mirror of
https://github.com/edk2-porting/linux-next.git
synced 2024-12-23 20:53:53 +08:00
687e3d5550
As of_get_mac_address now supports NVMEM under the hood, we need to update the bindings documentation with the new nvmem-cell* properties, which would mean copy&pasting a lot of redundant information to every binding documentation currently referencing some of the MAC address properties. So I've just removed all the references to the optional MAC address properties and replaced them with the small note referencing net/ethernet.txt file. Signed-off-by: Petr Štetiar <ynezz@true.cz> Signed-off-by: David S. Miller <davem@davemloft.net>
61 lines
2.2 KiB
Plaintext
61 lines
2.2 KiB
Plaintext
Hisilicon hix5hd2 gmac controller
|
|
|
|
Required properties:
|
|
- compatible: should contain one of the following SoC strings:
|
|
* "hisilicon,hix5hd2-gmac"
|
|
* "hisilicon,hi3798cv200-gmac"
|
|
* "hisilicon,hi3516a-gmac"
|
|
and one of the following version string:
|
|
* "hisilicon,hisi-gmac-v1"
|
|
* "hisilicon,hisi-gmac-v2"
|
|
The version v1 includes SoCs hix5hd2.
|
|
The version v2 includes SoCs hi3798cv200, hi3516a.
|
|
- reg: specifies base physical address(s) and size of the device registers.
|
|
The first region is the MAC register base and size.
|
|
The second region is external interface control register.
|
|
- interrupts: should contain the MAC interrupt.
|
|
- #address-cells: must be <1>.
|
|
- #size-cells: must be <0>.
|
|
- phy-mode: see ethernet.txt [1].
|
|
- phy-handle: see ethernet.txt [1].
|
|
- clocks: clock phandle and specifier pair.
|
|
- clock-names: contain the clock name "mac_core"(required) and "mac_ifc"(optional).
|
|
- resets: should contain the phandle to the MAC core reset signal(optional),
|
|
the MAC interface reset signal(optional)
|
|
and the PHY reset signal(optional).
|
|
- reset-names: contain the reset signal name "mac_core"(optional),
|
|
"mac_ifc"(optional) and "phy"(optional).
|
|
- hisilicon,phy-reset-delays-us: triplet of delays if PHY reset signal given.
|
|
The 1st cell is reset pre-delay in micro seconds.
|
|
The 2nd cell is reset pulse in micro seconds.
|
|
The 3rd cell is reset post-delay in micro seconds.
|
|
|
|
The MAC address will be determined using the properties defined in
|
|
ethernet.txt[1].
|
|
|
|
- PHY subnode: inherits from phy binding [2]
|
|
|
|
[1] Documentation/devicetree/bindings/net/ethernet.txt
|
|
[2] Documentation/devicetree/bindings/net/phy.txt
|
|
|
|
Example:
|
|
gmac0: ethernet@f9840000 {
|
|
compatible = "hisilicon,hi3798cv200-gmac", "hisilicon,hisi-gmac-v2";
|
|
reg = <0xf9840000 0x1000>,<0xf984300c 0x4>;
|
|
interrupts = <0 71 4>;
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
phy-mode = "rgmii";
|
|
phy-handle = <&phy2>;
|
|
mac-address = [00 00 00 00 00 00];
|
|
clocks = <&crg HISTB_ETH0_MAC_CLK>, <&crg HISTB_ETH0_MACIF_CLK>;
|
|
clock-names = "mac_core", "mac_ifc";
|
|
resets = <&crg 0xcc 8>, <&crg 0xcc 10>, <&crg 0xcc 12>;
|
|
reset-names = "mac_core", "mac_ifc", "phy";
|
|
hisilicon,phy-reset-delays-us = <10000 10000 30000>;
|
|
|
|
phy2: ethernet-phy@2 {
|
|
reg = <2>;
|
|
};
|
|
};
|