renegade-project/linux-next
2
0
Fork 0
mirror of https://github.com/edk2-porting/linux-next.git synced 2024-12-24 13:13:57 +08:00
Code
1a47401bb3
linux-next/drivers/scsi
History
Matthew R. Ochs 1a47401bb3 cxlflash: Fix to avoid corrupting port selection mask 
The port selection mask of a LUN can be corrupted when the manage LUN
ioctl (DK_CXLFLASH_MANAGE_LUN) is issued more than once for any device.

This mask indicates to the AFU which port[s] can be used for a data
transfer to/from a particular LUN. The mask is critical to ensuring the
correct behavior when using the virtual LUN function of this adapter.
When the mask is configured for both ports, an I/O may be sent to either
port as the AFU assumes that each port has access to the same physical
device (specified by LUN ID in the port LUN table).

In a situation where the mask becomes incorrectly configured to reflect
access to both ports when in fact there is only access through a single
port, an I/O can be targeted to the wrong physical device. This can lead
to data corruption among other ill effects (e.g. security leaks).

The cause for this corruption is the assumption that the ioctl will only
be called a second time for a LUN when it is being configured for access
via a second port. A boolean 'newly_created' variable is used to
differentiate between a LUN that was created (and subsequently configured
for single port access) and one that is destined for access across both
ports. While initially set to 'true', this sticky boolean is toggled to
the 'false' state during a lookup on any next ioctl performed on a device
with a matching WWN/WWID. The code fails to realize that the match could
in fact be the same device calling in again. From here, an assumption is
made that any LUN with 'newly_created' set to 'false' is configured for
access over both ports and the port selection mask is set to reflect this.
Any future attempts to use this LUN for hosting a virtual LUN will result
in the port LUN table being incorrectly programmed.

As a remedy, the 'newly_created' concept was removed entirely and replaced
with code that always constructs the port selection mask based upon the
SCSI channel of the LUN being accessed. The bits remain sticky, therefore
allowing for a device to be accessed over both ports when that is in fact
the correct physical configuration.

Also included in this commit are a few minor related changes to enhance
the fix and provide better debug information for port selection mask and
port LUN table bugs in the future. These include renaming refresh_local()
to lookup_local(), tracing the WWN/WWID as a big-endian entity, and
tracing the port selection mask, SCSI channel, and LUN ID each time the
port LUN table is programmed.

Signed-off-by: Matthew R. Ochs <mrochs@linux.vnet.ibm.com>
Acked-by: Manoj Kumar <manoj@linux.vnet.ibm.com>
Reviewed-by: Andrew Donnellan <andrew.donnellan@au1.ibm.com>
Signed-off-by: James Bottomley <JBottomley@Odin.com>
2015-10-30 17:23:55 +09:00
..
aacraid aacraid: aac_src_intr_message() can be static 2015-05-25 08:46:25 -07:00
aic7xxx aic7xxx: Fix typo in error message 2015-08-07 14:36:05 +02:00
aic94xx SCSI misc on 20150911 2015-09-11 18:15:18 -07:00
arcmsr libnvdimm for 4.3: 2015-09-08 14:35:59 -07:00
arm scsi: Do not set cmd_per_lun to 1 in the host template 2015-05-31 18:06:28 -07:00
be2iscsi be2iscsi: Revert ownership to Emulex 2015-10-27 10:34:18 +09:00
bfa bfa: Fix incorrect de-reference of pointer 2015-09-06 11:39:53 -07:00
bnx2fc bnx2fc: Do not log error for netevents that need no action 2015-10-27 10:29:13 +09:00
bnx2i bnx2i: Fix call trace while device reset 2015-06-02 17:15:24 -07:00
csiostor csiostor: fix an error code in csio_hw_init() 2015-05-25 08:46:26 -07:00
cxgbi libcxgbi: use kvfree() in cxgbi_free_big_mem() 2015-06-30 19:45:00 -07:00
cxlflash cxlflash: Fix to avoid corrupting port selection mask 2015-10-30 17:23:55 +09:00
device_handler scsi_dh: kill struct scsi_dh_data 2015-08-28 13:14:57 -07:00
dpt
esas2r SCSI misc on 20150209 2015-02-11 10:28:45 -08:00
fcoe SCSI misc on 20150911 2015-09-11 18:15:18 -07:00
fnic fnic: check pci_map_single() return value 2015-10-27 11:05:45 +09:00
ibmvscsi IB/srp: Add 64-bit LUN support 2015-05-18 13:35:56 -04:00
isci scsi: Do not set cmd_per_lun to 1 in the host template 2015-05-31 18:06:28 -07:00
libfc SCSI misc on 20150901 2015-09-02 12:22:54 -07:00
libsas Merge branch 'for-4.0-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata 2015-03-24 17:08:29 -07:00
lpfc lpfc: Update version to 11.0.0.0 for upstream patch set 2015-10-27 10:24:46 +09:00
megaraid megaraid_sas: fix whitespace errors 2015-08-26 07:36:51 -07:00
mpt2sas mpt2sas: setpci reset kernel oops fix 2015-09-06 11:57:25 -07:00
mpt3sas mpt3sas : Bump mpt3sas driver version to 9.100.00.00 2015-08-27 11:08:31 -07:00
mvsas libnvdimm for 4.3: 2015-09-08 14:35:59 -07:00
osd Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial 2015-04-14 09:50:27 -07:00
pcmcia scsi: Do not set cmd_per_lun to 1 in the host template 2015-05-31 18:06:28 -07:00
pm8001 pm80xx: Don't override ts->stat on IO_OPEN_CNX_ERROR_HW_RESOURCE_BUSY 2015-09-06 11:53:31 -07:00
qla2xxx Merge branch 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending 2015-09-11 19:00:42 -07:00
qla4xxx Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next 2015-06-24 16:49:49 -07:00
snic snic: driver for Cisco SCSI HBA 2015-06-19 16:57:51 -07:00
sym53c8xx_2 scsi: drop reason argument from ->change_queue_depth 2014-11-24 14:45:27 +01:00
ufs SCSI misc on 20150622 2015-06-23 15:55:44 -07:00
.gitignore
3w-9xxx.c 3w-9xxx: don't unmap bounce buffered commands 2015-10-07 10:24:48 -07:00
3w-9xxx.h 3w-9xxx: fix command completion race 2015-04-27 10:10:19 -07:00
3w-sas.c 3w-sas: fix command completion race 2015-04-27 10:04:39 -07:00
3w-sas.h 3w-sas: fix command completion race 2015-04-27 10:04:39 -07:00
3w-xxxx.c 3w-xxxx: fix command completion race 2015-04-27 10:05:55 -07:00
3w-xxxx.h 3w-xxxx: fix command completion race 2015-04-27 10:05:55 -07:00
53c700_d.h_shipped
53c700.c [SCSI] Fix printk typos in drivers/scsi 2015-08-07 14:28:45 +02:00
53c700.h
53c700.scr
a100u2w.c scsi: a100u2w: trivial typo in printk 2015-08-07 15:03:42 +02:00
a100u2w.h
a2091.c zorro: ZTWO_VADDR() should return "void __iomem *" 2013-11-26 11:09:07 +01:00
a2091.h
a3000.c scsi: drop owner assignment from platform_drivers 2014-10-20 16:21:33 +02:00
a3000.h
a4000t.c scsi: drop owner assignment from platform_drivers 2014-10-20 16:21:33 +02:00
advansys.c advansys: fix compilation errors and warnings when CONFIG_PCI is not set 2015-06-13 08:42:36 -07:00
aha152x.c scsi: Do not set cmd_per_lun to 1 in the host template 2015-05-31 18:06:28 -07:00
aha152x.h
aha1542.c scsi: Do not set cmd_per_lun to 1 in the host template 2015-05-31 18:06:28 -07:00
aha1542.h aha1542: fix include guard and remove useless changelog 2015-04-09 18:08:31 -07:00
aha1740.c scsi: Do not set cmd_per_lun to 1 in the host template 2015-05-31 18:06:28 -07:00
aha1740.h scsi: Do not set cmd_per_lun to 1 in the host template 2015-05-31 18:06:28 -07:00
am53c974.c am53c974: Fix crash during modprobe 2015-04-17 10:13:56 -07:00
atari_NCR5380.c ncr5380: Harmonize jiffies conversion with msecs_to_jiffies 2015-03-09 10:45:26 -04:00
atari_scsi.c ncr5380: Drop owner assignment from platform_drivers 2015-03-09 07:18:14 -04:00
atp870u.c scsi: Do not set cmd_per_lun to 1 in the host template 2015-05-31 18:06:28 -07:00
atp870u.h scsi: Do not set cmd_per_lun to 1 in the host template 2015-05-31 18:06:28 -07:00
BusLogic.c scsi: replace seq_printf with seq_puts 2015-02-02 09:57:45 -08:00
BusLogic.h [SCSI] BusLogic: Port driver to 64-bit. 2013-06-26 18:32:47 -07:00
bvme6000_scsi.c scsi: drop owner assignment from platform_drivers 2014-10-20 16:21:33 +02:00
ch.c Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial 2015-04-14 09:50:27 -07:00
constants.c scsi: Conditionally compile in constants.c 2015-01-09 15:44:31 +01:00
dc395x.c scsi: print single-character strings with seq_putc 2015-02-02 09:57:46 -08:00
dc395x.h
dmx3191d.c dmx3191d: Use NO_IRQ 2014-11-20 09:11:11 +01:00
dpt_i2o.c x86/vm86: Clean up vm86.h includes 2015-07-31 13:31:10 +02:00
dpti.h scsi: use 64-bit LUNs 2014-07-17 22:07:37 +02:00
dtc.c ncr5380: Drop legacy scsi.h include 2014-11-20 09:11:10 +01:00
dtc.h ncr5380: Remove *_RELEASE macros 2014-11-20 09:11:10 +01:00
eata_generic.h
eata_pio.c scsi: replace seq_printf with seq_puts 2015-02-02 09:57:45 -08:00
eata_pio.h
eata.c scsi: drop reason argument from ->change_queue_depth 2014-11-24 14:45:27 +01:00
esp_scsi.c esp_scsi: remove check for ESP_MAX_TAGS 2015-01-09 15:44:23 +01:00
esp_scsi.h esp_scsi: correctly detect am53c974 2014-11-24 16:13:16 +01:00
fdomain.c scsi: Do not set cmd_per_lun to 1 in the host template 2015-05-31 18:06:28 -07:00
fdomain.h
FlashPoint.c [SCSI] BusLogic: Port driver to 64-bit. 2013-06-26 18:32:47 -07:00
g_NCR5380_mmio.c
g_NCR5380.c ncr5380: Harmonize jiffies conversion with msecs_to_jiffies 2015-03-09 10:45:26 -04:00
g_NCR5380.h ncr5380: Remove *_RELEASE macros 2014-11-20 09:11:10 +01:00
gdth_ioctl.h
gdth_proc.c scsi: replace seq_printf with seq_puts 2015-02-02 09:57:45 -08:00
gdth_proc.h
gdth.c scsi: rename SERVICE_ACTION_IN to SERVICE_ACTION_IN_16 2014-11-24 20:01:40 +01:00
gdth.h
gvp11.c zorro: ZTWO_VADDR() should return "void __iomem *" 2013-11-26 11:09:07 +01:00
gvp11.h
hosts.c scsi: remove ordered_tag host template field 2014-11-12 11:19:41 +01:00
hpsa_cmd.h hpsa: add in new offline mode 2015-08-26 16:28:48 -07:00
hpsa.c hpsa: fix rmmod issues 2015-08-26 16:29:49 -07:00
hpsa.h Change how controllers in mixed mode are handled. 2015-08-26 16:28:15 -07:00
hptiop.c hptiop: Support HighPoint RR36xx HBAs and Support SAS tape and SAS media changer 2015-08-12 13:14:57 -07:00
hptiop.h hptiop: Support HighPoint RR36xx HBAs and Support SAS tape and SAS media changer 2015-08-12 13:14:57 -07:00
imm.c scsi: Do not set cmd_per_lun to 1 in the host template 2015-05-31 18:06:28 -07:00
imm.h
in2000.c scsi: print single-character strings with seq_putc 2015-02-02 09:57:46 -08:00
in2000.h
initio.c scsi: Do not set cmd_per_lun to 1 in the host template 2015-05-31 18:06:28 -07:00
initio.h
ipr.c ipr: Enable SIS pipe commands for SIS-32 devices. 2015-08-28 13:14:53 -07:00
ipr.h ipr: Driver version 2.6.2 2015-07-30 12:41:47 -07:00
ips.c ips: remove pointless #warning 2015-06-02 17:24:54 -07:00
ips.h
iscsi_boot_sysfs.c [SCSI] iscsi_boot_sysfs: Fix a memory leak in iscsi_boot_destroy_kset() 2014-03-15 10:19:19 -07:00
iscsi_tcp.c scsi: drop reason argument from ->change_queue_depth 2014-11-24 14:45:27 +01:00
iscsi_tcp.h net: Fix use after free by removing length arg from sk_data_ready callbacks. 2014-04-11 16:15:36 -04:00
jazz_esp.c scsi: drop owner assignment from platform_drivers 2014-10-20 16:21:33 +02:00
Kconfig cxlflash: Base support for IBM CXL Flash Adapter 2015-07-30 21:02:01 -07:00
lasi700.c
libiscsi_tcp.c [SCSI] libiscsi: Reduce locking contention in fast path 2014-03-15 10:19:18 -07:00
libiscsi.c libiscsi: Fix iscsi_check_transport_timeouts possible infinite loop 2015-09-17 07:25:02 -07:00
mac53c94.c scsi: Do not set cmd_per_lun to 1 in the host template 2015-05-31 18:06:28 -07:00
mac53c94.h
mac_esp.c scsi: drop owner assignment from platform_drivers 2014-10-20 16:21:33 +02:00
mac_scsi.c ncr5380: Drop owner assignment from platform_drivers 2015-03-09 07:18:14 -04:00
Makefile scsi_dh: integrate into the core SCSI code 2015-08-28 13:14:56 -07:00
megaraid.c megaraid : use dev_printk when possible 2015-08-26 07:23:04 -07:00
megaraid.h [SCSI] megaraid: simplify internal command handling 2014-03-27 08:26:31 -07:00
mesh.c powerpc: Move Power Macintosh drivers to generic byteswappers 2015-03-23 14:29:40 +11:00
mesh.h
mvme16x_scsi.c scsi: drop owner assignment from platform_drivers 2014-10-20 16:21:33 +02:00
mvme147.c
mvme147.h
mvumi.c PCI: Remove DEFINE_PCI_DEVICE_TABLE macro use 2014-08-12 12:15:14 -06:00
mvumi.h
ncr53c8xx.c scsi: drop reason argument from ->change_queue_depth 2014-11-24 14:45:27 +01:00
ncr53c8xx.h scsi: Remove CONFIG_SCSI_MULTI_LUN 2014-07-17 22:07:35 +02:00
NCR53c406a.c scsi: Do not set cmd_per_lun to 1 in the host template 2015-05-31 18:06:28 -07:00
NCR5380.c ncr5380: Harmonize jiffies conversion with msecs_to_jiffies 2015-03-09 10:45:26 -04:00
NCR5380.h atari_NCR5380: Move static co-routine variables to host data 2014-11-20 09:11:20 +01:00
NCR_D700.c
NCR_D700.h
NCR_Q720.c
NCR_Q720.h
nsp32_debug.c
nsp32_io.h
nsp32.c scsi: Do not set cmd_per_lun to 1 in the host template 2015-05-31 18:06:28 -07:00
nsp32.h
osst_detect.h
osst_options.h
osst.c scsi: remove scsi_driver owner field 2014-11-24 20:01:28 +01:00
osst.h
pas16.c ncr5380: Drop legacy scsi.h include 2014-11-20 09:11:10 +01:00
pas16.h ncr5380: Remove *_RELEASE macros 2014-11-20 09:11:10 +01:00
pmcraid.c Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next 2015-02-10 20:01:30 -08:00
pmcraid.h
ppa.c scsi: Do not set cmd_per_lun to 1 in the host template 2015-05-31 18:06:28 -07:00
ppa.h
ps3rom.c scsi: Do not set cmd_per_lun to 1 in the host template 2015-05-31 18:06:28 -07:00
qla1280.c scsi: Do not set cmd_per_lun to 1 in the host template 2015-05-31 18:06:28 -07:00
qla1280.h
qlogicfas408.c
qlogicfas408.h
qlogicfas.c scsi: Do not set cmd_per_lun to 1 in the host template 2015-05-31 18:06:28 -07:00
qlogicpti.c scsi: Do not set cmd_per_lun to 1 in the host template 2015-05-31 18:06:28 -07:00
qlogicpti.h
raid_class.c
script_asm.pl
scsi_common.c scsi: Protect against buffer possible overflow in scsi_set_sense_information 2015-07-23 22:53:05 -07:00
scsi_debug.c scsi_debug: resp_request: remove unused variable 2015-09-06 11:03:14 -07:00
scsi_devinfo.c SCSI: fix bug in scsi_dev_info_list matching 2015-10-27 11:09:41 +09:00
scsi_dh.c scsi_dh: Use the correct module name when loading device handler 2015-10-01 10:46:28 -07:00
scsi_error.c Merge branch 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending 2015-09-11 19:00:42 -07:00
scsi_ioctl.c scsi: return EAGAIN when resetting a device under EH 2014-11-12 11:16:12 +01:00
scsi_lib_dma.c
scsi_lib.c scsi_dh: kill struct scsi_dh_data 2015-08-28 13:14:57 -07:00
scsi_logging.c scsi_logging: return void for dev_printk() functions 2015-02-04 08:00:24 -08:00
scsi_logging.h scsi: simplify scsi_log_(send|completion) 2014-11-12 11:16:05 +01:00
scsi_module.c
scsi_netlink.c net: Use netlink_ns_capable to verify the permisions of netlink messages 2014-04-24 13:44:54 -04:00
scsi_pm.c SCSI: Fix NULL pointer dereference in runtime PM 2015-08-18 08:14:14 -07:00
scsi_priv.h scsi_dh: integrate into the core SCSI code 2015-08-28 13:14:56 -07:00
scsi_proc.c scsi: print single-character strings with seq_putc 2015-02-02 09:57:46 -08:00
scsi_sas_internal.h
scsi_scan.c Move code that is used both by initiator and target drivers 2015-06-01 07:32:43 -07:00
scsi_sysctl.c scsi: convert use of typedef ctl_table to struct ctl_table 2014-06-06 16:08:16 -07:00
scsi_sysfs.c scsi_dh: integrate into the core SCSI code 2015-08-28 13:14:56 -07:00
scsi_trace.c scsi: print single-character strings with seq_putc 2015-02-02 09:57:46 -08:00
scsi_transport_api.h
scsi_transport_fc.c scsi_transport_fc: Add support for 25Gbit speed 2015-04-10 07:40:32 -07:00
scsi_transport_iscsi.c SCSI misc on 20150901 2015-09-02 12:22:54 -07:00
scsi_transport_sas.c scsi_transport_sas: Remove check for SAS expander when querying bay/enclosure IDs. 2015-09-06 11:13:41 -07:00
scsi_transport_spi.c [SCSI] Fix printk typos in drivers/scsi 2015-08-07 14:28:45 +02:00
scsi_transport_srp.c IB/srp: Avoid using uninitialized variable 2015-07-14 13:20:09 -04:00
scsi_typedefs.h
scsi.c Move code that is used both by initiator and target drivers 2015-06-01 07:32:43 -07:00
scsi.h
scsicam.c scsi: PC partition tables are little endian 2014-11-12 11:15:54 +01:00
sd_dif.c sd: Fix missing ATO tag check 2015-04-16 10:37:12 -07:00
sd.c Merge branch 'for-4.3/core' of git://git.kernel.dk/linux-block 2015-09-02 13:10:25 -07:00
sd.h scsi: introduce sdev_prefix_printk() 2014-11-12 11:15:57 +01:00
ses.c ses: Add power_status to SES device slot 2015-01-09 15:44:19 +01:00
sg.c sg_start_req(): use import_iovec() 2015-04-11 22:27:14 -04:00
sgiwd93.c scsi: drop owner assignment from platform_drivers 2014-10-20 16:21:33 +02:00
sim710.c
sni_53c710.c scsi: drop owner assignment from platform_drivers 2014-10-20 16:21:33 +02:00
sr_ioctl.c sr: reduce debug noise in sr_do_ioctl 2015-01-20 19:43:24 +01:00
sr_vendor.c scsi: Implement sr_printk() 2014-07-17 22:07:39 +02:00
sr.c scsi: remove scsi_driver owner field 2014-11-24 20:01:28 +01:00
sr.h scsi: introduce sdev_prefix_printk() 2014-11-12 11:15:57 +01:00
st_options.h
st.c st: Destroy st_index_idr on module exit 2015-08-26 07:45:25 -07:00
st.h st: implement tape statistics 2015-06-02 08:03:25 -07:00
stex.c scsi: don't force tagged_supported in drivers 2014-11-12 11:19:44 +01:00
storvsc_drv.c storvsc: Set the error code correctly in failure conditions 2015-08-26 22:41:36 -07:00
sun3_scsi_vme.c scsi/NCR5380: merge sun3_scsi_vme.c into sun3_scsi.c 2014-05-28 12:16:28 +02:00
sun3_scsi.c ncr5380: Drop owner assignment from platform_drivers 2015-03-09 07:18:14 -04:00
sun3_scsi.h sun3_scsi: Move macro definitions 2014-11-20 09:11:15 +01:00
sun3x_esp.c arch, drivers: don't include <asm/io.h> directly, use <linux/io.h> instead 2015-08-10 23:07:05 -04:00
sun_esp.c scsi: drop owner assignment from platform_drivers 2014-10-20 16:21:33 +02:00
sym53c416.c scsi: Do not set cmd_per_lun to 1 in the host template 2015-05-31 18:06:28 -07:00
sym53c416.h
t128.c ncr5380: Drop legacy scsi.h include 2014-11-20 09:11:10 +01:00
t128.h ncr5380: Remove *_RELEASE macros 2014-11-20 09:11:10 +01:00
u14-34f.c scsi: drop reason argument from ->change_queue_depth 2014-11-24 14:45:27 +01:00
ultrastor.c
ultrastor.h
virtio_scsi.c virtio/vhost: fixes for 4.2 2015-07-23 13:07:04 -07:00
vmw_pvscsi.c vmw_pscsi: simplify ->change_queue_depth 2014-11-24 14:45:28 +01:00
vmw_pvscsi.h PCI: Move PCI_VENDOR_ID_VMWARE to pci_ids.h 2014-09-24 11:52:09 -06:00
wd33c93.c scsi: print single-character strings with seq_putc 2015-02-02 09:57:46 -08:00
wd33c93.h
wd719x.c [SCSI] Fix printk typos in drivers/scsi 2015-08-07 14:28:45 +02:00
wd719x.h scsi: Do not set cmd_per_lun to 1 in the host template 2015-05-31 18:06:28 -07:00
wd7000.c scsi: replace seq_printf with seq_puts 2015-02-02 09:57:45 -08:00
xen-scsifront.c xen: Use correctly the Xen memory terminologies 2015-09-08 18:03:49 +01:00
zalon.c
zorro7xx.c zorro: ZTWO_VADDR() should return "void __iomem *" 2013-11-26 11:09:07 +01:00