mirror of
https://github.com/edk2-porting/linux-next.git
synced 2024-12-23 12:43:55 +08:00
79026ff2b6
This is needed to make module auto loading work. [dtor@mail.ru: remove file name from comment] Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
378 lines
8.5 KiB
C
378 lines
8.5 KiB
C
/*
|
|
* Touchscreen driver for the tps6507x chip.
|
|
*
|
|
* Copyright (c) 2009 RidgeRun (todd.fischer@ridgerun.com)
|
|
*
|
|
* Credits:
|
|
*
|
|
* Using code from tsc2007, MtekVision Co., Ltd.
|
|
*
|
|
* For licencing details see kernel-base/COPYING
|
|
*
|
|
* TPS65070, TPS65073, TPS650731, and TPS650732 support
|
|
* 10 bit touch screen interface.
|
|
*/
|
|
|
|
#include <linux/module.h>
|
|
#include <linux/workqueue.h>
|
|
#include <linux/slab.h>
|
|
#include <linux/input.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/mfd/tps6507x.h>
|
|
#include <linux/input/tps6507x-ts.h>
|
|
#include <linux/delay.h>
|
|
|
|
#define TSC_DEFAULT_POLL_PERIOD 30 /* ms */
|
|
#define TPS_DEFAULT_MIN_PRESSURE 0x30
|
|
#define MAX_10BIT ((1 << 10) - 1)
|
|
|
|
#define TPS6507X_ADCONFIG_CONVERT_TS (TPS6507X_ADCONFIG_AD_ENABLE | \
|
|
TPS6507X_ADCONFIG_START_CONVERSION | \
|
|
TPS6507X_ADCONFIG_INPUT_REAL_TSC)
|
|
#define TPS6507X_ADCONFIG_POWER_DOWN_TS (TPS6507X_ADCONFIG_INPUT_REAL_TSC)
|
|
|
|
struct ts_event {
|
|
u16 x;
|
|
u16 y;
|
|
u16 pressure;
|
|
};
|
|
|
|
struct tps6507x_ts {
|
|
struct input_dev *input_dev;
|
|
struct device *dev;
|
|
char phys[32];
|
|
struct delayed_work work;
|
|
unsigned polling; /* polling is active */
|
|
struct ts_event tc;
|
|
struct tps6507x_dev *mfd;
|
|
u16 model;
|
|
unsigned pendown;
|
|
int irq;
|
|
void (*clear_penirq)(void);
|
|
unsigned long poll_period; /* ms */
|
|
u16 min_pressure;
|
|
int vref; /* non-zero to leave vref on */
|
|
};
|
|
|
|
static int tps6507x_read_u8(struct tps6507x_ts *tsc, u8 reg, u8 *data)
|
|
{
|
|
int err;
|
|
|
|
err = tsc->mfd->read_dev(tsc->mfd, reg, 1, data);
|
|
|
|
if (err)
|
|
return err;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int tps6507x_write_u8(struct tps6507x_ts *tsc, u8 reg, u8 data)
|
|
{
|
|
return tsc->mfd->write_dev(tsc->mfd, reg, 1, &data);
|
|
}
|
|
|
|
static s32 tps6507x_adc_conversion(struct tps6507x_ts *tsc,
|
|
u8 tsc_mode, u16 *value)
|
|
{
|
|
s32 ret;
|
|
u8 adc_status;
|
|
u8 result;
|
|
|
|
/* Route input signal to A/D converter */
|
|
|
|
ret = tps6507x_write_u8(tsc, TPS6507X_REG_TSCMODE, tsc_mode);
|
|
if (ret) {
|
|
dev_err(tsc->dev, "TSC mode read failed\n");
|
|
goto err;
|
|
}
|
|
|
|
/* Start A/D conversion */
|
|
|
|
ret = tps6507x_write_u8(tsc, TPS6507X_REG_ADCONFIG,
|
|
TPS6507X_ADCONFIG_CONVERT_TS);
|
|
if (ret) {
|
|
dev_err(tsc->dev, "ADC config write failed\n");
|
|
return ret;
|
|
}
|
|
|
|
do {
|
|
ret = tps6507x_read_u8(tsc, TPS6507X_REG_ADCONFIG,
|
|
&adc_status);
|
|
if (ret) {
|
|
dev_err(tsc->dev, "ADC config read failed\n");
|
|
goto err;
|
|
}
|
|
} while (adc_status & TPS6507X_ADCONFIG_START_CONVERSION);
|
|
|
|
ret = tps6507x_read_u8(tsc, TPS6507X_REG_ADRESULT_2, &result);
|
|
if (ret) {
|
|
dev_err(tsc->dev, "ADC result 2 read failed\n");
|
|
goto err;
|
|
}
|
|
|
|
*value = (result & TPS6507X_REG_ADRESULT_2_MASK) << 8;
|
|
|
|
ret = tps6507x_read_u8(tsc, TPS6507X_REG_ADRESULT_1, &result);
|
|
if (ret) {
|
|
dev_err(tsc->dev, "ADC result 1 read failed\n");
|
|
goto err;
|
|
}
|
|
|
|
*value |= result;
|
|
|
|
dev_dbg(tsc->dev, "TSC channel %d = 0x%X\n", tsc_mode, *value);
|
|
|
|
err:
|
|
return ret;
|
|
}
|
|
|
|
/* Need to call tps6507x_adc_standby() after using A/D converter for the
|
|
* touch screen interrupt to work properly.
|
|
*/
|
|
|
|
static s32 tps6507x_adc_standby(struct tps6507x_ts *tsc)
|
|
{
|
|
s32 ret;
|
|
s32 loops = 0;
|
|
u8 val;
|
|
|
|
ret = tps6507x_write_u8(tsc, TPS6507X_REG_ADCONFIG,
|
|
TPS6507X_ADCONFIG_INPUT_TSC);
|
|
if (ret)
|
|
return ret;
|
|
|
|
ret = tps6507x_write_u8(tsc, TPS6507X_REG_TSCMODE,
|
|
TPS6507X_TSCMODE_STANDBY);
|
|
if (ret)
|
|
return ret;
|
|
|
|
ret = tps6507x_read_u8(tsc, TPS6507X_REG_INT, &val);
|
|
if (ret)
|
|
return ret;
|
|
|
|
while (val & TPS6507X_REG_TSC_INT) {
|
|
mdelay(10);
|
|
ret = tps6507x_read_u8(tsc, TPS6507X_REG_INT, &val);
|
|
if (ret)
|
|
return ret;
|
|
loops++;
|
|
}
|
|
|
|
return ret;
|
|
}
|
|
|
|
static void tps6507x_ts_handler(struct work_struct *work)
|
|
{
|
|
struct tps6507x_ts *tsc = container_of(work,
|
|
struct tps6507x_ts, work.work);
|
|
struct input_dev *input_dev = tsc->input_dev;
|
|
int pendown;
|
|
int schd;
|
|
int poll = 0;
|
|
s32 ret;
|
|
|
|
ret = tps6507x_adc_conversion(tsc, TPS6507X_TSCMODE_PRESSURE,
|
|
&tsc->tc.pressure);
|
|
if (ret)
|
|
goto done;
|
|
|
|
pendown = tsc->tc.pressure > tsc->min_pressure;
|
|
|
|
if (unlikely(!pendown && tsc->pendown)) {
|
|
dev_dbg(tsc->dev, "UP\n");
|
|
input_report_key(input_dev, BTN_TOUCH, 0);
|
|
input_report_abs(input_dev, ABS_PRESSURE, 0);
|
|
input_sync(input_dev);
|
|
tsc->pendown = 0;
|
|
}
|
|
|
|
if (pendown) {
|
|
|
|
if (!tsc->pendown) {
|
|
dev_dbg(tsc->dev, "DOWN\n");
|
|
input_report_key(input_dev, BTN_TOUCH, 1);
|
|
} else
|
|
dev_dbg(tsc->dev, "still down\n");
|
|
|
|
ret = tps6507x_adc_conversion(tsc, TPS6507X_TSCMODE_X_POSITION,
|
|
&tsc->tc.x);
|
|
if (ret)
|
|
goto done;
|
|
|
|
ret = tps6507x_adc_conversion(tsc, TPS6507X_TSCMODE_Y_POSITION,
|
|
&tsc->tc.y);
|
|
if (ret)
|
|
goto done;
|
|
|
|
input_report_abs(input_dev, ABS_X, tsc->tc.x);
|
|
input_report_abs(input_dev, ABS_Y, tsc->tc.y);
|
|
input_report_abs(input_dev, ABS_PRESSURE, tsc->tc.pressure);
|
|
input_sync(input_dev);
|
|
tsc->pendown = 1;
|
|
poll = 1;
|
|
}
|
|
|
|
done:
|
|
/* always poll if not using interrupts */
|
|
poll = 1;
|
|
|
|
if (poll) {
|
|
schd = schedule_delayed_work(&tsc->work,
|
|
msecs_to_jiffies(tsc->poll_period));
|
|
if (schd)
|
|
tsc->polling = 1;
|
|
else {
|
|
tsc->polling = 0;
|
|
dev_err(tsc->dev, "re-schedule failed");
|
|
}
|
|
} else
|
|
tsc->polling = 0;
|
|
|
|
ret = tps6507x_adc_standby(tsc);
|
|
}
|
|
|
|
static int tps6507x_ts_probe(struct platform_device *pdev)
|
|
{
|
|
int error;
|
|
struct tps6507x_ts *tsc;
|
|
struct tps6507x_dev *tps6507x_dev = dev_get_drvdata(pdev->dev.parent);
|
|
struct touchscreen_init_data *init_data;
|
|
struct input_dev *input_dev;
|
|
struct tps6507x_board *tps_board;
|
|
int schd;
|
|
|
|
/**
|
|
* tps_board points to pmic related constants
|
|
* coming from the board-evm file.
|
|
*/
|
|
|
|
tps_board = (struct tps6507x_board *)tps6507x_dev->dev->platform_data;
|
|
|
|
if (!tps_board) {
|
|
dev_err(tps6507x_dev->dev,
|
|
"Could not find tps6507x platform data\n");
|
|
return -EIO;
|
|
}
|
|
|
|
/**
|
|
* init_data points to array of regulator_init structures
|
|
* coming from the board-evm file.
|
|
*/
|
|
|
|
init_data = tps_board->tps6507x_ts_init_data;
|
|
|
|
tsc = kzalloc(sizeof(struct tps6507x_ts), GFP_KERNEL);
|
|
if (!tsc) {
|
|
dev_err(tps6507x_dev->dev, "failed to allocate driver data\n");
|
|
error = -ENOMEM;
|
|
goto err0;
|
|
}
|
|
|
|
tps6507x_dev->ts = tsc;
|
|
tsc->mfd = tps6507x_dev;
|
|
tsc->dev = tps6507x_dev->dev;
|
|
input_dev = input_allocate_device();
|
|
if (!input_dev) {
|
|
dev_err(tsc->dev, "Failed to allocate input device.\n");
|
|
error = -ENOMEM;
|
|
goto err1;
|
|
}
|
|
|
|
input_dev->evbit[0] = BIT_MASK(EV_KEY) | BIT_MASK(EV_ABS);
|
|
input_dev->keybit[BIT_WORD(BTN_TOUCH)] = BIT_MASK(BTN_TOUCH);
|
|
|
|
input_set_abs_params(input_dev, ABS_X, 0, MAX_10BIT, 0, 0);
|
|
input_set_abs_params(input_dev, ABS_Y, 0, MAX_10BIT, 0, 0);
|
|
input_set_abs_params(input_dev, ABS_PRESSURE, 0, MAX_10BIT, 0, 0);
|
|
|
|
input_dev->name = "TPS6507x Touchscreen";
|
|
input_dev->id.bustype = BUS_I2C;
|
|
input_dev->dev.parent = tsc->dev;
|
|
|
|
snprintf(tsc->phys, sizeof(tsc->phys),
|
|
"%s/input0", dev_name(tsc->dev));
|
|
input_dev->phys = tsc->phys;
|
|
|
|
dev_dbg(tsc->dev, "device: %s\n", input_dev->phys);
|
|
|
|
input_set_drvdata(input_dev, tsc);
|
|
|
|
tsc->input_dev = input_dev;
|
|
|
|
INIT_DELAYED_WORK(&tsc->work, tps6507x_ts_handler);
|
|
|
|
if (init_data) {
|
|
tsc->poll_period = init_data->poll_period;
|
|
tsc->vref = init_data->vref;
|
|
tsc->min_pressure = init_data->min_pressure;
|
|
input_dev->id.vendor = init_data->vendor;
|
|
input_dev->id.product = init_data->product;
|
|
input_dev->id.version = init_data->version;
|
|
} else {
|
|
tsc->poll_period = TSC_DEFAULT_POLL_PERIOD;
|
|
tsc->min_pressure = TPS_DEFAULT_MIN_PRESSURE;
|
|
}
|
|
|
|
error = tps6507x_adc_standby(tsc);
|
|
if (error)
|
|
goto err2;
|
|
|
|
error = input_register_device(input_dev);
|
|
if (error)
|
|
goto err2;
|
|
|
|
schd = schedule_delayed_work(&tsc->work,
|
|
msecs_to_jiffies(tsc->poll_period));
|
|
|
|
if (schd)
|
|
tsc->polling = 1;
|
|
else {
|
|
tsc->polling = 0;
|
|
dev_err(tsc->dev, "schedule failed");
|
|
goto err2;
|
|
}
|
|
platform_set_drvdata(pdev, tps6507x_dev);
|
|
|
|
return 0;
|
|
|
|
err2:
|
|
cancel_delayed_work_sync(&tsc->work);
|
|
input_free_device(input_dev);
|
|
err1:
|
|
kfree(tsc);
|
|
tps6507x_dev->ts = NULL;
|
|
err0:
|
|
return error;
|
|
}
|
|
|
|
static int __devexit tps6507x_ts_remove(struct platform_device *pdev)
|
|
{
|
|
struct tps6507x_dev *tps6507x_dev = platform_get_drvdata(pdev);
|
|
struct tps6507x_ts *tsc = tps6507x_dev->ts;
|
|
struct input_dev *input_dev = tsc->input_dev;
|
|
|
|
cancel_delayed_work_sync(&tsc->work);
|
|
|
|
input_unregister_device(input_dev);
|
|
|
|
tps6507x_dev->ts = NULL;
|
|
kfree(tsc);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static struct platform_driver tps6507x_ts_driver = {
|
|
.driver = {
|
|
.name = "tps6507x-ts",
|
|
.owner = THIS_MODULE,
|
|
},
|
|
.probe = tps6507x_ts_probe,
|
|
.remove = __devexit_p(tps6507x_ts_remove),
|
|
};
|
|
module_platform_driver(tps6507x_ts_driver);
|
|
|
|
MODULE_AUTHOR("Todd Fischer <todd.fischer@ridgerun.com>");
|
|
MODULE_DESCRIPTION("TPS6507x - TouchScreen driver");
|
|
MODULE_LICENSE("GPL v2");
|
|
MODULE_ALIAS("platform:tps6507x-ts");
|