2
0
mirror of https://github.com/edk2-porting/linux-next.git synced 2024-12-30 16:13:54 +08:00
linux-next/drivers/net/3c501.h
Jeff Garzik 09f75cd7bf [NET] drivers/net: statistics cleanup #1 -- save memory and shrink code
We now have struct net_device_stats embedded in struct net_device,
and the default ->get_stats() hook does the obvious thing for us.

Run through drivers/net/* and remove the driver-local storage of
statistics, and driver-local ->get_stats() hook where applicable.

This was just the low-hanging fruit in drivers/net; plenty more drivers
remain to be updated.

[ Resolved conflicts with napi_struct changes and fix sunqe build
  regression... -DaveM ]

Signed-off-by: Jeff Garzik <jeff@garzik.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-10 16:51:16 -07:00

92 lines
2.6 KiB
C

/*
* Index to functions.
*/
static int el1_probe1(struct net_device *dev, int ioaddr);
static int el_open(struct net_device *dev);
static void el_timeout(struct net_device *dev);
static int el_start_xmit(struct sk_buff *skb, struct net_device *dev);
static irqreturn_t el_interrupt(int irq, void *dev_id);
static void el_receive(struct net_device *dev);
static void el_reset(struct net_device *dev);
static int el1_close(struct net_device *dev);
static void set_multicast_list(struct net_device *dev);
static const struct ethtool_ops netdev_ethtool_ops;
#define EL1_IO_EXTENT 16
#ifndef EL_DEBUG
#define EL_DEBUG 0 /* use 0 for production, 1 for devel., >2 for debug */
#endif /* Anything above 5 is wordy death! */
#define debug el_debug
static int el_debug = EL_DEBUG;
/*
* Board-specific info in dev->priv.
*/
struct net_local
{
int tx_pkt_start; /* The length of the current Tx packet. */
int collisions; /* Tx collisions this packet */
int loading; /* Spot buffer load collisions */
int txing; /* True if card is in TX mode */
spinlock_t lock; /* Serializing lock */
};
#define RX_STATUS (ioaddr + 0x06)
#define RX_CMD RX_STATUS
#define TX_STATUS (ioaddr + 0x07)
#define TX_CMD TX_STATUS
#define GP_LOW (ioaddr + 0x08)
#define GP_HIGH (ioaddr + 0x09)
#define RX_BUF_CLR (ioaddr + 0x0A)
#define RX_LOW (ioaddr + 0x0A)
#define RX_HIGH (ioaddr + 0x0B)
#define SAPROM (ioaddr + 0x0C)
#define AX_STATUS (ioaddr + 0x0E)
#define AX_CMD AX_STATUS
#define DATAPORT (ioaddr + 0x0F)
#define TX_RDY 0x08 /* In TX_STATUS */
#define EL1_DATAPTR 0x08
#define EL1_RXPTR 0x0A
#define EL1_SAPROM 0x0C
#define EL1_DATAPORT 0x0f
/*
* Writes to the ax command register.
*/
#define AX_OFF 0x00 /* Irq off, buffer access on */
#define AX_SYS 0x40 /* Load the buffer */
#define AX_XMIT 0x44 /* Transmit a packet */
#define AX_RX 0x48 /* Receive a packet */
#define AX_LOOP 0x0C /* Loopback mode */
#define AX_RESET 0x80
/*
* Normal receive mode written to RX_STATUS. We must intr on short packets
* to avoid bogus rx lockups.
*/
#define RX_NORM 0xA8 /* 0x68 == all addrs, 0xA8 only to me. */
#define RX_PROM 0x68 /* Senior Prom, uhmm promiscuous mode. */
#define RX_MULT 0xE8 /* Accept multicast packets. */
#define TX_NORM 0x0A /* Interrupt on everything that might hang the chip */
/*
* TX_STATUS register.
*/
#define TX_COLLISION 0x02
#define TX_16COLLISIONS 0x04
#define TX_READY 0x08
#define RX_RUNT 0x08
#define RX_MISSED 0x01 /* Missed a packet due to 3c501 braindamage. */
#define RX_GOOD 0x30 /* Good packet 0x20, or simple overflow 0x10. */