2
0
mirror of https://github.com/edk2-porting/linux-next.git synced 2024-12-23 20:53:53 +08:00
linux-next/Documentation/devicetree/bindings/net/mscc-ocelot.txt
Antoine Tenart 744350b98c Documentation/bindings: net: ocelot: document the PTP ready IRQ
One additional interrupt needs to be described within the Ocelot device
tree node: the PTP ready one. This patch documents the binding needed to
do so.

Signed-off-by: Antoine Tenart <antoine.tenart@bootlin.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-08-15 16:31:11 -07:00

84 lines
2.3 KiB
Plaintext

Microsemi Ocelot network Switch
===============================
The Microsemi Ocelot network switch can be found on Microsemi SoCs (VSC7513,
VSC7514)
Required properties:
- compatible: Should be "mscc,vsc7514-switch"
- reg: Must contain an (offset, length) pair of the register set for each
entry in reg-names.
- reg-names: Must include the following entries:
- "sys"
- "rew"
- "qs"
- "ptp" (optional due to backward compatibility)
- "qsys"
- "ana"
- "portX" with X from 0 to the number of last port index available on that
switch
- interrupts: Should contain the switch interrupts for frame extraction,
frame injection and PTP ready.
- interrupt-names: should contain the interrupt names: "xtr", "inj". Can contain
"ptp_rdy" which is optional due to backward compatibility.
- ethernet-ports: A container for child nodes representing switch ports.
The ethernet-ports container has the following properties
Required properties:
- #address-cells: Must be 1
- #size-cells: Must be 0
Each port node must have the following mandatory properties:
- reg: Describes the port address in the switch
Port nodes may also contain the following optional standardised
properties, described in binding documents:
- phy-handle: Phandle to a PHY on an MDIO bus. See
Documentation/devicetree/bindings/net/ethernet.txt for details.
Example:
switch@1010000 {
compatible = "mscc,vsc7514-switch";
reg = <0x1010000 0x10000>,
<0x1030000 0x10000>,
<0x1080000 0x100>,
<0x10e0000 0x10000>,
<0x11e0000 0x100>,
<0x11f0000 0x100>,
<0x1200000 0x100>,
<0x1210000 0x100>,
<0x1220000 0x100>,
<0x1230000 0x100>,
<0x1240000 0x100>,
<0x1250000 0x100>,
<0x1260000 0x100>,
<0x1270000 0x100>,
<0x1280000 0x100>,
<0x1800000 0x80000>,
<0x1880000 0x10000>;
reg-names = "sys", "rew", "qs", "ptp", "port0", "port1",
"port2", "port3", "port4", "port5", "port6",
"port7", "port8", "port9", "port10", "qsys",
"ana";
interrupts = <18 21 22>;
interrupt-names = "ptp_rdy", "xtr", "inj";
ethernet-ports {
#address-cells = <1>;
#size-cells = <0>;
port0: port@0 {
reg = <0>;
phy-handle = <&phy0>;
};
port1: port@1 {
reg = <1>;
phy-handle = <&phy1>;
};
};
};