renegade-project/linux-next
2
0
Fork 0
mirror of https://github.com/edk2-porting/linux-next.git synced 2024-12-21 11:44:01 +08:00
Code
11801e9de2
linux-next/arch/arm/mach-shmobile/board-kzm9g.c
Linus Torvalds 11801e9de2 ARM: soc: soc-specific updates 
Most notable here is probably the addition of basic support for the
 BCM2835, an SoC used in some of the Roku 2 players as well as the
 much-hyped Raspberry Pi, cleaned up and contributed by Stephen
 Warren. It's still early days on mainline support, with just the
 basics working. But it has to start somewhere!
 
 Beyond that there's some conversions of clock infrastructure on tegra
 to common clock, misc updates for several other platforms, and OMAP
 now has its own bus (under drivers/bus) to manage its devices through.
 
 This branch adds two new directories outside of arch/arm:
 drivers/irqchip for new irq controllers, and drivers/bus for the above
 OMAP bus. It's expected that some of the other platforms will migrate
 parts of their platforms to those directories over time as well.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.11 (GNU/Linux)
 
 iQIcBAABAgAGBQJQaO2SAAoJEIwa5zzehBx3TBIQAJYc+vpAqiv8MLQ1XV3cLiIP
 X57fxM9u1A+uXpXsiCTGR+ga8W4a5tlfGMXDBnl/K2bnFs2x11b9NkFLDJ7mdkih
 J4c/iOWT/mT5suLnnybyg6ZGaxGkAKou2AumiSmkazmq5hGG67hkpAOqFEfDK0J2
 Au7/6VN6GZXgiwt8nYaAB/qR5NVcww4m/6GQ2looaWgRLT/wgC3W2ZKvw6zEdl2J
 OxOpwf2ujG/75zLQaxTeZ5rKnGtAXH4v0KhY9CWQacQPi4L2MVCrvUrDB4j0as4H
 Wmsu7g6fZA9Vlf1aW/mlDY1ftozfbDaKORoYVS+CsWhm1oiQI5t+sAWRTkbbS85t
 pobgKfFdvNsl9kS1zRdEddK2tyotwtXh2jz+P/s1l95hfqZ8IdVBJNMlcrHRINOI
 2iQXFfGRhCCqMcfFiGXJ43tYja/aCsaIc4M5TrEma57czZT5jK8HSLh0ZUmFYDoe
 /TfUegVhFASmkNTk7dVZgZ2UoQVkv4lWs+xuf8YgX3UalWgl/YIRRFl4NnylGlEc
 jjrX3MjXATqXzLPEZaf8dRZHIpB6FYmZq1QqaoefcUQ46gBOueThElZP3sNWR8a2
 MOtknauLfLwQbrcH5CmqKpIpXTB4LKgbf/omH2jQlxBhQ5t7PXHVD1NFsbZbwM8J
 RVCZb4PwqEwOt/wibTrk
 =BCp4
 -----END PGP SIGNATURE-----

Merge tag 'soc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM soc-specific updates from Olof Johansson:
 "Most notable here is probably the addition of basic support for the
  BCM2835, an SoC used in some of the Roku 2 players as well as the
  much-hyped Raspberry Pi, cleaned up and contributed by Stephen Warren.
  It's still early days on mainline support, with just the basics
  working.  But it has to start somewhere!

  Beyond that there's some conversions of clock infrastructure on tegra
  to common clock, misc updates for several other platforms, and OMAP
  now has its own bus (under drivers/bus) to manage its devices through.

  This branch adds two new directories outside of arch/arm:
  drivers/irqchip for new irq controllers, and drivers/bus for the above
  OMAP bus.  It's expected that some of the other platforms will migrate
  parts of their platforms to those directories over time as well."

Fix up trivial conflicts with the clk infrastructure changes.

* tag 'soc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (62 commits)
  ARM: shmobile: add new __iomem annotation for new code
  ARM: LPC32xx: Support GPI 28
  ARM: LPC32xx: Platform update for devicetree completion of spi-pl022
  ARM: LPC32xx: Board cleanup
  irqchip: fill in empty Kconfig
  ARM: SAMSUNG: Add check for NULL in clock interface
  ARM: EXYNOS: Put PCM, Slimbus, Spdif clocks to off state
  ARM: EXYNOS: Add bus clock for FIMD
  ARM: SAMSUNG: Fix HDMI related warnings
  ARM: S3C24XX: Add .get_rate callback for "camif-upll" clock
  ARM: EXYNOS: Fix incorrect help text
  ARM: EXYNOS: Turn off clocks for NAND, OneNAND and TSI controllers
  ARM: OMAP: AM33xx hwmod: fixup SPI after platform_data move
  MAINTAINERS: add an entry for the BCM2835 ARM sub-architecture
  ARM: bcm2835: instantiate console UART
  ARM: bcm2835: add stub clock driver
  ARM: bcm2835: add system timer
  ARM: bcm2835: add interrupt controller driver
  ARM: add infra-structure for BCM2835 and Raspberry Pi
  ARM: tegra20: add CPU hotplug support
  ...
2012-10-01 18:24:44 -07:00

790 lines
19 KiB
C
Raw Blame History

/*
* KZM-A9-GT board support
*
* Copyright (C) 2012 Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; version 2 of the License.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
*/
#include <linux/delay.h>
#include <linux/gpio.h>
#include <linux/gpio_keys.h>
#include <linux/io.h>
#include <linux/irq.h>
#include <linux/i2c.h>
#include <linux/i2c/pcf857x.h>
#include <linux/input.h>
#include <linux/mmc/host.h>
#include <linux/mmc/sh_mmcif.h>
#include <linux/mmc/sh_mobile_sdhi.h>
#include <linux/mfd/tmio.h>
#include <linux/platform_device.h>
#include <linux/regulator/fixed.h>
#include <linux/regulator/machine.h>
#include <linux/smsc911x.h>
#include <linux/usb/r8a66597.h>
#include <linux/usb/renesas_usbhs.h>
#include <linux/videodev2.h>
#include <sound/sh_fsi.h>
#include <sound/simple_card.h>
#include <mach/irqs.h>
#include <mach/sh73a0.h>
#include <mach/common.h>
#include <asm/hardware/cache-l2x0.h>
#include <asm/hardware/gic.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <video/sh_mobile_lcdc.h>
/*
* external GPIO
*/
#define GPIO_PCF8575_BASE (GPIO_NR)
#define GPIO_PCF8575_PORT10 (GPIO_NR + 8)
#define GPIO_PCF8575_PORT11 (GPIO_NR + 9)
#define GPIO_PCF8575_PORT12 (GPIO_NR + 10)
#define GPIO_PCF8575_PORT13 (GPIO_NR + 11)
#define GPIO_PCF8575_PORT14 (GPIO_NR + 12)
#define GPIO_PCF8575_PORT15 (GPIO_NR + 13)
#define GPIO_PCF8575_PORT16 (GPIO_NR + 14)
/* Dummy supplies, where voltage doesn't matter */
static struct regulator_consumer_supply dummy_supplies[] = {
REGULATOR_SUPPLY("vddvario", "smsc911x"),
REGULATOR_SUPPLY("vdd33a", "smsc911x"),
};
/*
* FSI-AK4648
*
* this command is required when playback.
*
* # amixer set "LINEOUT Mixer DACL" on
*/
/* SMSC 9221 */
static struct resource smsc9221_resources[] = {
[0] = {
.start = 0x10000000, /* CS4 */
.end = 0x100000ff,
.flags = IORESOURCE_MEM,
},
[1] = {
.start = intcs_evt2irq(0x260), /* IRQ3 */
.flags = IORESOURCE_IRQ,
},
};
static struct smsc911x_platform_config smsc9221_platdata = {
.flags = SMSC911X_USE_32BIT | SMSC911X_SAVE_MAC_ADDRESS,
.phy_interface = PHY_INTERFACE_MODE_MII,
.irq_polarity = SMSC911X_IRQ_POLARITY_ACTIVE_LOW,
.irq_type = SMSC911X_IRQ_TYPE_PUSH_PULL,
};
static struct platform_device smsc_device = {
.name = "smsc911x",
.dev = {
.platform_data = &smsc9221_platdata,
},
.resource = smsc9221_resources,
.num_resources = ARRAY_SIZE(smsc9221_resources),
};
/* USB external chip */
static struct r8a66597_platdata usb_host_data = {
.on_chip = 0,
.xtal = R8A66597_PLATDATA_XTAL_48MHZ,
};
static struct resource usb_resources[] = {
[0] = {
.start = 0x10010000,
.end = 0x1001ffff - 1,
.flags = IORESOURCE_MEM,
},
[1] = {
.start = intcs_evt2irq(0x220), /* IRQ1 */
.flags = IORESOURCE_IRQ,
},
};
static struct platform_device usb_host_device = {
.name = "r8a66597_hcd",
.dev = {
.platform_data = &usb_host_data,
.dma_mask = NULL,
.coherent_dma_mask = 0xffffffff,
},
.num_resources = ARRAY_SIZE(usb_resources),
.resource = usb_resources,
};
/* USB Func CN17 */
struct usbhs_private {
void __iomem *phy;
void __iomem *cr2;
struct renesas_usbhs_platform_info info;
};
#define IRQ15 intcs_evt2irq(0x03e0)
#define USB_PHY_MODE (1 << 4)
#define USB_PHY_INT_EN ((1 << 3) | (1 << 2))
#define USB_PHY_ON (1 << 1)
#define USB_PHY_OFF (1 << 0)
#define USB_PHY_INT_CLR (USB_PHY_ON | USB_PHY_OFF)
#define usbhs_get_priv(pdev) \
container_of(renesas_usbhs_get_info(pdev), struct usbhs_private, info)
static int usbhs_get_vbus(struct platform_device *pdev)
{
struct usbhs_private *priv = usbhs_get_priv(pdev);
return !((1 << 7) & __raw_readw(priv->cr2));
}
static void usbhs_phy_reset(struct platform_device *pdev)
{
struct usbhs_private *priv = usbhs_get_priv(pdev);
/* init phy */
__raw_writew(0x8a0a, priv->cr2);
}
static int usbhs_get_id(struct platform_device *pdev)
{
return USBHS_GADGET;
}
static irqreturn_t usbhs_interrupt(int irq, void *data)
{
struct platform_device *pdev = data;
struct usbhs_private *priv = usbhs_get_priv(pdev);
renesas_usbhs_call_notify_hotplug(pdev);
/* clear status */
__raw_writew(__raw_readw(priv->phy) | USB_PHY_INT_CLR, priv->phy);
return IRQ_HANDLED;
}
static int usbhs_hardware_init(struct platform_device *pdev)
{
struct usbhs_private *priv = usbhs_get_priv(pdev);
int ret;
/* clear interrupt status */
__raw_writew(USB_PHY_MODE | USB_PHY_INT_CLR, priv->phy);
ret = request_irq(IRQ15, usbhs_interrupt, IRQF_TRIGGER_HIGH,
dev_name(&pdev->dev), pdev);
if (ret) {
dev_err(&pdev->dev, "request_irq err\n");
return ret;
}
/* enable USB phy interrupt */
__raw_writew(USB_PHY_MODE | USB_PHY_INT_EN, priv->phy);
return 0;
}
static void usbhs_hardware_exit(struct platform_device *pdev)
{
struct usbhs_private *priv = usbhs_get_priv(pdev);
/* clear interrupt status */
__raw_writew(USB_PHY_MODE | USB_PHY_INT_CLR, priv->phy);
free_irq(IRQ15, pdev);
}
static u32 usbhs_pipe_cfg[] = {
USB_ENDPOINT_XFER_CONTROL,
USB_ENDPOINT_XFER_ISOC,
USB_ENDPOINT_XFER_ISOC,
USB_ENDPOINT_XFER_BULK,
USB_ENDPOINT_XFER_BULK,
USB_ENDPOINT_XFER_BULK,
USB_ENDPOINT_XFER_INT,
USB_ENDPOINT_XFER_INT,
USB_ENDPOINT_XFER_INT,
USB_ENDPOINT_XFER_BULK,
USB_ENDPOINT_XFER_BULK,
USB_ENDPOINT_XFER_BULK,
USB_ENDPOINT_XFER_BULK,
USB_ENDPOINT_XFER_BULK,
USB_ENDPOINT_XFER_BULK,
USB_ENDPOINT_XFER_BULK,
};
static struct usbhs_private usbhs_private = {
.phy = IOMEM(0xe60781e0), /* USBPHYINT */
.cr2 = IOMEM(0xe605810c), /* USBCR2 */
.info = {
.platform_callback = {
.hardware_init = usbhs_hardware_init,
.hardware_exit = usbhs_hardware_exit,
.get_id = usbhs_get_id,
.phy_reset = usbhs_phy_reset,
.get_vbus = usbhs_get_vbus,
},
.driver_param = {
.buswait_bwait = 4,
.has_otg = 1,
.pipe_type = usbhs_pipe_cfg,
.pipe_size = ARRAY_SIZE(usbhs_pipe_cfg),
},
},
};
static struct resource usbhs_resources[] = {
[0] = {
.start = 0xE6890000,
.end = 0xE68900e6 - 1,
.flags = IORESOURCE_MEM,
},
[1] = {
.start = gic_spi(62),
.end = gic_spi(62),
.flags = IORESOURCE_IRQ,
},
};
static struct platform_device usbhs_device = {
.name = "renesas_usbhs",
.id = -1,
.dev = {
.dma_mask = NULL,
.coherent_dma_mask = 0xffffffff,
.platform_data = &usbhs_private.info,
},
.num_resources = ARRAY_SIZE(usbhs_resources),
.resource = usbhs_resources,
};
/* LCDC */
static struct fb_videomode kzm_lcdc_mode = {
.name = "WVGA Panel",
.xres = 800,
.yres = 480,
.left_margin = 220,
.right_margin = 110,
.hsync_len = 70,
.upper_margin = 20,
.lower_margin = 5,
.vsync_len = 5,
.sync = 0,
};
static struct sh_mobile_lcdc_info lcdc_info = {
.clock_source = LCDC_CLK_BUS,
.ch[0] = {
.chan = LCDC_CHAN_MAINLCD,
.fourcc = V4L2_PIX_FMT_RGB565,
.interface_type = RGB24,
.lcd_modes = &kzm_lcdc_mode,
.num_modes = 1,
.clock_divider = 5,
.flags = 0,
.panel_cfg = {
.width = 152,
.height = 91,
},
}
};
static struct resource lcdc_resources[] = {
[0] = {
.name = "LCDC",
.start = 0xfe940000,
.end = 0xfe943fff,
.flags = IORESOURCE_MEM,
},
[1] = {
.start = intcs_evt2irq(0x580),
.flags = IORESOURCE_IRQ,
},
};
static struct platform_device lcdc_device = {
.name = "sh_mobile_lcdc_fb",
.num_resources = ARRAY_SIZE(lcdc_resources),
.resource = lcdc_resources,
.dev = {
.platform_data = &lcdc_info,
.coherent_dma_mask = ~0,
},
};
/* Fixed 1.8V regulator to be used by MMCIF */
static struct regulator_consumer_supply fixed1v8_power_consumers[] =
{
REGULATOR_SUPPLY("vmmc", "sh_mmcif.0"),
REGULATOR_SUPPLY("vqmmc", "sh_mmcif.0"),
};
/* MMCIF */
static struct resource sh_mmcif_resources[] = {
[0] = {
.name = "MMCIF",
.start = 0xe6bd0000,
.end = 0xe6bd00ff,
.flags = IORESOURCE_MEM,
},
[1] = {
.start = gic_spi(140),
.flags = IORESOURCE_IRQ,
},
[2] = {
.start = gic_spi(141),
.flags = IORESOURCE_IRQ,
},
};
static struct sh_mmcif_plat_data sh_mmcif_platdata = {
.ocr = MMC_VDD_165_195,
.caps = MMC_CAP_8_BIT_DATA | MMC_CAP_NONREMOVABLE,
.slave_id_tx = SHDMA_SLAVE_MMCIF_TX,
.slave_id_rx = SHDMA_SLAVE_MMCIF_RX,
};
static struct platform_device mmc_device = {
.name = "sh_mmcif",
.dev = {
.dma_mask = NULL,
.coherent_dma_mask = 0xffffffff,
.platform_data = &sh_mmcif_platdata,
},
.num_resources = ARRAY_SIZE(sh_mmcif_resources),
.resource = sh_mmcif_resources,
};
/* Fixed 2.8V regulators to be used by SDHI0 and SDHI2 */
static struct regulator_consumer_supply fixed2v8_power_consumers[] =
{
REGULATOR_SUPPLY("vmmc", "sh_mobile_sdhi.0"),
REGULATOR_SUPPLY("vqmmc", "sh_mobile_sdhi.0"),
REGULATOR_SUPPLY("vmmc", "sh_mobile_sdhi.2"),
REGULATOR_SUPPLY("vqmmc", "sh_mobile_sdhi.2"),
};
/* SDHI */
static struct sh_mobile_sdhi_info sdhi0_info = {
.tmio_flags = TMIO_MMC_HAS_IDLE_WAIT,
.tmio_caps = MMC_CAP_SD_HIGHSPEED,
.tmio_ocr_mask = MMC_VDD_27_28 | MMC_VDD_28_29,
};
static struct resource sdhi0_resources[] = {
[0] = {
.name = "SDHI0",
.start = 0xee100000,
.end = 0xee1000ff,
.flags = IORESOURCE_MEM,
},
[1] = {
.name = SH_MOBILE_SDHI_IRQ_CARD_DETECT,
.start = gic_spi(83),
.flags = IORESOURCE_IRQ,
},
[2] = {
.name = SH_MOBILE_SDHI_IRQ_SDCARD,
.start = gic_spi(84),
.flags = IORESOURCE_IRQ,
},
[3] = {
.name = SH_MOBILE_SDHI_IRQ_SDIO,
.start = gic_spi(85),
.flags = IORESOURCE_IRQ,
},
};
static struct platform_device sdhi0_device = {
.name = "sh_mobile_sdhi",
.num_resources = ARRAY_SIZE(sdhi0_resources),
.resource = sdhi0_resources,
.dev = {
.platform_data = &sdhi0_info,
},
};
/* Micro SD */
static struct sh_mobile_sdhi_info sdhi2_info = {
.tmio_flags = TMIO_MMC_HAS_IDLE_WAIT |
TMIO_MMC_USE_GPIO_CD |
TMIO_MMC_WRPROTECT_DISABLE,
.tmio_caps = MMC_CAP_SD_HIGHSPEED,
.tmio_ocr_mask = MMC_VDD_27_28 | MMC_VDD_28_29,
.cd_gpio = GPIO_PORT13,
};
static struct resource sdhi2_resources[] = {
[0] = {
.name = "SDHI2",
.start = 0xee140000,
.end = 0xee1400ff,
.flags = IORESOURCE_MEM,
},
[1] = {
.name = SH_MOBILE_SDHI_IRQ_CARD_DETECT,
.start = gic_spi(103),
.flags = IORESOURCE_IRQ,
},
[2] = {
.name = SH_MOBILE_SDHI_IRQ_SDCARD,
.start = gic_spi(104),
.flags = IORESOURCE_IRQ,
},
[3] = {
.name = SH_MOBILE_SDHI_IRQ_SDIO,
.start = gic_spi(105),
.flags = IORESOURCE_IRQ,
},
};
static struct platform_device sdhi2_device = {
.name = "sh_mobile_sdhi",
.id = 2,
.num_resources = ARRAY_SIZE(sdhi2_resources),
.resource = sdhi2_resources,
.dev = {
.platform_data = &sdhi2_info,
},
};
/* KEY */
#define GPIO_KEY(c, g, d) { .code = c, .gpio = g, .desc = d, .active_low = 1 }
static struct gpio_keys_button gpio_buttons[] = {
GPIO_KEY(KEY_BACK, GPIO_PCF8575_PORT10, "SW3"),
GPIO_KEY(KEY_RIGHT, GPIO_PCF8575_PORT11, "SW2-R"),
GPIO_KEY(KEY_LEFT, GPIO_PCF8575_PORT12, "SW2-L"),
GPIO_KEY(KEY_ENTER, GPIO_PCF8575_PORT13, "SW2-P"),
GPIO_KEY(KEY_UP, GPIO_PCF8575_PORT14, "SW2-U"),
GPIO_KEY(KEY_DOWN, GPIO_PCF8575_PORT15, "SW2-D"),
GPIO_KEY(KEY_HOME, GPIO_PCF8575_PORT16, "SW1"),
};
static struct gpio_keys_platform_data gpio_key_info = {
.buttons = gpio_buttons,
.nbuttons = ARRAY_SIZE(gpio_buttons),
.poll_interval = 250, /* poling at this point */
};
static struct platform_device gpio_keys_device = {
/* gpio-pcf857x.c driver doesn't support gpio_to_irq() */
.name = "gpio-keys-polled",
.dev = {
.platform_data = &gpio_key_info,
},
};
/* FSI-AK4648 */
static struct sh_fsi_platform_info fsi_info = {
.port_a = {
.tx_id = SHDMA_SLAVE_FSI2A_TX,
},
};
static struct resource fsi_resources[] = {
[0] = {
.name = "FSI",
.start = 0xEC230000,
.end = 0xEC230400 - 1,
.flags = IORESOURCE_MEM,
},
[1] = {
.start = gic_spi(146),
.flags = IORESOURCE_IRQ,
},
};
static struct platform_device fsi_device = {
.name = "sh_fsi2",
.id = -1,
.num_resources = ARRAY_SIZE(fsi_resources),
.resource = fsi_resources,
.dev = {
.platform_data = &fsi_info,
},
};
static struct asoc_simple_dai_init_info fsi2_ak4648_init_info = {
.fmt = SND_SOC_DAIFMT_LEFT_J,
.codec_daifmt = SND_SOC_DAIFMT_CBM_CFM,
.cpu_daifmt = SND_SOC_DAIFMT_CBS_CFS,
.sysclk = 11289600,
};
static struct asoc_simple_card_info fsi2_ak4648_info = {
.name = "AK4648",
.card = "FSI2A-AK4648",
.cpu_dai = "fsia-dai",
.codec = "ak4642-codec.0-0012",
.platform = "sh_fsi2",
.codec_dai = "ak4642-hifi",
.init = &fsi2_ak4648_init_info,
};
static struct platform_device fsi_ak4648_device = {
.name = "asoc-simple-card",
.dev = {
.platform_data = &fsi2_ak4648_info,
},
};
/* I2C */
static struct pcf857x_platform_data pcf8575_pdata = {
.gpio_base = GPIO_PCF8575_BASE,
};
static struct i2c_board_info i2c0_devices[] = {
{
I2C_BOARD_INFO("ak4648", 0x12),
},
{
I2C_BOARD_INFO("r2025sd", 0x32),
}
};
static struct i2c_board_info i2c1_devices[] = {
{
I2C_BOARD_INFO("st1232-ts", 0x55),
.irq = intcs_evt2irq(0x300), /* IRQ8 */
},
};
static struct i2c_board_info i2c3_devices[] = {
{
I2C_BOARD_INFO("pcf8575", 0x20),
.platform_data = &pcf8575_pdata,
},
};
static struct platform_device *kzm_devices[] __initdata = {
&smsc_device,
&usb_host_device,
&usbhs_device,
&lcdc_device,
&mmc_device,
&sdhi0_device,
&sdhi2_device,
&gpio_keys_device,
&fsi_device,
&fsi_ak4648_device,
};
/*
* FIXME
*
* This is quick hack for enabling LCDC backlight
*/
static int __init as3711_enable_lcdc_backlight(void)
{
struct i2c_adapter *a = i2c_get_adapter(0);
struct i2c_msg msg;
int i, ret;
__u8 magic[] = {
0x40, 0x2a,
0x43, 0x3c,
0x44, 0x3c,
0x45, 0x3c,
0x54, 0x03,
0x51, 0x00,
0x51, 0x01,
0xff, 0x00, /* wait */
0x43, 0xf0,
0x44, 0xf0,
0x45, 0xf0,
};
if (!machine_is_kzm9g())
return 0;
if (!a)
return 0;
msg.addr = 0x40;
msg.len = 2;
msg.flags = 0;
for (i = 0; i < ARRAY_SIZE(magic); i += 2) {
msg.buf = magic + i;
if (0xff == msg.buf[0]) {
udelay(500);
continue;
}
ret = i2c_transfer(a, &msg, 1);
if (ret < 0) {
pr_err("i2c transfer fail\n");
break;
}
}
return 0;
}
device_initcall(as3711_enable_lcdc_backlight);
static void __init kzm_init(void)
{
regulator_register_always_on(0, "fixed-1.8V", fixed1v8_power_consumers,
ARRAY_SIZE(fixed1v8_power_consumers), 1800000);
regulator_register_always_on(1, "fixed-2.8V", fixed2v8_power_consumers,
ARRAY_SIZE(fixed2v8_power_consumers), 2800000);
regulator_register_fixed(2, dummy_supplies, ARRAY_SIZE(dummy_supplies));
sh73a0_pinmux_init();
/* enable SCIFA4 */
gpio_request(GPIO_FN_SCIFA4_TXD, NULL);
gpio_request(GPIO_FN_SCIFA4_RXD, NULL);
gpio_request(GPIO_FN_SCIFA4_RTS_, NULL);
gpio_request(GPIO_FN_SCIFA4_CTS_, NULL);
/* CS4 for SMSC/USB */
gpio_request(GPIO_FN_CS4_, NULL); /* CS4 */
/* SMSC */
gpio_request(GPIO_PORT224, NULL); /* IRQ3 */
gpio_direction_input(GPIO_PORT224);
/* LCDC */
gpio_request(GPIO_FN_LCDD23, NULL);
gpio_request(GPIO_FN_LCDD22, NULL);
gpio_request(GPIO_FN_LCDD21, NULL);
gpio_request(GPIO_FN_LCDD20, NULL);
gpio_request(GPIO_FN_LCDD19, NULL);
gpio_request(GPIO_FN_LCDD18, NULL);
gpio_request(GPIO_FN_LCDD17, NULL);
gpio_request(GPIO_FN_LCDD16, NULL);
gpio_request(GPIO_FN_LCDD15, NULL);
gpio_request(GPIO_FN_LCDD14, NULL);
gpio_request(GPIO_FN_LCDD13, NULL);
gpio_request(GPIO_FN_LCDD12, NULL);
gpio_request(GPIO_FN_LCDD11, NULL);
gpio_request(GPIO_FN_LCDD10, NULL);
gpio_request(GPIO_FN_LCDD9, NULL);
gpio_request(GPIO_FN_LCDD8, NULL);
gpio_request(GPIO_FN_LCDD7, NULL);
gpio_request(GPIO_FN_LCDD6, NULL);
gpio_request(GPIO_FN_LCDD5, NULL);
gpio_request(GPIO_FN_LCDD4, NULL);
gpio_request(GPIO_FN_LCDD3, NULL);
gpio_request(GPIO_FN_LCDD2, NULL);
gpio_request(GPIO_FN_LCDD1, NULL);
gpio_request(GPIO_FN_LCDD0, NULL);
gpio_request(GPIO_FN_LCDDISP, NULL);
gpio_request(GPIO_FN_LCDDCK, NULL);
gpio_request(GPIO_PORT222, NULL); /* LCDCDON */
gpio_request(GPIO_PORT226, NULL); /* SC */
gpio_direction_output(GPIO_PORT222, 1);
gpio_direction_output(GPIO_PORT226, 1);
/* Touchscreen */
gpio_request(GPIO_PORT223, NULL); /* IRQ8 */
gpio_direction_input(GPIO_PORT223);
/* enable MMCIF */
gpio_request(GPIO_FN_MMCCLK0, NULL);
gpio_request(GPIO_FN_MMCCMD0_PU, NULL);
gpio_request(GPIO_FN_MMCD0_0_PU, NULL);
gpio_request(GPIO_FN_MMCD0_1_PU, NULL);
gpio_request(GPIO_FN_MMCD0_2_PU, NULL);
gpio_request(GPIO_FN_MMCD0_3_PU, NULL);
gpio_request(GPIO_FN_MMCD0_4_PU, NULL);
gpio_request(GPIO_FN_MMCD0_5_PU, NULL);
gpio_request(GPIO_FN_MMCD0_6_PU, NULL);
gpio_request(GPIO_FN_MMCD0_7_PU, NULL);
/* enable SD */
gpio_request(GPIO_FN_SDHIWP0, NULL);
gpio_request(GPIO_FN_SDHICD0, NULL);
gpio_request(GPIO_FN_SDHICMD0, NULL);
gpio_request(GPIO_FN_SDHICLK0, NULL);
gpio_request(GPIO_FN_SDHID0_3, NULL);
gpio_request(GPIO_FN_SDHID0_2, NULL);
gpio_request(GPIO_FN_SDHID0_1, NULL);
gpio_request(GPIO_FN_SDHID0_0, NULL);
gpio_request(GPIO_FN_SDHI0_VCCQ_MC0_ON, NULL);
gpio_request(GPIO_PORT15, NULL);
gpio_direction_output(GPIO_PORT15, 1); /* power */
/* enable Micro SD */
gpio_request(GPIO_FN_SDHID2_0, NULL);
gpio_request(GPIO_FN_SDHID2_1, NULL);
gpio_request(GPIO_FN_SDHID2_2, NULL);
gpio_request(GPIO_FN_SDHID2_3, NULL);
gpio_request(GPIO_FN_SDHICMD2, NULL);
gpio_request(GPIO_FN_SDHICLK2, NULL);
gpio_request(GPIO_PORT14, NULL);
gpio_direction_output(GPIO_PORT14, 1); /* power */
/* I2C 3 */
gpio_request(GPIO_FN_PORT27_I2C_SCL3, NULL);
gpio_request(GPIO_FN_PORT28_I2C_SDA3, NULL);
/* enable FSI2 port A (ak4648) */
gpio_request(GPIO_FN_FSIACK, NULL);
gpio_request(GPIO_FN_FSIAILR, NULL);
gpio_request(GPIO_FN_FSIAIBT, NULL);
gpio_request(GPIO_FN_FSIAISLD, NULL);
gpio_request(GPIO_FN_FSIAOSLD, NULL);
/* enable USB */
gpio_request(GPIO_FN_VBUS_0, NULL);
#ifdef CONFIG_CACHE_L2X0
/* Early BRESP enable, Shared attribute override enable, 64K*8way */
l2x0_init(IOMEM(0xf0100000), 0x40460000, 0x82000fff);
#endif
i2c_register_board_info(0, i2c0_devices, ARRAY_SIZE(i2c0_devices));
i2c_register_board_info(1, i2c1_devices, ARRAY_SIZE(i2c1_devices));
i2c_register_board_info(3, i2c3_devices, ARRAY_SIZE(i2c3_devices));
sh73a0_add_standard_devices();
platform_add_devices(kzm_devices, ARRAY_SIZE(kzm_devices));
}
static void kzm9g_restart(char mode, const char *cmd)
{
#define RESCNT2 IOMEM(0xe6188020)
/* Do soft power on reset */
writel((1 << 31), RESCNT2);
}
static const char *kzm9g_boards_compat_dt[] __initdata = {
"renesas,kzm9g",
NULL,
};
DT_MACHINE_START(KZM9G_DT, "kzm9g")
.map_io = sh73a0_map_io,
.init_early = sh73a0_add_early_devices,
.nr_irqs = NR_IRQS_LEGACY,
.init_irq = sh73a0_init_irq,
.handle_irq = gic_handle_irq,
.init_machine = kzm_init,
.init_late = shmobile_init_late,
.timer = &shmobile_timer,
.restart = kzm9g_restart,
.dt_compat = kzm9g_boards_compat_dt,
MACHINE_END
View Git Blame Copy Permalink