2
0
mirror of https://github.com/edk2-porting/linux-next.git synced 2024-12-29 15:43:59 +08:00
linux-next/drivers/net/irda/smsc-ircc2.h
Jeff Kirsher e8478de32e irda: Fix FSF address in file headers
Several files refer to an old address for the Free Software Foundation
in the file header comment.  Resolve by replacing the address with
the URL <http://www.gnu.org/licenses/> so that we do not have to keep
updating the header comments anytime the address changes.

CC: Samuel Ortiz <samuel@sortiz.org>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-12-06 12:37:55 -05:00

192 lines
6.4 KiB
C

/*********************************************************************
*
* Description: Definitions for the SMC IrCC chipset
* Status: Experimental.
* Author: Daniele Peri (peri@csai.unipa.it)
*
* Copyright (c) 2002 Daniele Peri
* All Rights Reserved.
*
* Based on smc-ircc.h:
*
* Copyright (c) 1999-2000, Dag Brattli <dagb@cs.uit.no>
* Copyright (c) 1998-1999, Thomas Davis (tadavis@jps.net>
* All Rights Reserved
*
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, see <http://www.gnu.org/licenses/>.
*
********************************************************************/
#ifndef SMSC_IRCC2_H
#define SMSC_IRCC2_H
/* DMA modes needed */
#define DMA_TX_MODE 0x08 /* Mem to I/O, ++, demand. */
#define DMA_RX_MODE 0x04 /* I/O to mem, ++, demand. */
/* Master Control Register */
#define IRCC_MASTER 0x07
#define IRCC_MASTER_POWERDOWN 0x80
#define IRCC_MASTER_RESET 0x40
#define IRCC_MASTER_INT_EN 0x20
#define IRCC_MASTER_ERROR_RESET 0x10
/* Register block 0 */
/* Interrupt Identification */
#define IRCC_IIR 0x01
#define IRCC_IIR_ACTIVE_FRAME 0x80
#define IRCC_IIR_EOM 0x40
#define IRCC_IIR_RAW_MODE 0x20
#define IRCC_IIR_FIFO 0x10
/* Interrupt Enable */
#define IRCC_IER 0x02
#define IRCC_IER_ACTIVE_FRAME 0x80
#define IRCC_IER_EOM 0x40
#define IRCC_IER_RAW_MODE 0x20
#define IRCC_IER_FIFO 0x10
/* Line Status Register */
#define IRCC_LSR 0x03
#define IRCC_LSR_UNDERRUN 0x80
#define IRCC_LSR_OVERRUN 0x40
#define IRCC_LSR_FRAME_ERROR 0x20
#define IRCC_LSR_SIZE_ERROR 0x10
#define IRCC_LSR_CRC_ERROR 0x80
#define IRCC_LSR_FRAME_ABORT 0x40
/* Line Status Address Register */
#define IRCC_LSAR 0x03
#define IRCC_LSAR_ADDRESS_MASK 0x07
/* Line Control Register A */
#define IRCC_LCR_A 0x04
#define IRCC_LCR_A_FIFO_RESET 0x80
#define IRCC_LCR_A_FAST 0x40
#define IRCC_LCR_A_GP_DATA 0x20
#define IRCC_LCR_A_RAW_TX 0x10
#define IRCC_LCR_A_RAW_RX 0x08
#define IRCC_LCR_A_ABORT 0x04
#define IRCC_LCR_A_DATA_DONE 0x02
/* Line Control Register B */
#define IRCC_LCR_B 0x05
#define IRCC_LCR_B_SCE_DISABLED 0x00
#define IRCC_LCR_B_SCE_TRANSMIT 0x40
#define IRCC_LCR_B_SCE_RECEIVE 0x80
#define IRCC_LCR_B_SCE_UNDEFINED 0xc0
#define IRCC_LCR_B_SIP_ENABLE 0x20
#define IRCC_LCR_B_BRICK_WALL 0x10
/* Bus Status Register */
#define IRCC_BSR 0x06
#define IRCC_BSR_NOT_EMPTY 0x80
#define IRCC_BSR_FIFO_FULL 0x40
#define IRCC_BSR_TIMEOUT 0x20
/* Register block 1 */
#define IRCC_FIFO_THRESHOLD 0x02
#define IRCC_SCE_CFGA 0x00
#define IRCC_CFGA_AUX_IR 0x80
#define IRCC_CFGA_HALF_DUPLEX 0x04
#define IRCC_CFGA_TX_POLARITY 0x02
#define IRCC_CFGA_RX_POLARITY 0x01
#define IRCC_CFGA_COM 0x00
#define IRCC_SCE_CFGA_BLOCK_CTRL_BITS_MASK 0x87
#define IRCC_CFGA_IRDA_SIR_A 0x08
#define IRCC_CFGA_ASK_SIR 0x10
#define IRCC_CFGA_IRDA_SIR_B 0x18
#define IRCC_CFGA_IRDA_HDLC 0x20
#define IRCC_CFGA_IRDA_4PPM 0x28
#define IRCC_CFGA_CONSUMER 0x30
#define IRCC_CFGA_RAW_IR 0x38
#define IRCC_CFGA_OTHER 0x40
#define IRCC_IR_HDLC 0x04
#define IRCC_IR_4PPM 0x01
#define IRCC_IR_CONSUMER 0x02
#define IRCC_SCE_CFGB 0x01
#define IRCC_CFGB_LOOPBACK 0x20
#define IRCC_CFGB_LPBCK_TX_CRC 0x10
#define IRCC_CFGB_NOWAIT 0x08
#define IRCC_CFGB_STRING_MOVE 0x04
#define IRCC_CFGB_DMA_BURST 0x02
#define IRCC_CFGB_DMA_ENABLE 0x01
#define IRCC_CFGB_MUX_COM 0x00
#define IRCC_CFGB_MUX_IR 0x40
#define IRCC_CFGB_MUX_AUX 0x80
#define IRCC_CFGB_MUX_INACTIVE 0xc0
/* Register block 3 - Identification Registers! */
#define IRCC_ID_HIGH 0x00 /* 0x10 */
#define IRCC_ID_LOW 0x01 /* 0xB8 */
#define IRCC_CHIP_ID 0x02 /* 0xF1 */
#define IRCC_VERSION 0x03 /* 0x01 */
#define IRCC_INTERFACE 0x04 /* low 4 = DMA, high 4 = IRQ */
#define IRCC_INTERFACE_DMA_MASK 0x0F /* low 4 = DMA, high 4 = IRQ */
#define IRCC_INTERFACE_IRQ_MASK 0xF0 /* low 4 = DMA, high 4 = IRQ */
/* Register block 4 - IrDA */
#define IRCC_CONTROL 0x00
#define IRCC_BOF_COUNT_LO 0x01 /* Low byte */
#define IRCC_BOF_COUNT_HI 0x00 /* High nibble (bit 0-3) */
#define IRCC_BRICKWALL_CNT_LO 0x02 /* Low byte */
#define IRCC_BRICKWALL_CNT_HI 0x03 /* High nibble (bit 4-7) */
#define IRCC_TX_SIZE_LO 0x04 /* Low byte */
#define IRCC_TX_SIZE_HI 0x03 /* High nibble (bit 0-3) */
#define IRCC_RX_SIZE_HI 0x05 /* High nibble (bit 0-3) */
#define IRCC_RX_SIZE_LO 0x06 /* Low byte */
#define IRCC_1152 0x80
#define IRCC_CRC 0x40
/* Register block 5 - IrDA */
#define IRCC_ATC 0x00
#define IRCC_ATC_nPROGREADY 0x80
#define IRCC_ATC_SPEED 0x40
#define IRCC_ATC_ENABLE 0x20
#define IRCC_ATC_MASK 0xE0
#define IRCC_IRHALFDUPLEX_TIMEOUT 0x01
#define IRCC_SCE_TX_DELAY_TIMER 0x02
/*
* Other definitions
*/
#define SMSC_IRCC2_MAX_SIR_SPEED 115200
#define SMSC_IRCC2_FIR_CHIP_IO_EXTENT 8
#define SMSC_IRCC2_SIR_CHIP_IO_EXTENT 8
#define SMSC_IRCC2_FIFO_SIZE 16
#define SMSC_IRCC2_FIFO_THRESHOLD 64
/* Max DMA buffer size needed = (data_size + 6) * (window_size) + 6; */
#define SMSC_IRCC2_RX_BUFF_TRUESIZE 14384
#define SMSC_IRCC2_TX_BUFF_TRUESIZE 14384
#define SMSC_IRCC2_MIN_TURN_TIME 0x07
#define SMSC_IRCC2_WINDOW_SIZE 0x07
/* Maximum wait for hw transmitter to finish */
#define SMSC_IRCC2_HW_TRANSMITTER_TIMEOUT_US 1000 /* 1 ms */
/* Maximum wait for ATC transceiver programming to finish */
#define SMSC_IRCC2_ATC_PROGRAMMING_TIMEOUT_JIFFIES 1
#endif /* SMSC_IRCC2_H */