2
0
mirror of https://github.com/edk2-porting/linux-next.git synced 2024-12-25 05:34:00 +08:00
linux-next/Documentation/PCI/endpoint/pci-test-howto.rst
Changbin Du 9595aee2a3 Documentation: PCI: convert endpoint/pci-test-howto.txt to reST
Convert plain text documentation to reStructuredText format and add it to
Sphinx TOC tree.  No essential content change.

Signed-off-by: Changbin Du <changbin.du@gmail.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-05-30 17:54:34 -05:00

236 lines
5.9 KiB
ReStructuredText

.. SPDX-License-Identifier: GPL-2.0
===================
PCI Test User Guide
===================
:Author: Kishon Vijay Abraham I <kishon@ti.com>
This document is a guide to help users use pci-epf-test function driver
and pci_endpoint_test host driver for testing PCI. The list of steps to
be followed in the host side and EP side is given below.
Endpoint Device
===============
Endpoint Controller Devices
---------------------------
To find the list of endpoint controller devices in the system::
# ls /sys/class/pci_epc/
51000000.pcie_ep
If PCI_ENDPOINT_CONFIGFS is enabled::
# ls /sys/kernel/config/pci_ep/controllers
51000000.pcie_ep
Endpoint Function Drivers
-------------------------
To find the list of endpoint function drivers in the system::
# ls /sys/bus/pci-epf/drivers
pci_epf_test
If PCI_ENDPOINT_CONFIGFS is enabled::
# ls /sys/kernel/config/pci_ep/functions
pci_epf_test
Creating pci-epf-test Device
----------------------------
PCI endpoint function device can be created using the configfs. To create
pci-epf-test device, the following commands can be used::
# mount -t configfs none /sys/kernel/config
# cd /sys/kernel/config/pci_ep/
# mkdir functions/pci_epf_test/func1
The "mkdir func1" above creates the pci-epf-test function device that will
be probed by pci_epf_test driver.
The PCI endpoint framework populates the directory with the following
configurable fields::
# ls functions/pci_epf_test/func1
baseclass_code interrupt_pin progif_code subsys_id
cache_line_size msi_interrupts revid subsys_vendorid
deviceid msix_interrupts subclass_code vendorid
The PCI endpoint function driver populates these entries with default values
when the device is bound to the driver. The pci-epf-test driver populates
vendorid with 0xffff and interrupt_pin with 0x0001::
# cat functions/pci_epf_test/func1/vendorid
0xffff
# cat functions/pci_epf_test/func1/interrupt_pin
0x0001
Configuring pci-epf-test Device
-------------------------------
The user can configure the pci-epf-test device using configfs entry. In order
to change the vendorid and the number of MSI interrupts used by the function
device, the following commands can be used::
# echo 0x104c > functions/pci_epf_test/func1/vendorid
# echo 0xb500 > functions/pci_epf_test/func1/deviceid
# echo 16 > functions/pci_epf_test/func1/msi_interrupts
# echo 8 > functions/pci_epf_test/func1/msix_interrupts
Binding pci-epf-test Device to EP Controller
--------------------------------------------
In order for the endpoint function device to be useful, it has to be bound to
a PCI endpoint controller driver. Use the configfs to bind the function
device to one of the controller driver present in the system::
# ln -s functions/pci_epf_test/func1 controllers/51000000.pcie_ep/
Once the above step is completed, the PCI endpoint is ready to establish a link
with the host.
Start the Link
--------------
In order for the endpoint device to establish a link with the host, the _start_
field should be populated with '1'::
# echo 1 > controllers/51000000.pcie_ep/start
RootComplex Device
==================
lspci Output
------------
Note that the devices listed here correspond to the value populated in 1.4
above::
00:00.0 PCI bridge: Texas Instruments Device 8888 (rev 01)
01:00.0 Unassigned class [ff00]: Texas Instruments Device b500
Using Endpoint Test function Device
-----------------------------------
pcitest.sh added in tools/pci/ can be used to run all the default PCI endpoint
tests. To compile this tool the following commands should be used::
# cd <kernel-dir>
# make -C tools/pci
or if you desire to compile and install in your system::
# cd <kernel-dir>
# make -C tools/pci install
The tool and script will be located in <rootfs>/usr/bin/
pcitest.sh Output
~~~~~~~~~~~~~~~~~
::
# pcitest.sh
BAR tests
BAR0: OKAY
BAR1: OKAY
BAR2: OKAY
BAR3: OKAY
BAR4: NOT OKAY
BAR5: NOT OKAY
Interrupt tests
SET IRQ TYPE TO LEGACY: OKAY
LEGACY IRQ: NOT OKAY
SET IRQ TYPE TO MSI: OKAY
MSI1: OKAY
MSI2: OKAY
MSI3: OKAY
MSI4: OKAY
MSI5: OKAY
MSI6: OKAY
MSI7: OKAY
MSI8: OKAY
MSI9: OKAY
MSI10: OKAY
MSI11: OKAY
MSI12: OKAY
MSI13: OKAY
MSI14: OKAY
MSI15: OKAY
MSI16: OKAY
MSI17: NOT OKAY
MSI18: NOT OKAY
MSI19: NOT OKAY
MSI20: NOT OKAY
MSI21: NOT OKAY
MSI22: NOT OKAY
MSI23: NOT OKAY
MSI24: NOT OKAY
MSI25: NOT OKAY
MSI26: NOT OKAY
MSI27: NOT OKAY
MSI28: NOT OKAY
MSI29: NOT OKAY
MSI30: NOT OKAY
MSI31: NOT OKAY
MSI32: NOT OKAY
SET IRQ TYPE TO MSI-X: OKAY
MSI-X1: OKAY
MSI-X2: OKAY
MSI-X3: OKAY
MSI-X4: OKAY
MSI-X5: OKAY
MSI-X6: OKAY
MSI-X7: OKAY
MSI-X8: OKAY
MSI-X9: NOT OKAY
MSI-X10: NOT OKAY
MSI-X11: NOT OKAY
MSI-X12: NOT OKAY
MSI-X13: NOT OKAY
MSI-X14: NOT OKAY
MSI-X15: NOT OKAY
MSI-X16: NOT OKAY
[...]
MSI-X2047: NOT OKAY
MSI-X2048: NOT OKAY
Read Tests
SET IRQ TYPE TO MSI: OKAY
READ ( 1 bytes): OKAY
READ ( 1024 bytes): OKAY
READ ( 1025 bytes): OKAY
READ (1024000 bytes): OKAY
READ (1024001 bytes): OKAY
Write Tests
WRITE ( 1 bytes): OKAY
WRITE ( 1024 bytes): OKAY
WRITE ( 1025 bytes): OKAY
WRITE (1024000 bytes): OKAY
WRITE (1024001 bytes): OKAY
Copy Tests
COPY ( 1 bytes): OKAY
COPY ( 1024 bytes): OKAY
COPY ( 1025 bytes): OKAY
COPY (1024000 bytes): OKAY
COPY (1024001 bytes): OKAY