2
0
mirror of https://github.com/edk2-porting/linux-next.git synced 2024-12-24 21:24:00 +08:00
linux-next/arch/arm/mach-imx/Kconfig
Linus Torvalds 2795343705 arm-soc: clock driver changes
The new clock subsystem was merged in linux-3.4 without any users, this
 now moves the first three platforms over to it: imx, mxs and spear.
 
 The series also contains the changes for the clock subsystem itself,
 since Mike preferred to have it together with the platforms that require
 these changes, in order to avoid interdependencies and conflicts.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.11 (GNU/Linux)
 
 iQIcBAABAgAGBQJPuexPAAoJEIwa5zzehBx3YBsP/0nFhXjb5t1PdLfFzGKtcZVB
 j4zXWXMHQ1fA7wIfEpZF3Nnco6MQkufF5wJPoPdn1+wmkzCn3D6IwNVWVtW4U5i9
 VGyShSbgusAAYXUe/9yYj8eN+bbRQSvdN4eWYWU6+rRXShGZ5dZZmp+IPNl54dnW
 6F8uCnHX0cnIMCpGqV+41zZgZ/4wL2k9gdqu0LO6pi07o4tGd0Z4gcySgUFAnn1R
 kofNHueYIP4UgOg8DREoBzVKlpRqMou3S2kSZUfMeb3Q9ryF7UIvaGqIILyi7PKL
 kWd3nptg0EPavfL21SwXHiGpnDpB/Gj/F70kcPLus5RYujB24C9bvBmc26z68NZx
 Sz9mbElkkIU5duZsl1nxBWJ8IZ/tSWdtmC2xQMznmV7gHyGgVwr4j47f4Uv5sBvM
 14JHDO7mqN6E6FnTFZu/oPAN5pDjgL+TVNK5BU6Wkq0zitrA6eyKDqCvBCqkO6Nn
 tNzOuyRDzMOwM7HzqXhxqtzJWXylO1Mldc4bM8X4Cocf4pnLna/X6uP6dgE6A+JY
 azVYx4I/0NdEPerDTzIcEhBDgZeBVROhUQr+kHxc4rf6WzUUbu/wEo1UKXWV66oW
 1jb1yAFFWqYjkQuQc2PD4JSx35sFJaoSaoneRtmzBzRDfzSr5KjKj1E0e1skyMFq
 7ZVLCqZD0cB9DhmMDkWP
 =rwFF
 -----END PGP SIGNATURE-----

Merge tag 'clock' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull arm-soc clock driver changes from Olof Johansson:
 "The new clock subsystem was merged in linux-3.4 without any users,
  this now moves the first three platforms over to it: imx, mxs and
  spear.

  The series also contains the changes for the clock subsystem itself,
  since Mike preferred to have it together with the platforms that
  require these changes, in order to avoid interdependencies and
  conflicts."

Fix up trivial conflicts in arch/arm/mach-kirkwood/common.c (code
removed in one branch, added OF support in another) and
drivers/dma/imx-sdma.c (independent changes next to each other).

* tag 'clock' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (97 commits)
  clk: Fix CLK_SET_RATE_GATE flag validation in clk_set_rate().
  clk: Provide dummy clk_unregister()
  SPEAr: Update defconfigs
  SPEAr: Add SMI NOR partition info in dts files
  SPEAr: Switch to common clock framework
  SPEAr: Call clk_prepare() before calling clk_enable
  SPEAr: clk: Add General Purpose Timer Synthesizer clock
  SPEAr: clk: Add Fractional Synthesizer clock
  SPEAr: clk: Add Auxiliary Synthesizer clock
  SPEAr: clk: Add VCO-PLL Synthesizer clock
  SPEAr: Add DT bindings for SPEAr's timer
  ARM i.MX: remove now unused clock files
  ARM: i.MX6: implement clocks using common clock framework
  ARM i.MX35: implement clocks using common clock framework
  ARM i.MX5: implement clocks using common clock framework
  ARM: Kirkwood: Replace clock gating
  ARM: Orion: Audio: Add clk/clkdev support
  ARM: Orion: PCIE: Add support for clk
  ARM: Orion: XOR: Add support for clk
  ARM: Orion: CESA: Add support for clk
  ...
2012-05-26 12:42:29 -07:00

840 lines
22 KiB
Plaintext

config HAVE_IMX_GPC
bool
config HAVE_IMX_MMDC
bool
config HAVE_IMX_SRC
bool
config ARCH_MX1
bool
config MACH_MX21
bool
config ARCH_MX25
bool
config MACH_MX27
bool
config ARCH_MX5
bool
config ARCH_MX50
bool
config ARCH_MX51
bool
config ARCH_MX53
bool
config SOC_IMX1
bool
select ARCH_MX1
select COMMON_CLK
select CPU_ARM920T
select IMX_HAVE_IOMUX_V1
select MXC_AVIC
config SOC_IMX21
bool
select MACH_MX21
select CPU_ARM926T
select COMMON_CLK
select IMX_HAVE_IOMUX_V1
select MXC_AVIC
config SOC_IMX25
bool
select ARCH_MX25
select COMMON_CLK
select CPU_ARM926T
select ARCH_MXC_IOMUX_V3
select MXC_AVIC
config SOC_IMX27
bool
select MACH_MX27
select CPU_ARM926T
select COMMON_CLK
select IMX_HAVE_IOMUX_V1
select MXC_AVIC
config SOC_IMX31
bool
select CPU_V6
select IMX_HAVE_PLATFORM_MXC_RNGA
select MXC_AVIC
select COMMON_CLK
select SMP_ON_UP if SMP
config SOC_IMX35
bool
select CPU_V6
select ARCH_MXC_IOMUX_V3
select COMMON_CLK
select HAVE_EPIT
select MXC_AVIC
select SMP_ON_UP if SMP
config SOC_IMX5
select CPU_V7
select MXC_TZIC
select COMMON_CLK
select ARCH_MXC_IOMUX_V3
select ARCH_HAS_CPUFREQ
select ARCH_MX5
bool
config SOC_IMX50
bool
select SOC_IMX5
select ARCH_MX50
config SOC_IMX51
bool
select SOC_IMX5
select ARCH_MX5
select ARCH_MX51
config SOC_IMX53
bool
select SOC_IMX5
select ARCH_MX5
select ARCH_MX53
if ARCH_IMX_V4_V5
comment "MX1 platforms:"
config MACH_MXLADS
bool
config ARCH_MX1ADS
bool "MX1ADS platform"
select MACH_MXLADS
select SOC_IMX1
select IMX_HAVE_PLATFORM_IMX_I2C
select IMX_HAVE_PLATFORM_IMX_UART
help
Say Y here if you are using Motorola MX1ADS/MXLADS boards
config MACH_SCB9328
bool "Synertronixx scb9328"
select IMX_HAVE_PLATFORM_IMX_UART
help
Say Y here if you are using a Synertronixx scb9328 board
config MACH_APF9328
bool "APF9328"
select SOC_IMX1
select IMX_HAVE_PLATFORM_IMX_I2C
select IMX_HAVE_PLATFORM_IMX_UART
help
Say Yes here if you are using the Armadeus APF9328 development board
comment "MX21 platforms:"
config MACH_MX21ADS
bool "MX21ADS platform"
select SOC_IMX21
select IMX_HAVE_PLATFORM_IMX_FB
select IMX_HAVE_PLATFORM_IMX_UART
select IMX_HAVE_PLATFORM_MXC_MMC
select IMX_HAVE_PLATFORM_MXC_NAND
help
Include support for MX21ADS platform. This includes specific
configurations for the board and its peripherals.
comment "MX25 platforms:"
config MACH_MX25_3DS
bool "Support MX25PDK (3DS) Platform"
select SOC_IMX25
select IMX_HAVE_PLATFORM_FLEXCAN
select IMX_HAVE_PLATFORM_FSL_USB2_UDC
select IMX_HAVE_PLATFORM_IMX2_WDT
select IMX_HAVE_PLATFORM_IMXDI_RTC
select IMX_HAVE_PLATFORM_IMX_I2C
select IMX_HAVE_PLATFORM_IMX_SSI
select IMX_HAVE_PLATFORM_IMX_FB
select IMX_HAVE_PLATFORM_IMX_KEYPAD
select IMX_HAVE_PLATFORM_IMX_UART
select IMX_HAVE_PLATFORM_MXC_EHCI
select IMX_HAVE_PLATFORM_MXC_NAND
select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
config MACH_EUKREA_CPUIMX25SD
bool "Support Eukrea CPUIMX25 Platform"
select SOC_IMX25
select IMX_HAVE_PLATFORM_FLEXCAN
select IMX_HAVE_PLATFORM_FSL_USB2_UDC
select IMX_HAVE_PLATFORM_IMX2_WDT
select IMX_HAVE_PLATFORM_IMXDI_RTC
select IMX_HAVE_PLATFORM_IMX_FB
select IMX_HAVE_PLATFORM_IMX_I2C
select IMX_HAVE_PLATFORM_IMX_UART
select IMX_HAVE_PLATFORM_MXC_EHCI
select IMX_HAVE_PLATFORM_MXC_NAND
select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
select MXC_ULPI if USB_ULPI
choice
prompt "Baseboard"
depends on MACH_EUKREA_CPUIMX25SD
default MACH_EUKREA_MBIMXSD25_BASEBOARD
config MACH_EUKREA_MBIMXSD25_BASEBOARD
bool "Eukrea MBIMXSD development board"
select IMX_HAVE_PLATFORM_GPIO_KEYS
select IMX_HAVE_PLATFORM_IMX_SSI
select IMX_HAVE_PLATFORM_SPI_IMX
select LEDS_GPIO_REGISTER
help
This adds board specific devices that can be found on Eukrea's
MBIMXSD evaluation board.
endchoice
comment "MX27 platforms:"
config MACH_MX27ADS
bool "MX27ADS platform"
select SOC_IMX27
select IMX_HAVE_PLATFORM_IMX_FB
select IMX_HAVE_PLATFORM_IMX_I2C
select IMX_HAVE_PLATFORM_IMX_UART
select IMX_HAVE_PLATFORM_MXC_MMC
select IMX_HAVE_PLATFORM_MXC_NAND
select IMX_HAVE_PLATFORM_MXC_W1
help
Include support for MX27ADS platform. This includes specific
configurations for the board and its peripherals.
config MACH_PCM038
bool "Phytec phyCORE-i.MX27 CPU module (pcm038)"
select SOC_IMX27
select IMX_HAVE_PLATFORM_IMX2_WDT
select IMX_HAVE_PLATFORM_IMX_I2C
select IMX_HAVE_PLATFORM_IMX_UART
select IMX_HAVE_PLATFORM_MXC_EHCI
select IMX_HAVE_PLATFORM_MXC_NAND
select IMX_HAVE_PLATFORM_MXC_W1
select IMX_HAVE_PLATFORM_SPI_IMX
select MXC_ULPI if USB_ULPI
help
Include support for phyCORE-i.MX27 (aka pcm038) platform. This
includes specific configurations for the module and its peripherals.
choice
prompt "Baseboard"
depends on MACH_PCM038
default MACH_PCM970_BASEBOARD
config MACH_PCM970_BASEBOARD
bool "PHYTEC PCM970 development board"
select IMX_HAVE_PLATFORM_IMX_FB
select IMX_HAVE_PLATFORM_MXC_MMC
help
This adds board specific devices that can be found on Phytec's
PCM970 evaluation board.
endchoice
config MACH_CPUIMX27
bool "Eukrea CPUIMX27 module"
select SOC_IMX27
select IMX_HAVE_PLATFORM_FSL_USB2_UDC
select IMX_HAVE_PLATFORM_IMX2_WDT
select IMX_HAVE_PLATFORM_IMX_I2C
select IMX_HAVE_PLATFORM_IMX_UART
select IMX_HAVE_PLATFORM_MXC_EHCI
select IMX_HAVE_PLATFORM_MXC_NAND
select IMX_HAVE_PLATFORM_MXC_W1
select MXC_ULPI if USB_ULPI
help
Include support for Eukrea CPUIMX27 platform. This includes
specific configurations for the module and its peripherals.
config MACH_EUKREA_CPUIMX27_USESDHC2
bool "CPUIMX27 integrates SDHC2 module"
depends on MACH_CPUIMX27
select IMX_HAVE_PLATFORM_MXC_MMC
help
This adds support for the internal SDHC2 used on CPUIMX27
for wifi or eMMC.
config MACH_EUKREA_CPUIMX27_USEUART4
bool "CPUIMX27 integrates UART4 module"
depends on MACH_CPUIMX27
help
This adds support for the internal UART4 used on CPUIMX27
for bluetooth.
choice
prompt "Baseboard"
depends on MACH_CPUIMX27
default MACH_EUKREA_MBIMX27_BASEBOARD
config MACH_EUKREA_MBIMX27_BASEBOARD
bool "Eukrea MBIMX27 development board"
select IMX_HAVE_PLATFORM_IMX_FB
select IMX_HAVE_PLATFORM_IMX_KEYPAD
select IMX_HAVE_PLATFORM_IMX_SSI
select IMX_HAVE_PLATFORM_IMX_UART
select IMX_HAVE_PLATFORM_MXC_MMC
select IMX_HAVE_PLATFORM_SPI_IMX
select LEDS_GPIO_REGISTER
help
This adds board specific devices that can be found on Eukrea's
MBIMX27 evaluation board.
endchoice
config MACH_MX27_3DS
bool "MX27PDK platform"
select SOC_IMX27
select IMX_HAVE_PLATFORM_FSL_USB2_UDC
select IMX_HAVE_PLATFORM_IMX2_WDT
select IMX_HAVE_PLATFORM_IMX_FB
select IMX_HAVE_PLATFORM_IMX_I2C
select IMX_HAVE_PLATFORM_IMX_KEYPAD
select IMX_HAVE_PLATFORM_IMX_UART
select IMX_HAVE_PLATFORM_MX2_CAMERA
select IMX_HAVE_PLATFORM_MXC_EHCI
select IMX_HAVE_PLATFORM_MXC_MMC
select IMX_HAVE_PLATFORM_SPI_IMX
select MXC_DEBUG_BOARD
select MXC_ULPI if USB_ULPI
help
Include support for MX27PDK platform. This includes specific
configurations for the board and its peripherals.
config MACH_IMX27_VISSTRIM_M10
bool "Vista Silicon i.MX27 Visstrim_m10"
select SOC_IMX27
select IMX_HAVE_PLATFORM_GPIO_KEYS
select IMX_HAVE_PLATFORM_IMX_I2C
select IMX_HAVE_PLATFORM_IMX_SSI
select IMX_HAVE_PLATFORM_IMX_UART
select IMX_HAVE_PLATFORM_MX2_CAMERA
select IMX_HAVE_PLATFORM_MXC_EHCI
select IMX_HAVE_PLATFORM_MXC_MMC
select LEDS_GPIO_REGISTER
help
Include support for Visstrim_m10 platform and its different variants.
This includes specific configurations for the board and its
peripherals.
config MACH_IMX27LITE
bool "LogicPD MX27 LITEKIT platform"
select SOC_IMX27
select IMX_HAVE_PLATFORM_IMX_UART
select IMX_HAVE_PLATFORM_IMX_SSI
help
Include support for MX27 LITEKIT platform. This includes specific
configurations for the board and its peripherals.
config MACH_PCA100
bool "Phytec phyCARD-s (pca100)"
select SOC_IMX27
select IMX_HAVE_PLATFORM_FSL_USB2_UDC
select IMX_HAVE_PLATFORM_IMX2_WDT
select IMX_HAVE_PLATFORM_IMX_FB
select IMX_HAVE_PLATFORM_IMX_I2C
select IMX_HAVE_PLATFORM_IMX_SSI
select IMX_HAVE_PLATFORM_IMX_UART
select IMX_HAVE_PLATFORM_MXC_EHCI
select IMX_HAVE_PLATFORM_MXC_MMC
select IMX_HAVE_PLATFORM_MXC_NAND
select IMX_HAVE_PLATFORM_MXC_W1
select IMX_HAVE_PLATFORM_SPI_IMX
select MXC_ULPI if USB_ULPI
help
Include support for phyCARD-s (aka pca100) platform. This
includes specific configurations for the module and its peripherals.
config MACH_MXT_TD60
bool "Maxtrack i-MXT TD60"
select SOC_IMX27
select IMX_HAVE_PLATFORM_IMX_FB
select IMX_HAVE_PLATFORM_IMX_I2C
select IMX_HAVE_PLATFORM_IMX_UART
select IMX_HAVE_PLATFORM_MXC_MMC
select IMX_HAVE_PLATFORM_MXC_NAND
help
Include support for i-MXT (aka td60) platform. This
includes specific configurations for the module and its peripherals.
config MACH_IMX27IPCAM
bool "IMX27 IPCAM platform"
select SOC_IMX27
select IMX_HAVE_PLATFORM_IMX2_WDT
select IMX_HAVE_PLATFORM_IMX_UART
help
Include support for IMX27 IPCAM platform. This includes specific
configurations for the board and its peripherals.
config MACH_IMX27_DT
bool "Support i.MX27 platforms from device tree"
select SOC_IMX27
select USE_OF
help
Include support for Freescale i.MX27 based platforms
using the device tree for discovery
endif
if ARCH_IMX_V6_V7
comment "MX31 platforms:"
config MACH_MX31ADS
bool "Support MX31ADS platforms"
select SOC_IMX31
select IMX_HAVE_PLATFORM_IMX_I2C
select IMX_HAVE_PLATFORM_IMX_SSI
select IMX_HAVE_PLATFORM_IMX_UART
default y
help
Include support for MX31ADS platform. This includes specific
configurations for the board and its peripherals.
config MACH_MX31ADS_WM1133_EV1
bool "Support Wolfson Microelectronics 1133-EV1 module"
depends on MACH_MX31ADS
depends on MFD_WM8350_I2C
depends on REGULATOR_WM8350
select MFD_WM8350_CONFIG_MODE_0
select MFD_WM8352_CONFIG_MODE_0
help
Include support for the Wolfson Microelectronics 1133-EV1 PMU
and audio module for the MX31ADS platform.
config MACH_MX31LILLY
bool "Support MX31 LILLY-1131 platforms (INCO startec)"
select SOC_IMX31
select IMX_HAVE_PLATFORM_IMX_UART
select IMX_HAVE_PLATFORM_IPU_CORE
select IMX_HAVE_PLATFORM_MXC_EHCI
select IMX_HAVE_PLATFORM_MXC_MMC
select IMX_HAVE_PLATFORM_SPI_IMX
select MXC_ULPI if USB_ULPI
help
Include support for mx31 based LILLY1131 modules. This includes
specific configurations for the board and its peripherals.
config MACH_MX31LITE
bool "Support MX31 LITEKIT (LogicPD)"
select SOC_IMX31
select MXC_ULPI if USB_ULPI
select IMX_HAVE_PLATFORM_IMX2_WDT
select IMX_HAVE_PLATFORM_IMX_UART
select IMX_HAVE_PLATFORM_MXC_EHCI
select IMX_HAVE_PLATFORM_MXC_MMC
select IMX_HAVE_PLATFORM_MXC_NAND
select IMX_HAVE_PLATFORM_MXC_RTC
select IMX_HAVE_PLATFORM_SPI_IMX
select LEDS_GPIO_REGISTER
help
Include support for MX31 LITEKIT platform. This includes specific
configurations for the board and its peripherals.
config MACH_PCM037
bool "Support Phytec pcm037 (i.MX31) platforms"
select SOC_IMX31
select IMX_HAVE_PLATFORM_FSL_USB2_UDC
select IMX_HAVE_PLATFORM_IMX2_WDT
select IMX_HAVE_PLATFORM_IMX_I2C
select IMX_HAVE_PLATFORM_IMX_UART
select IMX_HAVE_PLATFORM_IPU_CORE
select IMX_HAVE_PLATFORM_MXC_EHCI
select IMX_HAVE_PLATFORM_MXC_MMC
select IMX_HAVE_PLATFORM_MXC_NAND
select IMX_HAVE_PLATFORM_MXC_W1
select MXC_ULPI if USB_ULPI
help
Include support for Phytec pcm037 platform. This includes
specific configurations for the board and its peripherals.
config MACH_PCM037_EET
bool "Support pcm037 EET board extensions"
depends on MACH_PCM037
select IMX_HAVE_PLATFORM_GPIO_KEYS
select IMX_HAVE_PLATFORM_SPI_IMX
help
Add support for PCM037 EET baseboard extensions. If you are using the
OLED display with EET, use "video=mx3fb:CMEL-OLED" kernel
command-line parameter.
config MACH_MX31_3DS
bool "Support MX31PDK (3DS)"
select SOC_IMX31
select MXC_DEBUG_BOARD
select IMX_HAVE_PLATFORM_FSL_USB2_UDC
select IMX_HAVE_PLATFORM_IMX2_WDT
select IMX_HAVE_PLATFORM_IMX_I2C
select IMX_HAVE_PLATFORM_IMX_KEYPAD
select IMX_HAVE_PLATFORM_IMX_UART
select IMX_HAVE_PLATFORM_IPU_CORE
select IMX_HAVE_PLATFORM_MXC_EHCI
select IMX_HAVE_PLATFORM_MXC_MMC
select IMX_HAVE_PLATFORM_MXC_NAND
select IMX_HAVE_PLATFORM_SPI_IMX
select MXC_ULPI if USB_ULPI
help
Include support for MX31PDK (3DS) platform. This includes specific
configurations for the board and its peripherals.
config MACH_MX31_3DS_MXC_NAND_USE_BBT
bool "Make the MXC NAND driver use the in flash Bad Block Table"
depends on MACH_MX31_3DS
depends on MTD_NAND_MXC
help
Enable this if you want that the MXC NAND driver uses the in flash
Bad Block Table to know what blocks are bad instead of scanning the
entire flash looking for bad block markers.
config MACH_MX31MOBOARD
bool "Support mx31moboard platforms (EPFL Mobots group)"
select SOC_IMX31
select IMX_HAVE_PLATFORM_FSL_USB2_UDC
select IMX_HAVE_PLATFORM_IMX2_WDT
select IMX_HAVE_PLATFORM_IMX_I2C
select IMX_HAVE_PLATFORM_IMX_SSI
select IMX_HAVE_PLATFORM_IMX_UART
select IMX_HAVE_PLATFORM_IPU_CORE
select IMX_HAVE_PLATFORM_MXC_EHCI
select IMX_HAVE_PLATFORM_MXC_MMC
select IMX_HAVE_PLATFORM_SPI_IMX
select LEDS_GPIO_REGISTER
select MXC_ULPI if USB_ULPI
help
Include support for mx31moboard platform. This includes specific
configurations for the board and its peripherals.
config MACH_QONG
bool "Support Dave/DENX QongEVB-LITE platform"
select SOC_IMX31
select IMX_HAVE_PLATFORM_IMX_UART
select IMX_HAVE_PLATFORM_IMX2_WDT
help
Include support for Dave/DENX QongEVB-LITE platform. This includes
specific configurations for the board and its peripherals.
config MACH_ARMADILLO5X0
bool "Support Atmark Armadillo-500 Development Base Board"
select SOC_IMX31
select IMX_HAVE_PLATFORM_GPIO_KEYS
select IMX_HAVE_PLATFORM_IMX_I2C
select IMX_HAVE_PLATFORM_IMX_UART
select IMX_HAVE_PLATFORM_IPU_CORE
select IMX_HAVE_PLATFORM_MXC_EHCI
select IMX_HAVE_PLATFORM_MXC_MMC
select IMX_HAVE_PLATFORM_MXC_NAND
select MXC_ULPI if USB_ULPI
help
Include support for Atmark Armadillo-500 platform. This includes
specific configurations for the board and its peripherals.
config MACH_KZM_ARM11_01
bool "Support KZM-ARM11-01(Kyoto Microcomputer)"
select SOC_IMX31
select IMX_HAVE_PLATFORM_IMX_UART
help
Include support for KZM-ARM11-01. This includes specific
configurations for the board and its peripherals.
config MACH_BUG
bool "Support Buglabs BUGBase platform"
select SOC_IMX31
select IMX_HAVE_PLATFORM_IMX_UART
default y
help
Include support for BUGBase 1.3 platform. This includes specific
configurations for the board and its peripherals.
comment "MX35 platforms:"
config MACH_PCM043
bool "Support Phytec pcm043 (i.MX35) platforms"
select SOC_IMX35
select IMX_HAVE_PLATFORM_FLEXCAN
select IMX_HAVE_PLATFORM_FSL_USB2_UDC
select IMX_HAVE_PLATFORM_IMX2_WDT
select IMX_HAVE_PLATFORM_IMX_I2C
select IMX_HAVE_PLATFORM_IMX_SSI
select IMX_HAVE_PLATFORM_IMX_UART
select IMX_HAVE_PLATFORM_IPU_CORE
select IMX_HAVE_PLATFORM_MXC_EHCI
select IMX_HAVE_PLATFORM_MXC_NAND
select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
select MXC_ULPI if USB_ULPI
help
Include support for Phytec pcm043 platform. This includes
specific configurations for the board and its peripherals.
config MACH_MX35_3DS
bool "Support MX35PDK platform"
select SOC_IMX35
select MXC_DEBUG_BOARD
select IMX_HAVE_PLATFORM_FSL_USB2_UDC
select IMX_HAVE_PLATFORM_IMX2_WDT
select IMX_HAVE_PLATFORM_IMX_FB
select IMX_HAVE_PLATFORM_IMX_I2C
select IMX_HAVE_PLATFORM_IMX_UART
select IMX_HAVE_PLATFORM_IPU_CORE
select IMX_HAVE_PLATFORM_MXC_EHCI
select IMX_HAVE_PLATFORM_MXC_NAND
select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
help
Include support for MX35PDK platform. This includes specific
configurations for the board and its peripherals.
config MACH_EUKREA_CPUIMX35SD
bool "Support Eukrea CPUIMX35 Platform"
select SOC_IMX35
select IMX_HAVE_PLATFORM_FLEXCAN
select IMX_HAVE_PLATFORM_FSL_USB2_UDC
select IMX_HAVE_PLATFORM_IMX2_WDT
select IMX_HAVE_PLATFORM_IMX_I2C
select IMX_HAVE_PLATFORM_IMX_UART
select IMX_HAVE_PLATFORM_MXC_EHCI
select IMX_HAVE_PLATFORM_MXC_NAND
select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
select MXC_ULPI if USB_ULPI
help
Include support for Eukrea CPUIMX35 platform. This includes
specific configurations for the board and its peripherals.
choice
prompt "Baseboard"
depends on MACH_EUKREA_CPUIMX35SD
default MACH_EUKREA_MBIMXSD35_BASEBOARD
config MACH_EUKREA_MBIMXSD35_BASEBOARD
bool "Eukrea MBIMXSD development board"
select IMX_HAVE_PLATFORM_GPIO_KEYS
select IMX_HAVE_PLATFORM_IMX_SSI
select IMX_HAVE_PLATFORM_IPU_CORE
select IMX_HAVE_PLATFORM_SPI_IMX
select LEDS_GPIO_REGISTER
help
This adds board specific devices that can be found on Eukrea's
MBIMXSD evaluation board.
endchoice
config MACH_VPR200
bool "Support VPR200 platform"
select SOC_IMX35
select IMX_HAVE_PLATFORM_FSL_USB2_UDC
select IMX_HAVE_PLATFORM_GPIO_KEYS
select IMX_HAVE_PLATFORM_IMX2_WDT
select IMX_HAVE_PLATFORM_IMX_UART
select IMX_HAVE_PLATFORM_IMX_I2C
select IMX_HAVE_PLATFORM_IPU_CORE
select IMX_HAVE_PLATFORM_MXC_EHCI
select IMX_HAVE_PLATFORM_MXC_NAND
select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
help
Include support for VPR200 platform. This includes specific
configurations for the board and its peripherals.
comment "i.MX5 platforms:"
config MACH_MX50_RDP
bool "Support MX50 reference design platform"
depends on BROKEN
select SOC_IMX50
select IMX_HAVE_PLATFORM_IMX_I2C
select IMX_HAVE_PLATFORM_IMX_UART
select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
select IMX_HAVE_PLATFORM_SPI_IMX
help
Include support for MX50 reference design platform (RDP) board. This
includes specific configurations for the board and its peripherals.
comment "i.MX51 machines:"
config MACH_IMX51_DT
bool "Support i.MX51 platforms from device tree"
select SOC_IMX51
select USE_OF
select MACH_MX51_BABBAGE
help
Include support for Freescale i.MX51 based platforms
using the device tree for discovery
config MACH_MX51_BABBAGE
bool "Support MX51 BABBAGE platforms"
select SOC_IMX51
select IMX_HAVE_PLATFORM_FSL_USB2_UDC
select IMX_HAVE_PLATFORM_IMX2_WDT
select IMX_HAVE_PLATFORM_IMX_I2C
select IMX_HAVE_PLATFORM_IMX_UART
select IMX_HAVE_PLATFORM_MXC_EHCI
select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
select IMX_HAVE_PLATFORM_SPI_IMX
help
Include support for MX51 Babbage platform, also known as MX51EVK in
u-boot. This includes specific configurations for the board and its
peripherals.
config MACH_MX51_3DS
bool "Support MX51PDK (3DS)"
select SOC_IMX51
select IMX_HAVE_PLATFORM_IMX2_WDT
select IMX_HAVE_PLATFORM_IMX_KEYPAD
select IMX_HAVE_PLATFORM_IMX_UART
select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
select IMX_HAVE_PLATFORM_SPI_IMX
select MXC_DEBUG_BOARD
help
Include support for MX51PDK (3DS) platform. This includes specific
configurations for the board and its peripherals.
config MACH_EUKREA_CPUIMX51SD
bool "Support Eukrea CPUIMX51SD module"
select SOC_IMX51
select IMX_HAVE_PLATFORM_FSL_USB2_UDC
select IMX_HAVE_PLATFORM_IMX_I2C
select IMX_HAVE_PLATFORM_IMX_UART
select IMX_HAVE_PLATFORM_IMX2_WDT
select IMX_HAVE_PLATFORM_MXC_EHCI
select IMX_HAVE_PLATFORM_MXC_NAND
select IMX_HAVE_PLATFORM_SPI_IMX
help
Include support for Eukrea CPUIMX51SD platform. This includes
specific configurations for the module and its peripherals.
choice
prompt "Baseboard"
depends on MACH_EUKREA_CPUIMX51SD
default MACH_EUKREA_MBIMXSD51_BASEBOARD
config MACH_EUKREA_MBIMXSD51_BASEBOARD
prompt "Eukrea MBIMXSD development board"
bool
select IMX_HAVE_PLATFORM_IMX_SSI
select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
select LEDS_GPIO_REGISTER
help
This adds board specific devices that can be found on Eukrea's
MBIMXSD evaluation board.
endchoice
config MX51_EFIKA_COMMON
bool
select SOC_IMX51
select IMX_HAVE_PLATFORM_IMX_UART
select IMX_HAVE_PLATFORM_MXC_EHCI
select IMX_HAVE_PLATFORM_PATA_IMX
select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
select IMX_HAVE_PLATFORM_SPI_IMX
select MXC_ULPI if USB_ULPI
config MACH_MX51_EFIKAMX
bool "Support MX51 Genesi Efika MX nettop"
select LEDS_GPIO_REGISTER
select MX51_EFIKA_COMMON
help
Include support for Genesi Efika MX nettop. This includes specific
configurations for the board and its peripherals.
config MACH_MX51_EFIKASB
bool "Support MX51 Genesi Efika Smartbook"
select LEDS_GPIO_REGISTER
select MX51_EFIKA_COMMON
help
Include support for Genesi Efika Smartbook. This includes specific
configurations for the board and its peripherals.
comment "i.MX53 machines:"
config MACH_IMX53_DT
bool "Support i.MX53 platforms from device tree"
select SOC_IMX53
select USE_OF
select MACH_MX53_ARD
select MACH_MX53_EVK
select MACH_MX53_LOCO
select MACH_MX53_SMD
help
Include support for Freescale i.MX53 based platforms
using the device tree for discovery
config MACH_MX53_EVK
bool "Support MX53 EVK platforms"
select SOC_IMX53
select IMX_HAVE_PLATFORM_IMX2_WDT
select IMX_HAVE_PLATFORM_IMX_UART
select IMX_HAVE_PLATFORM_IMX_I2C
select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
select IMX_HAVE_PLATFORM_SPI_IMX
select LEDS_GPIO_REGISTER
help
Include support for MX53 EVK platform. This includes specific
configurations for the board and its peripherals.
config MACH_MX53_SMD
bool "Support MX53 SMD platforms"
select SOC_IMX53
select IMX_HAVE_PLATFORM_IMX2_WDT
select IMX_HAVE_PLATFORM_IMX_I2C
select IMX_HAVE_PLATFORM_IMX_UART
select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
help
Include support for MX53 SMD platform. This includes specific
configurations for the board and its peripherals.
config MACH_MX53_LOCO
bool "Support MX53 LOCO platforms"
select SOC_IMX53
select IMX_HAVE_PLATFORM_IMX2_WDT
select IMX_HAVE_PLATFORM_IMX_I2C
select IMX_HAVE_PLATFORM_IMX_UART
select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
select IMX_HAVE_PLATFORM_GPIO_KEYS
select LEDS_GPIO_REGISTER
help
Include support for MX53 LOCO platform. This includes specific
configurations for the board and its peripherals.
config MACH_MX53_ARD
bool "Support MX53 ARD platforms"
select SOC_IMX53
select IMX_HAVE_PLATFORM_IMX2_WDT
select IMX_HAVE_PLATFORM_IMX_I2C
select IMX_HAVE_PLATFORM_IMX_UART
select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
select IMX_HAVE_PLATFORM_GPIO_KEYS
help
Include support for MX53 ARD platform. This includes specific
configurations for the board and its peripherals.
comment "i.MX6 family:"
config SOC_IMX6Q
bool "i.MX6 Quad support"
select ARM_CPU_SUSPEND if PM
select ARM_GIC
select COMMON_CLK
select CPU_V7
select HAVE_ARM_SCU
select HAVE_IMX_GPC
select HAVE_IMX_MMDC
select HAVE_IMX_SRC
select HAVE_SMP
select PINCTRL
select PINCTRL_IMX6Q
select USE_OF
help
This enables support for Freescale i.MX6 Quad processor.
endif