mirror of
https://github.com/edk2-porting/linux-next.git
synced 2024-12-22 04:03:58 +08:00
0d19eac120
Pull #2 ARM updates from Russell King: "Further ARM AMBA primecell updates which aren't included directly in the previous commit. I wanted to keep these separate as they're touching stuff outside arch/arm/." * 'amba' of git://git.linaro.org/people/rmk/linux-arm: ARM: 7362/1: AMBA: Add module_amba_driver() helper macro for amba_driver ARM: 7335/1: mach-u300: do away with MMC config files ARM: 7280/1: mmc: mmci: Cache MMCICLOCK and MMCIPOWER register ARM: 7309/1: realview: fix unconnected interrupts on EB11MP ARM: 7230/1: mmc: mmci: Fix PIO read for small SDIO packets ARM: 7227/1: mmc: mmci: Prepare for SDIO before setting up DMA job ARM: 7223/1: mmc: mmci: Fixup use of runtime PM and use autosuspend ARM: 7221/1: mmc: mmci: Change from using legacy suspend ARM: 7219/1: mmc: mmci: Change vdd_handler to a generic ios_handler ARM: 7218/1: mmc: mmci: Provide option to configure bus signal direction ARM: 7217/1: mmc: mmci: Put power register deviations in variant data ARM: 7216/1: mmc: mmci: Do not release spinlock in request_end ARM: 7215/1: mmc: mmci: Increase max_segs from 16 to 128
285 lines
7.5 KiB
C
285 lines
7.5 KiB
C
/*
|
|
* Copyright (C) ST-Ericsson SA 2010
|
|
*
|
|
* Author: Hanumath Prasad <hanumath.prasad@stericsson.com>
|
|
* License terms: GNU General Public License (GPL) version 2
|
|
*/
|
|
|
|
#include <linux/kernel.h>
|
|
#include <linux/gpio.h>
|
|
#include <linux/amba/bus.h>
|
|
#include <linux/amba/mmci.h>
|
|
#include <linux/mmc/host.h>
|
|
#include <linux/platform_device.h>
|
|
|
|
#include <asm/mach-types.h>
|
|
#include <plat/ste_dma40.h>
|
|
#include <mach/devices.h>
|
|
#include <mach/hardware.h>
|
|
|
|
#include "devices-db8500.h"
|
|
#include "board-mop500.h"
|
|
#include "ste-dma40-db8500.h"
|
|
|
|
/*
|
|
* v2 has a new version of this block that need to be forced, the number found
|
|
* in hardware is incorrect
|
|
*/
|
|
#define U8500_SDI_V2_PERIPHID 0x10480180
|
|
|
|
/*
|
|
* SDI 0 (MicroSD slot)
|
|
*/
|
|
|
|
/* GPIO pins used by the sdi0 level shifter */
|
|
static int sdi0_en = -1;
|
|
static int sdi0_vsel = -1;
|
|
|
|
static int mop500_sdi0_ios_handler(struct device *dev, struct mmc_ios *ios)
|
|
{
|
|
switch (ios->power_mode) {
|
|
case MMC_POWER_UP:
|
|
case MMC_POWER_ON:
|
|
/*
|
|
* Level shifter voltage should depend on vdd to when deciding
|
|
* on either 1.8V or 2.9V. Once the decision has been made the
|
|
* level shifter must be disabled and re-enabled with a changed
|
|
* select signal in order to switch the voltage. Since there is
|
|
* no framework support yet for indicating 1.8V in vdd, use the
|
|
* default 2.9V.
|
|
*/
|
|
gpio_direction_output(sdi0_vsel, 0);
|
|
gpio_direction_output(sdi0_en, 1);
|
|
break;
|
|
case MMC_POWER_OFF:
|
|
gpio_direction_output(sdi0_vsel, 0);
|
|
gpio_direction_output(sdi0_en, 0);
|
|
break;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
#ifdef CONFIG_STE_DMA40
|
|
struct stedma40_chan_cfg mop500_sdi0_dma_cfg_rx = {
|
|
.mode = STEDMA40_MODE_LOGICAL,
|
|
.dir = STEDMA40_PERIPH_TO_MEM,
|
|
.src_dev_type = DB8500_DMA_DEV29_SD_MM0_RX,
|
|
.dst_dev_type = STEDMA40_DEV_DST_MEMORY,
|
|
.src_info.data_width = STEDMA40_WORD_WIDTH,
|
|
.dst_info.data_width = STEDMA40_WORD_WIDTH,
|
|
};
|
|
|
|
static struct stedma40_chan_cfg mop500_sdi0_dma_cfg_tx = {
|
|
.mode = STEDMA40_MODE_LOGICAL,
|
|
.dir = STEDMA40_MEM_TO_PERIPH,
|
|
.src_dev_type = STEDMA40_DEV_SRC_MEMORY,
|
|
.dst_dev_type = DB8500_DMA_DEV29_SD_MM0_TX,
|
|
.src_info.data_width = STEDMA40_WORD_WIDTH,
|
|
.dst_info.data_width = STEDMA40_WORD_WIDTH,
|
|
};
|
|
#endif
|
|
|
|
static struct mmci_platform_data mop500_sdi0_data = {
|
|
.ios_handler = mop500_sdi0_ios_handler,
|
|
.ocr_mask = MMC_VDD_29_30,
|
|
.f_max = 50000000,
|
|
.capabilities = MMC_CAP_4_BIT_DATA |
|
|
MMC_CAP_SD_HIGHSPEED |
|
|
MMC_CAP_MMC_HIGHSPEED,
|
|
.gpio_wp = -1,
|
|
.sigdir = MCI_ST_FBCLKEN |
|
|
MCI_ST_CMDDIREN |
|
|
MCI_ST_DATA0DIREN |
|
|
MCI_ST_DATA2DIREN,
|
|
#ifdef CONFIG_STE_DMA40
|
|
.dma_filter = stedma40_filter,
|
|
.dma_rx_param = &mop500_sdi0_dma_cfg_rx,
|
|
.dma_tx_param = &mop500_sdi0_dma_cfg_tx,
|
|
#endif
|
|
};
|
|
|
|
static void sdi0_configure(void)
|
|
{
|
|
int ret;
|
|
|
|
ret = gpio_request(sdi0_en, "level shifter enable");
|
|
if (!ret)
|
|
ret = gpio_request(sdi0_vsel,
|
|
"level shifter 1v8-3v select");
|
|
|
|
if (ret) {
|
|
pr_warning("unable to config sdi0 gpios for level shifter.\n");
|
|
return;
|
|
}
|
|
|
|
/* Select the default 2.9V and enable level shifter */
|
|
gpio_direction_output(sdi0_vsel, 0);
|
|
gpio_direction_output(sdi0_en, 1);
|
|
|
|
/* Add the device, force v2 to subrevision 1 */
|
|
db8500_add_sdi0(&mop500_sdi0_data, U8500_SDI_V2_PERIPHID);
|
|
}
|
|
|
|
void mop500_sdi_tc35892_init(void)
|
|
{
|
|
mop500_sdi0_data.gpio_cd = GPIO_SDMMC_CD;
|
|
sdi0_en = GPIO_SDMMC_EN;
|
|
sdi0_vsel = GPIO_SDMMC_1V8_3V_SEL;
|
|
sdi0_configure();
|
|
}
|
|
|
|
/*
|
|
* SDI1 (SDIO WLAN)
|
|
*/
|
|
#ifdef CONFIG_STE_DMA40
|
|
static struct stedma40_chan_cfg sdi1_dma_cfg_rx = {
|
|
.mode = STEDMA40_MODE_LOGICAL,
|
|
.dir = STEDMA40_PERIPH_TO_MEM,
|
|
.src_dev_type = DB8500_DMA_DEV32_SD_MM1_RX,
|
|
.dst_dev_type = STEDMA40_DEV_DST_MEMORY,
|
|
.src_info.data_width = STEDMA40_WORD_WIDTH,
|
|
.dst_info.data_width = STEDMA40_WORD_WIDTH,
|
|
};
|
|
|
|
static struct stedma40_chan_cfg sdi1_dma_cfg_tx = {
|
|
.mode = STEDMA40_MODE_LOGICAL,
|
|
.dir = STEDMA40_MEM_TO_PERIPH,
|
|
.src_dev_type = STEDMA40_DEV_SRC_MEMORY,
|
|
.dst_dev_type = DB8500_DMA_DEV32_SD_MM1_TX,
|
|
.src_info.data_width = STEDMA40_WORD_WIDTH,
|
|
.dst_info.data_width = STEDMA40_WORD_WIDTH,
|
|
};
|
|
#endif
|
|
|
|
static struct mmci_platform_data mop500_sdi1_data = {
|
|
.ocr_mask = MMC_VDD_29_30,
|
|
.f_max = 50000000,
|
|
.capabilities = MMC_CAP_4_BIT_DATA,
|
|
.gpio_cd = -1,
|
|
.gpio_wp = -1,
|
|
#ifdef CONFIG_STE_DMA40
|
|
.dma_filter = stedma40_filter,
|
|
.dma_rx_param = &sdi1_dma_cfg_rx,
|
|
.dma_tx_param = &sdi1_dma_cfg_tx,
|
|
#endif
|
|
};
|
|
|
|
/*
|
|
* SDI 2 (POP eMMC, not on DB8500ed)
|
|
*/
|
|
|
|
#ifdef CONFIG_STE_DMA40
|
|
struct stedma40_chan_cfg mop500_sdi2_dma_cfg_rx = {
|
|
.mode = STEDMA40_MODE_LOGICAL,
|
|
.dir = STEDMA40_PERIPH_TO_MEM,
|
|
.src_dev_type = DB8500_DMA_DEV28_SD_MM2_RX,
|
|
.dst_dev_type = STEDMA40_DEV_DST_MEMORY,
|
|
.src_info.data_width = STEDMA40_WORD_WIDTH,
|
|
.dst_info.data_width = STEDMA40_WORD_WIDTH,
|
|
};
|
|
|
|
static struct stedma40_chan_cfg mop500_sdi2_dma_cfg_tx = {
|
|
.mode = STEDMA40_MODE_LOGICAL,
|
|
.dir = STEDMA40_MEM_TO_PERIPH,
|
|
.src_dev_type = STEDMA40_DEV_SRC_MEMORY,
|
|
.dst_dev_type = DB8500_DMA_DEV28_SD_MM2_TX,
|
|
.src_info.data_width = STEDMA40_WORD_WIDTH,
|
|
.dst_info.data_width = STEDMA40_WORD_WIDTH,
|
|
};
|
|
#endif
|
|
|
|
static struct mmci_platform_data mop500_sdi2_data = {
|
|
.ocr_mask = MMC_VDD_165_195,
|
|
.f_max = 50000000,
|
|
.capabilities = MMC_CAP_4_BIT_DATA | MMC_CAP_8_BIT_DATA |
|
|
MMC_CAP_MMC_HIGHSPEED,
|
|
.gpio_cd = -1,
|
|
.gpio_wp = -1,
|
|
#ifdef CONFIG_STE_DMA40
|
|
.dma_filter = stedma40_filter,
|
|
.dma_rx_param = &mop500_sdi2_dma_cfg_rx,
|
|
.dma_tx_param = &mop500_sdi2_dma_cfg_tx,
|
|
#endif
|
|
};
|
|
|
|
/*
|
|
* SDI 4 (on-board eMMC)
|
|
*/
|
|
|
|
#ifdef CONFIG_STE_DMA40
|
|
struct stedma40_chan_cfg mop500_sdi4_dma_cfg_rx = {
|
|
.mode = STEDMA40_MODE_LOGICAL,
|
|
.dir = STEDMA40_PERIPH_TO_MEM,
|
|
.src_dev_type = DB8500_DMA_DEV42_SD_MM4_RX,
|
|
.dst_dev_type = STEDMA40_DEV_DST_MEMORY,
|
|
.src_info.data_width = STEDMA40_WORD_WIDTH,
|
|
.dst_info.data_width = STEDMA40_WORD_WIDTH,
|
|
};
|
|
|
|
static struct stedma40_chan_cfg mop500_sdi4_dma_cfg_tx = {
|
|
.mode = STEDMA40_MODE_LOGICAL,
|
|
.dir = STEDMA40_MEM_TO_PERIPH,
|
|
.src_dev_type = STEDMA40_DEV_SRC_MEMORY,
|
|
.dst_dev_type = DB8500_DMA_DEV42_SD_MM4_TX,
|
|
.src_info.data_width = STEDMA40_WORD_WIDTH,
|
|
.dst_info.data_width = STEDMA40_WORD_WIDTH,
|
|
};
|
|
#endif
|
|
|
|
static struct mmci_platform_data mop500_sdi4_data = {
|
|
.ocr_mask = MMC_VDD_29_30,
|
|
.f_max = 50000000,
|
|
.capabilities = MMC_CAP_4_BIT_DATA | MMC_CAP_8_BIT_DATA |
|
|
MMC_CAP_MMC_HIGHSPEED,
|
|
.gpio_cd = -1,
|
|
.gpio_wp = -1,
|
|
#ifdef CONFIG_STE_DMA40
|
|
.dma_filter = stedma40_filter,
|
|
.dma_rx_param = &mop500_sdi4_dma_cfg_rx,
|
|
.dma_tx_param = &mop500_sdi4_dma_cfg_tx,
|
|
#endif
|
|
};
|
|
|
|
void __init mop500_sdi_init(void)
|
|
{
|
|
/* PoP:ed eMMC */
|
|
db8500_add_sdi2(&mop500_sdi2_data, U8500_SDI_V2_PERIPHID);
|
|
/* On-board eMMC */
|
|
db8500_add_sdi4(&mop500_sdi4_data, U8500_SDI_V2_PERIPHID);
|
|
/*
|
|
* On boards with the TC35892 GPIO expander, sdi0 will finally
|
|
* be added when the TC35892 initializes and calls
|
|
* mop500_sdi_tc35892_init() above.
|
|
*/
|
|
}
|
|
|
|
void __init snowball_sdi_init(void)
|
|
{
|
|
/* On Snowball MMC_CAP_SD_HIGHSPEED isn't supported (Hardware issue?) */
|
|
mop500_sdi0_data.capabilities &= ~MMC_CAP_SD_HIGHSPEED;
|
|
/* On-board eMMC */
|
|
db8500_add_sdi4(&mop500_sdi4_data, U8500_SDI_V2_PERIPHID);
|
|
/* External Micro SD slot */
|
|
mop500_sdi0_data.gpio_cd = SNOWBALL_SDMMC_CD_GPIO;
|
|
mop500_sdi0_data.cd_invert = true;
|
|
sdi0_en = SNOWBALL_SDMMC_EN_GPIO;
|
|
sdi0_vsel = SNOWBALL_SDMMC_1V8_3V_GPIO;
|
|
sdi0_configure();
|
|
}
|
|
|
|
void __init hrefv60_sdi_init(void)
|
|
{
|
|
/* PoP:ed eMMC */
|
|
db8500_add_sdi2(&mop500_sdi2_data, U8500_SDI_V2_PERIPHID);
|
|
/* On-board eMMC */
|
|
db8500_add_sdi4(&mop500_sdi4_data, U8500_SDI_V2_PERIPHID);
|
|
/* External Micro SD slot */
|
|
mop500_sdi0_data.gpio_cd = HREFV60_SDMMC_CD_GPIO;
|
|
sdi0_en = HREFV60_SDMMC_EN_GPIO;
|
|
sdi0_vsel = HREFV60_SDMMC_1V8_3V_GPIO;
|
|
sdi0_configure();
|
|
/* WLAN SDIO channel */
|
|
db8500_add_sdi1(&mop500_sdi1_data, U8500_SDI_V2_PERIPHID);
|
|
}
|