Hans de Goede 1911f48de0 iio: accel: bmc150: Add support for BOSC0200 ACPI device id ... Add support for the BOSC0200 ACPI device id used on some x86 tablets. note driver_data is not set to a specific model, driver_data is not used anyways (instead detection is done on the chip_id reg) and the 2 tablets with a BOSC0200 ACPI device id I've have 2 different chips, one has a BMA250E, the other a BMA222E. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>		2017-07-01 10:16:37 +01:00
..
accel	iio: accel: bmc150: Add support for BOSC0200 ACPI device id	2017-07-01 10:16:37 +01:00
adc	Second set of IIO new device support, features and cleanups for the 4.13 cycle.	2017-06-26 07:09:23 +02:00
amplifiers
buffer	iio: buffer-dmaengine: Add missing header buffer_impl.h	2017-06-13 20:56:05 +01:00
chemical	drivers: iio: chemical: replace comma with a semicolon	2017-03-30 19:13:23 +01:00
common	iio hid-sensor-trigger: add Kconfig depends on IIO_BUFFER	2017-06-13 21:10:14 +01:00
counter	iio: pc104: Mask PC/104 drivers via the PC104 Kconfig option	2017-03-15 21:59:08 +00:00
dac	First set of new device support, features and cleanups for IIO in the 4.13 cycle	2017-05-29 15:53:42 +02:00
dummy	iio:dummy: Stop enabling timestamp by default.	2017-01-10 19:54:55 +00:00
frequency
gyro	Fourth set of IIO new device support, features and cleanups for the 4.12 cycle	2017-04-18 17:13:31 +02:00
health	First set of IIO new device support, features and cleanup for the 4.12 cycle.	2017-03-06 13:17:21 +01:00
humidity	iio: humidity: hts221: add power management support	2017-05-14 16:52:33 +01:00
imu	Second set of IIO new device support, features and cleanups for the 4.13 cycle.	2017-06-26 07:09:23 +02:00
light	Merge 4.12-rc5 into staging-next	2017-06-12 08:20:47 +02:00
magnetometer	iio: magnetometer: st_magn_spi: fix spi_device_id table	2017-06-11 15:07:40 +01:00
orientation	iio: hid-sensor-rotation: Add "scale" and "offset" properties parse support	2017-05-07 12:22:36 +01:00
potentiometer	iio: max5481: Add support for Maxim digital potentiometers	2017-01-28 12:13:31 +00:00
potentiostat	iio: lmp91000: Set parent device	2017-02-19 12:01:52 +00:00
pressure	iio: pressure: zpa2326: report interrupted case as failure	2017-05-14 15:28:14 +01:00
proximity	Second set of IIO new device support, features and cleanups for the 4.13 cycle.	2017-06-26 07:09:23 +02:00
temperature	iio: temperature: maxim_thermocouple: add MAX31856 part	2017-05-07 12:36:41 +01:00
trigger	iio: make stm32 trigger driver use INDIO_HARDWARE_TRIGGERED mode	2017-06-11 15:59:05 +01:00
iio_core_trigger.h
iio_core.h	iio:core: timestamping clock selection support	2016-06-30 19:41:38 +01:00
industrialio-buffer.c	sched/headers: Prepare to move signal wakeup & sigpending methods from <linux/sched.h> into <linux/sched/signal.h>	2017-03-02 08:42:32 +01:00
industrialio-configfs.c
industrialio-core.c	iio: add hardware triggered operating mode	2017-06-11 15:58:41 +01:00
industrialio-event.c	iio: iio_push_event(): Don't crash if the event interface is not registered	2016-09-10 16:40:44 +01:00
industrialio-sw-device.c	iio: Add support for creating IIO devices via configfs	2016-05-04 11:43:54 +01:00
industrialio-sw-trigger.c
industrialio-trigger.c	iio: trigger: fix NULL pointer dereference in iio_trigger_write_current()	2017-05-21 12:36:59 +01:00
industrialio-triggered-event.c
inkern.c	iio: inkern: fix a static checker error	2017-04-26 06:04:06 +01:00
Kconfig	iio: 104-quad-8: Add IIO support for the ACCES 104-QUAD-8	2016-10-01 17:06:21 +01:00
Makefile	iio: 104-quad-8: Add IIO support for the ACCES 104-QUAD-8	2016-10-01 17:06:21 +01:00