renegade-project/linux-next
2
0
Fork 0
mirror of https://github.com/edk2-porting/linux-next.git synced 2024-12-28 07:04:00 +08:00
Code
11fb06bd8d
linux-next/drivers/media/video/tvp5150.c
Hans Verkuil aecde8b53b V4L/DVB (10141): v4l2: debugging API changed to match against driver name instead of ID. 
Since the i2c driver ID will be removed in the near future we have to
modify the v4l2 debugging API to use the driver name instead of driver ID.

Note that this API is not used in applications other than v4l2-dbg.cpp
as it is for debugging and testing only.

Should anyone use the old VIDIOC_G_CHIP_IDENT, then this will be logged
with a warning that it is deprecated and will be removed in 2.6.30.

Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-01-02 17:11:52 -02:00

1136 lines
30 KiB
C
Raw Blame History

/*
* tvp5150 - Texas Instruments TVP5150A/AM1 video decoder driver
*
* Copyright (c) 2005,2006 Mauro Carvalho Chehab (mchehab@infradead.org)
* This code is placed under the terms of the GNU General Public License v2
*/
#include <linux/i2c.h>
#include <linux/videodev2.h>
#include <linux/delay.h>
#include <linux/video_decoder.h>
#include <media/v4l2-device.h>
#include <media/tvp5150.h>
#include <media/v4l2-i2c-drv-legacy.h>
#include <media/v4l2-chip-ident.h>
#include "tvp5150_reg.h"
MODULE_DESCRIPTION("Texas Instruments TVP5150A video decoder driver");
MODULE_AUTHOR("Mauro Carvalho Chehab");
MODULE_LICENSE("GPL");
/* standard i2c insmod options */
static unsigned short normal_i2c[] = {
0xb8 >> 1,
0xba >> 1,
I2C_CLIENT_END
};
I2C_CLIENT_INSMOD;
static int debug;
module_param(debug, int, 0);
MODULE_PARM_DESC(debug, "Debug level (0-2)");
/* supported controls */
static struct v4l2_queryctrl tvp5150_qctrl[] = {
{
.id = V4L2_CID_BRIGHTNESS,
.type = V4L2_CTRL_TYPE_INTEGER,
.name = "Brightness",
.minimum = 0,
.maximum = 255,
.step = 1,
.default_value = 128,
.flags = 0,
}, {
.id = V4L2_CID_CONTRAST,
.type = V4L2_CTRL_TYPE_INTEGER,
.name = "Contrast",
.minimum = 0,
.maximum = 255,
.step = 0x1,
.default_value = 128,
.flags = 0,
}, {
.id = V4L2_CID_SATURATION,
.type = V4L2_CTRL_TYPE_INTEGER,
.name = "Saturation",
.minimum = 0,
.maximum = 255,
.step = 0x1,
.default_value = 128,
.flags = 0,
}, {
.id = V4L2_CID_HUE,
.type = V4L2_CTRL_TYPE_INTEGER,
.name = "Hue",
.minimum = -128,
.maximum = 127,
.step = 0x1,
.default_value = 0,
.flags = 0,
}
};
struct tvp5150 {
struct v4l2_subdev sd;
v4l2_std_id norm; /* Current set standard */
struct v4l2_routing route;
int enable;
int bright;
int contrast;
int hue;
int sat;
};
static inline struct tvp5150 *to_tvp5150(struct v4l2_subdev *sd)
{
return container_of(sd, struct tvp5150, sd);
}
static int tvp5150_read(struct v4l2_subdev *sd, unsigned char addr)
{
struct i2c_client *c = v4l2_get_subdevdata(sd);
unsigned char buffer[1];
int rc;
buffer[0] = addr;
if (1 != (rc = i2c_master_send(c, buffer, 1)))
v4l2_dbg(0, debug, sd, "i2c i/o error: rc == %d (should be 1)\n", rc);
msleep(10);
if (1 != (rc = i2c_master_recv(c, buffer, 1)))
v4l2_dbg(0, debug, sd, "i2c i/o error: rc == %d (should be 1)\n", rc);
v4l2_dbg(2, debug, sd, "tvp5150: read 0x%02x = 0x%02x\n", addr, buffer[0]);
return (buffer[0]);
}
static inline void tvp5150_write(struct v4l2_subdev *sd, unsigned char addr,
unsigned char value)
{
struct i2c_client *c = v4l2_get_subdevdata(sd);
unsigned char buffer[2];
int rc;
buffer[0] = addr;
buffer[1] = value;
v4l2_dbg(2, debug, sd, "tvp5150: writing 0x%02x 0x%02x\n", buffer[0], buffer[1]);
if (2 != (rc = i2c_master_send(c, buffer, 2)))
v4l2_dbg(0, debug, sd, "i2c i/o error: rc == %d (should be 2)\n", rc);
}
static void dump_reg_range(struct v4l2_subdev *sd, char *s, u8 init,
const u8 end, int max_line)
{
int i = 0;
while (init != (u8)(end + 1)) {
if ((i % max_line) == 0) {
if (i > 0)
printk("\n");
printk("tvp5150: %s reg 0x%02x = ", s, init);
}
printk("%02x ", tvp5150_read(sd, init));
init++;
i++;
}
printk("\n");
}
static int tvp5150_log_status(struct v4l2_subdev *sd)
{
printk("tvp5150: Video input source selection #1 = 0x%02x\n",
tvp5150_read(sd, TVP5150_VD_IN_SRC_SEL_1));
printk("tvp5150: Analog channel controls = 0x%02x\n",
tvp5150_read(sd, TVP5150_ANAL_CHL_CTL));
printk("tvp5150: Operation mode controls = 0x%02x\n",
tvp5150_read(sd, TVP5150_OP_MODE_CTL));
printk("tvp5150: Miscellaneous controls = 0x%02x\n",
tvp5150_read(sd, TVP5150_MISC_CTL));
printk("tvp5150: Autoswitch mask= 0x%02x\n",
tvp5150_read(sd, TVP5150_AUTOSW_MSK));
printk("tvp5150: Color killer threshold control = 0x%02x\n",
tvp5150_read(sd, TVP5150_COLOR_KIL_THSH_CTL));
printk("tvp5150: Luminance processing controls #1 #2 and #3 = %02x %02x %02x\n",
tvp5150_read(sd, TVP5150_LUMA_PROC_CTL_1),
tvp5150_read(sd, TVP5150_LUMA_PROC_CTL_2),
tvp5150_read(sd, TVP5150_LUMA_PROC_CTL_3));
printk("tvp5150: Brightness control = 0x%02x\n",
tvp5150_read(sd, TVP5150_BRIGHT_CTL));
printk("tvp5150: Color saturation control = 0x%02x\n",
tvp5150_read(sd, TVP5150_SATURATION_CTL));
printk("tvp5150: Hue control = 0x%02x\n",
tvp5150_read(sd, TVP5150_HUE_CTL));
printk("tvp5150: Contrast control = 0x%02x\n",
tvp5150_read(sd, TVP5150_CONTRAST_CTL));
printk("tvp5150: Outputs and data rates select = 0x%02x\n",
tvp5150_read(sd, TVP5150_DATA_RATE_SEL));
printk("tvp5150: Configuration shared pins = 0x%02x\n",
tvp5150_read(sd, TVP5150_CONF_SHARED_PIN));
printk("tvp5150: Active video cropping start = 0x%02x%02x\n",
tvp5150_read(sd, TVP5150_ACT_VD_CROP_ST_MSB),
tvp5150_read(sd, TVP5150_ACT_VD_CROP_ST_LSB));
printk("tvp5150: Active video cropping stop = 0x%02x%02x\n",
tvp5150_read(sd, TVP5150_ACT_VD_CROP_STP_MSB),
tvp5150_read(sd, TVP5150_ACT_VD_CROP_STP_LSB));
printk("tvp5150: Genlock/RTC = 0x%02x\n",
tvp5150_read(sd, TVP5150_GENLOCK));
printk("tvp5150: Horizontal sync start = 0x%02x\n",
tvp5150_read(sd, TVP5150_HORIZ_SYNC_START));
printk("tvp5150: Vertical blanking start = 0x%02x\n",
tvp5150_read(sd, TVP5150_VERT_BLANKING_START));
printk("tvp5150: Vertical blanking stop = 0x%02x\n",
tvp5150_read(sd, TVP5150_VERT_BLANKING_STOP));
printk("tvp5150: Chrominance processing control #1 and #2 = %02x %02x\n",
tvp5150_read(sd, TVP5150_CHROMA_PROC_CTL_1),
tvp5150_read(sd, TVP5150_CHROMA_PROC_CTL_2));
printk("tvp5150: Interrupt reset register B = 0x%02x\n",
tvp5150_read(sd, TVP5150_INT_RESET_REG_B));
printk("tvp5150: Interrupt enable register B = 0x%02x\n",
tvp5150_read(sd, TVP5150_INT_ENABLE_REG_B));
printk("tvp5150: Interrupt configuration register B = 0x%02x\n",
tvp5150_read(sd, TVP5150_INTT_CONFIG_REG_B));
printk("tvp5150: Video standard = 0x%02x\n",
tvp5150_read(sd, TVP5150_VIDEO_STD));
printk("tvp5150: Chroma gain factor: Cb=0x%02x Cr=0x%02x\n",
tvp5150_read(sd, TVP5150_CB_GAIN_FACT),
tvp5150_read(sd, TVP5150_CR_GAIN_FACTOR));
printk("tvp5150: Macrovision on counter = 0x%02x\n",
tvp5150_read(sd, TVP5150_MACROVISION_ON_CTR));
printk("tvp5150: Macrovision off counter = 0x%02x\n",
tvp5150_read(sd, TVP5150_MACROVISION_OFF_CTR));
printk("tvp5150: ITU-R BT.656.%d timing(TVP5150AM1 only)\n",
(tvp5150_read(sd, TVP5150_REV_SELECT) & 1) ? 3 : 4);
printk("tvp5150: Device ID = %02x%02x\n",
tvp5150_read(sd, TVP5150_MSB_DEV_ID),
tvp5150_read(sd, TVP5150_LSB_DEV_ID));
printk("tvp5150: ROM version = (hex) %02x.%02x\n",
tvp5150_read(sd, TVP5150_ROM_MAJOR_VER),
tvp5150_read(sd, TVP5150_ROM_MINOR_VER));
printk("tvp5150: Vertical line count = 0x%02x%02x\n",
tvp5150_read(sd, TVP5150_VERT_LN_COUNT_MSB),
tvp5150_read(sd, TVP5150_VERT_LN_COUNT_LSB));
printk("tvp5150: Interrupt status register B = 0x%02x\n",
tvp5150_read(sd, TVP5150_INT_STATUS_REG_B));
printk("tvp5150: Interrupt active register B = 0x%02x\n",
tvp5150_read(sd, TVP5150_INT_ACTIVE_REG_B));
printk("tvp5150: Status regs #1 to #5 = %02x %02x %02x %02x %02x\n",
tvp5150_read(sd, TVP5150_STATUS_REG_1),
tvp5150_read(sd, TVP5150_STATUS_REG_2),
tvp5150_read(sd, TVP5150_STATUS_REG_3),
tvp5150_read(sd, TVP5150_STATUS_REG_4),
tvp5150_read(sd, TVP5150_STATUS_REG_5));
dump_reg_range(sd, "Teletext filter 1", TVP5150_TELETEXT_FIL1_INI,
TVP5150_TELETEXT_FIL1_END, 8);
dump_reg_range(sd, "Teletext filter 2", TVP5150_TELETEXT_FIL2_INI,
TVP5150_TELETEXT_FIL2_END, 8);
printk("tvp5150: Teletext filter enable = 0x%02x\n",
tvp5150_read(sd, TVP5150_TELETEXT_FIL_ENA));
printk("tvp5150: Interrupt status register A = 0x%02x\n",
tvp5150_read(sd, TVP5150_INT_STATUS_REG_A));
printk("tvp5150: Interrupt enable register A = 0x%02x\n",
tvp5150_read(sd, TVP5150_INT_ENABLE_REG_A));
printk("tvp5150: Interrupt configuration = 0x%02x\n",
tvp5150_read(sd, TVP5150_INT_CONF));
printk("tvp5150: VDP status register = 0x%02x\n",
tvp5150_read(sd, TVP5150_VDP_STATUS_REG));
printk("tvp5150: FIFO word count = 0x%02x\n",
tvp5150_read(sd, TVP5150_FIFO_WORD_COUNT));
printk("tvp5150: FIFO interrupt threshold = 0x%02x\n",
tvp5150_read(sd, TVP5150_FIFO_INT_THRESHOLD));
printk("tvp5150: FIFO reset = 0x%02x\n",
tvp5150_read(sd, TVP5150_FIFO_RESET));
printk("tvp5150: Line number interrupt = 0x%02x\n",
tvp5150_read(sd, TVP5150_LINE_NUMBER_INT));
printk("tvp5150: Pixel alignment register = 0x%02x%02x\n",
tvp5150_read(sd, TVP5150_PIX_ALIGN_REG_HIGH),
tvp5150_read(sd, TVP5150_PIX_ALIGN_REG_LOW));
printk("tvp5150: FIFO output control = 0x%02x\n",
tvp5150_read(sd, TVP5150_FIFO_OUT_CTRL));
printk("tvp5150: Full field enable = 0x%02x\n",
tvp5150_read(sd, TVP5150_FULL_FIELD_ENA));
printk("tvp5150: Full field mode register = 0x%02x\n",
tvp5150_read(sd, TVP5150_FULL_FIELD_MODE_REG));
dump_reg_range(sd, "CC data", TVP5150_CC_DATA_INI,
TVP5150_CC_DATA_END, 8);
dump_reg_range(sd, "WSS data", TVP5150_WSS_DATA_INI,
TVP5150_WSS_DATA_END, 8);
dump_reg_range(sd, "VPS data", TVP5150_VPS_DATA_INI,
TVP5150_VPS_DATA_END, 8);
dump_reg_range(sd, "VITC data", TVP5150_VITC_DATA_INI,
TVP5150_VITC_DATA_END, 10);
dump_reg_range(sd, "Line mode", TVP5150_LINE_MODE_INI,
TVP5150_LINE_MODE_END, 8);
return 0;
}
/****************************************************************************
Basic functions
****************************************************************************/
static inline void tvp5150_selmux(struct v4l2_subdev *sd)
{
int opmode=0;
struct tvp5150 *decoder = to_tvp5150(sd);
int input = 0;
unsigned char val;
if ((decoder->route.output & TVP5150_BLACK_SCREEN) || !decoder->enable)
input = 8;
switch (decoder->route.input) {
case TVP5150_COMPOSITE1:
input |= 2;
/* fall through */
case TVP5150_COMPOSITE0:
opmode=0x30; /* TV Mode */
break;
case TVP5150_SVIDEO:
default:
input |= 1;
opmode=0; /* Auto Mode */
break;
}
v4l2_dbg(1, debug, sd, "Selecting video route: route input=%i, output=%i "
"=> tvp5150 input=%i, opmode=%i\n",
decoder->route.input,decoder->route.output,
input, opmode );
tvp5150_write(sd, TVP5150_OP_MODE_CTL, opmode);
tvp5150_write(sd, TVP5150_VD_IN_SRC_SEL_1, input);
/* Svideo should enable YCrCb output and disable GPCL output
* For Composite and TV, it should be the reverse
*/
val = tvp5150_read(sd, TVP5150_MISC_CTL);
if (decoder->route.input == TVP5150_SVIDEO)
val = (val & ~0x40) | 0x10;
else
val = (val & ~0x10) | 0x40;
tvp5150_write(sd, TVP5150_MISC_CTL, val);
};
struct i2c_reg_value {
unsigned char reg;
unsigned char value;
};
/* Default values as sugested at TVP5150AM1 datasheet */
static const struct i2c_reg_value tvp5150_init_default[] = {
{ /* 0x00 */
TVP5150_VD_IN_SRC_SEL_1,0x00
},
{ /* 0x01 */
TVP5150_ANAL_CHL_CTL,0x15
},
{ /* 0x02 */
TVP5150_OP_MODE_CTL,0x00
},
{ /* 0x03 */
TVP5150_MISC_CTL,0x01
},
{ /* 0x06 */
TVP5150_COLOR_KIL_THSH_CTL,0x10
},
{ /* 0x07 */
TVP5150_LUMA_PROC_CTL_1,0x60
},
{ /* 0x08 */
TVP5150_LUMA_PROC_CTL_2,0x00
},
{ /* 0x09 */
TVP5150_BRIGHT_CTL,0x80
},
{ /* 0x0a */
TVP5150_SATURATION_CTL,0x80
},
{ /* 0x0b */
TVP5150_HUE_CTL,0x00
},
{ /* 0x0c */
TVP5150_CONTRAST_CTL,0x80
},
{ /* 0x0d */
TVP5150_DATA_RATE_SEL,0x47
},
{ /* 0x0e */
TVP5150_LUMA_PROC_CTL_3,0x00
},
{ /* 0x0f */
TVP5150_CONF_SHARED_PIN,0x08
},
{ /* 0x11 */
TVP5150_ACT_VD_CROP_ST_MSB,0x00
},
{ /* 0x12 */
TVP5150_ACT_VD_CROP_ST_LSB,0x00
},
{ /* 0x13 */
TVP5150_ACT_VD_CROP_STP_MSB,0x00
},
{ /* 0x14 */
TVP5150_ACT_VD_CROP_STP_LSB,0x00
},
{ /* 0x15 */
TVP5150_GENLOCK,0x01
},
{ /* 0x16 */
TVP5150_HORIZ_SYNC_START,0x80
},
{ /* 0x18 */
TVP5150_VERT_BLANKING_START,0x00
},
{ /* 0x19 */
TVP5150_VERT_BLANKING_STOP,0x00
},
{ /* 0x1a */
TVP5150_CHROMA_PROC_CTL_1,0x0c
},
{ /* 0x1b */
TVP5150_CHROMA_PROC_CTL_2,0x14
},
{ /* 0x1c */
TVP5150_INT_RESET_REG_B,0x00
},
{ /* 0x1d */
TVP5150_INT_ENABLE_REG_B,0x00
},
{ /* 0x1e */
TVP5150_INTT_CONFIG_REG_B,0x00
},
{ /* 0x28 */
TVP5150_VIDEO_STD,0x00
},
{ /* 0x2e */
TVP5150_MACROVISION_ON_CTR,0x0f
},
{ /* 0x2f */
TVP5150_MACROVISION_OFF_CTR,0x01
},
{ /* 0xbb */
TVP5150_TELETEXT_FIL_ENA,0x00
},
{ /* 0xc0 */
TVP5150_INT_STATUS_REG_A,0x00
},
{ /* 0xc1 */
TVP5150_INT_ENABLE_REG_A,0x00
},
{ /* 0xc2 */
TVP5150_INT_CONF,0x04
},
{ /* 0xc8 */
TVP5150_FIFO_INT_THRESHOLD,0x80
},
{ /* 0xc9 */
TVP5150_FIFO_RESET,0x00
},
{ /* 0xca */
TVP5150_LINE_NUMBER_INT,0x00
},
{ /* 0xcb */
TVP5150_PIX_ALIGN_REG_LOW,0x4e
},
{ /* 0xcc */
TVP5150_PIX_ALIGN_REG_HIGH,0x00
},
{ /* 0xcd */
TVP5150_FIFO_OUT_CTRL,0x01
},
{ /* 0xcf */
TVP5150_FULL_FIELD_ENA,0x00
},
{ /* 0xd0 */
TVP5150_LINE_MODE_INI,0x00
},
{ /* 0xfc */
TVP5150_FULL_FIELD_MODE_REG,0x7f
},
{ /* end of data */
0xff,0xff
}
};
/* Default values as sugested at TVP5150AM1 datasheet */
static const struct i2c_reg_value tvp5150_init_enable[] = {
{
TVP5150_CONF_SHARED_PIN, 2
},{ /* Automatic offset and AGC enabled */
TVP5150_ANAL_CHL_CTL, 0x15
},{ /* Activate YCrCb output 0x9 or 0xd ? */
TVP5150_MISC_CTL, 0x6f
},{ /* Activates video std autodetection for all standards */
TVP5150_AUTOSW_MSK, 0x0
},{ /* Default format: 0x47. For 4:2:2: 0x40 */
TVP5150_DATA_RATE_SEL, 0x47
},{
TVP5150_CHROMA_PROC_CTL_1, 0x0c
},{
TVP5150_CHROMA_PROC_CTL_2, 0x54
},{ /* Non documented, but initialized on WinTV USB2 */
0x27, 0x20
},{
0xff,0xff
}
};
struct tvp5150_vbi_type {
unsigned int vbi_type;
unsigned int ini_line;
unsigned int end_line;
unsigned int by_field :1;
};
struct i2c_vbi_ram_value {
u16 reg;
struct tvp5150_vbi_type type;
unsigned char values[16];
};
/* This struct have the values for each supported VBI Standard
* by
tvp5150_vbi_types should follow the same order as vbi_ram_default
* value 0 means rom position 0x10, value 1 means rom position 0x30
* and so on. There are 16 possible locations from 0 to 15.
*/
static struct i2c_vbi_ram_value vbi_ram_default[] =
{
/* FIXME: Current api doesn't handle all VBI types, those not
yet supported are placed under #if 0 */
#if 0
{0x010, /* Teletext, SECAM, WST System A */
{V4L2_SLICED_TELETEXT_SECAM,6,23,1},
{ 0xaa, 0xaa, 0xff, 0xff, 0xe7, 0x2e, 0x20, 0x26,
0xe6, 0xb4, 0x0e, 0x00, 0x00, 0x00, 0x10, 0x00 }
},
#endif
{0x030, /* Teletext, PAL, WST System B */
{V4L2_SLICED_TELETEXT_B,6,22,1},
{ 0xaa, 0xaa, 0xff, 0xff, 0x27, 0x2e, 0x20, 0x2b,
0xa6, 0x72, 0x10, 0x00, 0x00, 0x00, 0x10, 0x00 }
},
#if 0
{0x050, /* Teletext, PAL, WST System C */
{V4L2_SLICED_TELETEXT_PAL_C,6,22,1},
{ 0xaa, 0xaa, 0xff, 0xff, 0xe7, 0x2e, 0x20, 0x22,
0xa6, 0x98, 0x0d, 0x00, 0x00, 0x00, 0x10, 0x00 }
},
{0x070, /* Teletext, NTSC, WST System B */
{V4L2_SLICED_TELETEXT_NTSC_B,10,21,1},
{ 0xaa, 0xaa, 0xff, 0xff, 0x27, 0x2e, 0x20, 0x23,
0x69, 0x93, 0x0d, 0x00, 0x00, 0x00, 0x10, 0x00 }
},
{0x090, /* Tetetext, NTSC NABTS System C */
{V4L2_SLICED_TELETEXT_NTSC_C,10,21,1},
{ 0xaa, 0xaa, 0xff, 0xff, 0xe7, 0x2e, 0x20, 0x22,
0x69, 0x93, 0x0d, 0x00, 0x00, 0x00, 0x15, 0x00 }
},
{0x0b0, /* Teletext, NTSC-J, NABTS System D */
{V4L2_SLICED_TELETEXT_NTSC_D,10,21,1},
{ 0xaa, 0xaa, 0xff, 0xff, 0xa7, 0x2e, 0x20, 0x23,
0x69, 0x93, 0x0d, 0x00, 0x00, 0x00, 0x10, 0x00 }
},
{0x0d0, /* Closed Caption, PAL/SECAM */
{V4L2_SLICED_CAPTION_625,22,22,1},
{ 0xaa, 0x2a, 0xff, 0x3f, 0x04, 0x51, 0x6e, 0x02,
0xa6, 0x7b, 0x09, 0x00, 0x00, 0x00, 0x27, 0x00 }
},
#endif
{0x0f0, /* Closed Caption, NTSC */
{V4L2_SLICED_CAPTION_525,21,21,1},
{ 0xaa, 0x2a, 0xff, 0x3f, 0x04, 0x51, 0x6e, 0x02,
0x69, 0x8c, 0x09, 0x00, 0x00, 0x00, 0x27, 0x00 }
},
{0x110, /* Wide Screen Signal, PAL/SECAM */
{V4L2_SLICED_WSS_625,23,23,1},
{ 0x5b, 0x55, 0xc5, 0xff, 0x00, 0x71, 0x6e, 0x42,
0xa6, 0xcd, 0x0f, 0x00, 0x00, 0x00, 0x3a, 0x00 }
},
#if 0
{0x130, /* Wide Screen Signal, NTSC C */
{V4L2_SLICED_WSS_525,20,20,1},
{ 0x38, 0x00, 0x3f, 0x00, 0x00, 0x71, 0x6e, 0x43,
0x69, 0x7c, 0x08, 0x00, 0x00, 0x00, 0x39, 0x00 }
},
{0x150, /* Vertical Interval Timecode (VITC), PAL/SECAM */
{V4l2_SLICED_VITC_625,6,22,0},
{ 0x00, 0x00, 0x00, 0x00, 0x00, 0x8f, 0x6d, 0x49,
0xa6, 0x85, 0x08, 0x00, 0x00, 0x00, 0x4c, 0x00 }
},
{0x170, /* Vertical Interval Timecode (VITC), NTSC */
{V4l2_SLICED_VITC_525,10,20,0},
{ 0x00, 0x00, 0x00, 0x00, 0x00, 0x8f, 0x6d, 0x49,
0x69, 0x94, 0x08, 0x00, 0x00, 0x00, 0x4c, 0x00 }
},
#endif
{0x190, /* Video Program System (VPS), PAL */
{V4L2_SLICED_VPS,16,16,0},
{ 0xaa, 0xaa, 0xff, 0xff, 0xba, 0xce, 0x2b, 0x0d,
0xa6, 0xda, 0x0b, 0x00, 0x00, 0x00, 0x60, 0x00 }
},
/* 0x1d0 User programmable */
/* End of struct */
{ (u16)-1 }
};
static int tvp5150_write_inittab(struct v4l2_subdev *sd,
const struct i2c_reg_value *regs)
{
while (regs->reg != 0xff) {
tvp5150_write(sd, regs->reg, regs->value);
regs++;
}
return 0;
}
static int tvp5150_vdp_init(struct v4l2_subdev *sd,
const struct i2c_vbi_ram_value *regs)
{
unsigned int i;
/* Disable Full Field */
tvp5150_write(sd, TVP5150_FULL_FIELD_ENA, 0);
/* Before programming, Line mode should be at 0xff */
for (i = TVP5150_LINE_MODE_INI; i <= TVP5150_LINE_MODE_END; i++)
tvp5150_write(sd, i, 0xff);
/* Load Ram Table */
while (regs->reg != (u16)-1) {
tvp5150_write(sd, TVP5150_CONF_RAM_ADDR_HIGH, regs->reg >> 8);
tvp5150_write(sd, TVP5150_CONF_RAM_ADDR_LOW, regs->reg);
for (i = 0; i < 16; i++)
tvp5150_write(sd, TVP5150_VDP_CONF_RAM_DATA, regs->values[i]);
regs++;
}
return 0;
}
/* Fills VBI capabilities based on i2c_vbi_ram_value struct */
static int tvp5150_g_sliced_vbi_cap(struct v4l2_subdev *sd,
struct v4l2_sliced_vbi_cap *cap)
{
const struct i2c_vbi_ram_value *regs = vbi_ram_default;
int line;
v4l2_dbg(1, debug, sd, "VIDIOC_G_SLICED_VBI_CAP\n");
memset(cap, 0, sizeof *cap);
while (regs->reg != (u16)-1 ) {
for (line=regs->type.ini_line;line<=regs->type.end_line;line++) {
cap->service_lines[0][line] |= regs->type.vbi_type;
}
cap->service_set |= regs->type.vbi_type;
regs++;
}
return 0;
}
/* Set vbi processing
* type - one of tvp5150_vbi_types
* line - line to gather data
* fields: bit 0 field1, bit 1, field2
* flags (default=0xf0) is a bitmask, were set means:
* bit 7: enable filtering null bytes on CC
* bit 6: send data also to FIFO
* bit 5: don't allow data with errors on FIFO
* bit 4: enable ECC when possible
* pix_align = pix alignment:
* LSB = field1
* MSB = field2
*/
static int tvp5150_set_vbi(struct v4l2_subdev *sd,
const struct i2c_vbi_ram_value *regs,
unsigned int type,u8 flags, int line,
const int fields)
{
struct tvp5150 *decoder = to_tvp5150(sd);
v4l2_std_id std = decoder->norm;
u8 reg;
int pos=0;
if (std == V4L2_STD_ALL) {
v4l2_err(sd, "VBI can't be configured without knowing number of lines\n");
return 0;
} else if (std & V4L2_STD_625_50) {
/* Don't follow NTSC Line number convension */
line += 3;
}
if (line<6||line>27)
return 0;
while (regs->reg != (u16)-1 ) {
if ((type & regs->type.vbi_type) &&
(line>=regs->type.ini_line) &&
(line<=regs->type.end_line)) {
type=regs->type.vbi_type;
break;
}
regs++;
pos++;
}
if (regs->reg == (u16)-1)
return 0;
type=pos | (flags & 0xf0);
reg=((line-6)<<1)+TVP5150_LINE_MODE_INI;
if (fields&1) {
tvp5150_write(sd, reg, type);
}
if (fields&2) {
tvp5150_write(sd, reg+1, type);
}
return type;
}
static int tvp5150_get_vbi(struct v4l2_subdev *sd,
const struct i2c_vbi_ram_value *regs, int line)
{
struct tvp5150 *decoder = to_tvp5150(sd);
v4l2_std_id std = decoder->norm;
u8 reg;
int pos, type = 0;
if (std == V4L2_STD_ALL) {
v4l2_err(sd, "VBI can't be configured without knowing number of lines\n");
return 0;
} else if (std & V4L2_STD_625_50) {
/* Don't follow NTSC Line number convension */
line += 3;
}
if (line < 6 || line > 27)
return 0;
reg = ((line - 6) << 1) + TVP5150_LINE_MODE_INI;
pos = tvp5150_read(sd, reg) & 0x0f;
if (pos < 0x0f)
type = regs[pos].type.vbi_type;
pos = tvp5150_read(sd, reg + 1) & 0x0f;
if (pos < 0x0f)
type |= regs[pos].type.vbi_type;
return type;
}
static int tvp5150_set_std(struct v4l2_subdev *sd, v4l2_std_id std)
{
struct tvp5150 *decoder = to_tvp5150(sd);
int fmt = 0;
decoder->norm = std;
/* First tests should be against specific std */
if (std == V4L2_STD_ALL) {
fmt = 0; /* Autodetect mode */
} else if (std & V4L2_STD_NTSC_443) {
fmt = 0xa;
} else if (std & V4L2_STD_PAL_M) {
fmt = 0x6;
} else if (std & (V4L2_STD_PAL_N | V4L2_STD_PAL_Nc)) {
fmt = 0x8;
} else {
/* Then, test against generic ones */
if (std & V4L2_STD_NTSC)
fmt = 0x2;
else if (std & V4L2_STD_PAL)
fmt = 0x4;
else if (std & V4L2_STD_SECAM)
fmt = 0xc;
}
v4l2_dbg(1, debug, sd, "Set video std register to %d.\n", fmt);
tvp5150_write(sd, TVP5150_VIDEO_STD, fmt);
return 0;
}
static int tvp5150_s_std(struct v4l2_subdev *sd, v4l2_std_id std)
{
struct tvp5150 *decoder = to_tvp5150(sd);
if (decoder->norm == std)
return 0;
return tvp5150_set_std(sd, std);
}
static int tvp5150_reset(struct v4l2_subdev *sd, u32 val)
{
struct tvp5150 *decoder = to_tvp5150(sd);
u8 msb_id, lsb_id, msb_rom, lsb_rom;
msb_id = tvp5150_read(sd, TVP5150_MSB_DEV_ID);
lsb_id = tvp5150_read(sd, TVP5150_LSB_DEV_ID);
msb_rom = tvp5150_read(sd, TVP5150_ROM_MAJOR_VER);
lsb_rom = tvp5150_read(sd, TVP5150_ROM_MINOR_VER);
if (msb_rom == 4 && lsb_rom == 0) { /* Is TVP5150AM1 */
v4l2_info(sd, "tvp%02x%02xam1 detected.\n", msb_id, lsb_id);
/* ITU-T BT.656.4 timing */
tvp5150_write(sd, TVP5150_REV_SELECT, 0);
} else {
if (msb_rom == 3 || lsb_rom == 0x21) { /* Is TVP5150A */
v4l2_info(sd, "tvp%02x%02xa detected.\n", msb_id, lsb_id);
} else {
v4l2_info(sd, "*** unknown tvp%02x%02x chip detected.\n",
msb_id, lsb_id);
v4l2_info(sd, "*** Rom ver is %d.%d\n", msb_rom, lsb_rom);
}
}
/* Initializes TVP5150 to its default values */
tvp5150_write_inittab(sd, tvp5150_init_default);
/* Initializes VDP registers */
tvp5150_vdp_init(sd, vbi_ram_default);
/* Selects decoder input */
tvp5150_selmux(sd);
/* Initializes TVP5150 to stream enabled values */
tvp5150_write_inittab(sd, tvp5150_init_enable);
/* Initialize image preferences */
tvp5150_write(sd, TVP5150_BRIGHT_CTL, decoder->bright);
tvp5150_write(sd, TVP5150_CONTRAST_CTL, decoder->contrast);
tvp5150_write(sd, TVP5150_SATURATION_CTL, decoder->contrast);
tvp5150_write(sd, TVP5150_HUE_CTL, decoder->hue);
tvp5150_set_std(sd, decoder->norm);
return 0;
};
static int tvp5150_g_ctrl(struct v4l2_subdev *sd, struct v4l2_control *ctrl)
{
v4l2_dbg(1, debug, sd, "VIDIOC_G_CTRL called\n");
switch (ctrl->id) {
case V4L2_CID_BRIGHTNESS:
ctrl->value = tvp5150_read(sd, TVP5150_BRIGHT_CTL);
return 0;
case V4L2_CID_CONTRAST:
ctrl->value = tvp5150_read(sd, TVP5150_CONTRAST_CTL);
return 0;
case V4L2_CID_SATURATION:
ctrl->value = tvp5150_read(sd, TVP5150_SATURATION_CTL);
return 0;
case V4L2_CID_HUE:
ctrl->value = tvp5150_read(sd, TVP5150_HUE_CTL);
return 0;
}
return -EINVAL;
}
static int tvp5150_s_ctrl(struct v4l2_subdev *sd, struct v4l2_control *ctrl)
{
u8 i, n;
n = ARRAY_SIZE(tvp5150_qctrl);
for (i = 0; i < n; i++) {
if (ctrl->id != tvp5150_qctrl[i].id)
continue;
if (ctrl->value < tvp5150_qctrl[i].minimum ||
ctrl->value > tvp5150_qctrl[i].maximum)
return -ERANGE;
v4l2_dbg(1, debug, sd, "VIDIOC_S_CTRL: id=%d, value=%d\n",
ctrl->id, ctrl->value);
break;
}
switch (ctrl->id) {
case V4L2_CID_BRIGHTNESS:
tvp5150_write(sd, TVP5150_BRIGHT_CTL, ctrl->value);
return 0;
case V4L2_CID_CONTRAST:
tvp5150_write(sd, TVP5150_CONTRAST_CTL, ctrl->value);
return 0;
case V4L2_CID_SATURATION:
tvp5150_write(sd, TVP5150_SATURATION_CTL, ctrl->value);
return 0;
case V4L2_CID_HUE:
tvp5150_write(sd, TVP5150_HUE_CTL, ctrl->value);
return 0;
}
return -EINVAL;
}
/****************************************************************************
I2C Command
****************************************************************************/
static int tvp5150_s_routing(struct v4l2_subdev *sd, const struct v4l2_routing *route)
{
struct tvp5150 *decoder = to_tvp5150(sd);
decoder->route = *route;
tvp5150_selmux(sd);
return 0;
}
static int tvp5150_s_fmt(struct v4l2_subdev *sd, struct v4l2_format *fmt)
{
struct v4l2_sliced_vbi_format *svbi;
int i;
/* raw vbi */
if (fmt->type == V4L2_BUF_TYPE_VBI_CAPTURE) {
/* this is for capturing 36 raw vbi lines
if there's a way to cut off the beginning 2 vbi lines
with the tvp5150 then the vbi line count could be lowered
to 17 lines/field again, although I couldn't find a register
which could do that cropping */
if (fmt->fmt.vbi.sample_format == V4L2_PIX_FMT_GREY)
tvp5150_write(sd, TVP5150_LUMA_PROC_CTL_1, 0x70);
if (fmt->fmt.vbi.count[0] == 18 && fmt->fmt.vbi.count[1] == 18) {
tvp5150_write(sd, TVP5150_VERT_BLANKING_START, 0x00);
tvp5150_write(sd, TVP5150_VERT_BLANKING_STOP, 0x01);
}
return 0;
}
if (fmt->type != V4L2_BUF_TYPE_SLICED_VBI_CAPTURE)
return -EINVAL;
svbi = &fmt->fmt.sliced;
if (svbi->service_set != 0) {
for (i = 0; i <= 23; i++) {
svbi->service_lines[1][i] = 0;
svbi->service_lines[0][i] =
tvp5150_set_vbi(sd, vbi_ram_default,
svbi->service_lines[0][i], 0xf0, i, 3);
}
/* Enables FIFO */
tvp5150_write(sd, TVP5150_FIFO_OUT_CTRL, 1);
} else {
/* Disables FIFO*/
tvp5150_write(sd, TVP5150_FIFO_OUT_CTRL, 0);
/* Disable Full Field */
tvp5150_write(sd, TVP5150_FULL_FIELD_ENA, 0);
/* Disable Line modes */
for (i = TVP5150_LINE_MODE_INI; i <= TVP5150_LINE_MODE_END; i++)
tvp5150_write(sd, i, 0xff);
}
return 0;
}
static int tvp5150_g_fmt(struct v4l2_subdev *sd, struct v4l2_format *fmt)
{
struct v4l2_sliced_vbi_format *svbi;
int i, mask = 0;
if (fmt->type != V4L2_BUF_TYPE_SLICED_VBI_CAPTURE)
return -EINVAL;
svbi = &fmt->fmt.sliced;
memset(svbi, 0, sizeof(*svbi));
for (i = 0; i <= 23; i++) {
svbi->service_lines[0][i] =
tvp5150_get_vbi(sd, vbi_ram_default, i);
mask |= svbi->service_lines[0][i];
}
svbi->service_set = mask;
return 0;
}
static int tvp5150_g_chip_ident(struct v4l2_subdev *sd,
struct v4l2_dbg_chip_ident *chip)
{
int rev;
struct i2c_client *client = v4l2_get_subdevdata(sd);
rev = tvp5150_read(sd, TVP5150_ROM_MAJOR_VER) << 8 |
tvp5150_read(sd, TVP5150_ROM_MINOR_VER);
return v4l2_chip_ident_i2c_client(client, chip, V4L2_IDENT_TVP5150,
rev);
}
#ifdef CONFIG_VIDEO_ADV_DEBUG
static int tvp5150_g_register(struct v4l2_subdev *sd, struct v4l2_dbg_register *reg)
{
struct i2c_client *client = v4l2_get_subdevdata(sd);
if (!v4l2_chip_match_i2c_client(client, &reg->match))
return -EINVAL;
if (!capable(CAP_SYS_ADMIN))
return -EPERM;
reg->val = tvp5150_read(sd, reg->reg & 0xff);
reg->size = 1;
return 0;
}
static int tvp5150_s_register(struct v4l2_subdev *sd, struct v4l2_dbg_register *reg)
{
struct i2c_client *client = v4l2_get_subdevdata(sd);
if (!v4l2_chip_match_i2c_client(client, &reg->match))
return -EINVAL;
if (!capable(CAP_SYS_ADMIN))
return -EPERM;
tvp5150_write(sd, reg->reg & 0xff, reg->val & 0xff);
return 0;
}
#endif
static int tvp5150_g_tuner(struct v4l2_subdev *sd, struct v4l2_tuner *vt)
{
int status = tvp5150_read(sd, 0x88);
vt->signal = ((status & 0x04) && (status & 0x02)) ? 0xffff : 0x0;
return 0;
}
static int tvp5150_queryctrl(struct v4l2_subdev *sd, struct v4l2_queryctrl *qc)
{
int i;
v4l2_dbg(1, debug, sd, "VIDIOC_QUERYCTRL called\n");
for (i = 0; i < ARRAY_SIZE(tvp5150_qctrl); i++)
if (qc->id && qc->id == tvp5150_qctrl[i].id) {
memcpy(qc, &(tvp5150_qctrl[i]),
sizeof(*qc));
return 0;
}
return -EINVAL;
}
static int tvp5150_command(struct i2c_client *client, unsigned cmd, void *arg)
{
return v4l2_subdev_command(i2c_get_clientdata(client), cmd, arg);
}
/* ----------------------------------------------------------------------- */
static const struct v4l2_subdev_core_ops tvp5150_core_ops = {
.log_status = tvp5150_log_status,
.g_ctrl = tvp5150_g_ctrl,
.s_ctrl = tvp5150_s_ctrl,
.queryctrl = tvp5150_queryctrl,
.reset = tvp5150_reset,
.g_chip_ident = tvp5150_g_chip_ident,
#ifdef CONFIG_VIDEO_ADV_DEBUG
.g_register = tvp5150_g_register,
.s_register = tvp5150_s_register,
#endif
};
static const struct v4l2_subdev_tuner_ops tvp5150_tuner_ops = {
.s_std = tvp5150_s_std,
.g_tuner = tvp5150_g_tuner,
};
static const struct v4l2_subdev_video_ops tvp5150_video_ops = {
.s_routing = tvp5150_s_routing,
.g_fmt = tvp5150_g_fmt,
.s_fmt = tvp5150_s_fmt,
.g_sliced_vbi_cap = tvp5150_g_sliced_vbi_cap,
};
static const struct v4l2_subdev_ops tvp5150_ops = {
.core = &tvp5150_core_ops,
.tuner = &tvp5150_tuner_ops,
.video = &tvp5150_video_ops,
};
/****************************************************************************
I2C Client & Driver
****************************************************************************/
static int tvp5150_probe(struct i2c_client *c,
const struct i2c_device_id *id)
{
struct tvp5150 *core;
struct v4l2_subdev *sd;
/* Check if the adapter supports the needed features */
if (!i2c_check_functionality(c->adapter,
I2C_FUNC_SMBUS_READ_BYTE | I2C_FUNC_SMBUS_WRITE_BYTE_DATA))
return -EIO;
core = kzalloc(sizeof(struct tvp5150), GFP_KERNEL);
if (!core) {
return -ENOMEM;
}
sd = &core->sd;
v4l2_i2c_subdev_init(sd, c, &tvp5150_ops);
v4l_info(c, "chip found @ 0x%02x (%s)\n",
c->addr << 1, c->adapter->name);
core->norm = V4L2_STD_ALL; /* Default is autodetect */
core->route.input = TVP5150_COMPOSITE1;
core->enable = 1;
core->bright = 128;
core->contrast = 128;
core->hue = 0;
core->sat = 128;
if (debug > 1)
tvp5150_log_status(sd);
return 0;
}
static int tvp5150_remove(struct i2c_client *c)
{
struct v4l2_subdev *sd = i2c_get_clientdata(c);
v4l2_dbg(1, debug, sd,
"tvp5150.c: removing tvp5150 adapter on address 0x%x\n",
c->addr << 1);
v4l2_device_unregister_subdev(sd);
kfree(to_tvp5150(sd));
return 0;
}
/* ----------------------------------------------------------------------- */
static const struct i2c_device_id tvp5150_id[] = {
{ "tvp5150", 0 },
{ }
};
MODULE_DEVICE_TABLE(i2c, tvp5150_id);
static struct v4l2_i2c_driver_data v4l2_i2c_data = {
.name = "tvp5150",
.driverid = I2C_DRIVERID_TVP5150,
.command = tvp5150_command,
.probe = tvp5150_probe,
.remove = tvp5150_remove,
.legacy_class = I2C_CLASS_TV_ANALOG | I2C_CLASS_TV_DIGITAL,
.id_table = tvp5150_id,
};
View Git Blame Copy Permalink