renegade-project/linux-next
2
0
Fork 0
mirror of https://github.com/edk2-porting/linux-next.git synced 2024-12-29 15:43:59 +08:00
Code
174e23810c
linux-next/arch/alpha/kernel/sys_dp264.c
Linus Torvalds ead751507d License cleanup: add SPDX license identifiers to some files 
Many source files in the tree are missing licensing information, which
 makes it harder for compliance tools to determine the correct license.
 
 By default all files without license information are under the default
 license of the kernel, which is GPL version 2.
 
 Update the files which contain no license information with the 'GPL-2.0'
 SPDX license identifier.  The SPDX identifier is a legally binding
 shorthand, which can be used instead of the full boiler plate text.
 
 This patch is based on work done by Thomas Gleixner and Kate Stewart and
 Philippe Ombredanne.
 
 How this work was done:
 
 Patches were generated and checked against linux-4.14-rc6 for a subset of
 the use cases:
  - file had no licensing information it it.
  - file was a */uapi/* one with no licensing information in it,
  - file was a */uapi/* one with existing licensing information,
 
 Further patches will be generated in subsequent months to fix up cases
 where non-standard license headers were used, and references to license
 had to be inferred by heuristics based on keywords.
 
 The analysis to determine which SPDX License Identifier to be applied to
 a file was done in a spreadsheet of side by side results from of the
 output of two independent scanners (ScanCode & Windriver) producing SPDX
 tag:value files created by Philippe Ombredanne.  Philippe prepared the
 base worksheet, and did an initial spot review of a few 1000 files.
 
 The 4.13 kernel was the starting point of the analysis with 60,537 files
 assessed.  Kate Stewart did a file by file comparison of the scanner
 results in the spreadsheet to determine which SPDX license identifier(s)
 to be applied to the file. She confirmed any determination that was not
 immediately clear with lawyers working with the Linux Foundation.
 
 Criteria used to select files for SPDX license identifier tagging was:
  - Files considered eligible had to be source code files.
  - Make and config files were included as candidates if they contained >5
    lines of source
  - File already had some variant of a license header in it (even if <5
    lines).
 
 All documentation files were explicitly excluded.
 
 The following heuristics were used to determine which SPDX license
 identifiers to apply.
 
  - when both scanners couldn't find any license traces, file was
    considered to have no license information in it, and the top level
    COPYING file license applied.
 
    For non */uapi/* files that summary was:
 
    SPDX license identifier                            # files
    ---------------------------------------------------|-------
    GPL-2.0                                              11139
 
    and resulted in the first patch in this series.
 
    If that file was a */uapi/* path one, it was "GPL-2.0 WITH
    Linux-syscall-note" otherwise it was "GPL-2.0".  Results of that was:
 
    SPDX license identifier                            # files
    ---------------------------------------------------|-------
    GPL-2.0 WITH Linux-syscall-note                        930
 
    and resulted in the second patch in this series.
 
  - if a file had some form of licensing information in it, and was one
    of the */uapi/* ones, it was denoted with the Linux-syscall-note if
    any GPL family license was found in the file or had no licensing in
    it (per prior point).  Results summary:
 
    SPDX license identifier                            # files
    ---------------------------------------------------|------
    GPL-2.0 WITH Linux-syscall-note                       270
    GPL-2.0+ WITH Linux-syscall-note                      169
    ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause)    21
    ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause)    17
    LGPL-2.1+ WITH Linux-syscall-note                      15
    GPL-1.0+ WITH Linux-syscall-note                       14
    ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause)    5
    LGPL-2.0+ WITH Linux-syscall-note                       4
    LGPL-2.1 WITH Linux-syscall-note                        3
    ((GPL-2.0 WITH Linux-syscall-note) OR MIT)              3
    ((GPL-2.0 WITH Linux-syscall-note) AND MIT)             1
 
    and that resulted in the third patch in this series.
 
  - when the two scanners agreed on the detected license(s), that became
    the concluded license(s).
 
  - when there was disagreement between the two scanners (one detected a
    license but the other didn't, or they both detected different
    licenses) a manual inspection of the file occurred.
 
  - In most cases a manual inspection of the information in the file
    resulted in a clear resolution of the license that should apply (and
    which scanner probably needed to revisit its heuristics).
 
  - When it was not immediately clear, the license identifier was
    confirmed with lawyers working with the Linux Foundation.
 
  - If there was any question as to the appropriate license identifier,
    the file was flagged for further research and to be revisited later
    in time.
 
 In total, over 70 hours of logged manual review was done on the
 spreadsheet to determine the SPDX license identifiers to apply to the
 source files by Kate, Philippe, Thomas and, in some cases, confirmation
 by lawyers working with the Linux Foundation.
 
 Kate also obtained a third independent scan of the 4.13 code base from
 FOSSology, and compared selected files where the other two scanners
 disagreed against that SPDX file, to see if there was new insights.  The
 Windriver scanner is based on an older version of FOSSology in part, so
 they are related.
 
 Thomas did random spot checks in about 500 files from the spreadsheets
 for the uapi headers and agreed with SPDX license identifier in the
 files he inspected. For the non-uapi files Thomas did random spot checks
 in about 15000 files.
 
 In initial set of patches against 4.14-rc6, 3 files were found to have
 copy/paste license identifier errors, and have been fixed to reflect the
 correct identifier.
 
 Additionally Philippe spent 10 hours this week doing a detailed manual
 inspection and review of the 12,461 patched files from the initial patch
 version early this week with:
  - a full scancode scan run, collecting the matched texts, detected
    license ids and scores
  - reviewing anything where there was a license detected (about 500+
    files) to ensure that the applied SPDX license was correct
  - reviewing anything where there was no detection but the patch license
    was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied
    SPDX license was correct
 
 This produced a worksheet with 20 files needing minor correction.  This
 worksheet was then exported into 3 different .csv files for the
 different types of files to be modified.
 
 These .csv files were then reviewed by Greg.  Thomas wrote a script to
 parse the csv files and add the proper SPDX tag to the file, in the
 format that the file expected.  This script was further refined by Greg
 based on the output to detect more types of files automatically and to
 distinguish between header and source .c files (which need different
 comment types.)  Finally Greg ran the script using the .csv files to
 generate the patches.
 
 Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
 Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com>
 Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
 Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 -----BEGIN PGP SIGNATURE-----
 
 iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCWfswbQ8cZ3JlZ0Brcm9h
 aC5jb20ACgkQMUfUDdst+ykvEwCfXU1MuYFQGgMdDmAZXEc+xFXZvqgAoKEcHDNA
 6dVh26uchcEQLN/XqUDt
 =x306
 -----END PGP SIGNATURE-----

Merge tag 'spdx_identifiers-4.14-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core

Pull initial SPDX identifiers from Greg KH:
 "License cleanup: add SPDX license identifiers to some files

  Many source files in the tree are missing licensing information, which
  makes it harder for compliance tools to determine the correct license.

  By default all files without license information are under the default
  license of the kernel, which is GPL version 2.

  Update the files which contain no license information with the
  'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally
  binding shorthand, which can be used instead of the full boiler plate
  text.

  This patch is based on work done by Thomas Gleixner and Kate Stewart
  and Philippe Ombredanne.

  How this work was done:

  Patches were generated and checked against linux-4.14-rc6 for a subset
  of the use cases:

   - file had no licensing information it it.

   - file was a */uapi/* one with no licensing information in it,

   - file was a */uapi/* one with existing licensing information,

  Further patches will be generated in subsequent months to fix up cases
  where non-standard license headers were used, and references to
  license had to be inferred by heuristics based on keywords.

  The analysis to determine which SPDX License Identifier to be applied
  to a file was done in a spreadsheet of side by side results from of
  the output of two independent scanners (ScanCode & Windriver)
  producing SPDX tag:value files created by Philippe Ombredanne.
  Philippe prepared the base worksheet, and did an initial spot review
  of a few 1000 files.

  The 4.13 kernel was the starting point of the analysis with 60,537
  files assessed. Kate Stewart did a file by file comparison of the
  scanner results in the spreadsheet to determine which SPDX license
  identifier(s) to be applied to the file. She confirmed any
  determination that was not immediately clear with lawyers working with
  the Linux Foundation.

  Criteria used to select files for SPDX license identifier tagging was:

   - Files considered eligible had to be source code files.

   - Make and config files were included as candidates if they contained
     >5 lines of source

   - File already had some variant of a license header in it (even if <5
     lines).

  All documentation files were explicitly excluded.

  The following heuristics were used to determine which SPDX license
  identifiers to apply.

   - when both scanners couldn't find any license traces, file was
     considered to have no license information in it, and the top level
     COPYING file license applied.

     For non */uapi/* files that summary was:

       SPDX license identifier                            # files
       ---------------------------------------------------|-------
       GPL-2.0                                              11139

     and resulted in the first patch in this series.

     If that file was a */uapi/* path one, it was "GPL-2.0 WITH
     Linux-syscall-note" otherwise it was "GPL-2.0". Results of that
     was:

       SPDX license identifier                            # files
       ---------------------------------------------------|-------
       GPL-2.0 WITH Linux-syscall-note                        930

     and resulted in the second patch in this series.

   - if a file had some form of licensing information in it, and was one
     of the */uapi/* ones, it was denoted with the Linux-syscall-note if
     any GPL family license was found in the file or had no licensing in
     it (per prior point). Results summary:

       SPDX license identifier                            # files
       ---------------------------------------------------|------
       GPL-2.0 WITH Linux-syscall-note                       270
       GPL-2.0+ WITH Linux-syscall-note                      169
       ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause)    21
       ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause)    17
       LGPL-2.1+ WITH Linux-syscall-note                      15
       GPL-1.0+ WITH Linux-syscall-note                       14
       ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause)    5
       LGPL-2.0+ WITH Linux-syscall-note                       4
       LGPL-2.1 WITH Linux-syscall-note                        3
       ((GPL-2.0 WITH Linux-syscall-note) OR MIT)              3
       ((GPL-2.0 WITH Linux-syscall-note) AND MIT)             1

     and that resulted in the third patch in this series.

   - when the two scanners agreed on the detected license(s), that
     became the concluded license(s).

   - when there was disagreement between the two scanners (one detected
     a license but the other didn't, or they both detected different
     licenses) a manual inspection of the file occurred.

   - In most cases a manual inspection of the information in the file
     resulted in a clear resolution of the license that should apply
     (and which scanner probably needed to revisit its heuristics).

   - When it was not immediately clear, the license identifier was
     confirmed with lawyers working with the Linux Foundation.

   - If there was any question as to the appropriate license identifier,
     the file was flagged for further research and to be revisited later
     in time.

  In total, over 70 hours of logged manual review was done on the
  spreadsheet to determine the SPDX license identifiers to apply to the
  source files by Kate, Philippe, Thomas and, in some cases,
  confirmation by lawyers working with the Linux Foundation.

  Kate also obtained a third independent scan of the 4.13 code base from
  FOSSology, and compared selected files where the other two scanners
  disagreed against that SPDX file, to see if there was new insights.
  The Windriver scanner is based on an older version of FOSSology in
  part, so they are related.

  Thomas did random spot checks in about 500 files from the spreadsheets
  for the uapi headers and agreed with SPDX license identifier in the
  files he inspected. For the non-uapi files Thomas did random spot
  checks in about 15000 files.

  In initial set of patches against 4.14-rc6, 3 files were found to have
  copy/paste license identifier errors, and have been fixed to reflect
  the correct identifier.

  Additionally Philippe spent 10 hours this week doing a detailed manual
  inspection and review of the 12,461 patched files from the initial
  patch version early this week with:

   - a full scancode scan run, collecting the matched texts, detected
     license ids and scores

   - reviewing anything where there was a license detected (about 500+
     files) to ensure that the applied SPDX license was correct

   - reviewing anything where there was no detection but the patch
     license was not GPL-2.0 WITH Linux-syscall-note to ensure that the
     applied SPDX license was correct

  This produced a worksheet with 20 files needing minor correction. This
  worksheet was then exported into 3 different .csv files for the
  different types of files to be modified.

  These .csv files were then reviewed by Greg. Thomas wrote a script to
  parse the csv files and add the proper SPDX tag to the file, in the
  format that the file expected. This script was further refined by Greg
  based on the output to detect more types of files automatically and to
  distinguish between header and source .c files (which need different
  comment types.) Finally Greg ran the script using the .csv files to
  generate the patches.

  Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
  Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com>
  Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
  Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>"

* tag 'spdx_identifiers-4.14-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core:
  License cleanup: add SPDX license identifier to uapi header files with a license
  License cleanup: add SPDX license identifier to uapi header files with no license
  License cleanup: add SPDX GPL-2.0 license identifier to files with no license
2017-11-02 10:04:46 -07:00

667 lines
17 KiB
C
Raw Blame History

// SPDX-License-Identifier: GPL-2.0
/*
* linux/arch/alpha/kernel/sys_dp264.c
*
* Copyright (C) 1995 David A Rusling
* Copyright (C) 1996, 1999 Jay A Estabrook
* Copyright (C) 1998, 1999 Richard Henderson
*
* Modified by Christopher C. Chimelis, 2001 to
* add support for the addition of Shark to the
* Tsunami family.
*
* Code supporting the DP264 (EV6+TSUNAMI).
*/
#include <linux/kernel.h>
#include <linux/types.h>
#include <linux/mm.h>
#include <linux/sched.h>
#include <linux/pci.h>
#include <linux/init.h>
#include <linux/bitops.h>
#include <asm/ptrace.h>
#include <asm/dma.h>
#include <asm/irq.h>
#include <asm/mmu_context.h>
#include <asm/io.h>
#include <asm/pgtable.h>
#include <asm/core_tsunami.h>
#include <asm/hwrpb.h>
#include <asm/tlbflush.h>
#include "proto.h"
#include "irq_impl.h"
#include "pci_impl.h"
#include "machvec_impl.h"
/* Note mask bit is true for ENABLED irqs. */
static unsigned long cached_irq_mask;
/* dp264 boards handle at max four CPUs */
static unsigned long cpu_irq_affinity[4] = { 0UL, 0UL, 0UL, 0UL };
DEFINE_SPINLOCK(dp264_irq_lock);
static void
tsunami_update_irq_hw(unsigned long mask)
{
register tsunami_cchip *cchip = TSUNAMI_cchip;
unsigned long isa_enable = 1UL << 55;
register int bcpu = boot_cpuid;
#ifdef CONFIG_SMP
volatile unsigned long *dim0, *dim1, *dim2, *dim3;
unsigned long mask0, mask1, mask2, mask3, dummy;
mask &= ~isa_enable;
mask0 = mask & cpu_irq_affinity[0];
mask1 = mask & cpu_irq_affinity[1];
mask2 = mask & cpu_irq_affinity[2];
mask3 = mask & cpu_irq_affinity[3];
if (bcpu == 0) mask0 |= isa_enable;
else if (bcpu == 1) mask1 |= isa_enable;
else if (bcpu == 2) mask2 |= isa_enable;
else mask3 |= isa_enable;
dim0 = &cchip->dim0.csr;
dim1 = &cchip->dim1.csr;
dim2 = &cchip->dim2.csr;
dim3 = &cchip->dim3.csr;
if (!cpu_possible(0)) dim0 = &dummy;
if (!cpu_possible(1)) dim1 = &dummy;
if (!cpu_possible(2)) dim2 = &dummy;
if (!cpu_possible(3)) dim3 = &dummy;
*dim0 = mask0;
*dim1 = mask1;
*dim2 = mask2;
*dim3 = mask3;
mb();
*dim0;
*dim1;
*dim2;
*dim3;
#else
volatile unsigned long *dimB;
if (bcpu == 0) dimB = &cchip->dim0.csr;
else if (bcpu == 1) dimB = &cchip->dim1.csr;
else if (bcpu == 2) dimB = &cchip->dim2.csr;
else dimB = &cchip->dim3.csr;
*dimB = mask | isa_enable;
mb();
*dimB;
#endif
}
static void
dp264_enable_irq(struct irq_data *d)
{
spin_lock(&dp264_irq_lock);
cached_irq_mask |= 1UL << d->irq;
tsunami_update_irq_hw(cached_irq_mask);
spin_unlock(&dp264_irq_lock);
}
static void
dp264_disable_irq(struct irq_data *d)
{
spin_lock(&dp264_irq_lock);
cached_irq_mask &= ~(1UL << d->irq);
tsunami_update_irq_hw(cached_irq_mask);
spin_unlock(&dp264_irq_lock);
}
static void
clipper_enable_irq(struct irq_data *d)
{
spin_lock(&dp264_irq_lock);
cached_irq_mask |= 1UL << (d->irq - 16);
tsunami_update_irq_hw(cached_irq_mask);
spin_unlock(&dp264_irq_lock);
}
static void
clipper_disable_irq(struct irq_data *d)
{
spin_lock(&dp264_irq_lock);
cached_irq_mask &= ~(1UL << (d->irq - 16));
tsunami_update_irq_hw(cached_irq_mask);
spin_unlock(&dp264_irq_lock);
}
static void
cpu_set_irq_affinity(unsigned int irq, cpumask_t affinity)
{
int cpu;
for (cpu = 0; cpu < 4; cpu++) {
unsigned long aff = cpu_irq_affinity[cpu];
if (cpumask_test_cpu(cpu, &affinity))
aff |= 1UL << irq;
else
aff &= ~(1UL << irq);
cpu_irq_affinity[cpu] = aff;
}
}
static int
dp264_set_affinity(struct irq_data *d, const struct cpumask *affinity,
bool force)
{
spin_lock(&dp264_irq_lock);
cpu_set_irq_affinity(d->irq, *affinity);
tsunami_update_irq_hw(cached_irq_mask);
spin_unlock(&dp264_irq_lock);
return 0;
}
static int
clipper_set_affinity(struct irq_data *d, const struct cpumask *affinity,
bool force)
{
spin_lock(&dp264_irq_lock);
cpu_set_irq_affinity(d->irq - 16, *affinity);
tsunami_update_irq_hw(cached_irq_mask);
spin_unlock(&dp264_irq_lock);
return 0;
}
static struct irq_chip dp264_irq_type = {
.name = "DP264",
.irq_unmask = dp264_enable_irq,
.irq_mask = dp264_disable_irq,
.irq_mask_ack = dp264_disable_irq,
.irq_set_affinity = dp264_set_affinity,
};
static struct irq_chip clipper_irq_type = {
.name = "CLIPPER",
.irq_unmask = clipper_enable_irq,
.irq_mask = clipper_disable_irq,
.irq_mask_ack = clipper_disable_irq,
.irq_set_affinity = clipper_set_affinity,
};
static void
dp264_device_interrupt(unsigned long vector)
{
unsigned long pld;
unsigned int i;
/* Read the interrupt summary register of TSUNAMI */
pld = TSUNAMI_cchip->dir0.csr;
/*
* Now for every possible bit set, work through them and call
* the appropriate interrupt handler.
*/
while (pld) {
i = ffz(~pld);
pld &= pld - 1; /* clear least bit set */
if (i == 55)
isa_device_interrupt(vector);
else
handle_irq(16 + i);
}
}
static void
dp264_srm_device_interrupt(unsigned long vector)
{
int irq;
irq = (vector - 0x800) >> 4;
/*
* The SRM console reports PCI interrupts with a vector calculated by:
*
* 0x900 + (0x10 * DRIR-bit)
*
* So bit 16 shows up as IRQ 32, etc.
*
* On DP264/BRICK/MONET, we adjust it down by 16 because at least
* that many of the low order bits of the DRIR are not used, and
* so we don't count them.
*/
if (irq >= 32)
irq -= 16;
handle_irq(irq);
}
static void
clipper_srm_device_interrupt(unsigned long vector)
{
int irq;
irq = (vector - 0x800) >> 4;
/*
* The SRM console reports PCI interrupts with a vector calculated by:
*
* 0x900 + (0x10 * DRIR-bit)
*
* So bit 16 shows up as IRQ 32, etc.
*
* CLIPPER uses bits 8-47 for PCI interrupts, so we do not need
* to scale down the vector reported, we just use it.
*
* Eg IRQ 24 is DRIR bit 8, etc, etc
*/
handle_irq(irq);
}
static void __init
init_tsunami_irqs(struct irq_chip * ops, int imin, int imax)
{
long i;
for (i = imin; i <= imax; ++i) {
irq_set_chip_and_handler(i, ops, handle_level_irq);
irq_set_status_flags(i, IRQ_LEVEL);
}
}
static void __init
dp264_init_irq(void)
{
outb(0, DMA1_RESET_REG);
outb(0, DMA2_RESET_REG);
outb(DMA_MODE_CASCADE, DMA2_MODE_REG);
outb(0, DMA2_MASK_REG);
if (alpha_using_srm)
alpha_mv.device_interrupt = dp264_srm_device_interrupt;
tsunami_update_irq_hw(0);
init_i8259a_irqs();
init_tsunami_irqs(&dp264_irq_type, 16, 47);
}
static void __init
clipper_init_irq(void)
{
outb(0, DMA1_RESET_REG);
outb(0, DMA2_RESET_REG);
outb(DMA_MODE_CASCADE, DMA2_MODE_REG);
outb(0, DMA2_MASK_REG);
if (alpha_using_srm)
alpha_mv.device_interrupt = clipper_srm_device_interrupt;
tsunami_update_irq_hw(0);
init_i8259a_irqs();
init_tsunami_irqs(&clipper_irq_type, 24, 63);
}
/*
* PCI Fixup configuration.
*
* Summary @ TSUNAMI_CSR_DIM0:
* Bit Meaning
* 0-17 Unused
*18 Interrupt SCSI B (Adaptec 7895 builtin)
*19 Interrupt SCSI A (Adaptec 7895 builtin)
*20 Interrupt Line D from slot 2 PCI0
*21 Interrupt Line C from slot 2 PCI0
*22 Interrupt Line B from slot 2 PCI0
*23 Interrupt Line A from slot 2 PCI0
*24 Interrupt Line D from slot 1 PCI0
*25 Interrupt Line C from slot 1 PCI0
*26 Interrupt Line B from slot 1 PCI0
*27 Interrupt Line A from slot 1 PCI0
*28 Interrupt Line D from slot 0 PCI0
*29 Interrupt Line C from slot 0 PCI0
*30 Interrupt Line B from slot 0 PCI0
*31 Interrupt Line A from slot 0 PCI0
*
*32 Interrupt Line D from slot 3 PCI1
*33 Interrupt Line C from slot 3 PCI1
*34 Interrupt Line B from slot 3 PCI1
*35 Interrupt Line A from slot 3 PCI1
*36 Interrupt Line D from slot 2 PCI1
*37 Interrupt Line C from slot 2 PCI1
*38 Interrupt Line B from slot 2 PCI1
*39 Interrupt Line A from slot 2 PCI1
*40 Interrupt Line D from slot 1 PCI1
*41 Interrupt Line C from slot 1 PCI1
*42 Interrupt Line B from slot 1 PCI1
*43 Interrupt Line A from slot 1 PCI1
*44 Interrupt Line D from slot 0 PCI1
*45 Interrupt Line C from slot 0 PCI1
*46 Interrupt Line B from slot 0 PCI1
*47 Interrupt Line A from slot 0 PCI1
*48-52 Unused
*53 PCI0 NMI (from Cypress)
*54 PCI0 SMI INT (from Cypress)
*55 PCI0 ISA Interrupt (from Cypress)
*56-60 Unused
*61 PCI1 Bus Error
*62 PCI0 Bus Error
*63 Reserved
*
* IdSel
* 5 Cypress Bridge I/O
* 6 SCSI Adaptec builtin
* 7 64 bit PCI option slot 0 (all busses)
* 8 64 bit PCI option slot 1 (all busses)
* 9 64 bit PCI option slot 2 (all busses)
* 10 64 bit PCI option slot 3 (not bus 0)
*/
static int
isa_irq_fixup(const struct pci_dev *dev, int irq)
{
u8 irq8;
if (irq > 0)
return irq;
/* This interrupt is routed via ISA bridge, so we'll
just have to trust whatever value the console might
have assigned. */
pci_read_config_byte(dev, PCI_INTERRUPT_LINE, &irq8);
return irq8 & 0xf;
}
static int
dp264_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
{
static char irq_tab[6][5] = {
/*INT INTA INTB INTC INTD */
{ -1, -1, -1, -1, -1}, /* IdSel 5 ISA Bridge */
{ 16+ 3, 16+ 3, 16+ 2, 16+ 2, 16+ 2}, /* IdSel 6 SCSI builtin*/
{ 16+15, 16+15, 16+14, 16+13, 16+12}, /* IdSel 7 slot 0 */
{ 16+11, 16+11, 16+10, 16+ 9, 16+ 8}, /* IdSel 8 slot 1 */
{ 16+ 7, 16+ 7, 16+ 6, 16+ 5, 16+ 4}, /* IdSel 9 slot 2 */
{ 16+ 3, 16+ 3, 16+ 2, 16+ 1, 16+ 0} /* IdSel 10 slot 3 */
};
const long min_idsel = 5, max_idsel = 10, irqs_per_slot = 5;
struct pci_controller *hose = dev->sysdata;
int irq = COMMON_TABLE_LOOKUP;
if (irq > 0)
irq += 16 * hose->index;
return isa_irq_fixup(dev, irq);
}
static int
monet_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
{
static char irq_tab[13][5] = {
/*INT INTA INTB INTC INTD */
{ 45, 45, 45, 45, 45}, /* IdSel 3 21143 PCI1 */
{ -1, -1, -1, -1, -1}, /* IdSel 4 unused */
{ -1, -1, -1, -1, -1}, /* IdSel 5 unused */
{ 47, 47, 47, 47, 47}, /* IdSel 6 SCSI PCI1 */
{ -1, -1, -1, -1, -1}, /* IdSel 7 ISA Bridge */
{ -1, -1, -1, -1, -1}, /* IdSel 8 P2P PCI1 */
#if 1
{ 28, 28, 29, 30, 31}, /* IdSel 14 slot 4 PCI2*/
{ 24, 24, 25, 26, 27}, /* IdSel 15 slot 5 PCI2*/
#else
{ -1, -1, -1, -1, -1}, /* IdSel 9 unused */
{ -1, -1, -1, -1, -1}, /* IdSel 10 unused */
#endif
{ 40, 40, 41, 42, 43}, /* IdSel 11 slot 1 PCI0*/
{ 36, 36, 37, 38, 39}, /* IdSel 12 slot 2 PCI0*/
{ 32, 32, 33, 34, 35}, /* IdSel 13 slot 3 PCI0*/
{ 28, 28, 29, 30, 31}, /* IdSel 14 slot 4 PCI2*/
{ 24, 24, 25, 26, 27} /* IdSel 15 slot 5 PCI2*/
};
const long min_idsel = 3, max_idsel = 15, irqs_per_slot = 5;
return isa_irq_fixup(dev, COMMON_TABLE_LOOKUP);
}
static u8
monet_swizzle(struct pci_dev *dev, u8 *pinp)
{
struct pci_controller *hose = dev->sysdata;
int slot, pin = *pinp;
if (!dev->bus->parent) {
slot = PCI_SLOT(dev->devfn);
}
/* Check for the built-in bridge on hose 1. */
else if (hose->index == 1 && PCI_SLOT(dev->bus->self->devfn) == 8) {
slot = PCI_SLOT(dev->devfn);
} else {
/* Must be a card-based bridge. */
do {
/* Check for built-in bridge on hose 1. */
if (hose->index == 1 &&
PCI_SLOT(dev->bus->self->devfn) == 8) {
slot = PCI_SLOT(dev->devfn);
break;
}
pin = pci_swizzle_interrupt_pin(dev, pin);
/* Move up the chain of bridges. */
dev = dev->bus->self;
/* Slot of the next bridge. */
slot = PCI_SLOT(dev->devfn);
} while (dev->bus->self);
}
*pinp = pin;
return slot;
}
static int
webbrick_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
{
static char irq_tab[13][5] = {
/*INT INTA INTB INTC INTD */
{ -1, -1, -1, -1, -1}, /* IdSel 7 ISA Bridge */
{ -1, -1, -1, -1, -1}, /* IdSel 8 unused */
{ 29, 29, 29, 29, 29}, /* IdSel 9 21143 #1 */
{ -1, -1, -1, -1, -1}, /* IdSel 10 unused */
{ 30, 30, 30, 30, 30}, /* IdSel 11 21143 #2 */
{ -1, -1, -1, -1, -1}, /* IdSel 12 unused */
{ -1, -1, -1, -1, -1}, /* IdSel 13 unused */
{ 35, 35, 34, 33, 32}, /* IdSel 14 slot 0 */
{ 39, 39, 38, 37, 36}, /* IdSel 15 slot 1 */
{ 43, 43, 42, 41, 40}, /* IdSel 16 slot 2 */
{ 47, 47, 46, 45, 44}, /* IdSel 17 slot 3 */
};
const long min_idsel = 7, max_idsel = 17, irqs_per_slot = 5;
return isa_irq_fixup(dev, COMMON_TABLE_LOOKUP);
}
static int
clipper_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
{
static char irq_tab[7][5] = {
/*INT INTA INTB INTC INTD */
{ 16+ 8, 16+ 8, 16+ 9, 16+10, 16+11}, /* IdSel 1 slot 1 */
{ 16+12, 16+12, 16+13, 16+14, 16+15}, /* IdSel 2 slot 2 */
{ 16+16, 16+16, 16+17, 16+18, 16+19}, /* IdSel 3 slot 3 */
{ 16+20, 16+20, 16+21, 16+22, 16+23}, /* IdSel 4 slot 4 */
{ 16+24, 16+24, 16+25, 16+26, 16+27}, /* IdSel 5 slot 5 */
{ 16+28, 16+28, 16+29, 16+30, 16+31}, /* IdSel 6 slot 6 */
{ -1, -1, -1, -1, -1} /* IdSel 7 ISA Bridge */
};
const long min_idsel = 1, max_idsel = 7, irqs_per_slot = 5;
struct pci_controller *hose = dev->sysdata;
int irq = COMMON_TABLE_LOOKUP;
if (irq > 0)
irq += 16 * hose->index;
return isa_irq_fixup(dev, irq);
}
static void __init
dp264_init_pci(void)
{
common_init_pci();
SMC669_Init(0);
locate_and_init_vga(NULL);
}
static void __init
monet_init_pci(void)
{
common_init_pci();
SMC669_Init(1);
es1888_init();
locate_and_init_vga(NULL);
}
static void __init
clipper_init_pci(void)
{
common_init_pci();
locate_and_init_vga(NULL);
}
static void __init
webbrick_init_arch(void)
{
tsunami_init_arch();
/* Tsunami caches 4 PTEs at a time; DS10 has only 1 hose. */
hose_head->sg_isa->align_entry = 4;
hose_head->sg_pci->align_entry = 4;
}
/*
* The System Vectors
*/
struct alpha_machine_vector dp264_mv __initmv = {
.vector_name = "DP264",
DO_EV6_MMU,
DO_DEFAULT_RTC,
DO_TSUNAMI_IO,
.machine_check = tsunami_machine_check,
.max_isa_dma_address = ALPHA_MAX_ISA_DMA_ADDRESS,
.min_io_address = DEFAULT_IO_BASE,
.min_mem_address = DEFAULT_MEM_BASE,
.pci_dac_offset = TSUNAMI_DAC_OFFSET,
.nr_irqs = 64,
.device_interrupt = dp264_device_interrupt,
.init_arch = tsunami_init_arch,
.init_irq = dp264_init_irq,
.init_rtc = common_init_rtc,
.init_pci = dp264_init_pci,
.kill_arch = tsunami_kill_arch,
.pci_map_irq = dp264_map_irq,
.pci_swizzle = common_swizzle,
};
ALIAS_MV(dp264)
struct alpha_machine_vector monet_mv __initmv = {
.vector_name = "Monet",
DO_EV6_MMU,
DO_DEFAULT_RTC,
DO_TSUNAMI_IO,
.machine_check = tsunami_machine_check,
.max_isa_dma_address = ALPHA_MAX_ISA_DMA_ADDRESS,
.min_io_address = DEFAULT_IO_BASE,
.min_mem_address = DEFAULT_MEM_BASE,
.pci_dac_offset = TSUNAMI_DAC_OFFSET,
.nr_irqs = 64,
.device_interrupt = dp264_device_interrupt,
.init_arch = tsunami_init_arch,
.init_irq = dp264_init_irq,
.init_rtc = common_init_rtc,
.init_pci = monet_init_pci,
.kill_arch = tsunami_kill_arch,
.pci_map_irq = monet_map_irq,
.pci_swizzle = monet_swizzle,
};
struct alpha_machine_vector webbrick_mv __initmv = {
.vector_name = "Webbrick",
DO_EV6_MMU,
DO_DEFAULT_RTC,
DO_TSUNAMI_IO,
.machine_check = tsunami_machine_check,
.max_isa_dma_address = ALPHA_MAX_ISA_DMA_ADDRESS,
.min_io_address = DEFAULT_IO_BASE,
.min_mem_address = DEFAULT_MEM_BASE,
.pci_dac_offset = TSUNAMI_DAC_OFFSET,
.nr_irqs = 64,
.device_interrupt = dp264_device_interrupt,
.init_arch = webbrick_init_arch,
.init_irq = dp264_init_irq,
.init_rtc = common_init_rtc,
.init_pci = common_init_pci,
.kill_arch = tsunami_kill_arch,
.pci_map_irq = webbrick_map_irq,
.pci_swizzle = common_swizzle,
};
struct alpha_machine_vector clipper_mv __initmv = {
.vector_name = "Clipper",
DO_EV6_MMU,
DO_DEFAULT_RTC,
DO_TSUNAMI_IO,
.machine_check = tsunami_machine_check,
.max_isa_dma_address = ALPHA_MAX_ISA_DMA_ADDRESS,
.min_io_address = DEFAULT_IO_BASE,
.min_mem_address = DEFAULT_MEM_BASE,
.pci_dac_offset = TSUNAMI_DAC_OFFSET,
.nr_irqs = 64,
.device_interrupt = dp264_device_interrupt,
.init_arch = tsunami_init_arch,
.init_irq = clipper_init_irq,
.init_rtc = common_init_rtc,
.init_pci = clipper_init_pci,
.kill_arch = tsunami_kill_arch,
.pci_map_irq = clipper_map_irq,
.pci_swizzle = common_swizzle,
};
/* Sharks strongly resemble Clipper, at least as far
* as interrupt routing, etc, so we're using the
* same functions as Clipper does
*/
struct alpha_machine_vector shark_mv __initmv = {
.vector_name = "Shark",
DO_EV6_MMU,
DO_DEFAULT_RTC,
DO_TSUNAMI_IO,
.machine_check = tsunami_machine_check,
.max_isa_dma_address = ALPHA_MAX_ISA_DMA_ADDRESS,
.min_io_address = DEFAULT_IO_BASE,
.min_mem_address = DEFAULT_MEM_BASE,
.pci_dac_offset = TSUNAMI_DAC_OFFSET,
.nr_irqs = 64,
.device_interrupt = dp264_device_interrupt,
.init_arch = tsunami_init_arch,
.init_irq = clipper_init_irq,
.init_rtc = common_init_rtc,
.init_pci = common_init_pci,
.kill_arch = tsunami_kill_arch,
.pci_map_irq = clipper_map_irq,
.pci_swizzle = common_swizzle,
};
/* No alpha_mv alias for webbrick/monet/clipper, since we compile them
in unconditionally with DP264; setup_arch knows how to cope. */
View Git Blame Copy Permalink