struct irq_data *d)
|
|
{
|
|
u32 pint_val = irq2pint_lut[d->irq - SYS_IRQS];
|
|
|
|
pint[PINT_2_BANK(pint_val)]->mask_clear = PINT_BIT(pint_val);
|
|
}
|
|
|
|
static void bfin_gpio_unmask_irq(struct irq_data *d)
|
|
{
|
|
u32 pint_val = irq2pint_lut[d->irq - SYS_IRQS];
|
|
u32 pintbit = PINT_BIT(pint_val);
|
|
u32 bank = PINT_2_BANK(pint_val);
|
|
|
|
pint[bank]->mask_set = pintbit;
|
|
}
|
|
|
|
static unsigned int bfin_gpio_irq_startup(struct irq_data *d)
|
|
{
|
|
unsigned int irq = d->irq;
|
|
u32 gpionr = irq_to_gpio(irq);
|
|
u32 pint_val = irq2pint_lut[irq - SYS_IRQS];
|
|
|
|
if (pint_val == IRQ_NOT_AVAIL) {
|
|
printk(KERN_ERR
|
|
"GPIO IRQ %d :Not in PINT Assign table "
|
|
"Reconfigure Interrupt to Port Assignemt\n", irq);
|
|
return -ENODEV;
|
|
}
|
|
|
|
if (__test_and_set_bit(gpionr, gpio_enabled))
|
|
bfin_gpio_irq_prepare(gpionr);
|
|
|
|
bfin_gpio_unmask_irq(d);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void bfin_gpio_irq_shutdown(struct irq_data *d)
|
|
{
|
|
u32 gpionr = irq_to_gpio(d->irq);
|
|
|
|
bfin_gpio_mask_irq(d);
|
|
__clear_bit(gpionr, gpio_enabled);
|
|
bfin_gpio_irq_free(gpionr);
|
|
}
|
|
|
|
static int bfin_gpio_irq_type(struct irq_data *d, unsigned int type)
|
|
{
|
|
unsigned int irq = d->irq;
|
|
int ret;
|
|
char buf[16];
|
|
u32 gpionr = irq_to_gpio(irq);
|
|
u32 pint_val = irq2pint_lut[irq - SYS_IRQS];
|
|
u32 pintbit = PINT_BIT(pint_val);
|
|
u32 bank = PINT_2_BANK(pint_val);
|
|
|
|
if (pint_val == IRQ_NOT_AVAIL)
|
|
return -ENODEV;
|
|
|
|
if (type == IRQ_TYPE_PROBE) {
|
|
/* only probe unenabled GPIO interrupt lines */
|
|
if (test_bit(gpionr, gpio_enabled))
|
|
return 0;
|
|
type = IRQ_TYPE_EDGE_RISING | IRQ_TYPE_EDGE_FALLING;
|
|
}
|
|
|
|
if (type & (IRQ_TYPE_EDGE_RISING | IRQ_TYPE_EDGE_FALLING |
|
|
IRQ_TYPE_LEVEL_HIGH | IRQ_TYPE_LEVEL_LOW)) {
|
|
|
|
snprintf(buf, 16, "gpio-irq%d", irq);
|
|
ret = bfin_gpio_irq_request(gpionr, buf);
|
|
if (ret)
|
|
return ret;
|
|
|
|
if (__test_and_set_bit(gpionr, gpio_enabled))
|
|
bfin_gpio_irq_prepare(gpionr);
|
|
|
|
} else {
|
|
__clear_bit(gpionr, gpio_enabled);
|
|
return 0;
|
|
}
|
|
|
|
if ((type & (IRQ_TYPE_EDGE_FALLING | IRQ_TYPE_LEVEL_LOW)))
|
|
pint[bank]->invert_set = pintbit; /* low or falling edge denoted by one */
|
|
else
|
|
pint[bank]->invert_clear = pintbit; /* high or rising edge denoted by zero */
|
|
|
|
if ((type & (IRQ_TYPE_EDGE_RISING | IRQ_TYPE_EDGE_FALLING))
|
|
== (IRQ_TYPE_EDGE_RISING | IRQ_TYPE_EDGE_FALLING)) {
|
|
if (gpio_get_value(gpionr))
|
|
pint[bank]->invert_set = pintbit;
|
|
else
|
|
pint[bank]->invert_clear = pintbit;
|
|
}
|
|
|
|
if (type & (IRQ_TYPE_EDGE_RISING | IRQ_TYPE_EDGE_FALLING)) {
|
|
pint[bank]->edge_set = pintbit;
|
|
bfin_set_irq_handler(irq, handle_edge_irq);
|
|
} else {
|
|
pint[bank]->edge_clear = pintbit;
|
|
bfin_set_irq_handler(irq, handle_level_irq);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
#ifdef CONFIG_PM
|
|
static int bfin_gpio_set_wake(struct irq_data *d, unsigned int state)
|
|
{
|
|
u32 pint_irq;
|
|
u32 pint_val = irq2pint_lut[d->irq - SYS_IRQS];
|
|
u32 bank = PINT_2_BANK(pint_val);
|
|
|
|
switch (bank) {
|
|
case 0:
|
|
pint_irq = IRQ_PINT0;
|
|
break;
|
|
case 2:
|
|
pint_irq = IRQ_PINT2;
|
|
break;
|
|
case 3:
|
|
pint_irq = IRQ_PINT3;
|
|
break;
|
|
case 1:
|
|
pint_irq = IRQ_PINT1;
|
|
break;
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
|
|
bfin_internal_set_wake(pint_irq, state);
|
|
|
|
return 0;
|
|
}
|
|
#else
|
|
# define bfin_gpio_set_wake NULL
|
|
#endif
|
|
|
|
void bfin_demux_gpio_irq(unsigned int inta_irq,
|
|
struct irq_desc *desc)
|
|
{
|
|
u32 bank, pint_val;
|
|
u32 request, irq;
|
|
|
|
switch (inta_irq) {
|
|
case IRQ_PINT0:
|
|
bank = 0;
|
|
break;
|
|
case IRQ_PINT2:
|
|
bank = 2;
|
|
break;
|
|
case IRQ_PINT3:
|
|
bank = 3;
|
|
break;
|
|
case IRQ_PINT1:
|
|
bank = 1;
|
|
break;
|
|
default:
|
|
return;
|
|
}
|
|
|
|
pint_val = bank * NR_PINT_BITS;
|
|
|
|
request = pint[bank]->request;
|
|
|
|
while (request) {
|
|
if (request & 1) {
|
|
irq = pint2irq_lut[pint_val] + SYS_IRQS;
|
|
bfin_handle_irq(irq);
|
|
}
|
|
pint_val++;
|
|
request >>= 1;
|
|
}
|
|
|
|
}
|
|
#endif
|
|
|
|
static struct irq_chip bfin_gpio_irqchip = {
|
|
.name = "GPIO",
|
|
.irq_ack = bfin_gpio_ack_irq,
|
|
.irq_mask = bfin_gpio_mask_irq,
|
|
.irq_mask_ack = bfin_gpio_mask_ack_irq,
|
|
.irq_unmask = bfin_gpio_unmask_irq,
|
|
.irq_disable = bfin_gpio_mask_irq,
|
|
.irq_enable = bfin_gpio_unmask_irq,
|
|
.irq_set_type = bfin_gpio_irq_type,
|
|
.irq_startup = bfin_gpio_irq_startup,
|
|
.irq_shutdown = bfin_gpio_irq_shutdown,
|
|
.irq_set_wake = bfin_gpio_set_wake,
|
|
};
|
|
|
|
void __cpuinit init_exception_vectors(void)
|
|
{
|
|
/* cannot program in software:
|
|
* evt0 - emulation (jtag)
|
|
* evt1 - reset
|
|
*/
|
|
bfin_write_EVT2(evt_nmi);
|
|
bfin_write_EVT3(trap);
|
|
bfin_write_EVT5(evt_ivhw);
|
|
bfin_write_EVT6(evt_timer);
|
|
bfin_write_EVT7(evt_evt7);
|
|
bfin_write_EVT8(evt_evt8);
|
|
bfin_write_EVT9(evt_evt9);
|
|
bfin_write_EVT10(evt_evt10);
|
|
bfin_write_EVT11(evt_evt11);
|
|
bfin_write_EVT12(evt_evt12);
|
|
bfin_write_EVT13(evt_evt13);
|
|
bfin_write_EVT14(evt_evt14);
|
|
bfin_write_EVT15(evt_system_call);
|
|
CSYNC();
|
|
}
|
|
|
|
/*
|
|
* This function should be called during kernel startup to initialize
|
|
* the BFin IRQ handling routines.
|
|
*/
|
|
|
|
int __init init_arch_irq(void)
|
|
{
|
|
int irq;
|
|
unsigned long ilat = 0;
|
|
|
|
/* Disable all the peripheral intrs - page 4-29 HW Ref manual */
|
|
#ifdef SIC_IMASK0
|
|
bfin_write_SIC_IMASK0(SIC_UNMASK_ALL);
|
|
bfin_write_SIC_IMASK1(SIC_UNMASK_ALL);
|
|
# ifdef SIC_IMASK2
|
|
bfin_write_SIC_IMASK2(SIC_UNMASK_ALL);
|
|
# endif
|
|
# ifdef CONFIG_SMP
|
|
bfin_write_SICB_IMASK0(SIC_UNMASK_ALL);
|
|
bfin_write_SICB_IMASK1(SIC_UNMASK_ALL);
|
|
# endif
|
|
#else
|
|
bfin_write_SIC_IMASK(SIC_UNMASK_ALL);
|
|
#endif
|
|
|
|
local_irq_disable();
|
|
|
|
#ifdef CONFIG_BF54x
|
|
# ifdef CONFIG_PINTx_REASSIGN
|
|
pint[0]->assign = CONFIG_PINT0_ASSIGN;
|
|
pint[1]->assign = CONFIG_PINT1_ASSIGN;
|
|
pint[2]->assign = CONFIG_PINT2_ASSIGN;
|
|
pint[3]->assign = CONFIG_PINT3_ASSIGN;
|
|
# endif
|
|
/* Whenever PINTx_ASSIGN is altered init_pint_lut() must be executed! */
|
|
init_pint_lut();
|
|
#endif
|
|
|
|
for (irq = 0; irq <= SYS_IRQS; irq++) {
|
|
if (irq <= IRQ_CORETMR)
|
|
irq_set_chip(irq, &bfin_core_irqchip);
|
|
else
|
|
irq_set_chip(irq, &bfin_internal_irqchip);
|
|
|
|
switch (irq) {
|
|
#if defined(BF537_FAMILY)
|
|
case IRQ_PH_INTA_MAC_RX:
|
|
case IRQ_PF_INTA_PG_INTA:
|
|
#elif defined(BF533_FAMILY)
|
|
case IRQ_PROG_INTA:
|
|
#elif defined(CONFIG_BF54x)
|
|
case IRQ_PINT0:
|
|
case IRQ_PINT1:
|
|
case IRQ_PINT2:
|
|
case IRQ_PINT3:
|
|
#elif defined(CONFIG_BF52x) || defined(CONFIG_BF51x)
|
|
case IRQ_PORTF_INTA:
|
|
case IRQ_PORTG_INTA:
|
|
case IRQ_PORTH_INTA:
|
|
#elif defined(CONFIG_BF561)
|
|
case IRQ_PROG0_INTA:
|
|
case IRQ_PROG1_INTA:
|
|
case IRQ_PROG2_INTA:
|
|
#elif defined(BF538_FAMILY)
|
|
case IRQ_PORTF_INTA:
|
|
#endif
|
|
irq_set_chained_handler(irq, bfin_demux_gpio_irq);
|
|
break;
|
|
#if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE)
|
|
case IRQ_MAC_ERROR:
|
|
irq_set_chained_handler(irq,
|
|
bfin_demux_mac_status_irq);
|
|
break;
|
|
#endif
|
|
#ifdef CONFIG_SMP
|
|
case IRQ_SUPPLE_0:
|
|
case IRQ_SUPPLE_1:
|
|
irq_set_handler(irq, handle_percpu_irq);
|
|
break;
|
|
#endif
|
|
|
|
#ifdef CONFIG_TICKSOURCE_CORETMR
|
|
case IRQ_CORETMR:
|
|
# ifdef CONFIG_SMP
|
|
irq_set_handler(irq, handle_percpu_irq);
|
|
# else
|
|
irq_set_handler(irq, handle_simple_irq);
|
|
# endif
|
|
break;
|
|
#endif
|
|
|
|
#ifdef CONFIG_TICKSOURCE_GPTMR0
|
|
case IRQ_TIMER0:
|
|
irq_set_handler(irq, handle_simple_irq);
|
|
break;
|
|
#endif
|
|
|
|
default:
|
|
#ifdef CONFIG_IPIPE
|
|
irq_set_handler(irq, handle_level_irq);
|
|
#else
|
|
irq_set_handler(irq, handle_simple_irq);
|
|
#endif
|
|
break;
|
|
}
|
|
}
|
|
|
|
init_mach_irq();
|
|
|
|
#if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE)
|
|
for (irq = IRQ_MAC_PHYINT; irq <= IRQ_MAC_STMDONE; irq++)
|
|
irq_set_chip_and_handler(irq, &bfin_mac_status_irqchip,
|
|
handle_level_irq);
|
|
#endif
|
|
/* if configured as edge, then will be changed to do_edge_IRQ */
|
|
for (irq = GPIO_IRQ_BASE;
|
|
irq < (GPIO_IRQ_BASE + MAX_BLACKFIN_GPIOS); irq++)
|
|
irq_set_chip_and_handler(irq, &bfin_gpio_irqchip,
|
|
handle_level_irq);
|
|
|
|
bfin_write_IMASK(0);
|
|
CSYNC();
|
|
ilat = bfin_read_ILAT();
|
|
CSYNC();
|
|
bfin_write_ILAT(ilat);
|
|
CSYNC();
|
|
|
|
printk(KERN_INFO "Configuring Blackfin Priority Driven Interrupts\n");
|
|
/* IMASK=xxx is equivalent to STI xx or bfin_irq_flags=xx,
|
|
* local_irq_enable()
|
|
*/
|
|
program_IAR();
|
|
/* Therefore it's better to setup IARs before interrupts enabled */
|
|
search_IAR();
|
|
|
|
/* Enable interrupts IVG7-15 */
|
|
bfin_irq_flags |= IMASK_IVG15 |
|
|
IMASK_IVG14 | IMASK_IVG13 | IMASK_IVG12 | IMASK_IVG11 |
|
|
IMASK_IVG10 | IMASK_IVG9 | IMASK_IVG8 | IMASK_IVG7 | IMASK_IVGHW;
|
|
|
|
/* This implicitly covers ANOMALY_05000171
|
|
* Boot-ROM code modifies SICA_IWRx wakeup registers
|
|
*/
|
|
#ifdef SIC_IWR0
|
|
bfin_write_SIC_IWR0(IWR_DISABLE_ALL);
|
|
# ifdef SIC_IWR1
|
|
/* BF52x/BF51x system reset does not properly reset SIC_IWR1 which
|
|
* will screw up the bootrom as it relies on MDMA0/1 waking it
|
|
* up from IDLE instructions. See this report for more info:
|
|
* http://blackfin.uclinux.org/gf/tracker/4323
|
|
*/
|
|
if (ANOMALY_05000435)
|
|
bfin_write_SIC_IWR1(IWR_ENABLE(10) | IWR_ENABLE(11));
|
|
else
|
|
bfin_write_SIC_IWR1(IWR_DISABLE_ALL);
|
|
# endif
|
|
# ifdef SIC_IWR2
|
|
bfin_write_SIC_IWR2(IWR_DISABLE_ALL);
|
|
# endif
|
|
#else
|
|
bfin_write_SIC_IWR(IWR_DISABLE_ALL);
|
|
#endif
|
|
|
|
return 0;
|
|
}
|
|
|
|
#ifdef CONFIG_DO_IRQ_L1
|
|
__attribute__((l1_text))
|
|
#endif
|
|
static int vec_to_irq(int vec)
|
|
{
|
|
struct ivgx *ivg = ivg7_13[vec - IVG7].ifirst;
|
|
struct ivgx *ivg_stop = ivg7_13[vec - IVG7].istop;
|
|
unsigned long sic_status[3];
|
|
|
|
if (likely(vec == EVT_IVTMR_P))
|
|
return IRQ_CORETMR;
|
|
|
|
#ifdef SIC_ISR
|
|
sic_status[0] = bfin_read_SIC_IMASK() & bfin_read_SIC_ISR();
|
|
#else
|
|
if (smp_processor_id()) {
|
|
# ifdef SICB_ISR0
|
|
/* This will be optimized out in UP mode. */
|
|
sic_status[0] = bfin_read_SICB_ISR0() & bfin_read_SICB_IMASK0();
|
|
sic_status[1] = bfin_read_SICB_ISR1() & bfin_read_SICB_IMASK1();
|
|
# endif
|
|
} else {
|
|
sic_status[0] = bfin_read_SIC_ISR0() & bfin_read_SIC_IMASK0();
|
|
sic_status[1] = bfin_read_SIC_ISR1() & bfin_read_SIC_IMASK1();
|
|
}
|
|
#endif
|
|
#ifdef SIC_ISR2
|
|
sic_status[2] = bfin_read_SIC_ISR2() & bfin_read_SIC_IMASK2();
|
|
#endif
|
|
|
|
for (;; ivg++) {
|
|
if (ivg >= ivg_stop)
|
|
return -1;
|
|
#ifdef SIC_ISR
|
|
if (sic_status[0] & ivg->isrflag)
|
|
#else
|
|
if (sic_status[(ivg->irqno - IVG7) / 32] & ivg->isrflag)
|
|
#endif
|
|
return ivg->irqno;
|
|
}
|
|
}
|
|
|
|
#ifdef CONFIG_DO_IRQ_L1
|
|
__attribute__((l1_text))
|
|
#endif
|
|
void do_irq(int vec, struct pt_regs *fp)
|
|
{
|
|
int irq = vec_to_irq(vec);
|
|
if (irq == -1)
|
|
return;
|
|
asm_do_IRQ(irq, fp);
|
|
}
|
|
|
|
#ifdef CONFIG_IPIPE
|
|
|
|
int __ipipe_get_irq_priority(unsigned irq)
|
|
{
|
|
int ient, prio;
|
|
|
|
if (irq <= IRQ_CORETMR)
|
|
return irq;
|
|
|
|
for (ient = 0; ient < NR_PERI_INTS; ient++) {
|
|
struct ivgx *ivg = ivg_table + ient;
|
|
if (ivg->irqno == irq) {
|
|
for (prio = 0; prio <= IVG13-IVG7; prio++) {
|
|
if (ivg7_13[prio].ifirst <= ivg &&
|
|
ivg7_13[prio].istop > ivg)
|
|
return IVG7 + prio;
|
|
}
|
|
}
|
|
}
|
|
|
|
return IVG15;
|
|
}
|
|
|
|
/* Hw interrupts are disabled on entry (check SAVE_CONTEXT). */
|
|
#ifdef CONFIG_DO_IRQ_L1
|
|
__attribute__((l1_text))
|
|
#endif
|
|
asmlinkage int __ipipe_grab_irq(int vec, struct pt_regs *regs)
|
|
{
|
|
struct ipipe_percpu_domain_data *p = ipipe_root_cpudom_ptr();
|
|
struct ipipe_domain *this_domain = __ipipe_current_domain;
|
|
struct ivgx *ivg_stop = ivg7_13[vec-IVG7].istop;
|
|
struct ivgx *ivg = ivg7_13[vec-IVG7].ifirst;
|
|
int irq, s = 0;
|
|
|
|
irq = vec_to_irq(vec);
|
|
if (irq == -1)
|
|
return 0;
|
|
|
|
if (irq == IRQ_SYSTMR) {
|
|
#if !defined(CONFIG_GENERIC_CLOCKEVENTS) || defined(CONFIG_TICKSOURCE_GPTMR0)
|
|
bfin_write_TIMER_STATUS(1); /* Latch TIMIL0 */
|
|
#endif
|
|
/* This is basically what we need from the register frame. */
|
|
__raw_get_cpu_var(__ipipe_tick_regs).ipend = regs->ipend;
|
|
__raw_get_cpu_var(__ipipe_tick_regs).pc = regs->pc;
|
|
if (this_domain != ipipe_root_domain)
|
|
__raw_get_cpu_var(__ipipe_tick_regs).ipend &= ~0x10;
|
|
else
|
|
__raw_get_cpu_var(__ipipe_tick_regs).ipend |= 0x10;
|
|
}
|
|
|
|
/*
|
|
* We don't want Linux interrupt handlers to run at the
|
|
* current core priority level (i.e. < EVT15), since this
|
|
* might delay other interrupts handled by a high priority
|
|
* domain. Here is what we do instead:
|
|
*
|
|
* - we raise the SYNCDEFER bit to prevent
|
|
* __ipipe_handle_irq() to sync the pipeline for the root
|
|
* stage for the incoming interrupt. Upon return, that IRQ is
|
|
* pending in the interrupt log.
|
|
*
|
|
* - we raise the TIF_IRQ_SYNC bit for the current thread, so
|
|
* that _schedule_and_signal_from_int will eventually sync the
|
|
* pipeline from EVT15.
|
|
*/
|
|
if (this_domain == ipipe_root_domain) {
|
|
s = __test_and_set_bit(IPIPE_SYNCDEFER_FLAG, &p->status);
|
|
barrier();
|
|
}
|
|
|
|
ipipe_trace_irq_entry(irq);
|
|
__ipipe_handle_irq(irq, regs);
|
|
ipipe_trace_irq_exit(irq);
|
|
|
|
if (user_mode(regs) &&
|
|
!ipipe_test_foreign_stack() &&
|
|
(current->ipipe_flags & PF_EVTRET) != 0) {
|
|
/*
|
|
* Testing for user_regs() does NOT fully eliminate
|
|
* foreign stack contexts, because of the forged
|
|
* interrupt returns we do through
|
|
* __ipipe_call_irqtail. In that case, we might have
|
|
* preempted a foreign stack context in a high
|
|
* priority domain, with a single interrupt level now
|
|
* pending after the irqtail unwinding is done. In
|
|
* which case user_mode() is now true, and the event
|
|
* gets dispatched spuriously.
|
|
*/
|
|
current->ipipe_flags &= ~PF_EVTRET;
|
|
__ipipe_dispatch_event(IPIPE_EVENT_RETURN, regs);
|
|
}
|
|
|
|
if (this_domain == ipipe_root_domain) {
|
|
set_thread_flag(TIF_IRQ_SYNC);
|
|
if (!s) {
|
|
__clear_bit(IPIPE_SYNCDEFER_FLAG, &p->status);
|
|
return !test_bit(IPIPE_STALL_FLAG, &p->status);
|
|
}
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
#endif /* CONFIG_IPIPE */
|