Song Qiang 121354b2ec iio: magnetometer: Add driver support for PNI RM3100 ... PNI RM3100 is a high resolution, large signal immunity magnetometer, composed of 3 single sensors and a processing chip with a MagI2C interface. Following functions are available: - Single-shot measurement from /sys/bus/iio/devices/iio:deviceX/in_magn_{axis}_raw - Triggerd buffer measurement. - DRDY pin for data ready trigger. - Both i2c and spi interface are supported. - Both interrupt and polling measurement is supported, depends on if the 'interrupts' in DT is declared. Signed-off-by: Song Qiang <songqiang1304521@gmail.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>		2018-11-16 18:32:31 +00:00
..
accel	iio: st-accel: add support for lis3de	2018-11-16 18:32:30 +00:00
adc	iio: adc: rcar-gyroadc: convert to SPDX identifiers	2018-11-16 18:32:28 +00:00
afe	iio: afe: rescale: new driver	2018-04-28 18:03:22 +01:00
amplifiers	drivers: iio: Update MODULE AUTHOR email address	2018-08-19 17:23:39 +01:00
buffer	iio:kfifo_buf: check for uint overflow	2018-03-30 11:16:12 +01:00
chemical	iio: chemical: bme680: Remove field value defines	2018-08-25 09:13:45 +01:00
common	iio: st_sensors: miscellaneous cleanup	2018-10-21 15:33:36 +01:00
counter	iio: 104-quad-8: Provide defines for magic numbers	2018-06-10 11:52:30 +01:00
dac	iio:dac:ti-dac7311 Add driver for Texas Instrument DAC7311	2018-11-11 15:29:44 +00:00
dummy	iio:dummy: Add extra paragraphs on Kconfig	2018-03-03 15:20:16 +00:00
frequency	iio: Convert to using %pOFn instead of device_node.name	2018-09-02 18:54:31 +01:00
gyro	iio: Replace occurrences of magic number 0 by IIO_CHAN_INFO_RAW	2018-03-07 20:14:36 +00:00
health	iio: health: max30102: Mark expected switch fall-throughs	2018-08-19 17:21:35 +01:00
humidity	iio: add SPDX identifier for various drivers	2018-02-18 11:55:19 +00:00
imu	Merge 4.19-rc4 into staging-next	2018-09-16 22:04:13 +02:00
light	iio: light: Add support for vishay vcnl4035	2018-11-16 18:32:29 +00:00
magnetometer	iio: magnetometer: Add driver support for PNI RM3100	2018-11-16 18:32:31 +00:00
multiplexer	iio: multiplexer: switch to SPDX license identifier	2018-08-20 19:28:26 +01:00
orientation	iio:orientation: drop assign iio_info.driver_module	2017-08-22 21:33:36 +01:00
potentiometer	iio: potentiometer: tpl0102: add IIO_AVAIL_RANGE support	2018-11-11 15:29:45 +00:00
potentiostat	iio: potentiostat: lmp91000: add LMP91002 support	2018-05-12 11:02:44 +01:00
pressure	iio: pressure: ms5611: switch to SPDX identifier	2018-09-08 15:04:02 +01:00
proximity	iio: proximity: Add driver support for ST's VL53L0X ToF ranging sensor.	2018-09-22 16:42:56 +01:00
resolver	staging: iio: ad2s1200: Move driver out of staging	2018-05-20 12:17:48 +01:00
temperature	First set of IIO fixes for the 4.19 cycle.	2018-09-09 09:33:29 +02:00
trigger	drivers: iio: Update MODULE AUTHOR email address	2018-08-19 17:23:39 +01:00
iio_core_trigger.h
iio_core.h	the rest of drivers/*: annotate ->poll() instances	2017-11-28 11:06:58 -05:00
industrialio-buffer.c	First round of IIO fixes for the 4.16 cycle.	2018-02-20 10:03:22 +01:00
industrialio-configfs.c	iio: make function argument and some structures const	2017-10-19 16:15:24 +02:00
industrialio-core.c	iio: Add modifier for DUV light	2018-07-23 19:18:10 +01:00
industrialio-event.c	vfs: do bulk POLL* -> EPOLL* replacement	2018-02-11 14:34:03 -08:00
industrialio-sw-device.c	iio: make function argument and some structures const	2017-10-19 16:15:24 +02:00
industrialio-sw-trigger.c	iio: make function argument and some structures const	2017-10-19 16:15:24 +02:00
industrialio-trigger.c	iio:trigger: Remove necessity to have a trig->ops structure.	2017-08-22 21:20:28 +01:00
industrialio-triggered-event.c
inkern.c	treewide: kzalloc() -> kcalloc()	2018-06-12 16:19:22 -07:00
Kconfig	staging: iio: ad2s1200: Move driver out of staging	2018-05-20 12:17:48 +01:00
Makefile	staging: iio: ad2s1200: Move driver out of staging	2018-05-20 12:17:48 +01:00