2
0
mirror of https://github.com/edk2-porting/linux-next.git synced 2024-12-21 11:44:01 +08:00
linux-next/include/linux/async_tx.h
Dan Williams 0a82a6239b async_tx: add support for asynchronous RAID6 recovery operations
async_raid6_2data_recov() recovers two data disk failures

 async_raid6_datap_recov() recovers a data disk and the P disk

These routines are a port of the synchronous versions found in
drivers/md/raid6recov.c.  The primary difference is breaking out the xor
operations into separate calls to async_xor.  Two helper routines are
introduced to perform scalar multiplication where needed.
async_sum_product() multiplies two sources by scalar coefficients and
then sums (xor) the result.  async_mult() simply multiplies a single
source by a scalar.

This implemention also includes, in contrast to the original
synchronous-only code, special case handling for the 4-disk and 5-disk
array cases.  In these situations the default N-disk algorithm will
present 0-source or 1-source operations to dma devices.  To cover for
dma devices where the minimum source count is 2 we implement 4-disk and
5-disk handling in the recovery code.

[ Impact: asynchronous raid6 recovery routines for 2data and datap cases ]

Cc: Yuri Tikhonov <yur@emcraft.com>
Cc: Ilya Yanok <yanok@emcraft.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: David Woodhouse <David.Woodhouse@intel.com>
Reviewed-by: Andre Noll <maan@systemlinux.org>
Acked-by: Maciej Sosnowski <maciej.sosnowski@intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2009-08-29 19:09:27 -07:00

207 lines
6.6 KiB
C

/*
* Copyright © 2006, Intel Corporation.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms and conditions of the GNU General Public License,
* version 2, as published by the Free Software Foundation.
*
* This program is distributed in the hope it will be useful, but WITHOUT
* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
* FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
* more details.
*
* You should have received a copy of the GNU General Public License along with
* this program; if not, write to the Free Software Foundation, Inc.,
* 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
*
*/
#ifndef _ASYNC_TX_H_
#define _ASYNC_TX_H_
#include <linux/dmaengine.h>
#include <linux/spinlock.h>
#include <linux/interrupt.h>
/* on architectures without dma-mapping capabilities we need to ensure
* that the asynchronous path compiles away
*/
#ifdef CONFIG_HAS_DMA
#define __async_inline
#else
#define __async_inline __always_inline
#endif
/**
* dma_chan_ref - object used to manage dma channels received from the
* dmaengine core.
* @chan - the channel being tracked
* @node - node for the channel to be placed on async_tx_master_list
* @rcu - for list_del_rcu
* @count - number of times this channel is listed in the pool
* (for channels with multiple capabiities)
*/
struct dma_chan_ref {
struct dma_chan *chan;
struct list_head node;
struct rcu_head rcu;
atomic_t count;
};
/**
* async_tx_flags - modifiers for the async_* calls
* @ASYNC_TX_XOR_ZERO_DST: this flag must be used for xor operations where the
* the destination address is not a source. The asynchronous case handles this
* implicitly, the synchronous case needs to zero the destination block.
* @ASYNC_TX_XOR_DROP_DST: this flag must be used if the destination address is
* also one of the source addresses. In the synchronous case the destination
* address is an implied source, whereas the asynchronous case it must be listed
* as a source. The destination address must be the first address in the source
* array.
* @ASYNC_TX_ACK: immediately ack the descriptor, precludes setting up a
* dependency chain
*/
enum async_tx_flags {
ASYNC_TX_XOR_ZERO_DST = (1 << 0),
ASYNC_TX_XOR_DROP_DST = (1 << 1),
ASYNC_TX_ACK = (1 << 2),
};
/**
* struct async_submit_ctl - async_tx submission/completion modifiers
* @flags: submission modifiers
* @depend_tx: parent dependency of the current operation being submitted
* @cb_fn: callback routine to run at operation completion
* @cb_param: parameter for the callback routine
* @scribble: caller provided space for dma/page address conversions
*/
struct async_submit_ctl {
enum async_tx_flags flags;
struct dma_async_tx_descriptor *depend_tx;
dma_async_tx_callback cb_fn;
void *cb_param;
void *scribble;
};
#ifdef CONFIG_DMA_ENGINE
#define async_tx_issue_pending_all dma_issue_pending_all
/**
* async_tx_issue_pending - send pending descriptor to the hardware channel
* @tx: descriptor handle to retrieve hardware context
*
* Note: any dependent operations will have already been issued by
* async_tx_channel_switch, or (in the case of no channel switch) will
* be already pending on this channel.
*/
static inline void async_tx_issue_pending(struct dma_async_tx_descriptor *tx)
{
if (likely(tx)) {
struct dma_chan *chan = tx->chan;
struct dma_device *dma = chan->device;
dma->device_issue_pending(chan);
}
}
#ifdef CONFIG_ARCH_HAS_ASYNC_TX_FIND_CHANNEL
#include <asm/async_tx.h>
#else
#define async_tx_find_channel(dep, type, dst, dst_count, src, src_count, len) \
__async_tx_find_channel(dep, type)
struct dma_chan *
__async_tx_find_channel(struct async_submit_ctl *submit,
enum dma_transaction_type tx_type);
#endif /* CONFIG_ARCH_HAS_ASYNC_TX_FIND_CHANNEL */
#else
static inline void async_tx_issue_pending_all(void)
{
do { } while (0);
}
static inline void async_tx_issue_pending(struct dma_async_tx_descriptor *tx)
{
do { } while (0);
}
static inline struct dma_chan *
async_tx_find_channel(struct async_submit_ctl *submit,
enum dma_transaction_type tx_type, struct page **dst,
int dst_count, struct page **src, int src_count,
size_t len)
{
return NULL;
}
#endif
/**
* async_tx_sync_epilog - actions to take if an operation is run synchronously
* @cb_fn: function to call when the transaction completes
* @cb_fn_param: parameter to pass to the callback routine
*/
static inline void
async_tx_sync_epilog(struct async_submit_ctl *submit)
{
if (submit->cb_fn)
submit->cb_fn(submit->cb_param);
}
typedef union {
unsigned long addr;
struct page *page;
dma_addr_t dma;
} addr_conv_t;
static inline void
init_async_submit(struct async_submit_ctl *args, enum async_tx_flags flags,
struct dma_async_tx_descriptor *tx,
dma_async_tx_callback cb_fn, void *cb_param,
addr_conv_t *scribble)
{
args->flags = flags;
args->depend_tx = tx;
args->cb_fn = cb_fn;
args->cb_param = cb_param;
args->scribble = scribble;
}
void async_tx_submit(struct dma_chan *chan, struct dma_async_tx_descriptor *tx,
struct async_submit_ctl *submit);
struct dma_async_tx_descriptor *
async_xor(struct page *dest, struct page **src_list, unsigned int offset,
int src_cnt, size_t len, struct async_submit_ctl *submit);
struct dma_async_tx_descriptor *
async_xor_val(struct page *dest, struct page **src_list, unsigned int offset,
int src_cnt, size_t len, enum sum_check_flags *result,
struct async_submit_ctl *submit);
struct dma_async_tx_descriptor *
async_memcpy(struct page *dest, struct page *src, unsigned int dest_offset,
unsigned int src_offset, size_t len,
struct async_submit_ctl *submit);
struct dma_async_tx_descriptor *
async_memset(struct page *dest, int val, unsigned int offset,
size_t len, struct async_submit_ctl *submit);
struct dma_async_tx_descriptor *async_trigger_callback(struct async_submit_ctl *submit);
struct dma_async_tx_descriptor *
async_gen_syndrome(struct page **blocks, unsigned int offset, int src_cnt,
size_t len, struct async_submit_ctl *submit);
struct dma_async_tx_descriptor *
async_syndrome_val(struct page **blocks, unsigned int offset, int src_cnt,
size_t len, enum sum_check_flags *pqres, struct page *spare,
struct async_submit_ctl *submit);
struct dma_async_tx_descriptor *
async_raid6_2data_recov(int src_num, size_t bytes, int faila, int failb,
struct page **ptrs, struct async_submit_ctl *submit);
struct dma_async_tx_descriptor *
async_raid6_datap_recov(int src_num, size_t bytes, int faila,
struct page **ptrs, struct async_submit_ctl *submit);
void async_tx_quiesce(struct dma_async_tx_descriptor **tx);
#endif /* _ASYNC_TX_H_ */