mirror of
https://github.com/edk2-porting/linux-next.git
synced 2024-12-23 20:53:53 +08:00
042b86753a
Critically, the AST2600 requires ungating the RMII RCLK if e.g. NCSI is in use. Signed-off-by: Andrew Jeffery <andrew@aj.id.au> Acked-by: Joel Stanley <joel@jms.id.au> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
43 lines
1.5 KiB
Plaintext
43 lines
1.5 KiB
Plaintext
* Faraday Technology FTGMAC100 gigabit ethernet controller
|
|
|
|
Required properties:
|
|
- compatible: "faraday,ftgmac100"
|
|
|
|
Must also contain one of these if used as part of an Aspeed AST2400
|
|
or 2500 family SoC as they have some subtle tweaks to the
|
|
implementation:
|
|
|
|
- "aspeed,ast2400-mac"
|
|
- "aspeed,ast2500-mac"
|
|
- "aspeed,ast2600-mac"
|
|
|
|
- reg: Address and length of the register set for the device
|
|
- interrupts: Should contain ethernet controller interrupt
|
|
|
|
Optional properties:
|
|
- phy-mode: See ethernet.txt file in the same directory. If the property is
|
|
absent, "rgmii" is assumed. Supported values are "rgmii*" and "rmii" for
|
|
aspeed parts. Other (unknown) parts will accept any value.
|
|
- use-ncsi: Use the NC-SI stack instead of an MDIO PHY. Currently assumes
|
|
rmii (100bT) but kept as a separate property in case NC-SI grows support
|
|
for a gigabit link.
|
|
- no-hw-checksum: Used to disable HW checksum support. Here for backward
|
|
compatibility as the driver now should have correct defaults based on
|
|
the SoC.
|
|
- clocks: In accordance with the generic clock bindings. Must describe the MAC
|
|
IP clock, and optionally an RMII RCLK gate for the AST2500/AST2600. The
|
|
required MAC clock must be the first cell.
|
|
- clock-names:
|
|
|
|
- "MACCLK": The MAC IP clock
|
|
- "RCLK": Clock gate for the RMII RCLK
|
|
|
|
Example:
|
|
|
|
mac0: ethernet@1e660000 {
|
|
compatible = "aspeed,ast2500-mac", "faraday,ftgmac100";
|
|
reg = <0x1e660000 0x180>;
|
|
interrupts = <2>;
|
|
use-ncsi;
|
|
};
|