Gavin Shan 353169acf1 powerpc/eeh: Fix recursive fenced PHB on Broadcom shiner adapter ... Similar to commit b6541db ("powerpc/eeh: Block PCI config access upon frozen PE"), this blocks the PCI config space of Broadcom Shiner adapter until PE reset is completed, to avoid recursive fenced PHB when dumping PCI config registers during the period of error recovery. ~# lspci -ns 0003:03:00.0 0003:03:00.0 0200: 14e4:168a (rev 10) ~# lspci -s 0003:03:00.0 0003:03:00.0 Ethernet controller: Broadcom Corporation \ NetXtreme II BCM57800 1/10 Gigabit Ethernet (rev 10) Signed-off-by: Gavin Shan <gwshan@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>		2015-10-21 20:42:16 +11:00
..
eeh-powernv.c	powerpc/eeh: Fix recursive fenced PHB on Broadcom shiner adapter	2015-10-21 20:42:16 +11:00
idle.c	powerpc/powernv: pnv_init_idle_states() should only run on powernv	2015-06-15 16:45:12 +10:00
Kconfig	powerpc/powernv: Add opal-prd channel	2015-06-05 08:32:21 +10:00
Makefile	powerpc/powernv: Add opal-prd channel	2015-06-05 08:32:21 +10:00
opal-async.c	powerpc/powernv: Reorder OPAL subsystem initialisation	2015-05-22 15:14:37 +10:00
opal-dump.c	powernv/opal-dump: Convert to irq domain	2015-05-22 15:14:38 +10:00
opal-elog.c	powerpc/powernv: Fix opal-elog interrupt handler	2015-07-06 20:24:36 +10:00
opal-flash.c	powerpc/powernv: Add interfaces for flash device access	2015-04-11 20:49:21 +10:00
opal-hmi.c	powerpc/powernv: Invoke opal_cec_reboot2() on unrecoverable HMI.	2015-08-06 15:10:19 +10:00
opal-irqchip.c	genirq/irqdomain: Allow irq domain aliasing	2015-07-30 00:14:36 +02:00
opal-lpc.c	powerpc/powernv: Properly fix LPC debugfs endianness	2014-10-31 17:09:04 +11:00
opal-memory-errors.c	powerpc/powernv: Reorder OPAL subsystem initialisation	2015-05-22 15:14:37 +10:00
opal-msglog.c	powerpc/powernv: Fix reading of OPAL msglog	2014-06-11 17:03:36 +10:00
opal-nvram.c	powerpc/powernv: Add pstore support on powernv	2015-03-23 14:06:10 +11:00
opal-power.c	powerpc/powernv: Add poweroff (EPOW, DPO) events support for PowerNV platform	2015-07-16 13:34:36 +10:00
opal-prd.c	powerpc/powernv: Fix vma page prot flags in opal-prd driver	2015-07-06 12:06:42 +10:00
opal-rtc.c	rtc/tpo: Driver to support rtc and wakeup on PowerNV platform	2014-11-17 18:04:01 +11:00
opal-sensor.c	powerpc/powernv: Reorder OPAL subsystem initialisation	2015-05-22 15:14:37 +10:00
opal-sysparam.c	powerpc/powernv: convert OPAL codes returned by sysparam calls	2015-06-04 22:27:56 +10:00
opal-tracepoints.c	powerpc: Replace __get_cpu_var uses	2014-11-03 12:12:32 +11:00
opal-wrappers.S	powerpc/powernv: Add OPAL interfaces for accessing and modifying system LED states	2015-08-20 18:19:07 +10:00
opal-xscom.c	powerpc/powernv: Switch powernv drivers to use machine_xxx_initcall()	2014-07-28 14:11:26 +10:00
opal.c	powerpc/powernv: Create LED platform device	2015-08-20 18:19:07 +10:00
pci-ioda.c	powerpc/powernv/pci-ioda: fix kdump with non-power-of-2 crashkernel=	2015-09-07 20:14:18 +10:00
pci-p5ioc2.c	vfio: powerpc/spapr: powerpc/powernv/ioda: Define and implement DMA windows API	2015-06-11 15:16:52 +10:00
pci.c	powerpc/MSI: Fix race condition in tearing down MSI interrupts	2015-09-10 17:27:08 +10:00
pci.h	powerpc/powernv: move dma_get_required_mask from pnv_phb to pci_controller_ops	2015-08-18 19:32:11 +10:00
powernv.h	powerpc/powernv: move dma_get_required_mask from pnv_phb to pci_controller_ops	2015-08-18 19:32:11 +10:00
rng.c	powerpc: Use hardware RNG for arch_get_random_seed_* not arch_get_random_*	2015-07-23 19:52:03 +10:00
setup.c	powerpc/kexec: Wait 1s for secondaries to enter OPAL	2015-10-06 21:57:42 +11:00
smp.c	powerpc updates for 4.1	2015-04-16 13:53:32 -05:00
subcore-asm.S	powerpc/powernv: Add support for POWER8 split core on powernv	2014-05-28 13:35:37 +10:00
subcore.c	powerpc: Add an inline function to update POWER8 HID0	2015-08-14 15:58:28 +10:00
subcore.h	powernv/powerpc: Add winkle support for offline cpus	2014-12-15 10:46:41 +11:00