2
0
mirror of https://github.com/edk2-porting/linux-next.git synced 2024-12-25 05:34:00 +08:00
linux-next/drivers/dma/sh/shdma-r8a73a4.c
Geert Uytterhoeven 8f64b27670 dmaengine: shdma: r8a73a4: Make dma_ts_shift[] static
dma_ts_shift[] isn't used outside this source file. All other users use
the definition from arch/arm/mach-shmobile/dma-register.h.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Simon Horman <horms+renesas@verge.net.au>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2015-05-25 22:33:07 +05:30

78 lines
2.0 KiB
C

/*
* Renesas SuperH DMA Engine support for r8a73a4 (APE6) SoCs
*
* Copyright (C) 2013 Renesas Electronics, Inc.
*
* This is free software; you can redistribute it and/or modify it under the
* terms of version 2 the GNU General Public License as published by the Free
* Software Foundation.
*/
#include <linux/sh_dma.h>
#include "shdma-arm.h"
static const unsigned int dma_ts_shift[] = SH_DMAE_TS_SHIFT;
static const struct sh_dmae_slave_config dma_slaves[] = {
{
.chcr = CHCR_TX(XMIT_SZ_32BIT),
.mid_rid = 0xd1, /* MMC0 Tx */
}, {
.chcr = CHCR_RX(XMIT_SZ_32BIT),
.mid_rid = 0xd2, /* MMC0 Rx */
}, {
.chcr = CHCR_TX(XMIT_SZ_32BIT),
.mid_rid = 0xe1, /* MMC1 Tx */
}, {
.chcr = CHCR_RX(XMIT_SZ_32BIT),
.mid_rid = 0xe2, /* MMC1 Rx */
},
};
#define DMAE_CHANNEL(a, b) \
{ \
.offset = (a) - 0x20, \
.dmars = (a) - 0x20 + 0x40, \
.chclr_bit = (b), \
.chclr_offset = 0x80 - 0x20, \
}
static const struct sh_dmae_channel dma_channels[] = {
DMAE_CHANNEL(0x8000, 0),
DMAE_CHANNEL(0x8080, 1),
DMAE_CHANNEL(0x8100, 2),
DMAE_CHANNEL(0x8180, 3),
DMAE_CHANNEL(0x8200, 4),
DMAE_CHANNEL(0x8280, 5),
DMAE_CHANNEL(0x8300, 6),
DMAE_CHANNEL(0x8380, 7),
DMAE_CHANNEL(0x8400, 8),
DMAE_CHANNEL(0x8480, 9),
DMAE_CHANNEL(0x8500, 10),
DMAE_CHANNEL(0x8580, 11),
DMAE_CHANNEL(0x8600, 12),
DMAE_CHANNEL(0x8680, 13),
DMAE_CHANNEL(0x8700, 14),
DMAE_CHANNEL(0x8780, 15),
DMAE_CHANNEL(0x8800, 16),
DMAE_CHANNEL(0x8880, 17),
DMAE_CHANNEL(0x8900, 18),
DMAE_CHANNEL(0x8980, 19),
};
const struct sh_dmae_pdata r8a73a4_dma_pdata = {
.slave = dma_slaves,
.slave_num = ARRAY_SIZE(dma_slaves),
.channel = dma_channels,
.channel_num = ARRAY_SIZE(dma_channels),
.ts_low_shift = TS_LOW_SHIFT,
.ts_low_mask = TS_LOW_BIT << TS_LOW_SHIFT,
.ts_high_shift = TS_HI_SHIFT,
.ts_high_mask = TS_HI_BIT << TS_HI_SHIFT,
.ts_shift = dma_ts_shift,
.ts_shift_num = ARRAY_SIZE(dma_ts_shift),
.dmaor_init = DMAOR_DME,
.chclr_present = 1,
.chclr_bitwise = 1,
};