2
0
mirror of https://github.com/edk2-porting/linux-next.git synced 2024-12-22 20:23:57 +08:00
linux-next/Documentation/devicetree/bindings/regulator/pv88090.txt
James Ban c90456e36d regulator: pv88090: new regulator driver
This is the driver for the Powerventure PV88090 BUCKs and LDOs regulator.
It communicates via an I2C bus to the device.

Signed-off-by: James Ban <James.Ban.opensource@diasemi.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2015-12-08 18:21:06 +00:00

66 lines
1.7 KiB
Plaintext

* Powerventure Semiconductor PV88090 Voltage Regulator
Required properties:
- compatible: "pvs,pv88090".
- reg: I2C slave address, usually 0x48.
- interrupts: the interrupt outputs of the controller
- regulators: A node that houses a sub-node for each regulator within the
device. Each sub-node is identified using the node's name, with valid
values listed below. The content of each sub-node is defined by the
standard binding for regulators; see regulator.txt.
BUCK1, BUCK2, BUCK3, LDO1, and LDO2.
Optional properties:
- Any optional property defined in regulator.txt
Example
pmic: pv88090@48 {
compatible = "pvs,pv88090";
reg = <0x48>;
interrupt-parent = <&gpio>;
interrupts = <24 24>;
regulators {
BUCK1 {
regulator-name = "buck1";
regulator-min-microvolt = < 600000>;
regulator-max-microvolt = <1393750>;
regulator-min-microamp = < 220000>;
regulator-max-microamp = <7040000>;
regulator-boot-on;
};
BUCK2 {
regulator-name = "buck2";
regulator-min-microvolt = < 600000>;
regulator-max-microvolt = <1393750>;
regulator-min-microamp = <1496000>;
regulator-max-microamp = <4189000>;
};
BUCK3 {
regulator-name = "buck3";
regulator-min-microvolt = <600000>;
regulator-max-microvolt = <1393750>;
regulator-min-microamp = <1496000>;
regulator-max-microamp = <4189000>;
regulator-boot-on;
};
LDO1 {
regulator-name = "ldo1";
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <4350000>;
regulator-boot-on;
};
LDO2 {
regulator-name = "ldo2";
regulator-min-microvolt = < 650000>;
regulator-max-microvolt = <2225000>;
regulator-boot-on;
};
};
};