mirror of
https://github.com/edk2-porting/linux-next.git
synced 2024-12-21 19:53:59 +08:00
5d1190ea69
This commit migrates the mach-orion5x platforms to use the mvebu-mbus driver and therefore removes the Orion5x-specific addr-map code. The dove_init_early() function now initializes the mvebu-mbus driver by calling mvebu_mbus_init(). We also convert a number of orion5x_setup_xyz_win() calls to the appropriate mvebu_mbus_add_window() calls, as each board was doing its own setup for the NOR window or other devices. Ultimately, those devices will be probed from the DT. The common address decoding windows are now registered in the orion5x_setup_wins() function. It is worth noting that the four PCIe address decoding windows will ultimately no longer have to be registered here: it will be done automatically by the PCIe driver once Dove has been migrated to use the upcoming mvebu PCIe driver. Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
364 lines
9.3 KiB
C
364 lines
9.3 KiB
C
/*
|
|
* arch/arm/mach-orion5x/d2net-setup.c
|
|
*
|
|
* LaCie d2Network and Big Disk Network NAS setup
|
|
*
|
|
* Copyright (C) 2009 Simon Guinot <sguinot@lacie.com>
|
|
*
|
|
* This file is licensed under the terms of the GNU General Public
|
|
* License version 2. This program is licensed "as is" without any
|
|
* warranty of any kind, whether express or implied.
|
|
*/
|
|
|
|
#include <linux/kernel.h>
|
|
#include <linux/init.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/pci.h>
|
|
#include <linux/irq.h>
|
|
#include <linux/mtd/physmap.h>
|
|
#include <linux/mv643xx_eth.h>
|
|
#include <linux/leds.h>
|
|
#include <linux/gpio_keys.h>
|
|
#include <linux/input.h>
|
|
#include <linux/i2c.h>
|
|
#include <linux/ata_platform.h>
|
|
#include <linux/gpio.h>
|
|
#include <asm/mach-types.h>
|
|
#include <asm/mach/arch.h>
|
|
#include <asm/mach/pci.h>
|
|
#include <mach/orion5x.h>
|
|
#include <plat/orion-gpio.h>
|
|
#include "common.h"
|
|
#include "mpp.h"
|
|
|
|
/*****************************************************************************
|
|
* LaCie d2 Network Info
|
|
****************************************************************************/
|
|
|
|
/*
|
|
* 512KB NOR flash Device bus boot chip select
|
|
*/
|
|
|
|
#define D2NET_NOR_BOOT_BASE 0xfff80000
|
|
#define D2NET_NOR_BOOT_SIZE SZ_512K
|
|
|
|
/*****************************************************************************
|
|
* 512KB NOR Flash on Boot Device
|
|
****************************************************************************/
|
|
|
|
/*
|
|
* TODO: Check write support on flash MX29LV400CBTC-70G
|
|
*/
|
|
|
|
static struct mtd_partition d2net_partitions[] = {
|
|
{
|
|
.name = "Full512kb",
|
|
.size = MTDPART_SIZ_FULL,
|
|
.offset = 0,
|
|
.mask_flags = MTD_WRITEABLE,
|
|
},
|
|
};
|
|
|
|
static struct physmap_flash_data d2net_nor_flash_data = {
|
|
.width = 1,
|
|
.parts = d2net_partitions,
|
|
.nr_parts = ARRAY_SIZE(d2net_partitions),
|
|
};
|
|
|
|
static struct resource d2net_nor_flash_resource = {
|
|
.flags = IORESOURCE_MEM,
|
|
.start = D2NET_NOR_BOOT_BASE,
|
|
.end = D2NET_NOR_BOOT_BASE
|
|
+ D2NET_NOR_BOOT_SIZE - 1,
|
|
};
|
|
|
|
static struct platform_device d2net_nor_flash = {
|
|
.name = "physmap-flash",
|
|
.id = 0,
|
|
.dev = {
|
|
.platform_data = &d2net_nor_flash_data,
|
|
},
|
|
.num_resources = 1,
|
|
.resource = &d2net_nor_flash_resource,
|
|
};
|
|
|
|
/*****************************************************************************
|
|
* Ethernet
|
|
****************************************************************************/
|
|
|
|
static struct mv643xx_eth_platform_data d2net_eth_data = {
|
|
.phy_addr = MV643XX_ETH_PHY_ADDR(8),
|
|
};
|
|
|
|
/*****************************************************************************
|
|
* I2C devices
|
|
****************************************************************************/
|
|
|
|
/*
|
|
* i2c addr | chip | description
|
|
* 0x32 | Ricoh 5C372b | RTC
|
|
* 0x3e | GMT G762 | PWM fan controller
|
|
* 0x50 | HT24LC08 | eeprom (1kB)
|
|
*
|
|
* TODO: Add G762 support to the g760a driver.
|
|
*/
|
|
static struct i2c_board_info __initdata d2net_i2c_devices[] = {
|
|
{
|
|
I2C_BOARD_INFO("rs5c372b", 0x32),
|
|
}, {
|
|
I2C_BOARD_INFO("24c08", 0x50),
|
|
},
|
|
};
|
|
|
|
/*****************************************************************************
|
|
* SATA
|
|
****************************************************************************/
|
|
|
|
static struct mv_sata_platform_data d2net_sata_data = {
|
|
.n_ports = 2,
|
|
};
|
|
|
|
#define D2NET_GPIO_SATA0_POWER 3
|
|
#define D2NET_GPIO_SATA1_POWER 12
|
|
|
|
static void __init d2net_sata_power_init(void)
|
|
{
|
|
int err;
|
|
|
|
err = gpio_request(D2NET_GPIO_SATA0_POWER, "SATA0 power");
|
|
if (err == 0) {
|
|
err = gpio_direction_output(D2NET_GPIO_SATA0_POWER, 1);
|
|
if (err)
|
|
gpio_free(D2NET_GPIO_SATA0_POWER);
|
|
}
|
|
if (err)
|
|
pr_err("d2net: failed to configure SATA0 power GPIO\n");
|
|
|
|
err = gpio_request(D2NET_GPIO_SATA1_POWER, "SATA1 power");
|
|
if (err == 0) {
|
|
err = gpio_direction_output(D2NET_GPIO_SATA1_POWER, 1);
|
|
if (err)
|
|
gpio_free(D2NET_GPIO_SATA1_POWER);
|
|
}
|
|
if (err)
|
|
pr_err("d2net: failed to configure SATA1 power GPIO\n");
|
|
}
|
|
|
|
/*****************************************************************************
|
|
* GPIO LED's
|
|
****************************************************************************/
|
|
|
|
/*
|
|
* The blue front LED is wired to the CPLD and can blink in relation with the
|
|
* SATA activity.
|
|
*
|
|
* The following array detail the different LED registers and the combination
|
|
* of their possible values:
|
|
*
|
|
* led_off | blink_ctrl | SATA active | LED state
|
|
* | | |
|
|
* 1 | x | x | off
|
|
* 0 | 0 | 0 | off
|
|
* 0 | 1 | 0 | blink (rate 300ms)
|
|
* 0 | x | 1 | on
|
|
*
|
|
* Notes: The blue and the red front LED's can't be on at the same time.
|
|
* Red LED have priority.
|
|
*/
|
|
|
|
#define D2NET_GPIO_RED_LED 6
|
|
#define D2NET_GPIO_BLUE_LED_BLINK_CTRL 16
|
|
#define D2NET_GPIO_BLUE_LED_OFF 23
|
|
|
|
static struct gpio_led d2net_leds[] = {
|
|
{
|
|
.name = "d2net:blue:sata",
|
|
.default_trigger = "default-on",
|
|
.gpio = D2NET_GPIO_BLUE_LED_OFF,
|
|
.active_low = 1,
|
|
},
|
|
{
|
|
.name = "d2net:red:fail",
|
|
.gpio = D2NET_GPIO_RED_LED,
|
|
},
|
|
};
|
|
|
|
static struct gpio_led_platform_data d2net_led_data = {
|
|
.num_leds = ARRAY_SIZE(d2net_leds),
|
|
.leds = d2net_leds,
|
|
};
|
|
|
|
static struct platform_device d2net_gpio_leds = {
|
|
.name = "leds-gpio",
|
|
.id = -1,
|
|
.dev = {
|
|
.platform_data = &d2net_led_data,
|
|
},
|
|
};
|
|
|
|
static void __init d2net_gpio_leds_init(void)
|
|
{
|
|
int err;
|
|
|
|
/* Configure GPIO over MPP max number. */
|
|
orion_gpio_set_valid(D2NET_GPIO_BLUE_LED_OFF, 1);
|
|
|
|
/* Configure register blink_ctrl to allow SATA activity LED blinking. */
|
|
err = gpio_request(D2NET_GPIO_BLUE_LED_BLINK_CTRL, "blue LED blink");
|
|
if (err == 0) {
|
|
err = gpio_direction_output(D2NET_GPIO_BLUE_LED_BLINK_CTRL, 1);
|
|
if (err)
|
|
gpio_free(D2NET_GPIO_BLUE_LED_BLINK_CTRL);
|
|
}
|
|
if (err)
|
|
pr_err("d2net: failed to configure blue LED blink GPIO\n");
|
|
|
|
platform_device_register(&d2net_gpio_leds);
|
|
}
|
|
|
|
/****************************************************************************
|
|
* GPIO keys
|
|
****************************************************************************/
|
|
|
|
#define D2NET_GPIO_PUSH_BUTTON 18
|
|
#define D2NET_GPIO_POWER_SWITCH_ON 8
|
|
#define D2NET_GPIO_POWER_SWITCH_OFF 9
|
|
|
|
#define D2NET_SWITCH_POWER_ON 0x1
|
|
#define D2NET_SWITCH_POWER_OFF 0x2
|
|
|
|
static struct gpio_keys_button d2net_buttons[] = {
|
|
{
|
|
.type = EV_SW,
|
|
.code = D2NET_SWITCH_POWER_OFF,
|
|
.gpio = D2NET_GPIO_POWER_SWITCH_OFF,
|
|
.desc = "Power rocker switch (auto|off)",
|
|
.active_low = 0,
|
|
},
|
|
{
|
|
.type = EV_SW,
|
|
.code = D2NET_SWITCH_POWER_ON,
|
|
.gpio = D2NET_GPIO_POWER_SWITCH_ON,
|
|
.desc = "Power rocker switch (on|auto)",
|
|
.active_low = 0,
|
|
},
|
|
{
|
|
.type = EV_KEY,
|
|
.code = KEY_POWER,
|
|
.gpio = D2NET_GPIO_PUSH_BUTTON,
|
|
.desc = "Front Push Button",
|
|
.active_low = 0,
|
|
},
|
|
};
|
|
|
|
static struct gpio_keys_platform_data d2net_button_data = {
|
|
.buttons = d2net_buttons,
|
|
.nbuttons = ARRAY_SIZE(d2net_buttons),
|
|
};
|
|
|
|
static struct platform_device d2net_gpio_buttons = {
|
|
.name = "gpio-keys",
|
|
.id = -1,
|
|
.dev = {
|
|
.platform_data = &d2net_button_data,
|
|
},
|
|
};
|
|
|
|
/*****************************************************************************
|
|
* General Setup
|
|
****************************************************************************/
|
|
|
|
static unsigned int d2net_mpp_modes[] __initdata = {
|
|
MPP0_GPIO, /* Board ID (bit 0) */
|
|
MPP1_GPIO, /* Board ID (bit 1) */
|
|
MPP2_GPIO, /* Board ID (bit 2) */
|
|
MPP3_GPIO, /* SATA 0 power */
|
|
MPP4_UNUSED,
|
|
MPP5_GPIO, /* Fan fail detection */
|
|
MPP6_GPIO, /* Red front LED */
|
|
MPP7_UNUSED,
|
|
MPP8_GPIO, /* Rear power switch (on|auto) */
|
|
MPP9_GPIO, /* Rear power switch (auto|off) */
|
|
MPP10_UNUSED,
|
|
MPP11_UNUSED,
|
|
MPP12_GPIO, /* SATA 1 power */
|
|
MPP13_UNUSED,
|
|
MPP14_SATA_LED, /* SATA 0 active */
|
|
MPP15_SATA_LED, /* SATA 1 active */
|
|
MPP16_GPIO, /* Blue front LED blink control */
|
|
MPP17_UNUSED,
|
|
MPP18_GPIO, /* Front button (0 = Released, 1 = Pushed ) */
|
|
MPP19_UNUSED,
|
|
0,
|
|
/* 22: USB port 1 fuse (0 = Fail, 1 = Ok) */
|
|
/* 23: Blue front LED off */
|
|
/* 24: Inhibit board power off (0 = Disabled, 1 = Enabled) */
|
|
};
|
|
|
|
#define D2NET_GPIO_INHIBIT_POWER_OFF 24
|
|
|
|
static void __init d2net_init(void)
|
|
{
|
|
/*
|
|
* Setup basic Orion functions. Need to be called early.
|
|
*/
|
|
orion5x_init();
|
|
|
|
orion5x_mpp_conf(d2net_mpp_modes);
|
|
|
|
/*
|
|
* Configure peripherals.
|
|
*/
|
|
orion5x_ehci0_init();
|
|
orion5x_eth_init(&d2net_eth_data);
|
|
orion5x_i2c_init();
|
|
orion5x_uart0_init();
|
|
|
|
d2net_sata_power_init();
|
|
orion5x_sata_init(&d2net_sata_data);
|
|
|
|
mvebu_mbus_add_window("devbus-boot", D2NET_NOR_BOOT_BASE,
|
|
D2NET_NOR_BOOT_SIZE);
|
|
platform_device_register(&d2net_nor_flash);
|
|
|
|
platform_device_register(&d2net_gpio_buttons);
|
|
|
|
d2net_gpio_leds_init();
|
|
|
|
pr_notice("d2net: Flash write are not yet supported.\n");
|
|
|
|
i2c_register_board_info(0, d2net_i2c_devices,
|
|
ARRAY_SIZE(d2net_i2c_devices));
|
|
|
|
orion_gpio_set_valid(D2NET_GPIO_INHIBIT_POWER_OFF, 1);
|
|
}
|
|
|
|
/* Warning: LaCie use a wrong mach-type (0x20e=526) in their bootloader. */
|
|
|
|
#ifdef CONFIG_MACH_D2NET
|
|
MACHINE_START(D2NET, "LaCie d2 Network")
|
|
.atag_offset = 0x100,
|
|
.init_machine = d2net_init,
|
|
.map_io = orion5x_map_io,
|
|
.init_early = orion5x_init_early,
|
|
.init_irq = orion5x_init_irq,
|
|
.init_time = orion5x_timer_init,
|
|
.fixup = tag_fixup_mem32,
|
|
.restart = orion5x_restart,
|
|
MACHINE_END
|
|
#endif
|
|
|
|
#ifdef CONFIG_MACH_BIGDISK
|
|
MACHINE_START(BIGDISK, "LaCie Big Disk Network")
|
|
.atag_offset = 0x100,
|
|
.init_machine = d2net_init,
|
|
.map_io = orion5x_map_io,
|
|
.init_early = orion5x_init_early,
|
|
.init_irq = orion5x_init_irq,
|
|
.init_time = orion5x_timer_init,
|
|
.fixup = tag_fixup_mem32,
|
|
.restart = orion5x_restart,
|
|
MACHINE_END
|
|
#endif
|
|
|