mirror of
https://github.com/edk2-porting/linux-next.git
synced 2024-12-23 20:53:53 +08:00
38085c987f
Some Qualcomm PMICs have a misc device that performs USB id pin detection via an interrupt. When the interrupt triggers, we should read the interrupt line to see if it has gone high or low. If the interrupt is low then the ID pin is grounded, and if the interrupt is high then the ID pin is being held high. Cc: Roger Quadros <rogerq@ti.com> Signed-off-by: Stephen Boyd <stephen.boyd@linaro.org> [cw00.choi: Edited the driver description and added the author information] Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
42 lines
893 B
Plaintext
42 lines
893 B
Plaintext
Qualcomm's PM8941 USB ID Extcon device
|
|
|
|
Some Qualcomm PMICs have a "misc" module that can be used to detect when
|
|
the USB ID pin has been pulled low or high.
|
|
|
|
PROPERTIES
|
|
|
|
- compatible:
|
|
Usage: required
|
|
Value type: <string>
|
|
Definition: Should contain "qcom,pm8941-misc";
|
|
|
|
- reg:
|
|
Usage: required
|
|
Value type: <u32>
|
|
Definition: Should contain the offset to the misc address space
|
|
|
|
- interrupts:
|
|
Usage: required
|
|
Value type: <prop-encoded-array>
|
|
Definition: Should contain the usb id interrupt
|
|
|
|
- interrupt-names:
|
|
Usage: required
|
|
Value type: <stringlist>
|
|
Definition: Should contain the string "usb_id" for the usb id interrupt
|
|
|
|
Example:
|
|
|
|
pmic {
|
|
usb_id: misc@900 {
|
|
compatible = "qcom,pm8941-misc";
|
|
reg = <0x900>;
|
|
interrupts = <0x0 0x9 0 IRQ_TYPE_EDGE_BOTH>;
|
|
interrupt-names = "usb_id";
|
|
};
|
|
}
|
|
|
|
usb-controller {
|
|
extcon = <&usb_id>;
|
|
};
|