mirror of
https://github.com/edk2-porting/linux-next.git
synced 2024-12-21 19:53:59 +08:00
95e9fd10f0
Bindings for gpio, interrupt controller, power management controller, timer, realtime clock, serial uart, ehci and uhci controllers and framebuffer controllers used on the arch-vt8500 platform. Framebuffer binding also specifies a 'display' node which is required for determining the lcd panel data. Signed-off-by: Tony Prisk <linux@prisktech.co.nz>
73 lines
1.8 KiB
Plaintext
73 lines
1.8 KiB
Plaintext
Device Tree Clock bindings for arch-vt8500
|
|
|
|
This binding uses the common clock binding[1].
|
|
|
|
[1] Documentation/devicetree/bindings/clock/clock-bindings.txt
|
|
|
|
Required properties:
|
|
- compatible : shall be one of the following:
|
|
"via,vt8500-pll-clock" - for a VT8500/WM8505 PLL clock
|
|
"wm,wm8650-pll-clock" - for a WM8650 PLL clock
|
|
"via,vt8500-device-clock" - for a VT/WM device clock
|
|
|
|
Required properties for PLL clocks:
|
|
- reg : shall be the control register offset from PMC base for the pll clock.
|
|
- clocks : shall be the input parent clock phandle for the clock. This should
|
|
be the reference clock.
|
|
- #clock-cells : from common clock binding; shall be set to 0.
|
|
|
|
Required properties for device clocks:
|
|
- clocks : shall be the input parent clock phandle for the clock. This should
|
|
be a pll output.
|
|
- #clock-cells : from common clock binding; shall be set to 0.
|
|
|
|
|
|
Device Clocks
|
|
|
|
Device clocks are required to have one or both of the following sets of
|
|
properties:
|
|
|
|
|
|
Gated device clocks:
|
|
|
|
Required properties:
|
|
- enable-reg : shall be the register offset from PMC base for the enable
|
|
register.
|
|
- enable-bit : shall be the bit within enable-reg to enable/disable the clock.
|
|
|
|
|
|
Divisor device clocks:
|
|
|
|
Required property:
|
|
- divisor-reg : shall be the register offset from PMC base for the divisor
|
|
register.
|
|
Optional property:
|
|
- divisor-mask : shall be the mask for the divisor register. Defaults to 0x1f
|
|
if not specified.
|
|
|
|
|
|
For example:
|
|
|
|
ref25: ref25M {
|
|
#clock-cells = <0>;
|
|
compatible = "fixed-clock";
|
|
clock-frequency = <25000000>;
|
|
};
|
|
|
|
plla: plla {
|
|
#clock-cells = <0>;
|
|
compatible = "wm,wm8650-pll-clock";
|
|
clocks = <&ref25>;
|
|
reg = <0x200>;
|
|
};
|
|
|
|
sdhc: sdhc {
|
|
#clock-cells = <0>;
|
|
compatible = "via,vt8500-device-clock";
|
|
clocks = <&pllb>;
|
|
divisor-reg = <0x328>;
|
|
divisor-mask = <0x3f>;
|
|
enable-reg = <0x254>;
|
|
enable-bit = <18>;
|
|
};
|