mirror of
https://github.com/edk2-porting/linux-next.git
synced 2024-12-25 21:54:06 +08:00
16c4c52435
Filenames of devictree binding documentation seems to be arbitrary and for me it is unneeded hazzle to find the corresponding documentation for a specific driver. Naming the description the same as the driver is a lot easier and makes sense to me since the driver defines the binding it understands. Also, remove a reference in one source to the binding documentation, since path information easily gets stale. Signed-off-by: Wolfram Sang <wolfram@the-dreams.de> Cc: Rob Herring <robherring2@gmail.com> Cc: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
34 lines
1.0 KiB
Plaintext
34 lines
1.0 KiB
Plaintext
* Marvell MMP I2C controller
|
|
|
|
Required properties :
|
|
|
|
- reg : Offset and length of the register set for the device
|
|
- compatible : should be "mrvl,mmp-twsi" where mmp is the name of a
|
|
compatible processor, e.g. pxa168, pxa910, mmp2, mmp3.
|
|
For the pxa2xx/pxa3xx, an additional node "mrvl,pxa-i2c" is required
|
|
as shown in the example below.
|
|
|
|
Recommended properties :
|
|
|
|
- interrupts : the interrupt number
|
|
- interrupt-parent : the phandle for the interrupt controller that
|
|
services interrupts for this device. If the parent is the default
|
|
interrupt controller in device tree, it could be ignored.
|
|
- mrvl,i2c-polling : Disable interrupt of i2c controller. Polling
|
|
status register of i2c controller instead.
|
|
- mrvl,i2c-fast-mode : Enable fast mode of i2c controller.
|
|
|
|
Examples:
|
|
twsi1: i2c@d4011000 {
|
|
compatible = "mrvl,mmp-twsi";
|
|
reg = <0xd4011000 0x1000>;
|
|
interrupts = <7>;
|
|
mrvl,i2c-fast-mode;
|
|
};
|
|
|
|
twsi2: i2c@d4025000 {
|
|
compatible = "mrvl,mmp-twsi";
|
|
reg = <0xd4025000 0x1000>;
|
|
interrupts = <58>;
|
|
};
|