mirror of
https://github.com/edk2-porting/linux-next.git
synced 2024-12-22 20:23:57 +08:00
9f6c20981e
This patch is to add compatible into eSDHC required properties. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
53 lines
1.7 KiB
Plaintext
53 lines
1.7 KiB
Plaintext
* Freescale Enhanced Secure Digital Host Controller (eSDHC)
|
|
|
|
The Enhanced Secure Digital Host Controller provides an interface
|
|
for MMC, SD, and SDIO types of memory cards.
|
|
|
|
This file documents differences between the core properties described
|
|
by mmc.txt and the properties used by the sdhci-esdhc driver.
|
|
|
|
Required properties:
|
|
- compatible : should be "fsl,esdhc", or "fsl,<chip>-esdhc".
|
|
Possible compatibles for PowerPC:
|
|
"fsl,mpc8536-esdhc"
|
|
"fsl,mpc8378-esdhc"
|
|
"fsl,p2020-esdhc"
|
|
"fsl,p4080-esdhc"
|
|
"fsl,t1040-esdhc"
|
|
"fsl,t4240-esdhc"
|
|
Possible compatibles for ARM:
|
|
"fsl,ls1012a-esdhc"
|
|
"fsl,ls1088a-esdhc"
|
|
"fsl,ls1043a-esdhc"
|
|
"fsl,ls1046a-esdhc"
|
|
"fsl,ls2080a-esdhc"
|
|
- interrupt-parent : interrupt source phandle.
|
|
- clock-frequency : specifies eSDHC base clock frequency.
|
|
|
|
Optional properties:
|
|
- sdhci,wp-inverted : specifies that eSDHC controller reports
|
|
inverted write-protect state; New devices should use the generic
|
|
"wp-inverted" property.
|
|
- sdhci,1-bit-only : specifies that a controller can only handle
|
|
1-bit data transfers. New devices should use the generic
|
|
"bus-width = <1>" property.
|
|
- sdhci,auto-cmd12: specifies that a controller can only handle auto
|
|
CMD12.
|
|
- voltage-ranges : two cells are required, first cell specifies minimum
|
|
slot voltage (mV), second cell specifies maximum slot voltage (mV).
|
|
Several ranges could be specified.
|
|
- little-endian : If the host controller is little-endian mode, specify
|
|
this property. The default endian mode is big-endian.
|
|
|
|
Example:
|
|
|
|
sdhci@2e000 {
|
|
compatible = "fsl,mpc8378-esdhc", "fsl,esdhc";
|
|
reg = <0x2e000 0x1000>;
|
|
interrupts = <42 0x8>;
|
|
interrupt-parent = <&ipic>;
|
|
/* Filled in by U-Boot */
|
|
clock-frequency = <0>;
|
|
voltage-ranges = <3300 3300>;
|
|
};
|