mirror of
https://github.com/edk2-porting/linux-next.git
synced 2024-12-22 20:23:57 +08:00
71348bcaac
After a hardware module's clocks are enabled, Linux must wait for it to indicate readiness via its IDLEST bit before attempting to access the device, otherwise register accesses to the device may trigger an abort. This has traditionally been implemented in the clock framework, but this is the wrong place for it: the clock framework doesn't know which module clocks must be enabled for a module to leave idle; and if a module is not in smart-idle mode, it may never leave idle at all. This type of information is best stored in a per-hardware module data structure (coming in a following patch), rather than a per-clock data structure. The new code will use these new functions to handle waiting for modules to enable. Once hardware module data is filled in for all of the on-chip devices, the clock framework code to handle IDLEST waiting can be removed. Signed-off-by: Paul Walmsley <paul@pwsan.com>
132 lines
3.8 KiB
C
132 lines
3.8 KiB
C
#ifndef __ARCH_ASM_MACH_OMAP2_CM_H
|
|
#define __ARCH_ASM_MACH_OMAP2_CM_H
|
|
|
|
/*
|
|
* OMAP2/3 Clock Management (CM) register definitions
|
|
*
|
|
* Copyright (C) 2007-2008 Texas Instruments, Inc.
|
|
* Copyright (C) 2007-2008 Nokia Corporation
|
|
*
|
|
* Written by Paul Walmsley
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License version 2 as
|
|
* published by the Free Software Foundation.
|
|
*/
|
|
|
|
#include "prcm-common.h"
|
|
|
|
#define OMAP2420_CM_REGADDR(module, reg) \
|
|
OMAP2_IO_ADDRESS(OMAP2420_CM_BASE + (module) + (reg))
|
|
#define OMAP2430_CM_REGADDR(module, reg) \
|
|
OMAP2_IO_ADDRESS(OMAP2430_CM_BASE + (module) + (reg))
|
|
#define OMAP34XX_CM_REGADDR(module, reg) \
|
|
OMAP2_IO_ADDRESS(OMAP3430_CM_BASE + (module) + (reg))
|
|
|
|
/*
|
|
* Architecture-specific global CM registers
|
|
* Use cm_{read,write}_reg() with these registers.
|
|
* These registers appear once per CM module.
|
|
*/
|
|
|
|
#define OMAP3430_CM_REVISION OMAP34XX_CM_REGADDR(OCP_MOD, 0x0000)
|
|
#define OMAP3430_CM_SYSCONFIG OMAP34XX_CM_REGADDR(OCP_MOD, 0x0010)
|
|
#define OMAP3430_CM_POLCTRL OMAP34XX_CM_REGADDR(OCP_MOD, 0x009c)
|
|
|
|
#define OMAP3_CM_CLKOUT_CTRL_OFFSET 0x0070
|
|
#define OMAP3430_CM_CLKOUT_CTRL OMAP_CM_REGADDR(OMAP3430_CCR_MOD, 0x0070)
|
|
|
|
/*
|
|
* Module specific CM registers from CM_BASE + domain offset
|
|
* Use cm_{read,write}_mod_reg() with these registers.
|
|
* These register offsets generally appear in more than one PRCM submodule.
|
|
*/
|
|
|
|
/* Common between 24xx and 34xx */
|
|
|
|
#define CM_FCLKEN 0x0000
|
|
#define CM_FCLKEN1 CM_FCLKEN
|
|
#define CM_CLKEN CM_FCLKEN
|
|
#define CM_ICLKEN 0x0010
|
|
#define CM_ICLKEN1 CM_ICLKEN
|
|
#define CM_ICLKEN2 0x0014
|
|
#define CM_ICLKEN3 0x0018
|
|
#define CM_IDLEST 0x0020
|
|
#define CM_IDLEST1 CM_IDLEST
|
|
#define CM_IDLEST2 0x0024
|
|
#define CM_AUTOIDLE 0x0030
|
|
#define CM_AUTOIDLE1 CM_AUTOIDLE
|
|
#define CM_AUTOIDLE2 0x0034
|
|
#define CM_AUTOIDLE3 0x0038
|
|
#define CM_CLKSEL 0x0040
|
|
#define CM_CLKSEL1 CM_CLKSEL
|
|
#define CM_CLKSEL2 0x0044
|
|
#define CM_CLKSTCTRL 0x0048
|
|
|
|
|
|
/* Architecture-specific registers */
|
|
|
|
#define OMAP24XX_CM_FCLKEN2 0x0004
|
|
#define OMAP24XX_CM_ICLKEN4 0x001c
|
|
#define OMAP24XX_CM_AUTOIDLE4 0x003c
|
|
|
|
#define OMAP2430_CM_IDLEST3 0x0028
|
|
|
|
#define OMAP3430_CM_CLKEN_PLL 0x0004
|
|
#define OMAP3430ES2_CM_CLKEN2 0x0004
|
|
#define OMAP3430ES2_CM_FCLKEN3 0x0008
|
|
#define OMAP3430_CM_IDLEST_PLL CM_IDLEST2
|
|
#define OMAP3430_CM_AUTOIDLE_PLL CM_AUTOIDLE2
|
|
#define OMAP3430ES2_CM_AUTOIDLE2_PLL CM_AUTOIDLE2
|
|
#define OMAP3430_CM_CLKSEL1 CM_CLKSEL
|
|
#define OMAP3430_CM_CLKSEL1_PLL CM_CLKSEL
|
|
#define OMAP3430_CM_CLKSEL2_PLL CM_CLKSEL2
|
|
#define OMAP3430_CM_SLEEPDEP CM_CLKSEL2
|
|
#define OMAP3430_CM_CLKSEL3 CM_CLKSTCTRL
|
|
#define OMAP3430_CM_CLKSTST 0x004c
|
|
#define OMAP3430ES2_CM_CLKSEL4 0x004c
|
|
#define OMAP3430ES2_CM_CLKSEL5 0x0050
|
|
#define OMAP3430_CM_CLKSEL2_EMU 0x0050
|
|
#define OMAP3430_CM_CLKSEL3_EMU 0x0054
|
|
|
|
|
|
/* Clock management domain register get/set */
|
|
|
|
#ifndef __ASSEMBLER__
|
|
|
|
extern u32 cm_read_mod_reg(s16 module, u16 idx);
|
|
extern void cm_write_mod_reg(u32 val, s16 module, u16 idx);
|
|
extern u32 cm_rmw_mod_reg_bits(u32 mask, u32 bits, s16 module, s16 idx);
|
|
|
|
extern int omap2_cm_wait_module_ready(s16 prcm_mod, u8 idlest_id,
|
|
u8 idlest_shift);
|
|
extern int omap4_cm_wait_module_ready(u32 prcm_mod, u8 prcm_dev_offs);
|
|
|
|
static inline u32 cm_set_mod_reg_bits(u32 bits, s16 module, s16 idx)
|
|
{
|
|
return cm_rmw_mod_reg_bits(bits, bits, module, idx);
|
|
}
|
|
|
|
static inline u32 cm_clear_mod_reg_bits(u32 bits, s16 module, s16 idx)
|
|
{
|
|
return cm_rmw_mod_reg_bits(bits, 0x0, module, idx);
|
|
}
|
|
|
|
#endif
|
|
|
|
/* CM register bits shared between 24XX and 3430 */
|
|
|
|
/* CM_CLKSEL_GFX */
|
|
#define OMAP_CLKSEL_GFX_SHIFT 0
|
|
#define OMAP_CLKSEL_GFX_MASK (0x7 << 0)
|
|
|
|
/* CM_ICLKEN_GFX */
|
|
#define OMAP_EN_GFX_SHIFT 0
|
|
#define OMAP_EN_GFX (1 << 0)
|
|
|
|
/* CM_IDLEST_GFX */
|
|
#define OMAP_ST_GFX (1 << 0)
|
|
|
|
|
|
#endif
|