2
0
mirror of https://github.com/edk2-porting/linux-next.git synced 2024-12-18 18:23:53 +08:00
linux-next/arch/arm/mach-tegra/sleep.h
Joseph Lo 33d5c01915 ARM: tegra114: add CPU hotplug support
The Tegra114 is a quad cores SoC. Each core can be hotplugged including
CPU0. The hotplug sequence can be controlled by setting event trigger in
flow controller. Then the flow controller will take care all the power
sequence that include CPU up and down.

Signed-off-by: Joseph Lo <josephl@nvidia.com>
Signed-off-by: Stephen Warren <swarren@nvidia.com>
2013-05-22 15:19:22 -06:00

173 lines
4.8 KiB
C

/*
* Copyright (c) 2010-2013, NVIDIA Corporation. All rights reserved.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms and conditions of the GNU General Public License,
* version 2, as published by the Free Software Foundation.
*
* This program is distributed in the hope it will be useful, but WITHOUT
* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
* FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
* more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#ifndef __MACH_TEGRA_SLEEP_H
#define __MACH_TEGRA_SLEEP_H
#include "iomap.h"
#define TEGRA_ARM_PERIF_VIRT (TEGRA_ARM_PERIF_BASE - IO_CPU_PHYS \
+ IO_CPU_VIRT)
#define TEGRA_FLOW_CTRL_VIRT (TEGRA_FLOW_CTRL_BASE - IO_PPSB_PHYS \
+ IO_PPSB_VIRT)
#define TEGRA_CLK_RESET_VIRT (TEGRA_CLK_RESET_BASE - IO_PPSB_PHYS \
+ IO_PPSB_VIRT)
#define TEGRA_APB_MISC_VIRT (TEGRA_APB_MISC_BASE - IO_APB_PHYS \
+ IO_APB_VIRT)
#define TEGRA_PMC_VIRT (TEGRA_PMC_BASE - IO_APB_PHYS + IO_APB_VIRT)
/* PMC_SCRATCH37-39 and 41 are used for tegra_pen_lock and idle */
#define PMC_SCRATCH37 0x130
#define PMC_SCRATCH38 0x134
#define PMC_SCRATCH39 0x138
#define PMC_SCRATCH41 0x140
#ifdef CONFIG_ARCH_TEGRA_2x_SOC
#define CPU_RESETTABLE 2
#define CPU_RESETTABLE_SOON 1
#define CPU_NOT_RESETTABLE 0
#endif
#ifdef __ASSEMBLY__
/* returns the offset of the flow controller halt register for a cpu */
.macro cpu_to_halt_reg rd, rcpu
cmp \rcpu, #0
subne \rd, \rcpu, #1
movne \rd, \rd, lsl #3
addne \rd, \rd, #0x14
moveq \rd, #0
.endm
/* returns the offset of the flow controller csr register for a cpu */
.macro cpu_to_csr_reg rd, rcpu
cmp \rcpu, #0
subne \rd, \rcpu, #1
movne \rd, \rd, lsl #3
addne \rd, \rd, #0x18
moveq \rd, #8
.endm
/* returns the ID of the current processor */
.macro cpu_id, rd
mrc p15, 0, \rd, c0, c0, 5
and \rd, \rd, #0xF
.endm
/* loads a 32-bit value into a register without a data access */
.macro mov32, reg, val
movw \reg, #:lower16:\val
movt \reg, #:upper16:\val
.endm
/* Marco to check CPU part num */
.macro check_cpu_part_num part_num, tmp1, tmp2
mrc p15, 0, \tmp1, c0, c0, 0
ubfx \tmp1, \tmp1, #4, #12
mov32 \tmp2, \part_num
cmp \tmp1, \tmp2
.endm
/* Macro to exit SMP coherency. */
.macro exit_smp, tmp1, tmp2
mrc p15, 0, \tmp1, c1, c0, 1 @ ACTLR
bic \tmp1, \tmp1, #(1<<6) | (1<<0) @ clear ACTLR.SMP | ACTLR.FW
mcr p15, 0, \tmp1, c1, c0, 1 @ ACTLR
isb
#ifdef CONFIG_HAVE_ARM_SCU
check_cpu_part_num 0xc09, \tmp1, \tmp2
mrceq p15, 0, \tmp1, c0, c0, 5
andeq \tmp1, \tmp1, #0xF
moveq \tmp1, \tmp1, lsl #2
moveq \tmp2, #0xf
moveq \tmp2, \tmp2, lsl \tmp1
ldreq \tmp1, =(TEGRA_ARM_PERIF_VIRT + 0xC)
streq \tmp2, [\tmp1] @ invalidate SCU tags for CPU
dsb
#endif
.endm
/* Macro to check Tegra revision */
#define APB_MISC_GP_HIDREV 0x804
.macro tegra_get_soc_id base, tmp1
mov32 \tmp1, \base
ldr \tmp1, [\tmp1, #APB_MISC_GP_HIDREV]
and \tmp1, \tmp1, #0xff00
mov \tmp1, \tmp1, lsr #8
.endm
/* Macro to resume & re-enable L2 cache */
#ifndef L2X0_CTRL_EN
#define L2X0_CTRL_EN 1
#endif
#ifdef CONFIG_CACHE_L2X0
.macro l2_cache_resume, tmp1, tmp2, tmp3, phys_l2x0_saved_regs
W(adr) \tmp1, \phys_l2x0_saved_regs
ldr \tmp1, [\tmp1]
ldr \tmp2, [\tmp1, #L2X0_R_PHY_BASE]
ldr \tmp3, [\tmp2, #L2X0_CTRL]
tst \tmp3, #L2X0_CTRL_EN
bne exit_l2_resume
ldr \tmp3, [\tmp1, #L2X0_R_TAG_LATENCY]
str \tmp3, [\tmp2, #L2X0_TAG_LATENCY_CTRL]
ldr \tmp3, [\tmp1, #L2X0_R_DATA_LATENCY]
str \tmp3, [\tmp2, #L2X0_DATA_LATENCY_CTRL]
ldr \tmp3, [\tmp1, #L2X0_R_PREFETCH_CTRL]
str \tmp3, [\tmp2, #L2X0_PREFETCH_CTRL]
ldr \tmp3, [\tmp1, #L2X0_R_PWR_CTRL]
str \tmp3, [\tmp2, #L2X0_POWER_CTRL]
ldr \tmp3, [\tmp1, #L2X0_R_AUX_CTRL]
str \tmp3, [\tmp2, #L2X0_AUX_CTRL]
mov \tmp3, #L2X0_CTRL_EN
str \tmp3, [\tmp2, #L2X0_CTRL]
exit_l2_resume:
.endm
#else /* CONFIG_CACHE_L2X0 */
.macro l2_cache_resume, tmp1, tmp2, tmp3, phys_l2x0_saved_regs
.endm
#endif /* CONFIG_CACHE_L2X0 */
#else
void tegra_pen_lock(void);
void tegra_pen_unlock(void);
void tegra_resume(void);
int tegra_sleep_cpu_finish(unsigned long);
void tegra_disable_clean_inv_dcache(void);
#ifdef CONFIG_HOTPLUG_CPU
void tegra20_hotplug_shutdown(void);
void tegra30_hotplug_shutdown(void);
void tegra_hotplug_init(void);
#else
static inline void tegra_hotplug_init(void) {}
#endif
void tegra20_cpu_shutdown(int cpu);
int tegra20_cpu_is_resettable_soon(void);
void tegra20_cpu_clear_resettable(void);
#ifdef CONFIG_ARCH_TEGRA_2x_SOC
void tegra20_cpu_set_resettable_soon(void);
#else
static inline void tegra20_cpu_set_resettable_soon(void) {}
#endif
int tegra20_sleep_cpu_secondary_finish(unsigned long);
void tegra20_tear_down_cpu(void);
int tegra30_sleep_cpu_secondary_finish(unsigned long);
void tegra30_tear_down_cpu(void);
#endif
#endif